mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-29 05:18:51 +09:00
![Nikita Kiryanov](/assets/img/avatar_default.png)
Current implementation only supports 8 bit word lengths, even though omap3 can handle anything between 4 and 32. Update the spi interface to support changing the SPI word length, and implement it in omap3_spi driver to support the full range of possible word lengths. This implementation is backwards compatible by defaulting to the old behavior of 8 bit word lengths. Also, it required a change to the omap3_spi non static I/O functions, but since they are not used anywhere else, no collateral changes are required. Cc: Tom Rini <trini@ti.com> Cc: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
453 lines
12 KiB
C
453 lines
12 KiB
C
/*
|
|
* Copyright (C) 2010 Dirk Behme <dirk.behme@googlemail.com>
|
|
*
|
|
* Driver for McSPI controller on OMAP3. Based on davinci_spi.c
|
|
* Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* Copyright (C) 2007 Atmel Corporation
|
|
*
|
|
* Parts taken from linux/drivers/spi/omap2_mcspi.c
|
|
* Copyright (C) 2005, 2006 Nokia Corporation
|
|
*
|
|
* Modified by Ruslan Araslanov <ruslan.araslanov@vitecmm.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <spi.h>
|
|
#include <malloc.h>
|
|
#include <asm/io.h>
|
|
#include "omap3_spi.h"
|
|
|
|
#define SPI_WAIT_TIMEOUT 3000000
|
|
|
|
static void spi_reset(struct omap3_spi_slave *ds)
|
|
{
|
|
unsigned int tmp;
|
|
|
|
writel(OMAP3_MCSPI_SYSCONFIG_SOFTRESET, &ds->regs->sysconfig);
|
|
do {
|
|
tmp = readl(&ds->regs->sysstatus);
|
|
} while (!(tmp & OMAP3_MCSPI_SYSSTATUS_RESETDONE));
|
|
|
|
writel(OMAP3_MCSPI_SYSCONFIG_AUTOIDLE |
|
|
OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP |
|
|
OMAP3_MCSPI_SYSCONFIG_SMARTIDLE,
|
|
&ds->regs->sysconfig);
|
|
|
|
writel(OMAP3_MCSPI_WAKEUPENABLE_WKEN, &ds->regs->wakeupenable);
|
|
}
|
|
|
|
static void omap3_spi_write_chconf(struct omap3_spi_slave *ds, int val)
|
|
{
|
|
writel(val, &ds->regs->channel[ds->slave.cs].chconf);
|
|
/* Flash post writes to make immediate effect */
|
|
readl(&ds->regs->channel[ds->slave.cs].chconf);
|
|
}
|
|
|
|
static void omap3_spi_set_enable(struct omap3_spi_slave *ds, int enable)
|
|
{
|
|
writel(enable, &ds->regs->channel[ds->slave.cs].chctrl);
|
|
/* Flash post writes to make immediate effect */
|
|
readl(&ds->regs->channel[ds->slave.cs].chctrl);
|
|
}
|
|
|
|
void spi_init()
|
|
{
|
|
/* do nothing */
|
|
}
|
|
|
|
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
|
|
unsigned int max_hz, unsigned int mode)
|
|
{
|
|
struct omap3_spi_slave *ds;
|
|
struct mcspi *regs;
|
|
|
|
/*
|
|
* OMAP3 McSPI (MultiChannel SPI) has 4 busses (modules)
|
|
* with different number of chip selects (CS, channels):
|
|
* McSPI1 has 4 CS (bus 0, cs 0 - 3)
|
|
* McSPI2 has 2 CS (bus 1, cs 0 - 1)
|
|
* McSPI3 has 2 CS (bus 2, cs 0 - 1)
|
|
* McSPI4 has 1 CS (bus 3, cs 0)
|
|
*/
|
|
|
|
switch (bus) {
|
|
case 0:
|
|
regs = (struct mcspi *)OMAP3_MCSPI1_BASE;
|
|
break;
|
|
#ifdef OMAP3_MCSPI2_BASE
|
|
case 1:
|
|
regs = (struct mcspi *)OMAP3_MCSPI2_BASE;
|
|
break;
|
|
#endif
|
|
#ifdef OMAP3_MCSPI3_BASE
|
|
case 2:
|
|
regs = (struct mcspi *)OMAP3_MCSPI3_BASE;
|
|
break;
|
|
#endif
|
|
#ifdef OMAP3_MCSPI4_BASE
|
|
case 3:
|
|
regs = (struct mcspi *)OMAP3_MCSPI4_BASE;
|
|
break;
|
|
#endif
|
|
default:
|
|
printf("SPI error: unsupported bus %i. \
|
|
Supported busses 0 - 3\n", bus);
