mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-09 14:23:28 +09:00
![Scott Wood](/assets/img/avatar_default.png)
Get rid of the several "#if 0" sections that were keeping around Linux code that isn't relevant to U-Boot. Besides cluttering the code, these sections make tracking upstream changes harder, rather than easier. It's easy to discard obviously irrelevant diff hunks that patch rejects, but it's not as easy to notice hunks that apply cleanly to the #if 0 section, but *are* relevant to U-Boot and require modification elsewhere. Also remove suspend/resume, as this is not applicable to U-Boot. Removal saves 232 bytes on powerpc. Signed-off-by: Scott Wood <scottwood@freescale.com> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>
609 lines
16 KiB
C
609 lines
16 KiB
C
/*
|
|
* drivers/mtd/nand/nand_util.c
|
|
*
|
|
* Copyright (C) 2006 by Weiss-Electronic GmbH.
|
|
* All rights reserved.
|
|
*
|
|
* @author: Guido Classen <clagix@gmail.com>
|
|
* @descr: NAND Flash support
|
|
* @references: borrowed heavily from Linux mtd-utils code:
|
|
* flash_eraseall.c by Arcom Control System Ltd
|
|
* nandwrite.c by Steven J. Hill (sjhill@realitydiluted.com)
|
|
* and Thomas Gleixner (tglx@linutronix.de)
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License version
|
|
* 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*
|
|
* Copyright 2010 Freescale Semiconductor
|
|
* The portions of this file whose copyright is held by Freescale and which
|
|
* are not considered a derived work of GPL v2-only code may be distributed
|
|
* and/or modified under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <watchdog.h>
|
|
#include <malloc.h>
|
|
#include <div64.h>
|
|
|
|
#include <asm/errno.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <nand.h>
|
|
#include <jffs2/jffs2.h>
|
|
|
|
typedef struct erase_info erase_info_t;
|
|
typedef struct mtd_info mtd_info_t;
|
|
|
|
/* support only for native endian JFFS2 */
|
|
#define cpu_to_je16(x) (x)
|
|
#define cpu_to_je32(x) (x)
|
|
|
|
/*****************************************************************************/
|
|
static int nand_block_bad_scrub(struct mtd_info *mtd, loff_t ofs, int getchip)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* nand_erase_opts: - erase NAND flash with support for various options
|
|
* (jffs2 formating)
|
|
*
|
|
* @param meminfo NAND device to erase
|
|
* @param opts options, @see struct nand_erase_options
|
|
* @return 0 in case of success
|
|
*
|
|
* This code is ported from flash_eraseall.c from Linux mtd utils by
|
|
* Arcom Control System Ltd.
|
|
*/
|
|
int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
|
|
{
|
|
struct jffs2_unknown_node cleanmarker;
|
|
erase_info_t erase;
|
|
unsigned long erase_length, erased_length; /* in blocks */
|
|
int bbtest = 1;
|
|
int result;
|
|
int percent_complete = -1;
|
|
int (*nand_block_bad_old)(struct mtd_info *, loff_t, int) = NULL;
|
|
const char *mtd_device = meminfo->name;
|
|
struct mtd_oob_ops oob_opts;
|
|
struct nand_chip *chip = meminfo->priv;
|
|
|
|
if ((opts->offset & (meminfo->writesize - 1)) != 0) {
|
|
printf("Attempt to erase non page aligned data\n");
|
|
return -1;
|
|
}
|
|
|
|
memset(&erase, 0, sizeof(erase));
|
|
memset(&oob_opts, 0, sizeof(oob_opts));
|
|
|
|
erase.mtd = meminfo;
|
|
erase.len = meminfo->erasesize;
|
|
erase.addr = opts->offset;
|
|
erase_length = lldiv(opts->length + meminfo->erasesize - 1,
|
|
meminfo->erasesize);
|
|
|
|
cleanmarker.magic = cpu_to_je16 (JFFS2_MAGIC_BITMASK);
|
|
cleanmarker.nodetype = cpu_to_je16 (JFFS2_NODETYPE_CLEANMARKER);
|
|
cleanmarker.totlen = cpu_to_je32(8);
|
|
|
|
/* scrub option allows to erase badblock. To prevent internal
|
|
* check from erase() method, set block check method to dummy
|
|
* and disable bad block table while erasing.
