mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 08:58:52 +09:00
![Simon Glass](/assets/img/avatar_default.png)
These functions belong in cpu_func.h. Another option would be cache.h but that code uses driver model and we have not moved these cache functions to use driver model. Since they are CPU-related it seems reasonable to put them here. Move them over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
340 lines
9.0 KiB
C
340 lines
9.0 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* EMIF: DDR3 test commands
|
|
*
|
|
* Copyright (C) 2012-2017 Texas Instruments Incorporated, <www.ti.com>
|
|
*/
|
|
|
|
#include <cpu_func.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/emif.h>
|
|
#include <common.h>
|
|
#include <command.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifdef CONFIG_ARCH_KEYSTONE
|
|
#include <asm/arch/ddr3.h>
|
|
#define DDR_MIN_ADDR CONFIG_SYS_SDRAM_BASE
|
|
#define STACKSIZE (512 << 10) /* 512 KiB */
|
|
|
|
#define DDR_REMAP_ADDR 0x80000000
|
|
#define ECC_START_ADDR1 ((DDR_MIN_ADDR - DDR_REMAP_ADDR) >> 17)
|
|
|
|
#define ECC_END_ADDR1 (((gd->start_addr_sp - DDR_REMAP_ADDR - \
|
|
STACKSIZE) >> 17) - 2)
|
|
#endif
|
|
|
|
#define DDR_TEST_BURST_SIZE 1024
|
|
|
|
static int ddr_memory_test(u32 start_address, u32 end_address, int quick)
|
|
{
|
|
u32 index_start, value, index;
|
|
|
|
index_start = start_address;
|
|
|
|
while (1) {
|
|
/* Write a pattern */
|
|
for (index = index_start;
|
|
index < index_start + DDR_TEST_BURST_SIZE;
|
|
index += 4)
|
|
__raw_writel(index, index);
|
|
|
|
/* Read and check the pattern */
|
|
for (index = index_start;
|
|
index < index_start + DDR_TEST_BURST_SIZE;
|
|
index += 4) {
|
|
value = __raw_readl(index);
|
|
if (value != index) {
|
|
printf("ddr_memory_test: Failed at address index = 0x%x value = 0x%x *(index) = 0x%x\n",
|
|
index, value, __raw_readl(index));
|
|
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
index_start += DDR_TEST_BURST_SIZE;
|
|
if (index_start >= end_address)
|
|
break;
|
|
|
|
if (quick)
|
|
continue;
|
|
|
|
/* Write a pattern for complementary values */
|
|
for (index = index_start;
|
|
index < index_start + DDR_TEST_BURST_SIZE;
|
|
index += 4)
|
|
__raw_writel((u32)~index, index);
|
|
|
|
/* Read and check the pattern */
|
|
for (index = index_start;
|
|
index < index_start + DDR_TEST_BURST_SIZE;
|
|
index += 4) {
|
|
value = __raw_readl(index);
|
|
if (value != ~index) {
|
|
printf("ddr_memory_test: Failed at address index = 0x%x value = 0x%x *(index) = 0x%x\n",
|
|
index, value, __raw_readl(index));
|
|
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
index_start += DDR_TEST_BURST_SIZE;
|
|
if (index_start >= end_address)
|
|
break;
|
|
|
|
/* Write a pattern */
|
|
for (index = index_start;
|
|
index < index_start + DDR_TEST_BURST_SIZE;
|
|
index += 2)
|
|
__raw_writew((u16)index, index);
|
|
|
|
/* Read and check the pattern */
|
|
for (index = index_start;
|
|
index < index_start + DDR_TEST_BURST_SIZE;
|
|
index += 2) {
|
|
value = __raw_readw(index);
|
|
if (value != (u16)index) {
|
|
printf("ddr_memory_test: Failed at address index = 0x%x value = 0x%x *(index) = 0x%x\n",
|
|
index, value, __raw_readw(index));
|
|
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
index_start += DDR_TEST_BURST_SIZE;
|
|
if (index_start >= end_address)
|
|
break;
|
|
|
|
/* Write a pattern */
|
|
for (index = index_start;
|
|
index < index_start + DDR_TEST_BURST_SIZE;
|
|
index += 1)
|