|
|
return NULL;
|
|
}
|
|
|
|
if (((bus == 0) && (cs > 3)) ||
|
|
((bus == 1) && (cs > 1)) ||
|
|
((bus == 2) && (cs > 1)) ||
|
|
((bus == 3) && (cs > 0))) {
|
|
printf("SPI error: unsupported chip select %i \
|
|
on bus %i\n", cs, bus);
|
|
return NULL;
|
|
}
|
|
|
|
if (max_hz > OMAP3_MCSPI_MAX_FREQ) {
|
|
printf("SPI error: unsupported frequency %i Hz. \
|
|
Max frequency is 48 Mhz\n", max_hz);
|
|
return NULL;
|
|
}
|
|
|
|
if (mode > SPI_MODE_3) {
|
|
printf("SPI error: unsupported SPI mode %i\n", mode);
|
|
return NULL;
|
|
}
|
|
|
|
ds = spi_alloc_slave(struct omap3_spi_slave, bus, cs);
|
|
if (!ds) {
|
|
printf("SPI error: malloc of SPI structure failed\n");
|
|
return NULL;
|
|
}
|
|
|
|
ds->regs = regs;
|
|
ds->freq = max_hz;
|
|
ds->mode = mode;
|
|
|
|
return &ds->slave;
|
|
}
|
|
|
|
void spi_free_slave(struct spi_slave *slave)
|
|
{
|
|
struct omap3_spi_slave *ds = to_omap3_spi(slave);
|
|
|
|
free(ds);
|
|
}
|
|
|
|
int spi_claim_bus(struct spi_slave *slave)
|
|
{
|
|
struct omap3_spi_slave *ds = to_omap3_spi(slave);
|
|
unsigned int conf, div = 0;
|
|
|
|
/* McSPI global module configuration */
|
|
|
|
/*
|
|
* setup when switching from (reset default) slave mode
|
|
* to single-channel master mode
|
|
*/
|
|
spi_reset(ds);
|
|
conf = readl(&ds->regs->modulctrl);
|
|
conf &= ~(OMAP3_MCSPI_MODULCTRL_STEST | OMAP3_MCSPI_MODULCTRL_MS);
|
|
conf |= OMAP3_MCSPI_MODULCTRL_SINGLE;
|
|
writel(conf, &ds->regs->modulctrl);
|
|
|
|
/* McSPI individual channel configuration */
|
|
|
|
/* Calculate clock divisor. Valid range: 0x0 - 0xC ( /1 - /4096 ) */
|
|
if (ds->freq) {
|
|
while (div <= 0xC && (OMAP3_MCSPI_MAX_FREQ / (1 << div))
|
|
> ds->freq)
|
|
div++;
|
|
} else
|
|
div = 0xC;
|
|
|
|
conf = readl(&ds->regs->channel[ds->slave.cs].chconf);
|
|
|
|
/* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS
|
|
* REVISIT: this controller could support SPI_3WIRE mode.
|
|
*/
|
|
#ifdef CONFIG_OMAP3_SPI_D0_D1_SWAPPED
|
|
/*
|
|
* Some boards have D0 wired as MOSI / D1 as MISO instead of
|
|
* The normal D0 as MISO / D1 as MOSI.
|
|
*/
|
|
conf &= ~OMAP3_MCSPI_CHCONF_DPE0;
|
|
conf |= OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1;
|
|
#else
|
|
conf &= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1);
|
|
conf |= OMAP3_MCSPI_CHCONF_DPE0;
|
|
#endif
|
|
|
|
/* wordlength */
|
|
conf &= ~OMAP3_MCSPI_CHCONF_WL_MASK;
|
|
conf |= (ds->slave.wordlen - 1) << 7;
|
|
|
|
/* set chipselect polarity; manage with FORCE */
|
|
if (!(ds->mode & SPI_CS_HIGH))
|
|
conf |= OMAP3_MCSPI_CHCONF_EPOL; /* active-low; normal */
|
|
else
|
|
conf &= ~OMAP3_MCSPI_CHCONF_EPOL;
|
|
|
|
/* set clock divisor */
|
|
conf &= ~OMAP3_MCSPI_CHCONF_CLKD_MASK;
|
|
conf |= div << 2;
|
|
|
|
/* set SPI mode 0..3 */
|
|
if (ds->mode & SPI_CPOL)
|
|
conf |= OMAP3_MCSPI_CHCONF_POL;
|
|
else
|
|
conf &= ~OMAP3_MCSPI_CHCONF_POL;
|
|
if (ds->mode & SPI_CPHA)
|
|
conf |= OMAP3_MCSPI_CHCONF_PHA;
|
|
else
|
|
conf &= ~OMAP3_MCSPI_CHCONF_PHA;
|
|
|
|
/* Transmit & receive mode */
|
|
conf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
|
|
|
|
omap3_spi_write_chconf(ds,conf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void spi_release_bus(struct spi_slave *slave)
|
|
{
|
|
struct omap3_spi_slave *ds = to_omap3_spi(slave);
|
|
|
|
/* Reset the SPI hardware */
|
|
spi_reset(ds);
|
|
}
|
|
|
|
int omap3_spi_write(struct spi_slave *slave, unsigned int len, const void *txp,
