mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-09 19:53:53 +09:00
095aea293b
Calculate EMIF register values based on AC timing parameters from the SDRAM datasheet and the DDR frequency rather than using the hard-coded values. For a new board the user doen't have to go through the tedious process of calculating the register values. Instead, just provide the AC timings from the device data sheet as input and the driver will automatically calculate the register values. Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
283 lines
7.4 KiB
C
283 lines
7.4 KiB
C
/*
|
|
* Timing and Organization details of the Elpida parts used in OMAP4
|
|
* SDPs and Panda
|
|
*
|
|
* (C) Copyright 2010
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* Aneesh V <aneesh@ti.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <asm/arch/emif.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
/*
|
|
* This file provides details of the LPDDR2 SDRAM parts used on OMAP4430
|
|
* SDP and Panda. Since the parts used and geometry are identical for
|
|
* SDP and Panda for a given OMAP4 revision, this information is kept
|
|
* here instead of being in board directory. However the key functions
|
|
* exported are weakly linked so that they can be over-ridden in the board
|
|
* directory if there is a OMAP4 board in the future that uses a different
|
|
* memory device or geometry.
|
|
*
|
|
* For any new board with different memory devices over-ride one or more
|
|
* of the following functions as per the CONFIG flags you intend to enable:
|
|
* - emif_get_reg_dump()
|
|
* - emif_get_dmm_regs()
|
|
* - emif_get_device_details()
|
|
* - emif_get_device_timings()
|
|
*/
|
|
|
|
#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
|
|
|
|
static const struct emif_regs emif_regs_elpida_200_mhz_2cs = {
|
|
.sdram_config_init = 0x80000eb9,
|
|
.sdram_config = 0x80001ab9,
|
|
.ref_ctrl = 0x0000030c,
|
|
.sdram_tim1 = 0x08648311,
|
|
.sdram_tim2 = 0x101b06ca,
|
|
.sdram_tim3 = 0x0048a19f,
|
|
.read_idle_ctrl = 0x000501ff,
|
|
.zq_config = 0x500b3214,
|
|
.temp_alert_config = 0xd8016893,
|
|
.emif_ddr_phy_ctlr_1_init = 0x049ffff5,
|
|
.emif_ddr_phy_ctlr_1 = 0x049ff808
|
|
};
|
|
|
|
static const struct emif_regs emif_regs_elpida_380_mhz_1cs = {
|
|
.sdram_config_init = 0x80000eb1,
|
|
.sdram_config = 0x80001ab1,
|
|
.ref_ctrl = 0x000005cd,
|
|
.sdram_tim1 = 0x10cb0622,
|
|
.sdram_tim2 = 0x20350d52,
|
|
.sdram_tim3 = 0x00b1431f,
|
|
.read_idle_ctrl = 0x000501ff,
|
|
.zq_config = 0x500b3214,
|
|
.temp_alert_config = 0x58016893,
|
|
.emif_ddr_phy_ctlr_1_init = 0x049ffff5,
|
|
.emif_ddr_phy_ctlr_1 = 0x049ff418
|
|
};
|
|
|
|
const struct emif_regs emif_regs_elpida_400_mhz_2cs = {
