mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-16 23:18:51 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
770 lines
23 KiB
C
770 lines
23 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2009-2011 Freescale Semiconductor, Inc.
|
|
* Author: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
|
|
*/
|
|
|
|
/*
|
|
* This file handles the board muxing between the Fman Ethernet MACs and
|
|
* the RGMII/SGMII/XGMII PHYs on a Freescale P5040 "Super Hydra" reference
|
|
* board. The RGMII PHYs are the two on-board 1Gb ports. The SGMII PHYs are
|
|
* provided by the standard Freescale four-port SGMII riser card. The 10Gb
|
|
* XGMII PHYs are provided via the XAUI riser card. The P5040 has 2 FMans
|
|
* and 5 1G interfaces and 10G interface per FMan. Based on the options in
|
|
* the RCW, we could have upto 3 SGMII cards and 1 XAUI card at a time.
|
|
*
|
|
* Muxing is handled via the PIXIS BRDCFG1 register. The EMI1 bits control
|
|
* muxing among the RGMII PHYs and the SGMII PHYs. The value for RGMII is
|
|
* always the same (0). The value for SGMII depends on which slot the riser is
|
|
* inserted in. The EMI2 bits control muxing for the the XGMII. Like SGMII,
|
|
* the value is based on which slot the XAUI is inserted in.
|
|
*
|
|
* The SERDES configuration is used to determine where the SGMII and XAUI cards
|
|
* exist, and also which Fman's MACs are routed to which PHYs. So for a given
|
|
* Fman MAC, there is one and only PHY it connects to. MACs cannot be routed
|
|
* to PHYs dynamically.
|
|
*
|
|
*
|
|
* This file also updates the device tree in three ways:
|
|
*
|
|
* 1) The status of each virtual MDIO node that is referenced by an Ethernet
|
|
* node is set to "okay".
|
|
*
|
|
* 2) The phy-handle property of each active Ethernet MAC node is set to the
|
|
* appropriate PHY node.
|
|
*
|
|
* 3) The "mux value" for each virtual MDIO node is set to the correct value,
|
|
* if necessary. Some virtual MDIO nodes do not have configurable mux
|
|
* values, so those values are hard-coded in the DTS. On the HYDRA board,
|
|
* the virtual MDIO node for the SGMII card needs to be updated.
|
|
*
|
|
* For all this to work, the device tree needs to have the following:
|
|
*
|
|
* 1) An alias for each PHY node that an Ethernet node could be routed to.
|
|
*
|
|
* 2) An alias for each real and virtual MDIO node that is disabled by default
|
|
* and might need to be enabled, and also might need to have its mux-value
|
|
* updated.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <netdev.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <fm_eth.h>
|
|
#include <fsl_mdio.h>
|
|
#include <malloc.h>
|
|
#include <fdt_support.h>
|
|
#include <fsl_dtsec.h>
|
|
|
|
#include "../common/ngpixis.h"
|
|
#include "../common/fman.h"
|
|
|
|
#ifdef CONFIG_FMAN_ENET
|
|
|
|
#define BRDCFG1_EMI1_SEL_MASK 0x70
|
|
#define BRDCFG1_EMI1_SEL_SLOT1 0x10
|
|
#define BRDCFG1_EMI1_SEL_SLOT2 0x20
|
|
#define BRDCFG1_EMI1_SEL_SLOT5 0x30
|
|
#define BRDCFG1_EMI1_SEL_SLOT6 0x40
|
|
#define BRDCFG1_EMI1_SEL_SLOT7 0x50
|
|
#define BRDCFG1_EMI1_SEL_SLOT3 0x60
|
|
#define BRDCFG1_EMI1_SEL_RGMII 0x00
|
|
#define BRDCFG1_EMI1_EN 0x08
|
|
#define BRDCFG1_EMI2_SEL_MASK 0x06
|
|
#define BRDCFG1_EMI2_SEL_SLOT1 0x00
|
|
#define BRDCFG1_EMI2_SEL_SLOT2 0x02
|
|
|
|
#define BRDCFG2_REG_GPIO_SEL 0x20
|
|
|
|
/* SGMII */
|
|
#define PHY_BASE_ADDR 0x00
|
|
#define REGNUM 0x00
|
|
#define PORT_NUM_FM1 0x04
|
|
#define PORT_NUM_FM2 0x02
|
|
|
|
/*
|
|
* BRDCFG1 mask and value for each MAC
|
|
*
|
|
* This array contains the BRDCFG1 values (in mask/val format) that route the
|
|
* MDIO bus to a particular RGMII or SGMII PHY.
