Vitaly Andrianov d9a76e77c8 ARM: keystone2: use SPD info to configure K2HK and K2E DDR3 ... This commit replaces hard-coded EMIF and PHY DDR3 configurations for predefined SODIMMs to a calculated configuration. The SODIMM parameters are read from SODIMM's SPD and used to calculated the configuration. The current commit supports calculation for DDR3 with 1600MHz and 1333MHz only. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>		2016-03-14 19:18:44 -04:00
..
include/mach	ARM: keystone2: use SPD info to configure K2HK and K2E DDR3	2016-03-14 19:18:44 -04:00
clock.c	ARM: keystone2: K2G: Add support for different arm/device speeds	2016-03-14 19:18:44 -04:00
cmd_clock.c	ARM: keystone2: Use common definition for clk_get_rate	2015-08-12 20:47:55 -04:00
cmd_ddr3.c	ARM: keystone: move SoC sources to mach-keystone	2015-02-21 08:23:52 -05:00
cmd_mon.c	ARM: k2g: Add clock information	2015-10-22 14:22:16 -04:00
config.mk	ARM: keystone2: Use dtb images by default	2015-10-22 14:22:11 -04:00
ddr3_spd.c	ARM: keystone2: use SPD info to configure K2HK and K2E DDR3	2016-03-14 19:18:44 -04:00
ddr3.c	ARM: k2g: Add ddr3 info	2015-10-22 14:22:18 -04:00
init.c	ARM: k2g: Correct base addresses	2015-10-22 14:22:20 -04:00
Kconfig	ARM: k2g: Add kconfig support	2015-10-22 14:22:13 -04:00
keystone.c	ARM: keystone2: Use macro for DSP GEM power domain	2016-03-14 19:18:42 -04:00
Makefile	ARM: keystone2: use SPD info to configure K2HK and K2E DDR3	2016-03-14 19:18:44 -04:00
msmc.c	ARM: keystone: move SoC sources to mach-keystone	2015-02-21 08:23:52 -05:00
psc.c	ARM: keystone2: psc: introduce function to hold and release module in reset.	2016-03-14 19:18:36 -04:00