|
|
*/
|
|
if (opts->scrub) {
|
|
struct nand_chip *priv_nand = meminfo->priv;
|
|
|
|
nand_block_bad_old = priv_nand->block_bad;
|
|
priv_nand->block_bad = nand_block_bad_scrub;
|
|
/* we don't need the bad block table anymore...
|
|
* after scrub, there are no bad blocks left!
|
|
*/
|
|
if (priv_nand->bbt) {
|
|
kfree(priv_nand->bbt);
|
|
}
|
|
priv_nand->bbt = NULL;
|
|
}
|
|
|
|
for (erased_length = 0;
|
|
erased_length < erase_length;
|
|
erase.addr += meminfo->erasesize) {
|
|
|
|
WATCHDOG_RESET ();
|
|
|
|
if (!opts->scrub && bbtest) {
|
|
int ret = meminfo->block_isbad(meminfo, erase.addr);
|
|
if (ret > 0) {
|
|
if (!opts->quiet)
|
|
printf("\rSkipping bad block at "
|
|
"0x%08llx "
|
|
" \n",
|
|
erase.addr);
|
|
|
|
if (!opts->spread)
|
|
erased_length++;
|
|
|
|
continue;
|
|
|
|
} else if (ret < 0) {
|
|
printf("\n%s: MTD get bad block failed: %d\n",
|
|
mtd_device,
|
|
ret);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
erased_length++;
|
|
|
|
result = meminfo->erase(meminfo, &erase);
|
|
if (result != 0) {
|
|
printf("\n%s: MTD Erase failure: %d\n",
|
|
mtd_device, result);
|
|
continue;
|
|
}
|
|
|
|
/* format for JFFS2 ? */
|
|
if (opts->jffs2 && chip->ecc.layout->oobavail >= 8) {
|
|
chip->ops.ooblen = 8;
|
|
chip->ops.datbuf = NULL;
|
|
chip->ops.oobbuf = (uint8_t *)&cleanmarker;
|
|
chip->ops.ooboffs = 0;
|
|
chip->ops.mode = MTD_OOB_AUTO;
|
|
|
|
result = meminfo->write_oob(meminfo,
|
|
erase.addr,
|
|
&chip->ops);
|
|
if (result != 0) {
|
|
printf("\n%s: MTD writeoob failure: %d\n",
|
|
mtd_device, result);
|
|
continue;
|
|
}
|
|
}
|
|
|
|
if (!opts->quiet) {
|
|
unsigned long long n = erased_length * 100ULL;
|
|
int percent;
|
|
|
|
do_div(n, erase_length);
|
|
percent = (int)n;
|
|
|
|
/* output progress message only at whole percent
|
|
* steps to reduce the number of messages printed
|
|
* on (slow) serial consoles
|
|
*/
|
|
if (percent != percent_complete) {
|
|
percent_complete = percent;
|
|
|
|
printf("\rErasing at 0x%llx -- %3d%% complete.",
|
|
erase.addr, percent);
|
|
|
|
if (opts->jffs2 && result == 0)
|
|
printf(" Cleanmarker written at 0x%llx.",
|
|
erase.addr);
|
|
}
|
|
}
|
|
}
|
|
if (!opts->quiet)
|
|
printf("\n");
|
|
|
|
if (nand_block_bad_old) {
|
|
struct nand_chip *priv_nand = meminfo->priv;
|
|
|
|
priv_nand->block_bad = nand_block_bad_old;
|
|
priv_nand->scan_bbt(meminfo);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
|
|
|
|
/******************************************************************************
|
|
* Support for locking / unlocking operations of some NAND devices
|
|
*****************************************************************************/
|
|
|
|
#define NAND_CMD_LOCK 0x2a
|
|
#define NAND_CMD_LOCK_TIGHT 0x2c
|
|
#define NAND_CMD_UNLOCK1 0x23
|
|
#define NAND_CMD_UNLOCK2 0x24
|
|
#define NAND_CMD_LOCK_STATUS 0x7a
|
|
|
|
/**
|
|
* nand_lock: Set all pages of NAND flash chip to the LOCK or LOCK-TIGHT
|
|
* state
|
|
*
|
|
* @param mtd nand mtd instance
|
|
* @param tight bring device in lock tight mode
|
|
*
|
|
* @return 0 on success, -1 in case of error
|
|
*
|
|
* The lock / lock-tight command only applies to the whole chip. To get some
|
|
* parts of the chip lock and others unlocked use the following sequence:
|
|
*
|
|
* - Lock all pages of the chip using nand_lock(mtd, 0) (or the lockpre pin)
|
|
* - Call nand_unlock() once for each consecutive area to be unlocked
|
|
* - If desired: Bring the chip to the lock-tight state using nand_lock(mtd, 1)
|
|
*
|
|
* If the device is in lock-tight state software can't change the
|
|
* current active lock/unlock state of all pages. nand_lock() / nand_unlock()
|
|
* calls will fail. It is only posible to leave lock-tight state by
|
|
* an hardware signal (low pulse on _WP pin) or by power down.