|
|
*/
|
|
static struct {
|
|
u8 mask;
|
|
u8 val;
|
|
} mdio_mux[NUM_FM_PORTS];
|
|
|
|
/*
|
|
* Mapping of all 18 SERDES lanes to board slots. A value of '0' here means
|
|
* that the mapping must be determined dynamically, or that the lane maps to
|
|
* something other than a board slot
|
|
*/
|
|
static u8 lane_to_slot[] = {
|
|
7, 7, 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 2, 2, 1, 1, 0, 0, 0, 0
|
|
};
|
|
|
|
/*
|
|
* Set the board muxing for a given MAC
|
|
*
|
|
* The MDIO layer calls this function every time it wants to talk to a PHY.
|
|
*/
|
|
void super_hydra_mux_mdio(u8 mask, u8 val)
|
|
{
|
|
clrsetbits_8(&pixis->brdcfg1, mask, val);
|
|
}
|
|
|
|
struct super_hydra_mdio {
|
|
u8 mask;
|
|
u8 val;
|
|
struct mii_dev *realbus;
|
|
};
|
|
|
|
static int super_hydra_mdio_read(struct mii_dev *bus, int addr, int devad,
|
|
int regnum)
|
|
{
|
|
struct super_hydra_mdio *priv = bus->priv;
|
|
|
|
super_hydra_mux_mdio(priv->mask, priv->val);
|
|
|
|
return priv->realbus->read(priv->realbus, addr, devad, regnum);
|
|
}
|
|
|
|
static int super_hydra_mdio_write(struct mii_dev *bus, int addr, int devad,
|
|
int regnum, u16 value)
|
|
{
|
|
struct super_hydra_mdio *priv = bus->priv;
|
|
|
|
super_hydra_mux_mdio(priv->mask, priv->val);
|
|
|
|
return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
|
|
}
|
|
|
|
static int super_hydra_mdio_reset(struct mii_dev *bus)
|
|
{
|
|
struct super_hydra_mdio *priv = bus->priv;
|
|
|
|
return priv->realbus->reset(priv->realbus);
|
|
}
|
|
|
|
static void super_hydra_mdio_set_mux(char *name, u8 mask, u8 val)
|
|
{
|
|
struct mii_dev *bus = miiphy_get_dev_by_name(name);
|
|
struct super_hydra_mdio *priv = bus->priv;
|
|
|
|
priv->mask = mask;
|
|
priv->val = val;
|
|
}
|
|
|
|
static int super_hydra_mdio_init(char *realbusname, char *fakebusname)
|
|
{
|
|
struct super_hydra_mdio *hmdio;
|
|
struct mii_dev *bus = mdio_alloc();
|
|
|
|
if (!bus) {
|
|
printf("Failed to allocate Hydra MDIO bus\n");
|
|
return -1;
|
|
}
|
|
|
|
hmdio = malloc(sizeof(*hmdio));
|
|
if (!hmdio) {
|
|
printf("Failed to allocate Hydra private data\n");
|
|
free(bus);
|
|
return -1;
|
|
}
|
|
|
|
bus->read = super_hydra_mdio_read;
|
|
bus->write = super_hydra_mdio_write;
|
|
bus->reset = super_hydra_mdio_reset;
|
|
strcpy(bus->name, fakebusname);
|
|
|
|
hmdio->realbus = miiphy_get_dev_by_name(realbusname);
|
|
|
|
if (!hmdio->realbus) {
|
|
printf("No bus with name %s\n", realbusname);
|
|
free(bus);
|
|
free(hmdio);
|
|
return -1;
|
|
}
|
|
|
|
bus->priv = hmdio;
|
|
|
|
return mdio_register(bus);
|
|
}
|
|
|
|
/*
|
|
* Given the following ...