|
__raw_writeb((u8)index, index);
|
|
|
|
/* Read and check the pattern */
|
|
for (index = index_start;
|
|
index < index_start + DDR_TEST_BURST_SIZE;
|
|
index += 1) {
|
|
value = __raw_readb(index);
|
|
if (value != (u8)index) {
|
|
printf("ddr_memory_test: Failed at address index = 0x%x value = 0x%x *(index) = 0x%x\n",
|
|
index, value, __raw_readb(index));
|
|
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
index_start += DDR_TEST_BURST_SIZE;
|
|
if (index_start >= end_address)
|
|
break;
|
|
}
|
|
|
|
puts("ddr memory test PASSED!\n");
|
|
return 0;
|
|
}
|
|
|
|
static int ddr_memory_compare(u32 address1, u32 address2, u32 size)
|
|
{
|
|
u32 index, value, index2, value2;
|
|
|
|
for (index = address1, index2 = address2;
|
|
index < address1 + size;
|
|
index += 4, index2 += 4) {
|
|
value = __raw_readl(index);
|
|
value2 = __raw_readl(index2);
|
|
|
|
if (value != value2) {
|
|
printf("ddr_memory_test: Compare failed at address = 0x%x value = 0x%x, address2 = 0x%x value2 = 0x%x\n",
|
|
index, value, index2, value2);
|
|
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
puts("ddr memory compare PASSED!\n");
|
|
return 0;
|
|
}
|
|
|
|
static void ddr_check_ecc_status(void)
|
|
{
|
|
struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE;
|
|
u32 err_1b = readl(&emif->emif_1b_ecc_err_cnt);
|
|
u32 int_status = readl(&emif->emif_irqstatus_raw_sys);
|
|
int ecc_test = 0;
|
|
char *env;
|
|
|
|
env = env_get("ecc_test");
|
|
if (env)
|
|
ecc_test = simple_strtol(env, NULL, 0);
|
|
|
|
puts("ECC test Status:\n");
|
|
if (int_status & EMIF_INT_WR_ECC_ERR_SYS_MASK)
|
|
puts("\tECC test: DDR ECC write error interrupted\n");
|
|
|
|
if (int_status & EMIF_INT_TWOBIT_ECC_ERR_SYS_MASK)
|
|
if (!ecc_test)
|
|
panic("\tECC test: DDR ECC 2-bit error interrupted");
|
|
|
|
if (int_status & EMIF_INT_ONEBIT_ECC_ERR_SYS_MASK)
|
|
puts("\tECC test: DDR ECC 1-bit error interrupted\n");
|
|
|
|
if (err_1b)
|
|
printf("\tECC test: 1-bit ECC err count: 0x%x\n", err_1b);
|
|
}
|
|
|
|
static int ddr_memory_ecc_err(u32 addr, u32 ecc_err)
|
|
{
|
|
struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE;
|
|
u32 ecc_ctrl = readl(&emif->emif_ecc_ctrl_reg);
|
|
u32 val1, val2, val3;
|
|
|
|
debug("Disabling D-Cache before ECC test\n");
|
|
dcache_disable();
|
|
invalidate_dcache_all();
|
|
|
|
puts("Testing DDR ECC:\n");
|
|
puts("\tECC test: Disabling DDR ECC ...\n");
|
|
writel(0, &emif->emif_ecc_ctrl_reg);
|
|
|
|
val1 = readl(addr);
|
|
val2 = val1 ^ ecc_err;
|
|
writel(val2, addr);
|
|
|
|
val3 = readl(addr);
|
|
#ifdef CONFIG_ARCH_KEYSTONE
|
|
ecc_ctrl = ECC_START_ADDR1 | (ECC_END_ADDR1 << 16);
|
|
writel(ecc_ctrl, EMIF1_BASE + KS2_DDR3_ECC_ADDR_RANGE1_OFFSET);
|
|
ddr3_enable_ecc(EMIF1_BASE, 1);
|
|
#else
|
|
writel(ecc_ctrl, &emif->emif_ecc_ctrl_reg);
|
|
#endif
|
|
|
|
printf("\tECC test: addr 0x%x, read data 0x%x, written data 0x%x, err pattern: 0x%x, read after write data 0x%x\n",
|
|
addr, val1, val2, ecc_err, val3);
|
|
|
|
puts("\tECC test: Enabled DDR ECC ...\n");
|
|
|
|
val1 = readl(addr);
|
|
printf("\tECC test: addr 0x%x, read data 0x%x\n", addr, val1);
|
|
|
|
ddr_check_ecc_status();
|
|
|
|
debug("Enabling D-cache back after ECC test\n");
|
|
enable_caches();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int is_addr_valid(u32 addr)
|
|
{
|
|
struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE;
|
|
u32 start_addr, end_addr, range, ecc_ctrl;
|
|
|
|
#ifdef CONFIG_ARCH_KEYSTONE
