mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 08:58:52 +09:00
![Maxime Ripard](/assets/img/avatar_default.png)
The current code, if there's both an eMMC and an MMC slot available on the board, will swap the MMC indices based on whether we booted from the eMMC or the MMC. This way, the MMC we're supposed to boot on will always have the index 0. However, this causes various issues, for example when using other components that base their behaviour on the MMC index, such as fastboot. Let's remove that hack, and take the opposite approach. The MMC will always have the same index, but the bootcmd will pick the same device than the one we booted from. This is done through the introduction of the mmc_bootdev environment variable that will be filled by the board code based on the boot device informations we can get from the SoC. In order to not introduce regressions, we also need to adjust the fastboot MMC device and the environment device in order to set it to the eMMC, over the MMC, like it used to be the case. Tested-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
110 lines
3.5 KiB
Plaintext
110 lines
3.5 KiB
Plaintext
comment "FASTBOOT"
|
|
|
|
menuconfig FASTBOOT
|
|
bool "Fastboot support"
|
|
depends on USB_GADGET
|
|
default y if ARCH_SUNXI && USB_MUSB_GADGET
|
|
|
|
if FASTBOOT
|
|
|
|
config USB_FUNCTION_FASTBOOT
|
|
bool "Enable USB fastboot gadget"
|
|
default y
|
|
select USB_GADGET_DOWNLOAD
|
|
imply ANDROID_BOOT_IMAGE
|
|
imply CMD_FASTBOOT
|
|
help
|
|
This enables the USB part of the fastboot gadget.
|
|
|
|
config CMD_FASTBOOT
|
|
bool "Enable FASTBOOT command"
|
|
help
|
|
This enables the command "fastboot" which enables the Android
|
|
fastboot mode for the platform's USB device. Fastboot is a USB
|
|
protocol for downloading images, flashing and device control
|
|
used on Android devices.
|
|
|
|
See doc/README.android-fastboot for more information.
|
|
|
|
if USB_FUNCTION_FASTBOOT
|
|
|
|
config FASTBOOT_BUF_ADDR
|
|
hex "Define FASTBOOT buffer address"
|
|
default 0x82000000 if MX6SX || MX6SL || MX6UL || MX6SLL
|
|
default 0x81000000 if ARCH_OMAP2PLUS
|
|
default 0x42000000 if ARCH_SUNXI && !MACH_SUN9I
|
|
default 0x22000000 if ARCH_SUNXI && MACH_SUN9I
|
|
default 0x60800800 if ROCKCHIP_RK3036 || ROCKCHIP_RK3188 || \
|
|
ROCKCHIP_RK322X
|
|
default 0x800800 if ROCKCHIP_RK3288 || ROCKCHIP_RK3329 || \
|
|
ROCKCHIP_RK3399
|
|
default 0x280000 if ROCKCHIP_RK3368
|
|
default 0x100000 if ARCH_ZYNQMP
|
|
help
|
|
The fastboot protocol requires a large memory buffer for
|
|
downloads. Define this to the starting RAM address to use for
|
|
downloaded images.
|
|
|
|
config FASTBOOT_BUF_SIZE
|
|
hex "Define FASTBOOT buffer size"
|
|
default 0x8000000 if ARCH_ROCKCHIP
|
|
default 0x6000000 if ARCH_ZYNQMP
|
|
default 0x2000000 if ARCH_SUNXI
|
|
default 0x7000000
|
|
help
|
|
The fastboot protocol requires a large memory buffer for
|
|
downloads. This buffer should be as large as possible for a
|
|
platform. Define this to the size available RAM for fastboot.
|
|
|
|
config FASTBOOT_USB_DEV
|
|
int "USB controller number"
|
|
default 0
|
|
help
|
|
Some boards have USB OTG controller other than 0. Define this
|
|
option so it can be used in compiled environment (e.g. in
|
|
CONFIG_BOOTCOMMAND).
|
|
|
|
config FASTBOOT_FLASH
|
|
bool "Enable FASTBOOT FLASH command"
|
|
help
|
|
The fastboot protocol includes a "flash" command for writing
|
|
the downloaded image to a non-volatile storage device. Define
|
|
this to enable the "fastboot flash" command.
|
|
|
|
config FASTBOOT_FLASH_MMC_DEV
|
|
int "Define FASTBOOT MMC FLASH default device"
|
|
depends on FASTBOOT_FLASH && MMC
|
|
default 0 if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA = -1
|
|
default 1 if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA != -1
|
|
help
|
|
The fastboot "flash" command requires additional information
|
|
regarding the non-volatile storage device. Define this to
|
|
the eMMC device that fastboot should use to store the image.
|
|
|
|
config FASTBOOT_GPT_NAME
|
|
string "Target name for updating GPT"
|
|
depends on FASTBOOT_FLASH
|
|
default "gpt"
|
|
help
|
|
The fastboot "flash" command supports writing the downloaded
|
|
image to the Protective MBR and the Primary GUID Partition
|
|
Table. (Additionally, this downloaded image is post-processed
|
|
to generate and write the Backup GUID Partition Table.)
|
|
This occurs when the specified "partition name" on the
|
|
"fastboot flash" command line matches the value defined here.
|
|
The default target name for updating GPT is "gpt".
|
|
|
|
config FASTBOOT_MBR_NAME
|
|
string "Target name for updating MBR"
|
|
depends on FASTBOOT_FLASH
|
|
default "mbr"
|
|
help
|
|
The fastboot "flash" command allows to write the downloaded image
|
|
to the Master Boot Record. This occurs when the "partition name"
|
|
specified on the "fastboot flash" command line matches the value
|
|
defined here. The default target name for updating MBR is "mbr".
|
|
|
|
endif # USB_FUNCTION_FASTBOOT
|
|
|
|
endif # FASTBOOT
|