|
|
*
|
|
* 1) A pointer to an Fman Ethernet node (as identified by the 'compat'
|
|
* compatible string and 'addr' physical address)
|
|
*
|
|
* 2) An Fman port
|
|
*
|
|
* ... update the phy-handle property of the Ethernet node to point to the
|
|
* right PHY. This assumes that we already know the PHY for each port. That
|
|
* information is stored in mdio_mux[].
|
|
*
|
|
* The offset of the Fman Ethernet node is also passed in for convenience, but
|
|
* it is not used.
|
|
*
|
|
* Note that what we call "Fman ports" (enum fm_port) is really an Fman MAC.
|
|
* Inside the Fman, "ports" are things that connect to MACs. We only call them
|
|
* ports in U-Boot because on previous Ethernet devices (e.g. Gianfar), MACs
|
|
* and ports are the same thing.
|
|
*/
|
|
void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
|
|
enum fm_port port, int offset)
|
|
{
|
|
enum srds_prtcl device;
|
|
int lane, slot, phy;
|
|
char alias[32];
|
|
|
|
/* RGMII and XGMII are already mapped correctly in the DTS */
|
|
|
|
if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
|
|
device = serdes_device_from_fm_port(port);
|
|
lane = serdes_get_first_lane(device);
|
|
slot = lane_to_slot[lane];
|
|
phy = fm_info_get_phy_address(port);
|
|
|
|
sprintf(alias, "phy_sgmii_slot%u_%x", slot, phy);
|
|
fdt_set_phy_handle(fdt, compat, addr, alias);
|
|
}
|
|
}
|
|
|
|
#define PIXIS_SW2_LANE_23_SEL 0x80
|
|
#define PIXIS_SW2_LANE_45_SEL 0x40
|
|
#define PIXIS_SW2_LANE_67_SEL_MASK 0x30
|
|
#define PIXIS_SW2_LANE_67_SEL_5 0x00
|
|
#define PIXIS_SW2_LANE_67_SEL_6 0x20
|
|
#define PIXIS_SW2_LANE_67_SEL_7 0x10
|
|
#define PIXIS_SW2_LANE_8_SEL 0x08
|
|
#define PIXIS_SW2_LANE_1617_SEL 0x04
|
|
#define PIXIS_SW11_LANE_9_SEL 0x04
|
|
/*
|
|
* Initialize the lane_to_slot[] array.
|
|
*
|
|
* On the P4080DS "Expedition" board, the mapping of SERDES lanes to board
|
|
* slots is hard-coded. On the Hydra board, however, the mapping is controlled
|
|
* by board switch SW2, so the lane_to_slot[] array needs to be dynamically
|
|
* initialized.
|
|
*/
|
|
static void initialize_lane_to_slot(void)
|
|
{
|
|
u8 sw2 = in_8(&PIXIS_SW(2));
|
|
/* SW11 appears in the programming model as SW9 */
|
|
u8 sw11 = in_8(&PIXIS_SW(9));
|
|
|
|
lane_to_slot[2] = (sw2 & PIXIS_SW2_LANE_23_SEL) ? 7 : 4;
|
|
lane_to_slot[3] = lane_to_slot[2];
|
|
|
|
lane_to_slot[4] = (sw2 & PIXIS_SW2_LANE_45_SEL) ? 7 : 6;
|
|
lane_to_slot[5] = lane_to_slot[4];
|
|
|
|
switch (sw2 & PIXIS_SW2_LANE_67_SEL_MASK) {
|
|
case PIXIS_SW2_LANE_67_SEL_5:
|
|
lane_to_slot[6] = 5;
|
|
break;
|
|
case PIXIS_SW2_LANE_67_SEL_6:
|
|
lane_to_slot[6] = 6;
|
|
break;
|
|
case PIXIS_SW2_LANE_67_SEL_7:
|
|
lane_to_slot[6] = 7;
|
|
break;
|
|
}
|
|
lane_to_slot[7] = lane_to_slot[6];
|
|
|
|
lane_to_slot[8] = (sw2 & PIXIS_SW2_LANE_8_SEL) ? 3 : 0;
|
|
lane_to_slot[9] = (sw11 & PIXIS_SW11_LANE_9_SEL) ? 0 : 3;
|
|
|
|
lane_to_slot[16] = (sw2 & PIXIS_SW2_LANE_1617_SEL) ? 1 : 0;
|
|
lane_to_slot[17] = lane_to_slot[16];
|
|
}
|
|
|
|
#endif /* #ifdef CONFIG_FMAN_ENET */
|
|
|
|
/*
|
|
* Configure the status for the virtual MDIO nodes
|
|
*
|
|
* Rather than create the virtual MDIO nodes from scratch for each active
|
|
* virtual MDIO, we expect the DTS to have the nodes defined already, and we
|
|
* only enable the ones that are actually active.