|
|
*/
|
|
int nand_lock(struct mtd_info *mtd, int tight)
|
|
{
|
|
int ret = 0;
|
|
int status;
|
|
struct nand_chip *chip = mtd->priv;
|
|
|
|
/* select the NAND device */
|
|
chip->select_chip(mtd, 0);
|
|
|
|
chip->cmdfunc(mtd,
|
|
(tight ? NAND_CMD_LOCK_TIGHT : NAND_CMD_LOCK),
|
|
-1, -1);
|
|
|
|
/* call wait ready function */
|
|
status = chip->waitfunc(mtd, chip);
|
|
|
|
/* see if device thinks it succeeded */
|
|
if (status & 0x01) {
|
|
ret = -1;
|
|
}
|
|
|
|
/* de-select the NAND device */
|
|
chip->select_chip(mtd, -1);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* nand_get_lock_status: - query current lock state from one page of NAND
|
|
* flash
|
|
*
|
|
* @param mtd nand mtd instance
|
|
* @param offset page address to query (muss be page aligned!)
|
|
*
|
|
* @return -1 in case of error
|
|
* >0 lock status:
|
|
* bitfield with the following combinations:
|
|
* NAND_LOCK_STATUS_TIGHT: page in tight state
|
|
* NAND_LOCK_STATUS_LOCK: page locked
|
|
* NAND_LOCK_STATUS_UNLOCK: page unlocked
|
|
*
|
|
*/
|
|
int nand_get_lock_status(struct mtd_info *mtd, loff_t offset)
|
|
{
|
|
int ret = 0;
|
|
int chipnr;
|
|
int page;
|
|
struct nand_chip *chip = mtd->priv;
|
|
|
|
/* select the NAND device */
|
|
chipnr = (int)(offset >> chip->chip_shift);
|
|
chip->select_chip(mtd, chipnr);
|
|
|
|
|
|
if ((offset & (mtd->writesize - 1)) != 0) {
|
|
printf ("nand_get_lock_status: "
|
|
"Start address must be beginning of "
|
|
"nand page!\n");
|
|
ret = -1;
|
|
goto out;
|
|
}
|
|
|
|
/* check the Lock Status */
|
|
page = (int)(offset >> chip->page_shift);
|
|
chip->cmdfunc(mtd, NAND_CMD_LOCK_STATUS, -1, page & chip->pagemask);
|
|
|
|
ret = chip->read_byte(mtd) & (NAND_LOCK_STATUS_TIGHT
|
|
| NAND_LOCK_STATUS_LOCK
|
|
| NAND_LOCK_STATUS_UNLOCK);
|
|
|
|
out:
|
|
/* de-select the NAND device */
|
|
chip->select_chip(mtd, -1);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* nand_unlock: - Unlock area of NAND pages
|
|
* only one consecutive area can be unlocked at one time!
