u-boot-brain/board/xilinx/zynqmp/zynqmp.c
Mike Looijmans dfbe492ede board: zynqmp: Fix for wrong AMS setting by ROM
A bug in the ZynqMP bootrom sets the PS_SYSMON_ANALOG_BUS register
at 0xFFA50914 to the wrong value 0x3201. This causes the AMS to
exchange the PS supply voltages 0 and 1. On Xilinx boards this is
not noticeable since these are tied together, it's only really
noticeable if banks 500 and 501 have different supplies. Xilinx' tech
support reported this undocumented register to be the cause, and
this patch applies a fix for all boards by programming the correct
value.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24 13:11:08 +02:00

728 lines
14 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2014 - 2015 Xilinx, Inc.
* Michal Simek <michal.simek@xilinx.com>
*/
#include <common.h>
#include <command.h>
#include <cpu_func.h>
#include <debug_uart.h>
#include <env.h>
#include <init.h>
#include <log.h>
#include <net.h>
#include <sata.h>
#include <ahci.h>
#include <scsi.h>
#include <malloc.h>
#include <wdt.h>
#include <asm/arch/clk.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/psu_init_gpl.h>
#include <asm/cache.h>
#include <asm/io.h>
#include <asm/ptrace.h>
#include <dm/device.h>
#include <dm/uclass.h>
#include <usb.h>
#include <dwc3-uboot.h>
#include <zynqmppl.h>
#include <zynqmp_firmware.h>
#include <g_dnl.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/sizes.h>
#include "../common/board.h"
#include "pm_cfg_obj.h"
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
!defined(CONFIG_SPL_BUILD)
static xilinx_desc zynqmppl = XILINX_ZYNQMP_DESC;
static const struct {
u32 id;
u32 ver;
char *name;
bool evexists;
} zynqmp_devices[] = {
{
.id = 0x10,
.name = "3eg",
},
{
.id = 0x10,
.ver = 0x2c,
.name = "3cg",
},
{
.id = 0x11,
.name = "2eg",
},
{
.id = 0x11,
.ver = 0x2c,
.name = "2cg",
},
{
.id = 0x20,
.name = "5ev",
.evexists = 1,
},
{
.id = 0x20,
.ver = 0x100,
.name = "5eg",
.evexists = 1,
},
{
.id = 0x20,
.ver = 0x12c,
.name = "5cg",
.evexists = 1,
},
{
.id = 0x21,
.name = "4ev",
.evexists = 1,
},
{
.id = 0x21,
.ver = 0x100,
.name = "4eg",
.evexists = 1,
},
{
.id = 0x21,
.ver = 0x12c,
.name = "4cg",
.evexists = 1,
},
{
.id = 0x30,
.name = "7ev",
.evexists = 1,
},
{
.id = 0x30,
.ver = 0x100,
.name = "7eg",
.evexists = 1,
},
{
.id = 0x30,
.ver = 0x12c,
.name = "7cg",
.evexists = 1,
},
{
.id = 0x38,
.name = "9eg",
},
{
.id = 0x38,
.ver = 0x2c,
.name = "9cg",
},
{
.id = 0x39,
.name = "6eg",
},
{
.id = 0x39,
.ver = 0x2c,
.name = "6cg",
},
{
.id = 0x40,
.name = "11eg",
},
{ /* For testing purpose only */
.id = 0x50,
.ver = 0x2c,
.name = "15cg",
},
{
.id = 0x50,
.name = "15eg",
},
{
.id = 0x58,
.name = "19eg",
},
{
.id = 0x59,
.name = "17eg",
},
{
.id = 0x61,
.name = "21dr",
},
{