|
|
*
|
|
* We assume that the DTS already hard-codes the status for all the
|
|
* virtual MDIO nodes to "disabled", so all we need to do is enable the
|
|
* active ones.
|
|
*/
|
|
void fdt_fixup_board_enet(void *fdt)
|
|
{
|
|
#ifdef CONFIG_FMAN_ENET
|
|
enum fm_port i;
|
|
int lane, slot;
|
|
|
|
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
|
|
int idx = i - FM1_DTSEC1;
|
|
|
|
switch (fm_info_get_enet_if(i)) {
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
|
|
if (lane >= 0) {
|
|
char alias[32];
|
|
|
|
slot = lane_to_slot[lane];
|
|
sprintf(alias, "hydra_sg_slot%u", slot);
|
|
fdt_status_okay_by_alias(fdt, alias);
|
|
debug("Enabled MDIO node %s (slot %i)\n",
|
|
alias, slot);
|
|
}
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
fdt_status_okay_by_alias(fdt, "hydra_rg");
|
|
debug("Enabled MDIO node hydra_rg\n");
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
lane = serdes_get_first_lane(XAUI_FM1);
|
|
if (lane >= 0) {
|
|
char alias[32];
|
|
|
|
slot = lane_to_slot[lane];
|
|
sprintf(alias, "hydra_xg_slot%u", slot);
|
|
fdt_status_okay_by_alias(fdt, alias);
|
|
debug("Enabled MDIO node %s (slot %i)\n", alias, slot);
|
|
}
|
|
|
|
#if CONFIG_SYS_NUM_FMAN == 2
|
|
for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
|
|
int idx = i - FM2_DTSEC1;
|
|
|
|
switch (fm_info_get_enet_if(i)) {
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx);
|
|
if (lane >= 0) {
|
|
char alias[32];
|
|
|
|
slot = lane_to_slot[lane];
|
|
sprintf(alias, "hydra_sg_slot%u", slot);
|
|
fdt_status_okay_by_alias(fdt, alias);
|
|
debug("Enabled MDIO node %s (slot %i)\n",
|
|
alias, slot);
|
|
}
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
fdt_status_okay_by_alias(fdt, "hydra_rg");
|
|
debug("Enabled MDIO node hydra_rg\n");
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
lane = serdes_get_first_lane(XAUI_FM2);
|
|
if (lane >= 0) {
|
|
char alias[32];
|
|
|
|
slot = lane_to_slot[lane];
|
|
sprintf(alias, "hydra_xg_slot%u", slot);
|
|
fdt_status_okay_by_alias(fdt, alias);
|
|
debug("Enabled MDIO node %s (slot %i)\n", alias, slot);
|
|
}
|
|
#endif /* CONFIG_SYS_NUM_FMAN == 2 */
|
|
#endif /* CONFIG_FMAN_ENET */
|
|
}
|
|
|
|
/*
|
|
* Mapping of SerDes Protocol to MDIO MUX value and PHY address.