|
|
*
|
|
* @param mtd nand mtd instance
|
|
* @param start start byte address
|
|
* @param length number of bytes to unlock (must be a multiple of
|
|
* page size nand->writesize)
|
|
*
|
|
* @return 0 on success, -1 in case of error
|
|
*/
|
|
int nand_unlock(struct mtd_info *mtd, ulong start, ulong length)
|
|
{
|
|
int ret = 0;
|
|
int chipnr;
|
|
int status;
|
|
int page;
|
|
struct nand_chip *chip = mtd->priv;
|
|
printf ("nand_unlock: start: %08x, length: %d!\n",
|
|
(int)start, (int)length);
|
|
|
|
/* select the NAND device */
|
|
chipnr = (int)(start >> chip->chip_shift);
|
|
chip->select_chip(mtd, chipnr);
|
|
|
|
/* check the WP bit */
|
|
chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
|
|
if (!(chip->read_byte(mtd) & NAND_STATUS_WP)) {
|
|
printf ("nand_unlock: Device is write protected!\n");
|
|
ret = -1;
|
|
goto out;
|
|
}
|
|
|
|
if ((start & (mtd->erasesize - 1)) != 0) {
|
|
printf ("nand_unlock: Start address must be beginning of "
|
|
"nand block!\n");
|
|
ret = -1;
|
|
goto out;
|
|
}
|
|
|
|
if (length == 0 || (length & (mtd->erasesize - 1)) != 0) {
|
|
printf ("nand_unlock: Length must be a multiple of nand block "
|
|
"size %08x!\n", mtd->erasesize);
|
|
ret = -1;
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Set length so that the last address is set to the
|
|
* starting address of the last block
|
|
*/
|
|
length -= mtd->erasesize;
|
|
|
|
/* submit address of first page to unlock */
|
|
page = (int)(start >> chip->page_shift);
|
|
chip->cmdfunc(mtd, NAND_CMD_UNLOCK1, -1, page & chip->pagemask);
|
|
|
|
/* submit ADDRESS of LAST page to unlock */
|
|
page += (int)(length >> chip->page_shift);
|
|
chip->cmdfunc(mtd, NAND_CMD_UNLOCK2, -1, page & chip->pagemask);
|
|
|
|
/* call wait ready function */
|
|
status = chip->waitfunc(mtd, chip);
|
|
/* see if device thinks it succeeded */
|
|
if (status & 0x01) {
|
|
/* there was an error */
|
|
ret = -1;
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
/* de-select the NAND device */
|
|
chip->select_chip(mtd, -1);
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* check_skip_len
|
|
*
|
|
* Check if there are any bad blocks, and whether length including bad
|
|
* blocks fits into device
|
|
*
|
|
* @param nand NAND device
|
|
* @param offset offset in flash
|
|
* @param length image length
|
|
* @return 0 if the image fits and there are no bad blocks
|
|
* 1 if the image fits, but there are bad blocks
|
|
* -1 if the image does not fit
|
|
*/
|
|
static int check_skip_len(nand_info_t *nand, loff_t offset, size_t length)
|
|
{
|
|
size_t len_excl_bad = 0;
|
|
int ret = 0;
|
|
|
|
while (len_excl_bad < length) {
|
|
size_t block_len, block_off;
|
|
loff_t block_start;
|
|
|
|
if (offset >= nand->size)
|
|
return -1;
|
|
|
|
block_start = offset & ~(loff_t)(nand->erasesize - 1);
|
|
block_off = offset & (nand->erasesize - 1);
|
|
block_len = nand->erasesize - block_off;
|
|
|
|
if (!nand_block_isbad(nand, block_start))
|
|
len_excl_bad += block_len;
|
|
else
|
|
ret = 1;
|
|
|
|
offset += block_len;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* nand_write_skip_bad:
|
|
*
|
|
* Write image to NAND flash.
|
|
* Blocks that are marked bad are skipped and the is written to the next
|
|
* block instead as long as the image is short enough to fit even after
|
|
* skipping the bad blocks.
|
|
*
|
|
* @param nand NAND device
|
|
* @param offset offset in flash
|
|
* @param length buffer length
|
|
* @param buf buffer to read from
|
|
* @return 0 in case of success
|
|
*/
|
|
int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
|
|
u_char *buffer)
|
|
{
|
|
int rval;
|
|
size_t left_to_write = *length;
|
|
u_char *p_buffer = buffer;
|
|
int need_skip;
|
|
|
|
/*
|
|
* nand_write() handles unaligned, partial page writes.
|
|
*
|
|
* We allow length to be unaligned, for convenience in
|
|
* using the $filesize variable.
|
|
*
|
|
* However, starting at an unaligned offset makes the
|
|
* semantics of bad block skipping ambiguous (really,
|
|
* you should only start a block skipping access at a
|
|
* partition boundary). So don't try to handle that.
