mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-15 14:43:49 +09:00
![Stephen Warren](/assets/img/avatar_default.png)
This implements a useful bootcmd for Tegra. The boot order is: * If USB enabled, USB storage * Internal MMC (SD card or eMMC) * If networking is enabled, BOOTP/TFTP When booting from USB or MMC, the boot script is assumed to be in partition 1 (although this may be overridden via the rootpart variable), both ext2 and FAT filesystems are supported, the boot script may exist in either / or /boot, and the boot script may be named boot.scr.uimg or boot.scr. When booting over the network, it is assumed that boot.scr.uimg exists on the TFTP server. There is less flexibility here since those setting up network booting are expected to need less hand-holding. In all cases, it is expected that the initial file loaded is a U-Boot image containing a script that will load the kernel, load any required initrd, load any required DTB, and finally bootm the kernel. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
123 lines
3.4 KiB
C
123 lines
3.4 KiB
C
/*
|
|
* (C) Copyright 2010,2011
|
|
* NVIDIA Corporation <www.nvidia.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include <asm/sizes.h>
|
|
|
|
/* LP0 suspend / resume */
|
|
#define CONFIG_TEGRA2_LP0
|
|
#define CONFIG_AES
|
|
#define CONFIG_TEGRA_PMU
|
|
#define CONFIG_TPS6586X_POWER
|
|
#define CONFIG_TEGRA_CLOCK_SCALING
|
|
|
|
#include "tegra2-common.h"
|
|
|
|
/* Enable fdt support for Seaboard. Flash the image in u-boot-dtb.bin */
|
|
#define CONFIG_DEFAULT_DEVICE_TREE tegra2-seaboard
|
|
#define CONFIG_OF_CONTROL
|
|
#define CONFIG_OF_SEPARATE
|
|
|
|
/* High-level configuration options */
|
|
#define V_PROMPT "Tegra2 (SeaBoard) # "
|
|
#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Seaboard"
|
|
|
|
/* Board-specific serial config */
|
|
#define CONFIG_SERIAL_MULTI
|
|
#define CONFIG_TEGRA2_ENABLE_UARTD
|
|
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
|
|
|
|
/* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */
|
|
#define CONFIG_UART_DISABLE_GPIO GPIO_PI3
|
|
/*
|
|
* On Seaboard, SPIFLASH is muxed with UART4. The next 5 defines are
|
|
* needed to work around that design error.
|
|
*/
|
|
#define CONFIG_SPI_UART_SWITCH
|
|
#define CONFIG_SPI_CORRUPTS_UART NV_PA_APB_UARTD_BASE
|
|
#define CONFIG_SPI_CORRUPTS_UART_NR 3
|
|
#define CONFIG_SPI_CORRUPTS_UART_DLY 2500
|
|
#undef CONFIG_CMDLINE_EDITING /* avoid NUL in input buffer */
|
|
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_SEABOARD
|
|
#define CONFIG_SYS_BOARD_ODMDATA 0x300d8011 /* lp1, 1GB */
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
|
|
/* SPI */
|
|
#define CONFIG_TEGRA2_SPI
|
|
#define CONFIG_SPI_FLASH
|
|
#define CONFIG_SPI_FLASH_WINBOND
|
|
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
|
|
#define CONFIG_CMD_SPI
|
|
#define CONFIG_CMD_SF
|
|
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
|
|
|
|
/* I2C */
|
|
#define CONFIG_TEGRA_I2C
|
|
#define CONFIG_SYS_I2C_INIT_BOARD
|
|
#define CONFIG_I2C_MULTI_BUS
|
|
#define CONFIG_SYS_MAX_I2C_BUS 4
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
#define CONFIG_CMD_I2C
|
|
|
|
/* SD/MMC */
|
|
#define CONFIG_MMC
|
|
#define CONFIG_GENERIC_MMC
|
|
#define CONFIG_TEGRA2_MMC
|
|
#define CONFIG_CMD_MMC
|
|
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_EFI_PARTITION
|
|
#define CONFIG_CMD_EXT2
|
|
#define CONFIG_CMD_FAT
|
|
|
|
/* Environment in SPI */
|
|
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
|
#define CONFIG_ENV_SPI_MAX_HZ 48000000
|
|
#define CONFIG_ENV_SPI_MODE SPI_MODE_0
|
|
|
|
#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
|
|
#define CONFIG_ENV_OFFSET (CONFIG_SPI_FLASH_SIZE - CONFIG_ENV_SECT_SIZE)
|
|
|
|
/* USB Host support */
|
|
#define CONFIG_USB_EHCI
|
|
#define CONFIG_USB_EHCI_TEGRA
|
|
#define CONFIG_USB_STORAGE
|
|
#define CONFIG_CMD_USB
|
|
|
|
/* Enable keyboard */
|
|
#define CONFIG_TEGRA2_KEYBOARD
|
|
#define CONFIG_KEYBOARD
|
|
|
|
#undef TEGRA2_DEVICE_SETTINGS
|
|
#define TEGRA2_DEVICE_SETTINGS "stdin=serial,tegra-kbc\0" \
|
|
"stdout=serial\0" \
|
|
"stderr=serial\0"
|
|
|
|
#include "tegra2-common-post.h"
|
|
|
|
#endif /* __CONFIG_H */
|