|
|
unsigned long flags)
|
|
{
|
|
struct omap3_spi_slave *ds = to_omap3_spi(slave);
|
|
int i;
|
|
int timeout = SPI_WAIT_TIMEOUT;
|
|
int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
|
|
|
|
/* Enable the channel */
|
|
omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN);
|
|
|
|
chconf &= ~(OMAP3_MCSPI_CHCONF_TRM_MASK | OMAP3_MCSPI_CHCONF_WL_MASK);
|
|
chconf |= (ds->slave.wordlen - 1) << 7;
|
|
chconf |= OMAP3_MCSPI_CHCONF_TRM_TX_ONLY;
|
|
chconf |= OMAP3_MCSPI_CHCONF_FORCE;
|
|
omap3_spi_write_chconf(ds,chconf);
|
|
|
|
for (i = 0; i < len; i++) {
|
|
/* wait till TX register is empty (TXS == 1) */
|
|
while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
|
|
OMAP3_MCSPI_CHSTAT_TXS)) {
|
|
if (--timeout <= 0) {
|
|
printf("SPI TXS timed out, status=0x%08x\n",
|
|
readl(&ds->regs->channel[ds->slave.cs].chstat));
|
|
return -1;
|
|
}
|
|
}
|
|
/* Write the data */
|
|
unsigned int *tx = &ds->regs->channel[ds->slave.cs].tx;
|
|
if (ds->slave.wordlen > 16)
|
|
writel(((u32 *)txp)[i], tx);
|
|
else if (ds->slave.wordlen > 8)
|
|
writel(((u16 *)txp)[i], tx);
|
|
else
|
|
writel(((u8 *)txp)[i], tx);
|
|
}
|
|
|
|
/* wait to finish of transfer */
|
|
while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
|
|
OMAP3_MCSPI_CHSTAT_EOT));
|
|
|
|
/* Disable the channel otherwise the next immediate RX will get affected */
|
|
omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS);
|
|
|
|
if (flags & SPI_XFER_END) {
|
|
|
|
chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
|
|
omap3_spi_write_chconf(ds,chconf);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int omap3_spi_read(struct spi_slave *slave, unsigned int len, void *rxp,
|
|
unsigned long flags)
|
|
{
|
|
struct omap3_spi_slave *ds = to_omap3_spi(slave);
|
|
int i;
|
|
int timeout = SPI_WAIT_TIMEOUT;
|
|
int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
|
|
|
|
/* Enable the channel */
|
|
omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN);
|
|
|
|
chconf &= ~(OMAP3_MCSPI_CHCONF_TRM_MASK | OMAP3_MCSPI_CHCONF_WL_MASK);
|
|
chconf |= (ds->slave.wordlen - 1) << 7;
|
|
chconf |= OMAP3_MCSPI_CHCONF_TRM_RX_ONLY;
|
|
chconf |= OMAP3_MCSPI_CHCONF_FORCE;
|
|
omap3_spi_write_chconf(ds,chconf);
|
|
|
|
writel(0, &ds->regs->channel[ds->slave.cs].tx);
|
|
|
|
for (i = 0; i < len; i++) {
|
|
/* Wait till RX register contains data (RXS == 1) */
|
|
while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
|
|
OMAP3_MCSPI_CHSTAT_RXS)) {
|
|
if (--timeout <= 0) {
|
|
printf("SPI RXS timed out, status=0x%08x\n",
|
|
readl(&ds->regs->channel[ds->slave.cs].chstat));
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
/* Disable the channel to prevent furher receiving */
|
|
if(i == (len - 1))
|
|
omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS);
|
|
|
|
/* Read the data */
|
|
unsigned int *rx = &ds->regs->channel[ds->slave.cs].rx;
|
|
if (ds->slave.wordlen > 16)
|
|
((u32 *)rxp)[i] = readl(rx);
|
|
else if (ds->slave.wordlen > 8)
|
|
((u16 *)rxp)[i] = (u16)readl(rx);
|
|
else
|
|
((u8 *)rxp)[i] = (u8)readl(rx);
|
|
}
|
|
|
|
if (flags & SPI_XFER_END) {
|
|
chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
|
|
omap3_spi_write_chconf(ds,chconf);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*McSPI Transmit Receive Mode*/
|
|
int omap3_spi_txrx(struct spi_slave *slave, unsigned int len,
|
|
const void *txp, void *rxp, unsigned long flags)
|
|
{