|
|
.sdram_config_init = 0x80000eb9,
|
|
.sdram_config = 0x80001ab9,
|
|
.ref_ctrl = 0x00000618,
|
|
.sdram_tim1 = 0x10eb0662,
|
|
.sdram_tim2 = 0x20370dd2,
|
|
.sdram_tim3 = 0x00b1c33f,
|
|
.read_idle_ctrl = 0x000501ff,
|
|
.zq_config = 0xd00b3214,
|
|
.temp_alert_config = 0xd8016893,
|
|
.emif_ddr_phy_ctlr_1_init = 0x049ffff5,
|
|
.emif_ddr_phy_ctlr_1 = 0x049ff418
|
|
};
|
|
const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2 = {
|
|
.dmm_lisa_map_0 = 0xFF020100,
|
|
.dmm_lisa_map_1 = 0,
|
|
.dmm_lisa_map_2 = 0,
|
|
.dmm_lisa_map_3 = 0x80540300
|
|
};
|
|
|
|
const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2 = {
|
|
.dmm_lisa_map_0 = 0xFF020100,
|
|
.dmm_lisa_map_1 = 0,
|
|
.dmm_lisa_map_2 = 0,
|
|
.dmm_lisa_map_3 = 0x80640300
|
|
};
|
|
|
|
static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
|
|
{
|
|
u32 omap4_rev = omap_revision();
|
|
|
|
/* Same devices and geometry on both EMIFs */
|
|
if (omap4_rev == OMAP4430_ES1_0)
|
|
*regs = &emif_regs_elpida_380_mhz_1cs;
|
|
else if (omap4_rev == OMAP4430_ES2_0)
|
|
*regs = &emif_regs_elpida_200_mhz_2cs;
|
|
else
|
|
*regs = &emif_regs_elpida_400_mhz_2cs;
|
|
}
|
|
void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
|
|
__attribute__((weak, alias("emif_get_reg_dump_sdp")));
|
|
|
|
static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs
|
|
**dmm_lisa_regs)
|
|
{
|
|
u32 omap_rev = omap_revision();
|
|
|
|
if (omap_rev == OMAP4430_ES1_0)
|
|
*dmm_lisa_regs = &lisa_map_2G_x_1_x_2;
|
|
else
|
|
*dmm_lisa_regs = &lisa_map_2G_x_2_x_2;
|
|
}
|
|
|
|
void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
|
|
__attribute__((weak, alias("emif_get_dmm_regs_sdp")));
|
|
|
|
#else
|
|
|
|
static const struct lpddr2_device_details elpida_2G_S4_details = {
|
|
.type = LPDDR2_TYPE_S4,
|
|
.density = LPDDR2_DENSITY_2Gb,
|
|
.io_width = LPDDR2_IO_WIDTH_32,
|
|
.manufacturer = LPDDR2_MANUFACTURER_ELPIDA
|
|
};
|
|
|
|
static void emif_get_device_details_sdp(u32 emif_nr,
|
|
struct lpddr2_device_details *cs0_device_details,
|
|
struct lpddr2_device_details *cs1_device_details)
|
|
{
|
|
u32 omap_rev = omap_revision();
|
|
|
|
/* EMIF1 & EMIF2 have identical configuration */
|
|
*cs0_device_details = elpida_2G_S4_details;
|
|
|
|
if (omap_rev == OMAP4430_ES1_0)
|
|
cs1_device_details = NULL;
|
|
else
|
|
*cs1_device_details = elpida_2G_S4_details;
|
|
}
|
|
|
|
void emif_get_device_details(u32 emif_nr,
|
|
struct lpddr2_device_details *cs0_device_details,
|
|
struct lpddr2_device_details *cs1_device_details)
|
|
__attribute__((weak, alias("emif_get_device_details_sdp")));
|
|
|
|
#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
|
|
|
|