|
|
ecc_ctrl = EMIF_ECC_REG_ECC_ADDR_RGN_1_EN_MASK;
|
|
range = ECC_START_ADDR1 | (ECC_END_ADDR1 << 16);
|
|
#else
|
|
ecc_ctrl = readl(&emif->emif_ecc_ctrl_reg);
|
|
range = readl(&emif->emif_ecc_address_range_1);
|
|
#endif
|
|
|
|
/* Check in ecc address range 1 */
|
|
if (ecc_ctrl & EMIF_ECC_REG_ECC_ADDR_RGN_1_EN_MASK) {
|
|
start_addr = ((range & EMIF_ECC_REG_ECC_START_ADDR_MASK) << 16)
|
|
+ CONFIG_SYS_SDRAM_BASE;
|
|
end_addr = (range & EMIF_ECC_REG_ECC_END_ADDR_MASK) + 0xFFFF +
|
|
CONFIG_SYS_SDRAM_BASE;
|
|
if ((addr >= start_addr) && (addr <= end_addr))
|
|
/* addr within ecc address range 1 */
|
|
return 1;
|
|
}
|
|
|
|
/* Check in ecc address range 2 */
|
|
if (ecc_ctrl & EMIF_ECC_REG_ECC_ADDR_RGN_2_EN_MASK) {
|
|
range = readl(&emif->emif_ecc_address_range_2);
|
|
start_addr = ((range & EMIF_ECC_REG_ECC_START_ADDR_MASK) << 16)
|
|
+ CONFIG_SYS_SDRAM_BASE;
|
|
end_addr = (range & EMIF_ECC_REG_ECC_END_ADDR_MASK) + 0xFFFF +
|
|
CONFIG_SYS_SDRAM_BASE;
|
|
if ((addr >= start_addr) && (addr <= end_addr))
|
|
/* addr within ecc address range 2 */
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int is_ecc_enabled(void)
|
|
{
|
|
struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE;
|
|
u32 ecc_ctrl = readl(&emif->emif_ecc_ctrl_reg);
|
|
|
|
return (ecc_ctrl & EMIF_ECC_CTRL_REG_ECC_EN_MASK) &&
|
|
(ecc_ctrl & EMIF_ECC_REG_RMW_EN_MASK);
|
|
}
|
|
|
|
static int do_ddr_test(cmd_tbl_t *cmdtp,
|
|
int flag, int argc, char * const argv[])
|
|
{
|
|
u32 start_addr, end_addr, size, ecc_err;
|
|
|
|
if ((argc == 4) && (strncmp(argv[1], "ecc_err", 8) == 0)) {
|
|
if (!is_ecc_enabled()) {
|
|
puts("ECC not enabled. Please Enable ECC any try again\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
start_addr = simple_strtoul(argv[2], NULL, 16);
|
|
ecc_err = simple_strtoul(argv[3], NULL, 16);
|
|
|
|
if (!is_addr_valid(start_addr)) {
|
|
puts("Invalid address. Please enter ECC supported address!\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
ddr_memory_ecc_err(start_addr, ecc_err);
|
|
return 0;
|
|
}
|
|
|
|
if (!(((argc == 4) && (strncmp(argv[1], "test", 5) == 0)) ||
|
|
((argc == 5) && (strncmp(argv[1], "compare", 8) == 0))))
|
|
return cmd_usage(cmdtp);
|
|
|
|
start_addr = simple_strtoul(argv[2], NULL, 16);
|
|
end_addr = simple_strtoul(argv[3], NULL, 16);
|
|
|
|
if ((start_addr < CONFIG_SYS_SDRAM_BASE) ||
|
|
(start_addr > (CONFIG_SYS_SDRAM_BASE +
|
|
get_effective_memsize() - 1)) ||
|
|
(end_addr < CONFIG_SYS_SDRAM_BASE) ||
|
|
(end_addr > (CONFIG_SYS_SDRAM_BASE +
|
|
get_effective_memsize() - 1)) || (start_addr >= end_addr)) {
|
|
puts("Invalid start or end address!\n");
|
|
return cmd_usage(cmdtp);
|
|
}
|
|
|
|
puts("Please wait ...\n");
|
|
if (argc == 5) {
|
|
size = simple_strtoul(argv[4], NULL, 16);
|
|
ddr_memory_compare(start_addr, end_addr, size);
|
|
} else {
|
|
ddr_memory_test(start_addr, end_addr, 0);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(ddr, 5, 1, do_ddr_test,
|
|
"DDR3 test",
|
|
"test <start_addr in hex> <end_addr in hex> - test DDR from start\n"
|
|
" address to end address\n"
|
|
"ddr compare <start_addr in hex> <end_addr in hex> <size in hex> -\n"
|
|
" compare DDR data of (size) bytes from start address to end\n"
|
|
" address\n"
|
|
"ddr ecc_err <addr in hex> <bit_err in hex> - generate bit errors\n"
|
|
" in DDR data at <addr>, the command will read a 32-bit data\n"
|
|
" from <addr>, and write (data ^ bit_err) back to <addr>\n"
|
|
);
|