.id = 0x63,
.name = "23dr",
},
{
.id = 0x65,
.name = "25dr",
},
{
.id = 0x64,
.name = "27dr",
},
{
.id = 0x60,
.name = "28dr",
},
{
.id = 0x62,
.name = "29dr",
},
{
.id = 0x66,
.name = "39dr",
},
{
.id = 0x7b,
.name = "48dr",
},
{
.id = 0x7e,
.name = "49dr",
},
};
#endif
int chip_id(unsigned char id)
{
struct pt_regs regs;
int val = -EINVAL;
if (current_el() != 3) {
regs.regs[0] = ZYNQMP_SIP_SVC_CSU_DMA_CHIPID;
regs.regs[1] = 0;
regs.regs[2] = 0;
regs.regs[3] = 0;
smc_call(&regs);
/*
* SMC returns:
* regs[0][31:0] = status of the operation
* regs[0][63:32] = CSU.IDCODE register
* regs[1][31:0] = CSU.version register
* regs[1][63:32] = CSU.IDCODE2 register
*/
switch (id) {
case IDCODE:
regs.regs[0] = upper_32_bits(regs.regs[0]);
regs.regs[0] &= ZYNQMP_CSU_IDCODE_DEVICE_CODE_MASK |
ZYNQMP_CSU_IDCODE_SVD_MASK;
regs.regs[0] >>= ZYNQMP_CSU_IDCODE_SVD_SHIFT;
val = regs.regs[0];
break;
case VERSION:
regs.regs[1] = lower_32_bits(regs.regs[1]);
regs.regs[1] &= ZYNQMP_CSU_SILICON_VER_MASK;
val = regs.regs[1];
break;
case IDCODE2:
regs.regs[1] = lower_32_bits(regs.regs[1]);
regs.regs[1] >>= ZYNQMP_CSU_VERSION_EMPTY_SHIFT;
val = regs.regs[1];
break;
default:
printf("%s, Invalid Req:0x%x\n", __func__, id);
}
} else {
switch (id) {
case IDCODE:
val = readl(ZYNQMP_CSU_IDCODE_ADDR);
val &= ZYNQMP_CSU_IDCODE_DEVICE_CODE_MASK |
ZYNQMP_CSU_IDCODE_SVD_MASK;
val >>= ZYNQMP_CSU_IDCODE_SVD_SHIFT;
break;
case VERSION:
val = readl(ZYNQMP_CSU_VER_ADDR);
val &= ZYNQMP_CSU_SILICON_VER_MASK;
break;
default:
printf("%s, Invalid Req:0x%x\n", __func__, id);
}
}
return val;
}
#define ZYNQMP_VERSION_SIZE 9
#define ZYNQMP_PL_STATUS_BIT 9
#define ZYNQMP_IPDIS_VCU_BIT 8
#define ZYNQMP_PL_STATUS_MASK BIT(ZYNQMP_PL_STATUS_BIT)
#define ZYNQMP_CSU_VERSION_MASK ~(ZYNQMP_PL_STATUS_MASK)
#define ZYNQMP_CSU_VCUDIS_VER_MASK ZYNQMP_CSU_VERSION_MASK & \
~BIT(ZYNQMP_IPDIS_VCU_BIT)
#define MAX_VARIANTS_EV 3
#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
!defined(CONFIG_SPL_BUILD)
static char *zynqmp_get_silicon_idcode_name(void)
{
u32 i, id, ver, j;
char *buf;
static char name[ZYNQMP_VERSION_SIZE];
id = chip_id(IDCODE);
ver = chip_id(IDCODE2);
for (i = 0; i < ARRAY_SIZE(zynqmp_devices); i++) {
if (zynqmp_devices[i].id == id) {
if (zynqmp_devices[i].evexists &&
!(ver & ZYNQMP_PL_STATUS_MASK))
break;
if (zynqmp_devices[i].ver == (ver &
ZYNQMP_CSU_VERSION_MASK))
break;
}
}
if (i >= ARRAY_SIZE(zynqmp_devices))
return "unknown";
strncat(name, "zu", 2);
if (!zynqmp_devices[i].evexists ||
(ver & ZYNQMP_PL_STATUS_MASK)) {
strncat(name, zynqmp_devices[i].name,
ZYNQMP_VERSION_SIZE - 3);
return name;
}
/*
* Here we are means, PL not powered up and ev variant
* exists. So, we need to ignore VCU disable bit(8) in
* version and findout if its CG or EG/EV variant.
