mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 17:08:52 +09:00
![Stefan Roese](/assets/img/avatar_default.png)
This patch introduces a weak default function for post_hotkey_pressed(), returning 0, for boards without hotkey support. The long-running tests won't be started on those boards. This default function was implemented in many board directories. By implementing this weak default we can remove all those duplicate versions. Boards with hotkey support, can override this weak default function by defining one in their board specific code. Signed-off-by: Stefan Roese <sr@denx.de>
231 lines
7.4 KiB
C
231 lines
7.4 KiB
C
/*
|
|
* (C) Copyright 2006
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
|
|
#include <common.h>
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
#include <spd_sdram.h>
|
|
#include <ppc4xx_enet.h>
|
|
#include <miiphy.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/4xx_pci.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
extern int alpr_fpga_init(void);
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
/*-------------------------------------------------------------------------
|
|
* Initialize EBC CONFIG
|
|
*-------------------------------------------------------------------------*/
|
|
mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK |
|
|
EBC_CFG_PTD_DISABLE | EBC_CFG_RTC_64PERCLK |
|
|
EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS |
|
|
EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT |
|
|
EBC_CFG_PME_DISABLE | EBC_CFG_PR_32);
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup the interrupt controller polarities, triggers, etc.
|
|
*-------------------------------------------------------------------*/
|
|
/*
|
|
* Because of the interrupt handling rework to handle 440GX interrupts
|
|
* with the common code, we needed to change names of the UIC registers.
|
|
* Here the new relationship:
|
|
*
|
|
* U-Boot name 440GX name
|
|
* -----------------------
|
|
* UIC0 UICB0
|
|
* UIC1 UIC0
|
|
* UIC2 UIC1
|
|
* UIC3 UIC2
|
|
*/
|
|
mtdcr (UIC1SR, 0xffffffff); /* clear all */
|
|
mtdcr (UIC1ER, 0x00000000); /* disable all */
|
|
mtdcr (UIC1CR, 0x00000009); /* SMI & UIC1 crit are critical */
|
|
mtdcr (UIC1PR, 0xfffffe03); /* per manual */
|
|
mtdcr (UIC1TR, 0x01c00000); /* per manual */
|
|
mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr (UIC1SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr (UIC2SR, 0xffffffff); /* clear all */
|
|
mtdcr (UIC2ER, 0x00000000); /* disable all */
|
|
mtdcr (UIC2CR, 0x00000000); /* all non-critical */
|
|
mtdcr (UIC2PR, 0xffffe0ff); /* per ref-board manual */
|
|
mtdcr (UIC2TR, 0x00ffc000); /* per ref-board manual */
|
|
mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr (UIC2SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr (UIC3SR, 0xffffffff); /* clear all */
|
|
mtdcr (UIC3ER, 0x00000000); /* disable all */
|
|
mtdcr (UIC3CR, 0x00000000); /* all non-critical */
|
|
mtdcr (UIC3PR, 0xffffffff); /* per ref-board manual */
|
|
mtdcr (UIC3TR, 0x00ff8c0f); /* per ref-board manual */
|
|
mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr (UIC3SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr (UIC0SR, 0xfc000000); /* clear all */
|
|
mtdcr (UIC0ER, 0x00000000); /* disable all */
|
|
mtdcr (UIC0CR, 0x00000000); /* all non-critical */
|
|
mtdcr (UIC0PR, 0xfc000000); /* */
|
|
mtdcr (UIC0TR, 0x00000000); /* */
|
|
mtdcr (UIC0VR, 0x00000001); /* */
|
|
|
|
/* Setup shutdown/SSD empty interrupt as inputs */
|
|
out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CONFIG_SYS_GPIO_SHUTDOWN | CONFIG_SYS_GPIO_SSD_EMPTY));
|
|
out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CONFIG_SYS_GPIO_SHUTDOWN | CONFIG_SYS_GPIO_SSD_EMPTY));
|
|
|
|
/* Setup GPIO/IRQ multiplexing */
|
|
mtsdr(SDR0_PFC0, 0x01a33e00);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int last_stage_init(void)
|
|
{
|
|
unsigned short reg;
|
|
|
|
/*
|
|
* Configure LED's of both Marvell 88E1111 PHY's
|
|
*
|
|
* This has to be done after the 4xx ethernet driver is loaded,
|
|
* so "last_stage_init()" is the right place.
