mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-11 23:33:26 +09:00
![Igor Grinberg](/assets/img/avatar_default.png)
Innovator and H2 boards used machine_is_* macros for setting the machine type. These macros are expanded in compile time and thus leaves unreachable code (though gcc might optimize it). Switch them to use common code for machine type setting. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
310 lines
9.1 KiB
C
310 lines
9.1 KiB
C
/*
|
|
* (C) Copyright 2002
|
|
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Marius Groeger <mgroeger@sysgo.de>
|
|
*
|
|
* (C) Copyright 2002
|
|
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
|
|
*
|
|
* (C) Copyright 2003
|
|
* Texas Instruments, <www.ti.com>
|
|
* Kshitij Gupta <Kshitij@ti.com>
|
|
*
|
|
* Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <netdev.h>
|
|
#if defined(CONFIG_OMAP1610)
|
|
#include <./configs/omap1510.h>
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifdef CONFIG_CS_AUTOBOOT
|
|
unsigned long omap_flash_base;
|
|
#endif
|
|
|
|
void flash__init (void);
|
|
void ether__init (void);
|
|
void set_muxconf_regs (void);
|
|
void peripheral_power_enable (void);
|
|
|
|
#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
|
|
|
|
static inline void delay (unsigned long loops)
|
|
{
|
|
__asm__ volatile ("1:\n"
|
|
"subs %0, %1, #1\n"
|
|
"bne 1b":"=r" (loops):"0" (loops));
|
|
}
|
|
|
|
/*
|
|
* Miscellaneous platform dependent initialisations
|
|
*/
|
|
|
|
int board_init (void)
|
|
{
|
|
/* adress of boot parameters */
|
|
gd->bd->bi_boot_params = 0x10000100;
|
|
|
|
/* Configure MUX settings */
|
|
set_muxconf_regs ();
|
|
peripheral_power_enable ();
|
|
|
|
/* this speeds up your boot a quite a bit. However to make it
|
|
* work, you need make sure your kernel startup flush bug is fixed.
|
|
* ... rkw ...
|
|
*/
|
|
icache_enable ();
|
|
|
|
flash__init ();
|
|
ether__init ();
|
|
return 0;
|
|
}
|
|
|
|
|
|
int misc_init_r (void)
|
|
{
|
|
/* currently empty */
|
|
return (0);
|
|
}
|
|
|
|
/******************************
|
|
Routine:
|
|
Description:
|
|
******************************/
|
|
void flash__init (void)
|
|
{
|
|
#define EMIFS_GlB_Config_REG 0xfffecc0c
|
|
unsigned int regval;
|
|
|
|
#ifdef CONFIG_CS_AUTOBOOT
|
|
/* Check swapping of CS0 and CS3, set flash base accordingly */
|
|
omap_flash_base = ((*((u32 *)OMAP_EMIFS_CONFIG_REG) & 0x02) == 0) ?
|
|
PHYS_FLASH_1_BM0 : PHYS_FLASH_1_BM1;
|
|
#endif
|
|
regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG);
|
|
/* Turn off write protection for flash devices. */
|
|
regval = regval | 0x0001;
|
|
*((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval;
|
|
}
|
|
/*************************************************************
|
|
Routine:ether__init
|
|
Description: take the Ethernet controller out of reset and wait
|
|
for the EEPROM load to complete.
|
|
*************************************************************/
|
|
void ether__init (void)
|
|
{
|
|
#define ETH_CONTROL_REG 0x0400030b
|
|
|
|
#ifdef CONFIG_H2_OMAP1610
|
|
#define LAN_RESET_REGISTER 0x0400001c
|
|
|
|
/* The debug board on which the lan chip resides may not be powered
|
|
* ON at the same time as the OMAP chip. So wait in a loop until the
|
|
* lan reset register (on the debug board) is available (powered on)
|
|
* and reset the lan chip.
