mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 01:18:52 +09:00
![wdenk](/assets/img/avatar_default.png)
- remove trailing white space, trailing empty lines, C++ comments, etc. - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c) * Patches by Kenneth Johansson, 25 Jun 2003: - major rework of command structure (work done mostly by Michal Cendrowski and Joakim Kristiansen)
461 lines
12 KiB
C
461 lines
12 KiB
C
/*
|
|
* (C) Copyright 2000
|
|
* Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
|
|
*
|
|
* (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Marius Groeger <mgroeger@sysgo.de>
|
|
*
|
|
* (C) Copyright 2003 Pengutronix e.K.
|
|
* Robert Schwebel <r.schwebel@pengutronix.de>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*
|
|
* Back ported to the 8xx platform (from the 8260 platform) by
|
|
* Murray.Jensen@cmst.csiro.au, 27-Jan-01.
|
|
*/
|
|
|
|
/* FIXME: this file is PXA255 specific! What about other XScales? */
|
|
|
|
#include <common.h>
|
|
|
|
#ifdef CONFIG_HARD_I2C
|
|
|
|
/*
|
|
* - CFG_I2C_SPEED
|
|
* - I2C_PXA_SLAVE_ADDR
|
|
*/
|
|
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/pxa-regs.h>
|
|
#include <i2c.h>
|
|
|
|
/*#define DEBUG_I2C 1 /###* activate local debugging output */
|
|
#define I2C_PXA_SLAVE_ADDR 0x1 /* slave pxa unit address */
|
|
#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
|
|
#define I2C_ISR_INIT 0x7FF
|
|
|
|
#ifdef DEBUG_I2C
|
|
#define PRINTD(x) printf x
|
|
#else
|
|
#define PRINTD(x)
|
|
#endif
|
|
|
|
|
|
/* Shall the current transfer have a start/stop condition? */
|
|
#define I2C_COND_NORMAL 0
|
|
#define I2C_COND_START 1
|
|
#define I2C_COND_STOP 2
|
|
|
|
/* Shall the current transfer be ack/nacked or being waited for it? */
|
|
#define I2C_ACKNAK_WAITACK 1
|
|
#define I2C_ACKNAK_SENDACK 2
|
|
#define I2C_ACKNAK_SENDNAK 4
|
|
|
|
/* Specify who shall transfer the data (master or slave) */
|
|
#define I2C_READ 0
|
|
#define I2C_WRITE 1
|
|
|
|
/* All transfers are described by this data structure */
|
|
struct i2c_msg {
|
|
u8 condition;
|
|
u8 acknack;
|
|
u8 direction;
|
|
u8 data;
|
|
};
|
|
|
|
|
|
/**
|
|
* i2c_pxa_reset: - reset the host controller
|
|
*
|
|
*/
|
|
|
|
static void i2c_reset( void )
|
|
{
|
|
ICR &= ~ICR_IUE; /* disable unit */
|
|
ICR |= ICR_UR; /* reset the unit */
|
|
udelay(100);
|
|
ICR &= ~ICR_IUE; /* disable unit */
|
|
CKEN |= CKEN14_I2C; /* set the global I2C clock on */
|
|
ISAR = I2C_PXA_SLAVE_ADDR; /* set our slave address */
|
|
ICR = I2C_ICR_INIT; /* set control register values */
|
|
ISR = I2C_ISR_INIT; /* set clear interrupt bits */
|
|
ICR |= ICR_IUE; /* enable unit */
|
|
udelay(100);
|
|
}
|
|
|
|
|
|
/**
|
|
* i2c_isr_set_cleared: - wait until certain bits of the I2C status register
|
|
* are set and cleared
|
|
*
|
|
* @return: 0 in case of success, 1 means timeout (no match within 10 ms).
|
|
*/
|
|
|
|
static int i2c_isr_set_cleared( unsigned long set_mask, unsigned long cleared_mask )
|
|
{
|
|
int timeout = 10000;
|
|
|
|
while( ((ISR & set_mask)!=set_mask) || ((ISR & cleared_mask)!=0) ){
|
|
udelay( 10 );
|
|
if( timeout-- < 0 ) return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
|
|
/**
|
|
* i2c_transfer: - Transfer one byte over the i2c bus
|
|
*
|
|
* This function can tranfer a byte over the i2c bus in both directions.
|
|
* It is used by the public API functions.