#ifndef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
|
|
static const struct lpddr2_ac_timings timings_elpida_400_mhz = {
|
|
.max_freq = 400000000,
|
|
.RL = 6,
|
|
.tRPab = 21,
|
|
.tRCD = 18,
|
|
.tWR = 15,
|
|
.tRASmin = 42,
|
|
.tRRD = 10,
|
|
.tWTRx2 = 15,
|
|
.tXSR = 140,
|
|
.tXPx2 = 15,
|
|
.tRFCab = 130,
|
|
.tRTPx2 = 15,
|
|
.tCKE = 3,
|
|
.tCKESR = 15,
|
|
.tZQCS = 90,
|
|
.tZQCL = 360,
|
|
.tZQINIT = 1000,
|
|
.tDQSCKMAXx2 = 11,
|
|
.tRASmax = 70,
|
|
.tFAW = 50
|
|
};
|
|
|
|
static const struct lpddr2_ac_timings timings_elpida_333_mhz = {
|
|
.max_freq = 333000000,
|
|
.RL = 5,
|
|
.tRPab = 21,
|
|
.tRCD = 18,
|
|
.tWR = 15,
|
|
.tRASmin = 42,
|
|
.tRRD = 10,
|
|
.tWTRx2 = 15,
|
|
.tXSR = 140,
|
|
.tXPx2 = 15,
|
|
.tRFCab = 130,
|
|
.tRTPx2 = 15,
|
|
.tCKE = 3,
|
|
.tCKESR = 15,
|
|
.tZQCS = 90,
|
|
.tZQCL = 360,
|
|
.tZQINIT = 1000,
|
|
.tDQSCKMAXx2 = 11,
|
|
.tRASmax = 70,
|
|
.tFAW = 50
|
|
};
|
|
|
|
static const struct lpddr2_ac_timings timings_elpida_200_mhz = {
|
|
.max_freq = 200000000,
|
|
.RL = 3,
|
|
.tRPab = 21,
|
|
.tRCD = 18,
|
|
.tWR = 15,
|
|
.tRASmin = 42,
|
|
.tRRD = 10,
|
|
.tWTRx2 = 20,
|
|
.tXSR = 140,
|
|
.tXPx2 = 15,
|
|
.tRFCab = 130,
|
|
.tRTPx2 = 15,
|
|
.tCKE = 3,
|
|
.tCKESR = 15,
|
|
.tZQCS = 90,
|
|
.tZQCL = 360,
|
|
.tZQINIT = 1000,
|
|
.tDQSCKMAXx2 = 11,
|
|
.tRASmax = 70,
|
|
.tFAW = 50
|
|
};
|
|
|
|
static const struct lpddr2_min_tck min_tck_elpida = {
|
|
.tRL = 3,
|
|
.tRP_AB = 3,
|
|
.tRCD = 3,
|
|
.tWR = 3,
|
|
.tRAS_MIN = 3,
|
|
.tRRD = 2,
|
|
.tWTR = 2,
|
|
.tXP = 2,
|
|
.tRTP = 2,
|
|
.tCKE = 3,
|
|
.tCKESR = 3,
|
|
.tFAW = 8
|
|
};
|
|
|
|
static const struct lpddr2_ac_timings *elpida_ac_timings[MAX_NUM_SPEEDBINS] = {
|
|
&timings_elpida_200_mhz,
|
|
&timings_elpida_333_mhz,
|
|
&timings_elpida_400_mhz
|
|
};
|
|
|
|
static const struct lpddr2_device_timings elpida_2G_S4_timings = {
|
|
.ac_timings = elpida_ac_timings,
|
|
.min_tck = &min_tck_elpida,
|
|
};
|
|
|
|
void emif_get_device_timings_sdp(u32 emif_nr,
|
|
const struct lpddr2_device_timings **cs0_device_timings,
|
|
const struct lpddr2_device_timings **cs1_device_timings)
|
|
{
|
|
u32 omap_rev = omap_revision();
|
|
|
|
/* Identical devices on EMIF1 & EMIF2 */
|
|
*cs0_device_timings = &elpida_2G_S4_timings;
|
|
|
|
if (omap_rev == OMAP4430_ES1_0)
|
|
*cs1_device_timings = NULL;
|
|
else
|
|
*cs1_device_timings = &elpida_2G_S4_timings;
|
|
}
|
|
|
|
void emif_get_device_timings(u32 emif_nr,
|
|
const struct lpddr2_device_timings **cs0_device_timings,
|
|
const struct lpddr2_device_timings **cs1_device_timings)
|
|
__attribute__((weak, alias("emif_get_device_timings_sdp")));
|
|
|
|
#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
|