|
|
*
|
|
* Fman 1:
|
|
* DTSEC1 | DTSEC2 | DTSEC3 | DTSEC4
|
|
* Mux Phy | Mux Phy | Mux Phy | Mux Phy
|
|
* Value Addr | Value Addr | Value Addr | Value Addr
|
|
* 0x00 2 1c | 2 1d | 2 1e | 2 1f
|
|
* 0x01 | | 6 1c |
|
|
* 0x02 | | 3 1c | 3 1d
|
|
* 0x03 2 1c | 2 1d | 2 1e | 2 1f
|
|
* 0x04 2 1c | 2 1d | 2 1e | 2 1f
|
|
* 0x05 | | 3 1c | 3 1d
|
|
* 0x06 2 1c | 2 1d | 2 1e | 2 1f
|
|
* 0x07 | | 6 1c |
|
|
* 0x11 2 1c | 2 1d | 2 1e | 2 1f
|
|
* 0x2a 2 | | 2 1e | 2 1f
|
|
* 0x34 6 1c | 6 1d | 4 1e | 4 1f
|
|
* 0x35 | | 3 1c | 3 1d
|
|
* 0x36 6 1c | 6 1d | 4 1e | 4 1f
|
|
* | | |
|
|
* Fman 2: | | |
|
|
* DTSEC1 | DTSEC2 | DTSEC3 | DTSEC4
|
|
* EMI1 | EMI1 | EMI1 | EMI1
|
|
* Mux Phy | Mux Phy | Mux Phy | Mux Phy
|
|
* Value Addr | Value Addr | Value Addr | Value Addr
|
|
* 0x00 | | 6 1c | 6 1d
|
|
* 0x01 | | |
|
|
* 0x02 | | 6 1c | 6 1d
|
|
* 0x03 3 1c | 3 1d | 6 1c | 6 1d
|
|
* 0x04 3 1c | 3 1d | 6 1c | 6 1d
|
|
* 0x05 | | 6 1c | 6 1d
|
|
* 0x06 | | 6 1c | 6 1d
|
|
* 0x07 | | |
|
|
* 0x11 | | |
|
|
* 0x2a | | |
|
|
* 0x34 | | |
|
|
* 0x35 | | |
|
|
* 0x36 | | |
|
|
*/
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
#ifdef CONFIG_FMAN_ENET
|
|
struct fsl_pq_mdio_info dtsec_mdio_info;
|
|
struct tgec_mdio_info tgec_mdio_info;
|
|
unsigned int i, slot;
|
|
int lane;
|
|
struct mii_dev *bus;
|
|
int qsgmii;
|
|
int phy_real_addr;
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
int srds_prtcl = (in_be32(&gur->rcwsr[4]) &
|
|
FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
|
|
|
|
printf("Initializing Fman\n");
|
|
|
|
initialize_lane_to_slot();
|
|
|
|
/* We want to use the PIXIS to configure MUX routing, not GPIOs. */
|
|
setbits_8(&pixis->brdcfg2, BRDCFG2_REG_GPIO_SEL);
|
|
|
|
memset(mdio_mux, 0, sizeof(mdio_mux));
|
|
|
|
dtsec_mdio_info.regs =
|
|
(struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
|
|
dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
|
|
|
|
/* Register the real 1G MDIO bus */
|
|
fsl_pq_mdio_init(bis, &dtsec_mdio_info);
|
|
|
|
tgec_mdio_info.regs =
|
|
(struct tgec_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
|
|
tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
|
|
|
|
/* Register the real 10G MDIO bus */
|
|
fm_tgec_mdio_init(bis, &tgec_mdio_info);
|
|
|
|
/* Register the three virtual MDIO front-ends */
|
|
super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME,
|
|
"SUPER_HYDRA_RGMII_MDIO");
|
|
super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME,
|
|
"SUPER_HYDRA_FM1_SGMII_MDIO");
|
|
super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME,
|
|
"SUPER_HYDRA_FM2_SGMII_MDIO");
|
|
super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME,
|
|
"SUPER_HYDRA_FM3_SGMII_MDIO");
|
|
super_hydra_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME,
|
|
"SUPER_HYDRA_FM1_TGEC_MDIO");
|
|
super_hydra_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME,
|
|
"SUPER_HYDRA_FM2_TGEC_MDIO");
|
|
|
|
/*
|
|
* Program the DTSEC PHY addresses assuming that they are all SGMII.
|
|
* For any DTSEC that's RGMII, we'll override its PHY address later.
|
|
* We assume that DTSEC5 is only used for RGMII.