|
|
*/
|
|
miiphy_read("ppc_4xx_eth2", CONFIG_PHY2_ADDR, 0x18, ®);
|
|
reg |= 0x0001;
|
|
miiphy_write("ppc_4xx_eth2", CONFIG_PHY2_ADDR, 0x18, reg);
|
|
miiphy_read("ppc_4xx_eth3", CONFIG_PHY3_ADDR, 0x18, ®);
|
|
reg |= 0x0001;
|
|
miiphy_write("ppc_4xx_eth3", CONFIG_PHY3_ADDR, 0x18, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int board_rev(void)
|
|
{
|
|
/* Setup as input */
|
|
out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CONFIG_SYS_GPIO_REV0 | CONFIG_SYS_GPIO_REV1));
|
|
out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CONFIG_SYS_GPIO_REV0 | CONFIG_SYS_GPIO_REV1));
|
|
|
|
return (in32(GPIO0_IR) >> 16) & 0x3;
|
|
}
|
|
|
|
int checkboard (void)
|
|
{
|
|
char *s = getenv ("serial#");
|
|
|
|
printf ("Board: ALPR");
|
|
if (s != NULL) {
|
|
puts (", serial# ");
|
|
puts (s);
|
|
}
|
|
printf(" (Rev. %d)\n", board_rev());
|
|
|
|
return (0);
|
|
}
|
|
|
|
#if defined(CONFIG_PCI)
|
|
/*
|
|
* Override weak pci_pre_init()
|
|
*/
|
|
int pci_pre_init(struct pci_controller *hose)
|
|
{
|
|
if (__pci_pre_init(hose) == 0)
|
|
return 0;
|
|
|
|
/* FPGA Init */
|
|
alpr_fpga_init();
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*************************************************************************
|
|
* Override weak is_pci_host()
|
|
*
|
|
* This routine is called to determine if a pci scan should be
|
|
* performed. With various hardware environments (especially cPCI and
|
|
* PPMC) it's insufficient to depend on the state of the arbiter enable
|
|
* bit in the strap register, or generic host/adapter assumptions.
|
|
*
|
|
* Rather than hard-code a bad assumption in the general 440 code, the
|
|
* 440 pci code requires the board to decide at runtime.
|
|
*
|
|
* Return 0 for adapter mode, non-zero for host (monarch) mode.
|
|
*
|
|
*
|
|
************************************************************************/
|
|
static void wait_for_pci_ready(void)
|
|
{
|
|
/*
|
|
* Configure EREADY as input
|
|
*/
|
|
out32(GPIO0_TCR, in32(GPIO0_TCR) & ~CONFIG_SYS_GPIO_EREADY);
|
|
udelay(1000);
|
|
|
|
for (;;) {
|
|
if (in32(GPIO0_IR) & CONFIG_SYS_GPIO_EREADY)
|
|
return;
|
|
}
|
|
|
|
}
|
|
|
|
int is_pci_host(struct pci_controller *hose)
|
|
{
|
|
wait_for_pci_ready();
|
|
return 1; /* return 1 for host controller */
|
|
}
|
|
#endif /* defined(CONFIG_PCI) */
|
|
|
|
/*************************************************************************
|
|
* pci_master_init
|
|
*
|
|
************************************************************************/
|
|
#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT)
|
|
void pci_master_init(struct pci_controller *hose)
|
|
{
|
|
/*--------------------------------------------------------------------------+
|
|
| PowerPC440 PCI Master configuration.
|
|
| Map PLB/processor addresses to PCI memory space.
|
|
| PLB address 0xA0000000-0xCFFFFFFF ==> PCI address 0x80000000-0xCFFFFFFF
|
|
| Use byte reversed out routines to handle endianess.
|
|
| Make this region non-prefetchable.
|
|
+--------------------------------------------------------------------------*/
|
|
out32r( PCIL0_POM0SA, 0 ); /* disable */
|
|
out32r( PCIL0_POM1SA, 0 ); /* disable */
|
|
out32r( PCIL0_POM2SA, 0 ); /* disable */
|
|
|
|
out32r(PCIL0_POM0LAL, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */
|
|
out32r(PCIL0_POM0LAH, 0x00000003); /* PMM0 Local Address */
|
|
out32r(PCIL0_POM0PCIAL, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */
|
|
out32r(PCIL0_POM0PCIAH, 0x00000000); /* PMM0 PCI High Address */
|
|
out32r(PCIL0_POM0SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */
|
|
|
|
out32r(PCIL0_POM1LAL, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */
|
|
out32r(PCIL0_POM1LAH, 0x00000003); /* PMM0 Local Address */
|
|
out32r(PCIL0_POM1PCIAL, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */
|
|
out32r(PCIL0_POM1PCIAH, 0x00000000); /* PMM0 PCI High Address */
|
|
out32r(PCIL0_POM1SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */
|
|
}
|
|
#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */
|