|
|
*
|
|
* @return: 0: transfer successful
|
|
* -1: message is empty
|
|
* -2: transmit timeout
|
|
* -3: ACK missing
|
|
* -4: receive timeout
|
|
* -5: illegal parameters
|
|
* -6: bus is busy and couldn't be aquired
|
|
*/
|
|
int i2c_transfer(struct i2c_msg *msg)
|
|
{
|
|
int ret;
|
|
|
|
if (!msg)
|
|
goto transfer_error_msg_empty;
|
|
|
|
switch(msg->direction) {
|
|
|
|
case I2C_WRITE:
|
|
|
|
/* check if bus is not busy */
|
|
if (!i2c_isr_set_cleared(0,ISR_IBB))
|
|
goto transfer_error_bus_busy;
|
|
|
|
/* start transmission */
|
|
ICR &= ~ICR_START;
|
|
ICR &= ~ICR_STOP;
|
|
IDBR = msg->data;
|
|
if (msg->condition == I2C_COND_START) ICR |= ICR_START;
|
|
if (msg->condition == I2C_COND_STOP) ICR |= ICR_STOP;
|
|
if (msg->acknack == I2C_ACKNAK_SENDNAK) ICR |= ICR_ACKNAK;
|
|
if (msg->acknack == I2C_ACKNAK_SENDACK) ICR &= ~ICR_ACKNAK;
|
|
ICR &= ~ICR_ALDIE;
|
|
ICR |= ICR_TB;
|
|
|
|
/* transmit register empty? */
|
|
if (!i2c_isr_set_cleared(ISR_ITE,0))
|
|
goto transfer_error_transmit_timeout;
|
|
|
|
/* clear 'transmit empty' state */
|
|
ISR |= ISR_ITE;
|
|
|
|
/* wait for ACK from slave */
|
|
if (msg->acknack == I2C_ACKNAK_WAITACK)
|
|
if (!i2c_isr_set_cleared(0,ISR_ACKNAK))
|
|
goto transfer_error_ack_missing;
|
|
break;
|
|
|
|
case I2C_READ:
|
|
|
|
/* check if bus is not busy */
|
|
if (!i2c_isr_set_cleared(0,ISR_IBB))
|
|
goto transfer_error_bus_busy;
|
|
|
|
/* start receive */
|
|
ICR &= ~ICR_START;
|
|
ICR &= ~ICR_STOP;
|
|
if (msg->condition == I2C_COND_START) ICR |= ICR_START;
|
|
if (msg->condition == I2C_COND_STOP) ICR |= ICR_STOP;
|
|
if (msg->acknack == I2C_ACKNAK_SENDNAK) ICR |= ICR_ACKNAK;
|
|
if (msg->acknack == I2C_ACKNAK_SENDACK) ICR &= ~ICR_ACKNAK;
|
|
ICR &= ~ICR_ALDIE;
|
|
ICR |= ICR_TB;
|
|
|
|
/* receive register full? */
|
|
if (!i2c_isr_set_cleared(ISR_IRF,0))
|
|
goto transfer_error_receive_timeout;
|
|
|
|
msg->data = IDBR;
|
|
|
|
/* clear 'receive empty' state */
|
|
ISR |= ISR_IRF;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
goto transfer_error_illegal_param;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
transfer_error_msg_empty:
|
|
PRINTD(("i2c_transfer: error: 'msg' is empty\n"));
|
|
ret = -1; goto i2c_transfer_finish;
|
|
|
|
transfer_error_transmit_timeout:
|
|
PRINTD(("i2c_transfer: error: transmit timeout\n"));
|
|
ret = -2; goto i2c_transfer_finish;
|
|
|
|
transfer_error_ack_missing:
|
|
PRINTD(("i2c_transfer: error: ACK missing\n"));
|
|
ret = -3; goto i2c_transfer_finish;
|
|
|
|
transfer_error_receive_timeout:
|
|
PRINTD(("i2c_transfer: error: receive timeout\n"));
|
|
ret = -4; goto i2c_transfer_finish;
|
|
|
|
transfer_error_illegal_param:
|
|