|
|
*/
|
|
fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_10GEC1, CONFIG_SYS_FM2_10GEC1_PHY_ADDR);
|
|
|
|
#if (CONFIG_SYS_NUM_FMAN == 2)
|
|
fm_info_set_phy_address(FM2_DTSEC1, CONFIG_SYS_FM2_DTSEC1_PHY_ADDR);
|
|
fm_info_set_phy_address(FM2_DTSEC2, CONFIG_SYS_FM2_DTSEC2_PHY_ADDR);
|
|
fm_info_set_phy_address(FM2_DTSEC3, CONFIG_SYS_FM2_DTSEC1_PHY_ADDR);
|
|
fm_info_set_phy_address(FM2_DTSEC4, CONFIG_SYS_FM2_DTSEC2_PHY_ADDR);
|
|
fm_info_set_phy_address(FM2_10GEC1, CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
|
|
#endif
|
|
|
|
switch (srds_prtcl) {
|
|
case 0:
|
|
case 3:
|
|
case 4:
|
|
case 6:
|
|
case 0x11:
|
|
case 0x2a:
|
|
case 0x34:
|
|
case 0x36:
|
|
fm_info_set_phy_address(FM1_DTSEC3,
|
|
CONFIG_SYS_FM1_DTSEC3_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC4,
|
|
CONFIG_SYS_FM1_DTSEC4_PHY_ADDR);
|
|
break;
|
|
case 1:
|
|
case 2:
|
|
case 5:
|
|
case 7:
|
|
case 0x35:
|
|
fm_info_set_phy_address(FM1_DTSEC3,
|
|
CONFIG_SYS_FM1_DTSEC1_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC4,
|
|
CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
|
|
break;
|
|
default:
|
|
printf("Fman: Unsupport SerDes Protocol 0x%02x\n", srds_prtcl);
|
|
break;
|
|
}
|
|
|
|
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
|
|
int idx = i - FM1_DTSEC1;
|
|
|
|
switch (fm_info_get_enet_if(i)) {
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
|
|
if (lane < 0)
|
|
break;
|
|
slot = lane_to_slot[lane];
|
|
mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK;
|
|
debug("FM1@DTSEC%u expects SGMII in slot %u\n",
|
|
idx + 1, slot);
|
|
switch (slot) {
|
|
case 1:
|
|
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT1 |
|
|
BRDCFG1_EMI1_EN;
|
|
break;
|
|
case 2:
|
|
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT2 |
|
|
BRDCFG1_EMI1_EN;
|
|
break;
|
|
case 3:
|
|
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT3 |
|
|
BRDCFG1_EMI1_EN;
|
|
break;
|
|
case 5:
|
|
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT5 |
|
|
BRDCFG1_EMI1_EN;
|
|
break;
|
|
case 6:
|
|
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT6 |
|
|
BRDCFG1_EMI1_EN;
|
|
break;
|
|
case 7:
|
|
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT7 |
|
|
BRDCFG1_EMI1_EN;
|
|
break;
|
|
};
|
|
|
|
super_hydra_mdio_set_mux("SUPER_HYDRA_FM1_SGMII_MDIO",
|
|
mdio_mux[i].mask, mdio_mux[i].val);
|
|
fm_info_set_mdio(i,
|
|
miiphy_get_dev_by_name("SUPER_HYDRA_FM1_SGMII_MDIO"));
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
/*
|
|
* FM1 DTSEC5 is routed via EC1 to the first on-board
|
|
* RGMII port. FM2 DTSEC5 is routed via EC2 to the
|
|
* second on-board RGMII port. The other DTSECs cannot
|
|
* be routed to RGMII.