*/
for (j = 0; j < MAX_VARIANTS_EV; j++, i++) {
if ((zynqmp_devices[i].ver & ~BIT(ZYNQMP_IPDIS_VCU_BIT)) ==
(ver & ZYNQMP_CSU_VCUDIS_VER_MASK)) {
strncat(name, zynqmp_devices[i].name,
ZYNQMP_VERSION_SIZE - 3);
break;
}
}
if (j >= MAX_VARIANTS_EV)
return "unknown";
if (strstr(name, "eg") || strstr(name, "ev")) {
buf = strstr(name, "e");
*buf = '\0';
}
return name;
}
#endif
int board_early_init_f(void)
{
#if defined(CONFIG_ZYNQMP_PSU_INIT_ENABLED)
int ret;
ret = psu_init();
if (ret)
return ret;
/* Delay is required for clocks to be propagated */
udelay(1000000);
#endif
#ifdef CONFIG_DEBUG_UART
/* Uart debug for sure */
debug_uart_init();
puts("Debug uart enabled\n"); /* or printch() */
#endif
return 0;
}
static int multi_boot(void)
{
u32 multiboot;
multiboot = readl(&csu_base->multi_boot);
printf("Multiboot:\t%x\n", multiboot);
return 0;
}
#define PS_SYSMON_ANALOG_BUS_VAL 0x3210
#define PS_SYSMON_ANALOG_BUS_REG 0xFFA50914
int board_init(void)
{
#if defined(CONFIG_ZYNQMP_FIRMWARE)
struct udevice *dev;
uclass_get_device_by_name(UCLASS_FIRMWARE, "zynqmp-power", &dev);
if (!dev)
panic("PMU Firmware device not found - Enable it");
#endif
#if defined(CONFIG_SPL_BUILD)
/* Check *at build time* if the filename is an non-empty string */
if (sizeof(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE) > 1)
zynqmp_pmufw_load_config_object(zynqmp_pm_cfg_obj,
zynqmp_pm_cfg_obj_size);
#endif
printf("EL Level:\tEL%d\n", current_el());
/* Bug in ROM sets wrong value in this register */
writel(PS_SYSMON_ANALOG_BUS_VAL, PS_SYSMON_ANALOG_BUS_REG);
#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
!defined(CONFIG_SPL_BUILD) || (defined(CONFIG_SPL_FPGA_SUPPORT) && \
defined(CONFIG_SPL_BUILD))
if (current_el() != 3) {
zynqmppl.name = zynqmp_get_silicon_idcode_name();
printf("Chip ID:\t%s\n", zynqmppl.name);
fpga_init();
fpga_add(fpga_xilinx, &zynqmppl);
}
#endif
if (current_el() == 3)
multi_boot();
return 0;
}
int board_early_init_r(void)
{
u32 val;
if (current_el() != 3)
return 0;
val = readl(&crlapb_base->timestamp_ref_ctrl);
val &= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT;
if (!val) {
val = readl(&crlapb_base->timestamp_ref_ctrl);
val |= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT;
writel(val, &crlapb_base->timestamp_ref_ctrl);
/* Program freq register in System counter */
writel(zynqmp_get_system_timer_freq(),
&iou_scntr_secure->base_frequency_id_register);
/* And enable system counter */
writel(ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_EN,
&iou_scntr_secure->counter_control_register);
}
return 0;
}
unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc,
char *const argv[])
{
int ret = 0;
if (current_el() > 1) {
smp_kick_all_cpus();
dcache_disable();
armv8_switch_to_el1(0x0, 0, 0, 0, (unsigned long)entry,
ES_TO_AARCH64);
} else {
printf("FAIL: current EL is not above EL1\n");
ret = EINVAL;
}
return ret;
}
#if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE)
int dram_init_banksize(void)
{
int ret;
ret = fdtdec_setup_memory_banksize();
if (ret)
return ret;
mem_map_fill();
return 0;
}
int dram_init(void)
{
if (fdtdec_setup_mem_size_base() != 0)
return -EINVAL;
return 0;
}
#else
int dram_init_banksize(void)
{
#if defined(CONFIG_NR_DRAM_BANKS)
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_dram[0].size = get_effective_memsize();
#endif
mem_map_fill();
return 0;
}
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_SYS_SDRAM_SIZE);
return 0;
}
#endif
void reset_cpu(ulong addr)
{
}
#if defined(CONFIG_BOARD_LATE_INIT)
static const struct {
u32 bit;
const char *name;
} reset_reasons[] = {
{ RESET_REASON_DEBUG_SYS, "DEBUG" },
{ RESET_REASON_SOFT, "SOFT" },
{ RESET_REASON_SRST, "SRST" },
{ RESET_REASON_PSONLY, "PS-ONLY" },
{ RESET_REASON_PMU, "PMU" },
{ RESET_REASON_INTERNAL, "INTERNAL" },
{ RESET_REASON_EXTERNAL, "EXTERNAL" },
{}
};
static int reset_reason(void)
{
u32 reg;
int i, ret;
const char *reason = NULL;
ret = zynqmp_mmio_read((ulong)&crlapb_base->reset_reason, &reg);
if (ret)
return -EINVAL;