|
|
*/
|
|
if ((offset & (nand->writesize - 1)) != 0) {
|
|
printf ("Attempt to write non page aligned data\n");
|
|
*length = 0;
|
|
return -EINVAL;
|
|
}
|
|
|
|
need_skip = check_skip_len(nand, offset, *length);
|
|
if (need_skip < 0) {
|
|
printf ("Attempt to write outside the flash area\n");
|
|
*length = 0;
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!need_skip) {
|
|
rval = nand_write (nand, offset, length, buffer);
|
|
if (rval == 0)
|
|
return 0;
|
|
|
|
*length = 0;
|
|
printf ("NAND write to offset %llx failed %d\n",
|
|
offset, rval);
|
|
return rval;
|
|
}
|
|
|
|
while (left_to_write > 0) {
|
|
size_t block_offset = offset & (nand->erasesize - 1);
|
|
size_t write_size;
|
|
|
|
WATCHDOG_RESET ();
|
|
|
|
if (nand_block_isbad (nand, offset & ~(nand->erasesize - 1))) {
|
|
printf ("Skip bad block 0x%08llx\n",
|
|
offset & ~(nand->erasesize - 1));
|
|
offset += nand->erasesize - block_offset;
|
|
continue;
|
|
}
|
|
|
|
if (left_to_write < (nand->erasesize - block_offset))
|
|
write_size = left_to_write;
|
|
else
|
|
write_size = nand->erasesize - block_offset;
|
|
|
|
rval = nand_write (nand, offset, &write_size, p_buffer);
|
|
if (rval != 0) {
|
|
printf ("NAND write to offset %llx failed %d\n",
|
|
offset, rval);
|
|
*length -= left_to_write;
|
|
return rval;
|
|
}
|
|
|
|
left_to_write -= write_size;
|
|
offset += write_size;
|
|
p_buffer += write_size;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* nand_read_skip_bad:
|
|
*
|
|
* Read image from NAND flash.
|
|
* Blocks that are marked bad are skipped and the next block is readen
|
|
* instead as long as the image is short enough to fit even after skipping the
|
|
* bad blocks.
|
|
*
|
|
* @param nand NAND device
|
|
* @param offset offset in flash
|
|
* @param length buffer length, on return holds remaining bytes to read
|
|
* @param buffer buffer to write to
|
|
* @return 0 in case of success
|
|
*/
|
|
int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
|
|
u_char *buffer)
|
|
{
|
|
int rval;
|
|
size_t left_to_read = *length;
|
|
u_char *p_buffer = buffer;
|
|
int need_skip;
|
|
|
|
if ((offset & (nand->writesize - 1)) != 0) {
|
|
printf ("Attempt to read non page aligned data\n");
|
|
*length = 0;
|
|
return -EINVAL;
|
|
}
|
|
|
|
need_skip = check_skip_len(nand, offset, *length);
|
|
if (need_skip < 0) {
|
|
printf ("Attempt to read outside the flash area\n");
|
|
*length = 0;
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!need_skip) {
|
|
rval = nand_read (nand, offset, length, buffer);
|
|
if (!rval || rval == -EUCLEAN)
|
|
return 0;
|
|
|
|
*length = 0;
|
|
printf ("NAND read from offset %llx failed %d\n",
|
|
offset, rval);
|
|
return rval;
|
|
}
|
|
|
|
while (left_to_read > 0) {
|
|
size_t block_offset = offset & (nand->erasesize - 1);
|
|
size_t read_length;
|
|
|
|
WATCHDOG_RESET ();
|
|
|
|
if (nand_block_isbad (nand, offset & ~(nand->erasesize - 1))) {
|
|
printf ("Skipping bad block 0x%08llx\n",
|
|
offset & ~(nand->erasesize - 1));
|
|
offset += nand->erasesize - block_offset;
|
|
continue;
|
|
}
|
|
|
|
if (left_to_read < (nand->erasesize - block_offset))
|
|
read_length = left_to_read;
|
|
else
|
|
read_length = nand->erasesize - block_offset;
|
|
|
|
rval = nand_read (nand, offset, &read_length, p_buffer);
|
|
if (rval && rval != -EUCLEAN) {
|
|
printf ("NAND read from offset %llx failed %d\n",
|
|
offset, rval);
|
|
*length -= left_to_read;
|
|
return rval;
|
|
}
|
|
|
|
left_to_read -= read_length;
|
|
offset += read_length;
|
|
p_buffer += read_length;
|
|
}
|
|
|
|
return 0;
|
|
}
|