mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-19 00:18:51 +09:00
![wdenk](/assets/img/avatar_default.png)
- Added I2C support for ML300. - Added support for ML300 to read out its environment information stored on the EEPROM. - Added support to use board specific parameters as part of U-Boot's environment information. - Updated MLD files to support configuration for new features above. * Patches by Travis Sawyer, 5 Aug 2004: - Remove incorrect bridge settings for eth group 6 - Add call to setup bridge in ppc_440x_eth_initialize - Fix ppc_440x_eth_init to reset the phy only if its the first time through, otherwise, just check the phy for the autonegotiated speed/duplex. This allows the use of netconsole - only print the speed/duplex the first time the phy is reset.
332 lines
14 KiB
C
332 lines
14 KiB
C
/* $Id: xipif_v1_23_b.c,v 1.1 2002/03/18 23:24:52 linnj Exp $ */
|
|
/******************************************************************************
|
|
*
|
|
* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
|
|
* AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
|
|
* SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
|
|
* OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
|
|
* APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
|
|
* THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
|
|
* AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
|
|
* FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
|
|
* WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
|
|
* IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
|
|
* REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
|
|
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE.
|
|
*
|
|
* (c) Copyright 2002 Xilinx Inc.
|
|
* All rights reserved.
|
|
*
|
|
******************************************************************************/
|
|
/******************************************************************************
|
|
*
|
|
* FILENAME:
|
|
*
|
|
* xipif.c
|
|
*
|
|
* DESCRIPTION:
|
|
*
|
|
* This file contains the implementation of the XIpIf component. The
|
|
* XIpIf component encapsulates the IPIF, which is the standard interface
|
|
* that IP must adhere to when connecting to a bus. The purpose of this
|
|
* component is to encapsulate the IPIF processing such that maintainability
|
|
* is increased. This component does not provide a lot of abstraction from
|
|
* from the details of the IPIF as it is considered a building block for
|
|
* device drivers. A device driver designer must be familiar with the
|
|
* details of the IPIF hardware to use this component.
|
|
*
|
|
* The IPIF hardware provides a building block for all hardware devices such
|
|
* that each device does not need to reimplement these building blocks. The
|
|
* IPIF contains other building blocks, such as FIFOs and DMA channels, which
|
|
* are also common to many devices. These blocks are implemented as separate
|
|
* hardware blocks and instantiated within the IPIF. The primary hardware of
|
|
* the IPIF which is implemented by this software component is the interrupt
|
|
* architecture. Since there are many blocks of a device which may generate
|
|
* interrupts, all the interrupt processing is contained in the common part
|
|
* of the device, the IPIF. This interrupt processing is for the device level
|
|
* only and does not include any processing for the interrupt controller.
|
|
*
|
|
* A device is a mechanism such as an Ethernet MAC. The device is made
|
|
* up of several parts which include an IPIF and the IP. The IPIF contains most
|
|
* of the device infrastructure which is common to all devices, such as
|
|
* interrupt processing, DMA channels, and FIFOs. The infrastructure may also
|
|
* be referred to as IPIF internal blocks since they are part of the IPIF and
|
|
* are separate blocks that can be selected based upon the needs of the device.
|
|
* The IP of the device is the logic that is unique to the device and interfaces
|
|
* to the IPIF of the device.
|
|
*
|
|
* In general, there are two levels of registers within the IPIF. The first
|
|
* level, referred to as the device level, contains registers which are for the
|
|
* entire device. The second level, referred to as the IP level, contains
|
|
* registers which are specific to the IP of the device. The two levels of
|
|
* registers are designed to be hierarchical such that the device level is
|
|
* is a more general register set above the more specific registers of the IP.
|
|
* The IP level of registers provides functionality which is typically common
|
|
* across all devices and allows IP designers to focus on the unique aspects
|
|
* of the IP.