puts("Reset reason:\t");
for (i = 0; i < ARRAY_SIZE(reset_reasons); i++) {
if (reg & reset_reasons[i].bit) {
reason = reset_reasons[i].name;
printf("%s ", reset_reasons[i].name);
break;
}
}
puts("\n");
env_set("reset_reason", reason);
ret = zynqmp_mmio_write((ulong)&crlapb_base->reset_reason, ~0, ~0);
if (ret)
return -EINVAL;
return ret;
}
static int set_fdtfile(void)
{
char *compatible, *fdtfile;
const char *suffix = ".dtb";
const char *vendor = "xilinx/";
if (env_get("fdtfile"))
return 0;
compatible = (char *)fdt_getprop(gd->fdt_blob, 0, "compatible", NULL);
if (compatible) {
debug("Compatible: %s\n", compatible);
/* Discard vendor prefix */
strsep(&compatible, ",");
fdtfile = calloc(1, strlen(vendor) + strlen(compatible) +
strlen(suffix) + 1);
if (!fdtfile)
return -ENOMEM;
sprintf(fdtfile, "%s%s%s", vendor, compatible, suffix);
env_set("fdtfile", fdtfile);
free(fdtfile);
}
return 0;
}
static u8 zynqmp_get_bootmode(void)
{
u8 bootmode;
u32 reg = 0;
int ret;
ret = zynqmp_mmio_read((ulong)&crlapb_base->boot_mode, &reg);
if (ret)
return -EINVAL;
if (reg >> BOOT_MODE_ALT_SHIFT)
reg >>= BOOT_MODE_ALT_SHIFT;
bootmode = reg & BOOT_MODES_MASK;
return bootmode;
}
int board_late_init(void)
{
u8 bootmode;
struct udevice *dev;
int bootseq = -1;
int bootseq_len = 0;
int env_targets_len = 0;
const char *mode;
char *new_targets;
char *env_targets;
int ret;
#if defined(CONFIG_USB_ETHER) && !defined(CONFIG_USB_GADGET_DOWNLOAD)
usb_ether_init();
#endif
if (!(gd->flags & GD_FLG_ENV_DEFAULT)) {
debug("Saved variables - Skipping\n");
return 0;
}
ret = set_fdtfile();
if (ret)
return ret;
bootmode = zynqmp_get_bootmode();
puts("Bootmode: ");
switch (bootmode) {
case USB_MODE:
puts("USB_MODE\n");
mode = "usb";
env_set("modeboot", "usb_dfu_spl");
break;
case JTAG_MODE:
puts("JTAG_MODE\n");
mode = "jtag pxe dhcp";
env_set("modeboot", "jtagboot");
break;
case QSPI_MODE_24BIT:
case QSPI_MODE_32BIT:
mode = "qspi0";
puts("QSPI_MODE\n");
env_set("modeboot", "qspiboot");
break;
case EMMC_MODE:
puts("EMMC_MODE\n");
if (uclass_get_device_by_name(UCLASS_MMC,
"mmc@ff160000", &dev) &&
uclass_get_device_by_name(UCLASS_MMC,
"sdhci@ff160000", &dev)) {
puts("Boot from EMMC but without SD0 enabled!\n");
return -1;
}
debug("mmc0 device found at %p, seq %d\n", dev, dev->seq);
mode = "mmc";
bootseq = dev->seq;
break;
case SD_MODE:
puts("SD_MODE\n");
if (uclass_get_device_by_name(UCLASS_MMC,
"mmc@ff160000", &dev) &&
uclass_get_device_by_name(UCLASS_MMC,
"sdhci@ff160000", &dev)) {
puts("Boot from SD0 but without SD0 enabled!\n");
return -1;
}
debug("mmc0 device found at %p, seq %d\n", dev, dev->seq);
mode = "mmc";
bootseq = dev->seq;
env_set("modeboot", "sdboot");
break;
case SD1_LSHFT_MODE:
puts("LVL_SHFT_");
/* fall through */
case SD_MODE1:
puts("SD_MODE1\n");
if (uclass_get_device_by_name(UCLASS_MMC,
"mmc@ff170000", &dev) &&
uclass_get_device_by_name(UCLASS_MMC,
"sdhci@ff170000", &dev)) {
puts("Boot from SD1 but without SD1 enabled!\n");
return -1;
}
debug("mmc1 device found at %p, seq %d\n", dev, dev->seq);
mode = "mmc";
bootseq = dev->seq;
env_set("modeboot", "sdboot");
break;
case NAND_MODE:
puts("NAND_MODE\n");
mode = "nand0";
env_set("modeboot", "nandboot");
break;
default:
mode = "";
printf("Invalid Boot Mode:0x%x\n", bootmode);
break;
}
if (bootseq >= 0) {
bootseq_len = snprintf(NULL, 0, "%i", bootseq);
debug("Bootseq len: %x\n", bootseq_len);
}
/*
* One terminating char + one byte for space between mode
* and default boot_targets
*/
env_targets = env_get("boot_targets");
if (env_targets)
env_targets_len = strlen(env_targets);
new_targets = calloc(1, strlen(mode) + env_targets_len + 2 +
bootseq_len);
if (!new_targets)
return -ENOMEM;
if (bootseq >= 0)
sprintf(new_targets, "%s%x %s", mode, bootseq,
env_targets ? env_targets : "");
else
sprintf(new_targets, "%s %s", mode,
env_targets ? env_targets : "");
env_set("boot_targets", new_targets);
reset_reason();
return board_late_init_xilinx();
}
#endif
int checkboard(void)
{
puts("Board: Xilinx ZynqMP\n");
return 0;
}