|
|
struct omap3_spi_slave *ds = to_omap3_spi(slave);
|
|
int timeout = SPI_WAIT_TIMEOUT;
|
|
int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
|
|
int irqstatus = readl(&ds->regs->irqstatus);
|
|
int i=0;
|
|
|
|
/*Enable SPI channel*/
|
|
omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN);
|
|
|
|
/*set TRANSMIT-RECEIVE Mode*/
|
|
chconf &= ~(OMAP3_MCSPI_CHCONF_TRM_MASK | OMAP3_MCSPI_CHCONF_WL_MASK);
|
|
chconf |= (ds->slave.wordlen - 1) << 7;
|
|
chconf |= OMAP3_MCSPI_CHCONF_FORCE;
|
|
omap3_spi_write_chconf(ds,chconf);
|
|
|
|
/*Shift in and out 1 byte at time*/
|
|
for (i=0; i < len; i++){
|
|
/* Write: wait for TX empty (TXS == 1)*/
|
|
irqstatus |= (1<< (4*(ds->slave.bus)));
|
|
while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
|
|
OMAP3_MCSPI_CHSTAT_TXS)) {
|
|
if (--timeout <= 0) {
|
|
printf("SPI TXS timed out, status=0x%08x\n",
|
|
readl(&ds->regs->channel[ds->slave.cs].chstat));
|
|
return -1;
|
|
}
|
|
}
|
|
/* Write the data */
|
|
unsigned int *tx = &ds->regs->channel[ds->slave.cs].tx;
|
|
if (ds->slave.wordlen > 16)
|
|
writel(((u32 *)txp)[i], tx);
|
|
else if (ds->slave.wordlen > 8)
|
|
writel(((u16 *)txp)[i], tx);
|
|
else
|
|
writel(((u8 *)txp)[i], tx);
|
|
|
|
/*Read: wait for RX containing data (RXS == 1)*/
|
|
while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
|
|
OMAP3_MCSPI_CHSTAT_RXS)) {
|
|
if (--timeout <= 0) {
|
|
printf("SPI RXS timed out, status=0x%08x\n",
|
|
readl(&ds->regs->channel[ds->slave.cs].chstat));
|
|
return -1;
|
|
}
|
|
}
|
|
/* Read the data */
|
|
unsigned int *rx = &ds->regs->channel[ds->slave.cs].rx;
|
|
if (ds->slave.wordlen > 16)
|
|
((u32 *)rxp)[i] = readl(rx);
|
|
else if (ds->slave.wordlen > 8)
|
|
((u16 *)rxp)[i] = (u16)readl(rx);
|
|
else
|
|
((u8 *)rxp)[i] = (u8)readl(rx);
|
|
}
|
|
/* Disable the channel */
|
|
omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS);
|
|
|
|
/*if transfer must be terminated disable the channel*/
|
|
if (flags & SPI_XFER_END) {
|
|
chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
|
|
omap3_spi_write_chconf(ds,chconf);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct omap3_spi_slave *ds = to_omap3_spi(slave);
|
|
unsigned int len;
|
|
int ret = -1;
|
|
|
|
if (ds->slave.wordlen < 4 || ds->slave.wordlen > 32) {
|
|
printf("omap3_spi: invalid wordlen %d\n", ds->slave.wordlen);
|
|
return -1;
|
|
}
|
|
|
|
if (bitlen % ds->slave.wordlen)
|
|
return -1;
|
|
|
|
len = bitlen / ds->slave.wordlen;
|
|
|
|
if (bitlen == 0) { /* only change CS */
|
|
int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
|
|
|
|
if (flags & SPI_XFER_BEGIN) {
|
|
omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN);
|
|
chconf |= OMAP3_MCSPI_CHCONF_FORCE;
|
|
omap3_spi_write_chconf(ds,chconf);
|
|
}
|
|
if (flags & SPI_XFER_END) {
|
|
chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
|
|
omap3_spi_write_chconf(ds,chconf);
|
|
omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS);
|
|
}
|
|
ret = 0;
|
|
} else {
|
|
if (dout != NULL && din != NULL)
|
|
ret = omap3_spi_txrx(slave, len, dout, din, flags);
|
|
else if (dout != NULL)
|
|
ret = omap3_spi_write(slave, len, dout, flags);
|
|
else if (din != NULL)
|
|
ret = omap3_spi_read(slave, len, din, flags);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
void spi_cs_activate(struct spi_slave *slave)
|
|
{
|
|
}
|
|
|
|
void spi_cs_deactivate(struct spi_slave *slave)
|
|
{
|
|
}
|