|
|
*
|
|
* The interrupt registers of the IPIF are parameterizable such that the only
|
|
* the number of bits necessary for the device are implemented. The functions
|
|
* of this component do not attempt to validate that the passed in arguments are
|
|
* valid based upon the number of implemented bits. This is necessary to
|
|
* maintain the level of performance required for the common components. Bits
|
|
* of the registers are assigned starting at the least significant bit of the
|
|
* registers.
|
|
*
|
|
* Critical Sections
|
|
*
|
|
* It is the responsibility of the device driver designer to use critical
|
|
* sections as necessary when calling functions of the IPIF. This component
|
|
* does not use critical sections and it does access registers using
|
|
* read-modify-write operations. Calls to IPIF functions from a main thread
|
|
* and from an interrupt context could produce unpredictable behavior such that
|
|
* the caller must provide the appropriate critical sections.
|
|
*
|
|
* Mutual Exclusion
|
|
*
|
|
* The functions of the IPIF are not thread safe such that the caller of all
|
|
* functions is responsible for ensuring mutual exclusion for an IPIF. Mutual
|
|
* exclusion across multiple IPIF components is not necessary.
|
|
*
|
|
* NOTES:
|
|
*
|
|
* None.
|
|
*
|
|
* MODIFICATION HISTORY:
|
|
*
|
|
* Ver Who Date Changes
|
|
* ----- ---- -------- -----------------------------------------------
|
|
* 1.23b jhl 02/27/01 Repartioned to reduce size
|
|
*
|
|
******************************************************************************/
|
|
|
|
/***************************** Include Files *********************************/
|
|
|
|
#include "xipif_v1_23_b.h"
|
|
#include "xio.h"
|
|
|
|
/************************** Constant Definitions *****************************/
|
|
|
|
/* the following constant is used to generate bit masks for register testing
|
|
* in the self test functions, it defines the starting bit mask that is to be
|
|
* shifted from the LSB to MSB in creating a register test mask
|
|
*/
|
|
#define XIIF_V123B_FIRST_BIT_MASK 1UL
|
|
|
|
/**************************** Type Definitions *******************************/
|
|
|
|
/***************** Macros (Inline Functions) Definitions *********************/
|
|
|
|
/************************** Variable Definitions *****************************/
|
|
|
|
/************************** Function Prototypes ******************************/
|
|
|
|
static XStatus IpIntrSelfTest(u32 RegBaseAddress, u32 IpRegistersWidth);
|
|
|
|
/******************************************************************************
|
|
*
|
|
* FUNCTION:
|
|
*
|
|
* XIpIf_SelfTest
|
|
*
|
|
* DESCRIPTION:
|
|
*
|
|
* This function performs a self test on the specified IPIF component. Many
|
|
* of the registers in the IPIF are tested to ensure proper operation. This
|
|
* function is destructive because the IPIF is reset at the start of the test
|
|
* and at the end of the test to ensure predictable results. The IPIF reset
|
|
* also resets the entire device that uses the IPIF. This function exits with
|
|
* all interrupts for the device disabled.
|
|
*
|
|
* ARGUMENTS:
|
|
*
|
|
* InstancePtr points to the XIpIf to operate on.
|
|
*
|
|
* DeviceRegistersWidth contains the number of bits in the device interrupt
|
|
* registers. The hardware is parameterizable such that only the number of bits
|
|
* necessary to support a device are implemented. This value must be between 0
|
|
* and 32 with 0 indicating there are no device interrupt registers used.
|
|
*
|
|
* IpRegistersWidth contains the number of bits in the IP interrupt registers
|
|
* of the device. The hardware is parameterizable such that only the number of
|
|
* bits necessary to support a device are implemented. This value must be
|
|
* between 0 and 32 with 0 indicating there are no IP interrupt registers used.
|
|
*
|
|
* RETURN VALUE:
|
|
*
|
|
* A value of XST_SUCCESS indicates the test was successful with no errors.