PRINTD(("i2c_transfer: error: illegal parameters\n"));
|
|
ret = -5; goto i2c_transfer_finish;
|
|
|
|
transfer_error_bus_busy:
|
|
PRINTD(("i2c_transfer: error: bus is busy\n"));
|
|
ret = -6; goto i2c_transfer_finish;
|
|
|
|
i2c_transfer_finish:
|
|
PRINTD(("i2c_transfer: ISR: 0x%04x\n",ISR));
|
|
i2c_reset();
|
|
return ret;
|
|
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------ */
|
|
/* API Functions */
|
|
/* ------------------------------------------------------------------------ */
|
|
|
|
void i2c_init(int speed, int slaveaddr)
|
|
{
|
|
#ifdef CFG_I2C_INIT_BOARD
|
|
/* call board specific i2c bus reset routine before accessing the */
|
|
/* environment, which might be in a chip on that bus. For details */
|
|
/* about this problem see doc/I2C_Edge_Conditions. */
|
|
i2c_init_board();
|
|
#endif
|
|
}
|
|
|
|
|
|
/**
|
|
* i2c_probe: - Test if a chip answers for a given i2c address
|
|
*
|
|
* @chip: address of the chip which is searched for
|
|
* @return: 0 if a chip was found, -1 otherwhise
|
|
*/
|
|
|
|
int i2c_probe(uchar chip)
|
|
{
|
|
struct i2c_msg msg;
|
|
|
|
i2c_reset();
|
|
|
|
msg.condition = I2C_COND_START;
|
|
msg.acknack = I2C_ACKNAK_WAITACK;
|
|
msg.direction = I2C_WRITE;
|
|
msg.data = (chip << 1) + 1;
|
|
if (i2c_transfer(&msg)) return -1;
|
|
|
|
msg.condition = I2C_COND_STOP;
|
|
msg.acknack = I2C_ACKNAK_SENDNAK;
|
|
msg.direction = I2C_READ;
|
|
msg.data = 0x00;
|
|
if (i2c_transfer(&msg)) return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* i2c_read: - Read multiple bytes from an i2c device
|
|
*
|
|
* The higher level routines take into account that this function is only
|
|
* called with len < page length of the device (see configuration file)
|
|
*
|
|
* @chip: address of the chip which is to be read
|
|
* @addr: i2c data address within the chip
|
|
* @alen: length of the i2c data address (1..2 bytes)
|
|
* @buffer: where to write the data
|
|
* @len: how much byte do we want to read
|
|
* @return: 0 in case of success
|
|
*/
|
|
|
|
int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
|
|
{
|
|
struct i2c_msg msg;
|
|
u8 addr_bytes[3]; /* lowest...highest byte of data address */
|
|
int ret;
|
|
|
|
PRINTD(("i2c_read(chip=0x%02x, addr=0x%02x, alen=0x%02x, len=0x%02x)\n",chip,addr,alen,len));
|
|
|
|
i2c_reset();
|
|
|
|
/* dummy chip address write */
|
|
PRINTD(("i2c_read: dummy chip address write\n"));
|
|
msg.condition = I2C_COND_START;
|
|
msg.acknack = I2C_ACKNAK_WAITACK;
|
|
msg.direction = I2C_WRITE;
|
|
msg.data = (chip << 1);
|
|
msg.data &= 0xFE;
|
|
if ((ret=i2c_transfer(&msg))) return -1;
|
|
|
|
/*
|
|
* send memory address bytes;
|
|
* alen defines how much bytes we have to send.