|
|
*/
|
|
debug("FM1@DTSEC%u is RGMII at address %u\n",
|
|
idx + 1, 0);
|
|
fm_info_set_phy_address(i, 0);
|
|
mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK;
|
|
mdio_mux[i].val = BRDCFG1_EMI1_SEL_RGMII |
|
|
BRDCFG1_EMI1_EN;
|
|
super_hydra_mdio_set_mux("SUPER_HYDRA_RGMII_MDIO",
|
|
mdio_mux[i].mask, mdio_mux[i].val);
|
|
fm_info_set_mdio(i,
|
|
miiphy_get_dev_by_name("SUPER_HYDRA_RGMII_MDIO"));
|
|
break;
|
|
case PHY_INTERFACE_MODE_NONE:
|
|
fm_info_set_phy_address(i, 0);
|
|
break;
|
|
default:
|
|
printf("Fman1: DTSEC%u set to unknown interface %i\n",
|
|
idx + 1, fm_info_get_enet_if(i));
|
|
fm_info_set_phy_address(i, 0);
|
|
break;
|
|
}
|
|
}
|
|
|
|
bus = miiphy_get_dev_by_name("SUPER_HYDRA_FM1_SGMII_MDIO");
|
|
qsgmii = is_qsgmii_riser_card(bus, PHY_BASE_ADDR, PORT_NUM_FM1, REGNUM);
|
|
|
|
if (qsgmii) {
|
|
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + PORT_NUM_FM1; i++) {
|
|
if (fm_info_get_enet_if(i) ==
|
|
PHY_INTERFACE_MODE_SGMII) {
|
|
phy_real_addr = PHY_BASE_ADDR + i - FM1_DTSEC1;
|
|
fm_info_set_phy_address(i, phy_real_addr);
|
|
}
|
|
}
|
|
switch (srds_prtcl) {
|
|
case 0x00:
|
|
case 0x03:
|
|
case 0x04:
|
|
case 0x06:
|
|
case 0x11:
|
|
case 0x2a:
|
|
case 0x34:
|
|
case 0x36:
|
|
fm_info_set_phy_address(FM1_DTSEC3, PHY_BASE_ADDR + 2);
|
|
fm_info_set_phy_address(FM1_DTSEC4, PHY_BASE_ADDR + 3);
|
|
break;
|
|
case 0x01:
|
|
case 0x02:
|
|
case 0x05:
|
|
case 0x07:
|
|
case 0x35:
|
|
fm_info_set_phy_address(FM1_DTSEC3, PHY_BASE_ADDR + 0);
|
|
fm_info_set_phy_address(FM1_DTSEC4, PHY_BASE_ADDR + 1);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* For 10G, we only support one XAUI card per Fman. If present, then we
|
|
* force its routing and never touch those bits again, which removes the
|
|
* need for Linux to do any muxing. This works because of the way
|
|
* BRDCFG1 is defined, but it's a bit hackish.
|
|
*
|
|
* The PHY address for the XAUI card depends on which slot it's in. The
|
|
* macros we use imply that the PHY address is based on which FM, but
|
|
* that's not true. On the P4080DS, FM1 could only use XAUI in slot 5,
|
|
* and FM2 could only use a XAUI in slot 4. On the Hydra board, we
|
|
* check the actual slot and just use the macros as-is, even though
|
|
* the P3041 and P5020 only have one Fman.
|
|
*/
|
|
lane = serdes_get_first_lane(XAUI_FM1);
|
|
if (lane >= 0) {
|
|
debug("FM1@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]);
|
|
mdio_mux[i].mask = BRDCFG1_EMI2_SEL_MASK;
|
|
mdio_mux[i].val = BRDCFG1_EMI2_SEL_SLOT2;
|
|
super_hydra_mdio_set_mux("SUPER_HYDRA_FM1_TGEC_MDIO",
|
|
mdio_mux[i].mask, mdio_mux[i].val);
|
|
}
|
|
|
|
fm_info_set_mdio(FM1_10GEC1,
|
|
miiphy_get_dev_by_name("SUPER_HYDRA_FM1_TGEC_MDIO"));
|
|
|
|
#if (CONFIG_SYS_NUM_FMAN == 2)
|
|
for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
|
|
int idx = i - FM2_DTSEC1;
|
|
|
|
switch (fm_info_get_enet_if(i)) {
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx);
|
|
if (lane < 0)
|
|
break;
|
|
slot = lane_to_slot[lane];
|
|
mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK;
|
|
debug("FM2@DTSEC%u expects SGMII in slot %u\n",
|
|
idx + 1, slot);
|
|
switch (slot) {
|
|
case 1:
|
|
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT1 |
|
|
BRDCFG1_EMI1_EN;
|
|
break;
|
|
case 2:
|
|
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT2 |
|
|
BRDCFG1_EMI1_EN;
|
|
break;
|
|
case 3:
|
|
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT3 |
|
|
BRDCFG1_EMI1_EN;
|
|
break;
|
|
case 5:
|
|
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT5 |
|
|
BRDCFG1_EMI1_EN;
|
|
break;
|
|
case 6:
|
|
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT6 |
|
|
BRDCFG1_EMI1_EN;
|
|
break;
|
|
case 7:
|
|
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT7 |
|
|
BRDCFG1_EMI1_EN;
|
|
break;
|
|
};
|
|
|
|
if (i == FM2_DTSEC1 || i == FM2_DTSEC2) {
|
|
super_hydra_mdio_set_mux(
|
|
"SUPER_HYDRA_FM3_SGMII_MDIO",
|
|
mdio_mux[i].mask,
|
|
mdio_mux[i].val);
|
|
fm_info_set_mdio(i, miiphy_get_dev_by_name(
|
|
"SUPER_HYDRA_FM3_SGMII_MDIO"));
|
|
} else {
|
|
super_hydra_mdio_set_mux(
|
|
"SUPER_HYDRA_FM2_SGMII_MDIO",
|
|
mdio_mux[i].mask,
|
|
mdio_mux[i].val);
|
|
fm_info_set_mdio(i, miiphy_get_dev_by_name(
|
|
"SUPER_HYDRA_FM2_SGMII_MDIO"));
|
|
}
|
|
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
/*
|
|
* FM1 DTSEC5 is routed via EC1 to the first on-board
|
|
* RGMII port. FM2 DTSEC5 is routed via EC2 to the
|
|
* second on-board RGMII port. The other DTSECs cannot
|
|
* be routed to RGMII.