|
|
*/
|
|
|
|
*((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0000;
|
|
do {
|
|
*((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0001;
|
|
udelay (3);
|
|
} while (*((volatile unsigned short *) LAN_RESET_REGISTER) != 0x0001);
|
|
|
|
do {
|
|
*((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0000;
|
|
udelay (3);
|
|
} while (*((volatile unsigned short *) LAN_RESET_REGISTER) != 0x0000);
|
|
#endif
|
|
|
|
*((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
|
|
udelay (3);
|
|
}
|
|
|
|
/******************************
|
|
Routine:
|
|
Description:
|
|
******************************/
|
|
int dram_init (void)
|
|
{
|
|
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
|
|
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/******************************************************
|
|
Routine: set_muxconf_regs
|
|
Description: Setting up the configuration Mux registers
|
|
specific to the hardware
|
|
*******************************************************/
|
|
void set_muxconf_regs (void)
|
|
{
|
|
volatile unsigned int *MuxConfReg;
|
|
/* set each registers to its reset value; */
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_0);
|
|
/* setup for UART1 */
|
|
*MuxConfReg &= ~(0x02000000); /* bit 25 */
|
|
/* setup for UART2 */
|
|
*MuxConfReg &= ~(0x01000000); /* bit 24 */
|
|
/* Disable Uwire CS Hi-Z */
|
|
*MuxConfReg |= 0x08000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_3);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_4);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_5);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_6);
|
|
/*setup mux for UART3 */
|
|
*MuxConfReg |= 0x00000001; /* bit3, 1, 0 (mux0 5,5,26) */
|
|
*MuxConfReg &= ~0x0000003e;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_7);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_8);
|
|
/* Disable Uwire CS Hi-Z */
|
|
*MuxConfReg |= 0x00001200; /*bit 9 for CS0 12 for CS3 */
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_9);
|
|
/* Need to turn on bits 21 and 12 in FUNC_MUX_CTRL_9 so the */
|
|
/* hardware will actually use TX and RTS based on bit 25 in */
|
|
/* FUNC_MUX_CTRL_0. I told you this thing was screwy! */
|
|
*MuxConfReg |= 0x00201000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_A);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_B);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_C);
|
|
/* setup for UART2 */
|
|
/* Need to turn on bits 27 and 24 in FUNC_MUX_CTRL_C so the */
|
|
/* hardware will actually use TX and RTS based on bit 24 in */
|
|
/* FUNC_MUX_CTRL_0. */
|
|
*MuxConfReg |= 0x09000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_0);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_1);
|
|
*MuxConfReg = 0x00000000;
|
|
/* mux setup for SD/MMC driver */
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_2);
|
|
*MuxConfReg &= 0xFFFE0FFF;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_3);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
|
|
/* bit 13 for MMC2 XOR_CLK */
|
|
*MuxConfReg &= ~(0x00002000);
|
|
/* bit 29 for UART 1 */
|
|
*MuxConfReg &= ~(0x00002000);
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_0);
|
|
/* Configure for USB. Turn on VBUS_CTRL and VBUS_MODE. */
|
|
*MuxConfReg |= 0x000C0000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int)USB_TRANSCEIVER_CTRL);
|
|
*MuxConfReg &= ~(0x00000070);
|
|
*MuxConfReg &= ~(0x00000008);
|
|
*MuxConfReg |= 0x00000003;
|
|
*MuxConfReg |= 0x00000180;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
|
|
/* bit 17, software controls VBUS */
|
|
*MuxConfReg &= ~(0x00020000);
|
|
/* Enable USB 48 and 12M clocks */
|
|
*MuxConfReg |= 0x00000200;
|
|
*MuxConfReg &= ~(0x00000180);
|
|
/*2.75V for MMCSDIO1 */
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) VOLTAGE_CTRL_0);
|
|
*MuxConfReg = 0x00001FE7;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_0);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_1);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_2);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_3);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_4);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_4);
|
|
*MuxConfReg = 0x00000000;
|
|
/* Turn on UART2 48 MHZ clock */
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
|
|
*MuxConfReg |= 0x40000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) USB_OTG_CTRL);
|
|
/* setup for USB VBus detection OMAP161x */
|
|
*MuxConfReg |= 0x00040000; /* bit 18 */
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_2);
|
|
/* PullUps for SD/MMC driver */
|
|
*MuxConfReg |= ~(0xFFFE0FFF);
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int)COMP_MODE_CTRL_0);
|
|
*MuxConfReg = COMP_MODE_ENABLE;
|
|
}
|
|
|
|
/******************************************************
|
|
Routine: peripheral_power_enable
|
|
Description: Enable the power for UART1
|
|
*******************************************************/
|
|
void peripheral_power_enable (void)
|
|
{
|
|
#define UART1_48MHZ_ENABLE ((unsigned short)0x0200)
|
|
#define SW_CLOCK_REQUEST ((volatile unsigned short *)0xFFFE0834)
|
|
|
|
*SW_CLOCK_REQUEST |= UART1_48MHZ_ENABLE;
|
|
}
|
|
|
|
#ifdef CONFIG_CMD_NET
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int rc = 0;
|
|
#ifdef CONFIG_LAN91C96
|
|
rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
|
|
#endif
|
|
return rc;
|
|
}
|
|
#endif
|