|
|
* Any one of the following error values may also be returned.
|
|
*
|
|
* XST_IPIF_RESET_REGISTER_ERROR The value of a register at reset was
|
|
* not valid
|
|
* XST_IPIF_IP_STATUS_ERROR A write to the IP interrupt status
|
|
* register did not read back correctly
|
|
* XST_IPIF_IP_ACK_ERROR One or more bits in the IP interrupt
|
|
* status register did not reset when acked
|
|
* XST_IPIF_IP_ENABLE_ERROR The IP interrupt enable register
|
|
* did not read back correctly based upon
|
|
* what was written to it
|
|
*
|
|
* NOTES:
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
|
|
/* the following constant defines the maximum number of bits which may be
|
|
* used in the registers at the device and IP levels, this is based upon the
|
|
* number of bits available in the registers
|
|
*/
|
|
#define XIIF_V123B_MAX_REG_BIT_COUNT 32
|
|
|
|
XStatus
|
|
XIpIfV123b_SelfTest(u32 RegBaseAddress, u8 IpRegistersWidth)
|
|
{
|
|
XStatus Status;
|
|
|
|
/* assert to verify arguments are valid */
|
|
|
|
XASSERT_NONVOID(IpRegistersWidth <= XIIF_V123B_MAX_REG_BIT_COUNT);
|
|
|
|
/* reset the IPIF such that it's in a known state before the test
|
|
* and interrupts are globally disabled
|
|
*/
|
|
XIIF_V123B_RESET(RegBaseAddress);
|
|
|
|
/* perform the self test on the IP interrupt registers, if
|
|
* it is not successful exit with the status
|
|
*/
|
|
Status = IpIntrSelfTest(RegBaseAddress, IpRegistersWidth);
|
|
if (Status != XST_SUCCESS) {
|
|
return Status;
|
|
}
|
|
|
|
/* reset the IPIF such that it's in a known state before exiting test */
|
|
|
|
XIIF_V123B_RESET(RegBaseAddress);
|
|
|
|
/* reaching this point means there were no errors, return success */
|
|
|
|
return XST_SUCCESS;
|
|
}
|
|
|
|
/******************************************************************************
|
|
*
|
|
* FUNCTION:
|
|
*
|
|
* IpIntrSelfTest
|
|
*
|
|
* DESCRIPTION:
|
|
*
|
|
* Perform a self test on the IP interrupt registers of the IPIF. This
|
|
* function modifies registers of the IPIF such that they are not guaranteed
|
|
* to be in the same state when it returns. Any bits in the IP interrupt
|
|
* status register which are set are assumed to be set by default after a reset
|
|
* and are not tested in the test.
|
|
*
|
|
* ARGUMENTS:
|
|
*
|
|
* InstancePtr points to the XIpIf to operate on.
|
|
*
|
|
* IpRegistersWidth contains the number of bits in the IP interrupt registers
|
|
* of the device. The hardware is parameterizable such that only the number of
|
|
* bits necessary to support a device are implemented. This value must be
|
|
* between 0 and 32 with 0 indicating there are no IP interrupt registers used.
|
|
*
|
|
* RETURN VALUE:
|
|
*
|
|
* A status indicating XST_SUCCESS if the test was successful. Otherwise, one
|
|
* of the following values is returned.