|
|
*/
|
|
debug("FM2@DTSEC%u is RGMII at address %u\n",
|
|
idx + 1, 1);
|
|
fm_info_set_phy_address(i, 1);
|
|
mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK;
|
|
mdio_mux[i].val = BRDCFG1_EMI1_SEL_RGMII |
|
|
BRDCFG1_EMI1_EN;
|
|
super_hydra_mdio_set_mux("SUPER_HYDRA_RGMII_MDIO",
|
|
mdio_mux[i].mask, mdio_mux[i].val);
|
|
fm_info_set_mdio(i,
|
|
miiphy_get_dev_by_name("SUPER_HYDRA_RGMII_MDIO"));
|
|
break;
|
|
case PHY_INTERFACE_MODE_NONE:
|
|
fm_info_set_phy_address(i, 0);
|
|
break;
|
|
default:
|
|
printf("Fman2: DTSEC%u set to unknown interface %i\n",
|
|
idx + 1, fm_info_get_enet_if(i));
|
|
fm_info_set_phy_address(i, 0);
|
|
break;
|
|
}
|
|
}
|
|
|
|
bus = miiphy_get_dev_by_name("SUPER_HYDRA_FM2_SGMII_MDIO");
|
|
set_sgmii_phy(bus, FM2_DTSEC3, PORT_NUM_FM2, PHY_BASE_ADDR);
|
|
bus = miiphy_get_dev_by_name("SUPER_HYDRA_FM3_SGMII_MDIO");
|
|
set_sgmii_phy(bus, FM2_DTSEC1, PORT_NUM_FM2, PHY_BASE_ADDR);
|
|
|
|
/*
|
|
* For 10G, we only support one XAUI card per Fman. If present, then we
|
|
* force its routing and never touch those bits again, which removes the
|
|
* need for Linux to do any muxing. This works because of the way
|
|
* BRDCFG1 is defined, but it's a bit hackish.
|
|
*
|
|
* The PHY address for the XAUI card depends on which slot it's in. The
|
|
* macros we use imply that the PHY address is based on which FM, but
|
|
* that's not true. On the P4080DS, FM1 could only use XAUI in slot 5,
|
|
* and FM2 could only use a XAUI in slot 4. On the Hydra board, we
|
|
* check the actual slot and just use the macros as-is, even though
|
|
* the P3041 and P5020 only have one Fman.
|
|
*/
|
|
lane = serdes_get_first_lane(XAUI_FM2);
|
|
if (lane >= 0) {
|
|
debug("FM2@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]);
|
|
mdio_mux[i].mask = BRDCFG1_EMI2_SEL_MASK;
|
|
mdio_mux[i].val = BRDCFG1_EMI2_SEL_SLOT1;
|
|
super_hydra_mdio_set_mux("SUPER_HYDRA_FM2_TGEC_MDIO",
|
|
mdio_mux[i].mask, mdio_mux[i].val);
|
|
}
|
|
|
|
fm_info_set_mdio(FM2_10GEC1,
|
|
miiphy_get_dev_by_name("SUPER_HYDRA_FM2_TGEC_MDIO"));
|
|
|
|
#endif
|
|
|
|
cpu_eth_init(bis);
|
|
#endif
|
|
|
|
return pci_eth_init(bis);
|
|
}
|