mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-16 23:18:51 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
197 lines
4.9 KiB
C
197 lines
4.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2011 Freescale Semiconductor, Inc.
|
|
*
|
|
* Author: Fabio Estevam <fabio.estevam@freescale.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/iomux-mx25.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <mmc.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <i2c.h>
|
|
#include <power/pmic.h>
|
|
#include <fsl_pmic.h>
|
|
#include <mc34704.h>
|
|
|
|
#define FEC_RESET_B IMX_GPIO_NR(4, 8)
|
|
#define FEC_ENABLE_B IMX_GPIO_NR(2, 3)
|
|
#define CARD_DETECT IMX_GPIO_NR(2, 1)
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
struct fsl_esdhc_cfg esdhc_cfg[1] = {
|
|
{IMX_MMC_SDHC1_BASE},
|
|
};
|
|
#endif
|
|
|
|
/*
|
|
* FIXME: need to revisit this
|
|
* The original code enabled PUE and 100-k pull-down without PKE, so the right
|
|
* value here is likely:
|
|
* 0 for no pull
|
|
* or:
|
|
* PAD_CTL_PUS_100K_DOWN for 100-k pull-down
|
|
*/
|
|
#define FEC_OUT_PAD_CTRL 0
|
|
|
|
#define I2C_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_ODE)
|
|
|
|
static void mx25pdk_fec_init(void)
|
|
{
|
|
static const iomux_v3_cfg_t fec_pads[] = {
|
|
MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
|
|
MX25_PAD_FEC_RX_DV__FEC_RX_DV,
|
|
MX25_PAD_FEC_RDATA0__FEC_RDATA0,
|
|
NEW_PAD_CTRL(MX25_PAD_FEC_TDATA0__FEC_TDATA0, FEC_OUT_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX25_PAD_FEC_TX_EN__FEC_TX_EN, FEC_OUT_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX25_PAD_FEC_MDC__FEC_MDC, FEC_OUT_PAD_CTRL),
|
|
MX25_PAD_FEC_MDIO__FEC_MDIO,
|
|
MX25_PAD_FEC_RDATA1__FEC_RDATA1,
|
|
NEW_PAD_CTRL(MX25_PAD_FEC_TDATA1__FEC_TDATA1, FEC_OUT_PAD_CTRL),
|
|
|
|
NEW_PAD_CTRL(MX25_PAD_D12__GPIO_4_8, 0), /* FEC_RESET_B */
|
|
NEW_PAD_CTRL(MX25_PAD_A17__GPIO_2_3, 0), /* FEC_ENABLE_B */
|
|
};
|
|
|
|
static const iomux_v3_cfg_t i2c_pads[] = {
|
|
NEW_PAD_CTRL(MX25_PAD_I2C1_CLK__I2C1_CLK, I2C_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX25_PAD_I2C1_DAT__I2C1_DAT, I2C_PAD_CTRL),
|
|
};
|
|
|
|
imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
|
|
|
|
/* Assert RESET and ENABLE low */
|
|
gpio_direction_output(FEC_RESET_B, 0);
|
|
gpio_direction_output(FEC_ENABLE_B, 0);
|
|
|
|
udelay(10);
|
|
|
|
/* Deassert RESET and ENABLE */
|
|
gpio_set_value(FEC_RESET_B, 1);
|
|
gpio_set_value(FEC_ENABLE_B, 1);
|
|
|
|
/* Setup I2C pins so that PMIC can turn on PHY supply */
|
|
imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
/* dram_init must store complete ramsize in gd->ram_size */
|
|
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
|
|
PHYS_SDRAM_1_SIZE);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set up input pins with hysteresis and 100-k pull-ups
|
|
*/
|
|
#define UART1_IN_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP)
|
|
/*
|
|
* FIXME: need to revisit this
|
|
* The original code enabled PUE and 100-k pull-down without PKE, so the right
|
|
* value here is likely:
|
|
* 0 for no pull
|
|
* or:
|
|
* PAD_CTL_PUS_100K_DOWN for 100-k pull-down
|
|
*/
|
|
#define UART1_OUT_PAD_CTRL 0
|
|
|
|
static void mx25pdk_uart1_init(void)
|
|
{
|
|
static const iomux_v3_cfg_t uart1_pads[] = {
|
|
NEW_PAD_CTRL(MX25_PAD_UART1_RXD__UART1_RXD, UART1_IN_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX25_PAD_UART1_TXD__UART1_TXD, UART1_OUT_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX25_PAD_UART1_RTS__UART1_RTS, UART1_OUT_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX25_PAD_UART1_CTS__UART1_CTS, UART1_IN_PAD_CTRL),
|
|
};
|
|
|
|
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
mx25pdk_uart1_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* address of boot parameters */
|
|
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_late_init(void)
|
|
{
|
|
struct pmic *p;
|
|
int ret;
|
|
|
|
mx25pdk_fec_init();
|
|
|
|
ret = pmic_init(I2C_0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
p = pmic_get("FSL_PMIC");
|
|
if (!p)
|
|
return -ENODEV;
|
|
|
|
/* Turn on Ethernet PHY and LCD supplies */
|
|
pmic_reg_write(p, MC34704_GENERAL2_REG, ONOFFE | ONOFFA);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
int board_mmc_getcd(struct mmc *mmc)
|
|
{
|
|
/* Set up the Card Detect pin. */
|
|
imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX25_PAD_A15__GPIO_2_1, 0));
|
|
|
|
gpio_direction_input(CARD_DETECT);
|
|
return !gpio_get_value(CARD_DETECT);
|
|
}
|
|
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
static const iomux_v3_cfg_t sdhc1_pads[] = {
|
|
NEW_PAD_CTRL(MX25_PAD_SD1_CMD__SD1_CMD, NO_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX25_PAD_SD1_CLK__SD1_CLK, NO_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX25_PAD_SD1_DATA0__SD1_DATA0, NO_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX25_PAD_SD1_DATA1__SD1_DATA1, NO_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX25_PAD_SD1_DATA2__SD1_DATA2, NO_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX25_PAD_SD1_DATA3__SD1_DATA3, NO_PAD_CTRL),
|
|
};
|
|
|
|
imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads));
|
|
|
|
/*
|
|
* Set the eSDHC1 PER clock to the maximum frequency lower than or equal
|
|
* to 50 MHz that can be obtained, which requires to use UPLL as the
|
|
* clock source. This actually gives 48 MHz.
|
|
*/
|
|
imx_set_perclk(MXC_ESDHC1_CLK, true, 50000000);
|
|
esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
|
|
return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
|
|
}
|
|
#endif
|
|
|
|
int checkboard(void)
|
|
{
|
|
puts("Board: MX25PDK\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Lowlevel init isn't used on mx25pdk, so just provide a dummy one here */
|
|
void lowlevel_init(void) {}
|