|
|
*
|
|
* XST_IPIF_RESET_REGISTER_ERROR The value of a register at reset was
|
|
* not valid
|
|
* XST_IPIF_IP_STATUS_ERROR A write to the IP interrupt status
|
|
* register did not read back correctly
|
|
* XST_IPIF_IP_ACK_ERROR One or more bits in the IP status
|
|
* register did not reset when acked
|
|
* XST_IPIF_IP_ENABLE_ERROR The IP interrupt enable register
|
|
* did not read back correctly based upon
|
|
* what was written to it
|
|
* NOTES:
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
static XStatus
|
|
IpIntrSelfTest(u32 RegBaseAddress, u32 IpRegistersWidth)
|
|
{
|
|
/* ensure that the IP interrupt interrupt enable register is zero
|
|
* as it should be at reset, the interrupt status is dependent upon the
|
|
* IP such that it's reset value is not known
|
|
*/
|
|
if (XIIF_V123B_READ_IIER(RegBaseAddress) != 0) {
|
|
return XST_IPIF_RESET_REGISTER_ERROR;
|
|
}
|
|
|
|
/* if there are any used IP interrupts, then test all of the interrupt
|
|
* bits in all testable registers
|
|
*/
|
|
if (IpRegistersWidth > 0) {
|
|
u32 BitCount;
|
|
u32 IpInterruptMask = XIIF_V123B_FIRST_BIT_MASK;
|
|
u32 Mask = XIIF_V123B_FIRST_BIT_MASK; /* bits assigned MSB to LSB */
|
|
u32 InterruptStatus;
|
|
|
|
/* generate the register masks to be used for IP register tests, the
|
|
* number of bits supported by the hardware is parameterizable such
|
|
* that only that number of bits are implemented in the registers, the
|
|
* bits are allocated starting at the MSB of the registers
|
|
*/
|
|
for (BitCount = 1; BitCount < IpRegistersWidth; BitCount++) {
|
|
Mask = Mask << 1;
|
|
IpInterruptMask |= Mask;
|
|
}
|
|
|
|
/* get the current IP interrupt status register contents, any bits
|
|
* already set must default to 1 at reset in the device and these
|
|
* bits can't be tested in the following test, remove these bits from
|
|
* the mask that was generated for the test
|
|
*/
|
|
InterruptStatus = XIIF_V123B_READ_IISR(RegBaseAddress);
|
|
IpInterruptMask &= ~InterruptStatus;
|
|
|
|
/* set the bits in the device status register and verify them by reading
|
|
* the register again, all bits of the register are latched
|
|
*/
|
|
XIIF_V123B_WRITE_IISR(RegBaseAddress, IpInterruptMask);
|
|
InterruptStatus = XIIF_V123B_READ_IISR(RegBaseAddress);
|
|
if ((InterruptStatus & IpInterruptMask) != IpInterruptMask)
|
|
{
|
|
return XST_IPIF_IP_STATUS_ERROR;
|
|
}
|
|
|
|
/* test to ensure that the bits set in the IP interrupt status register
|
|
* can be cleared by acknowledging them in the IP interrupt status
|
|
* register then read it again and verify it was cleared
|
|
*/
|
|
XIIF_V123B_WRITE_IISR(RegBaseAddress, IpInterruptMask);
|
|
InterruptStatus = XIIF_V123B_READ_IISR(RegBaseAddress);
|
|
if ((InterruptStatus & IpInterruptMask) != 0) {
|
|
return XST_IPIF_IP_ACK_ERROR;
|
|
}
|
|
|
|
/* set the IP interrupt enable set register and then read the IP
|
|
* interrupt enable register and verify the interrupts were enabled
|
|
*/
|
|
XIIF_V123B_WRITE_IIER(RegBaseAddress, IpInterruptMask);
|
|
if (XIIF_V123B_READ_IIER(RegBaseAddress) != IpInterruptMask) {
|
|
return XST_IPIF_IP_ENABLE_ERROR;
|
|
}
|
|
|
|
/* clear the IP interrupt enable register and then read the
|
|
* IP interrupt enable register and verify the interrupts were disabled
|
|
*/
|
|
XIIF_V123B_WRITE_IIER(RegBaseAddress, 0);
|
|
if (XIIF_V123B_READ_IIER(RegBaseAddress) != 0) {
|
|
return XST_IPIF_IP_ENABLE_ERROR;
|
|
}
|
|
}
|
|
return XST_SUCCESS;
|
|
}
|