|
|
*/
|
|
/*addr &= ((1 << CFG_EEPROM_PAGE_WRITE_BITS)-1); */
|
|
addr_bytes[0] = (u8)((addr >> 0) & 0x000000FF);
|
|
addr_bytes[1] = (u8)((addr >> 8) & 0x000000FF);
|
|
addr_bytes[2] = (u8)((addr >> 16) & 0x000000FF);
|
|
|
|
while (--alen >= 0) {
|
|
|
|
PRINTD(("i2c_read: send memory word address byte %1d\n",alen));
|
|
msg.condition = I2C_COND_NORMAL;
|
|
msg.acknack = I2C_ACKNAK_WAITACK;
|
|
msg.direction = I2C_WRITE;
|
|
msg.data = addr_bytes[alen];
|
|
if ((ret=i2c_transfer(&msg))) return -1;
|
|
}
|
|
|
|
|
|
/* start read sequence */
|
|
PRINTD(("i2c_read: start read sequence\n"));
|
|
msg.condition = I2C_COND_START;
|
|
msg.acknack = I2C_ACKNAK_WAITACK;
|
|
msg.direction = I2C_WRITE;
|
|
msg.data = (chip << 1);
|
|
msg.data |= 0x01;
|
|
if ((ret=i2c_transfer(&msg))) return -1;
|
|
|
|
/* read bytes; send NACK at last byte */
|
|
while (len--) {
|
|
|
|
if (len==0) {
|
|
msg.condition = I2C_COND_STOP;
|
|
msg.acknack = I2C_ACKNAK_SENDNAK;
|
|
} else {
|
|
msg.condition = I2C_COND_NORMAL;
|
|
msg.acknack = I2C_ACKNAK_SENDACK;
|
|
}
|
|
|
|
msg.direction = I2C_READ;
|
|
msg.data = 0x00;
|
|
if ((ret=i2c_transfer(&msg))) return -1;
|
|
|
|
*(buffer++) = msg.data;
|
|
|
|
PRINTD(("i2c_read: reading byte (0x%08x)=0x%02x\n",(unsigned int)buffer,*buffer));
|
|
|
|
}
|
|
|
|
i2c_reset();
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* i2c_write: - Write multiple bytes to an i2c device
|
|
*
|
|
* The higher level routines take into account that this function is only
|
|
* called with len < page length of the device (see configuration file)
|
|
*
|
|
* @chip: address of the chip which is to be written
|
|
* @addr: i2c data address within the chip
|
|
* @alen: length of the i2c data address (1..2 bytes)
|
|
* @buffer: where to find the data to be written
|
|
* @len: how much byte do we want to read
|
|
* @return: 0 in case of success
|
|
*/
|
|
|
|
int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
|
|
{
|
|
struct i2c_msg msg;
|
|
u8 addr_bytes[3]; /* lowest...highest byte of data address */
|
|
|
|
PRINTD(("i2c_write(chip=0x%02x, addr=0x%02x, alen=0x%02x, len=0x%02x)\n",chip,addr,alen,len));
|
|
|
|
i2c_reset();
|
|
|
|
/* chip address write */
|
|
PRINTD(("i2c_write: chip address write\n"));
|
|
msg.condition = I2C_COND_START;
|
|
msg.acknack = I2C_ACKNAK_WAITACK;
|
|
msg.direction = I2C_WRITE;
|
|
msg.data = (chip << 1);
|
|
msg.data &= 0xFE;
|
|
if (i2c_transfer(&msg)) return -1;
|
|
|
|
/*
|
|
* send memory address bytes;
|
|
* alen defines how much bytes we have to send.
|
|
*/
|
|
addr_bytes[0] = (u8)((addr >> 0) & 0x000000FF);
|
|
addr_bytes[1] = (u8)((addr >> 8) & 0x000000FF);
|
|
addr_bytes[2] = (u8)((addr >> 16) & 0x000000FF);
|
|
|
|
while (--alen >= 0) {
|
|
|
|
PRINTD(("i2c_write: send memory word address\n"));
|
|
msg.condition = I2C_COND_NORMAL;
|
|
msg.acknack = I2C_ACKNAK_WAITACK;
|
|
msg.direction = I2C_WRITE;
|
|
msg.data = addr_bytes[alen];
|
|
if (i2c_transfer(&msg)) return -1;
|
|
}
|
|
|
|
/* write bytes; send NACK at last byte */
|
|
while (len--) {
|
|
|
|
PRINTD(("i2c_write: writing byte (0x%08x)=0x%02x\n",(unsigned int)buffer,*buffer));
|
|
|
|
if (len==0)
|
|
msg.condition = I2C_COND_STOP;
|
|
else
|
|
msg.condition = I2C_COND_NORMAL;
|
|
|
|
msg.acknack = I2C_ACKNAK_WAITACK;
|
|
msg.direction = I2C_WRITE;
|
|
msg.data = *(buffer++);
|
|
|
|
if (i2c_transfer(&msg)) return -1;
|
|
|
|
}
|
|
|
|
i2c_reset();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
uchar i2c_reg_read (uchar chip, uchar reg)
|
|
{
|
|
PRINTD(("i2c_reg_read(chip=0x%02x, reg=0x%02x)\n",chip,reg));
|
|
return 0;
|
|
}
|
|
|
|
void i2c_reg_write(uchar chip, uchar reg, uchar val)
|
|
{
|
|
PRINTD(("i2c_reg_write(chip=0x%02x, reg=0x%02x, val=0x%02x)\n",chip,reg,val));
|
|
}
|
|
|
|
#endif /* CONFIG_HARD_I2C */
|