mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-25 03:18:51 +09:00
![Becky Bruce](/assets/img/avatar_default.png)
This patch changes the return type of initdram() from long int to phys_size_t. This is required for a couple of reasons: long int limits the amount of dram to 2GB, and u-boot in general is moving over to phys_size_t to represent the size of physical memory. phys_size_t is defined as an unsigned long on almost all current platforms. This patch *only* changes the return type of the initdram function (in include/common.h, as well as in each board's implementation of initdram). It does not actually modify the code inside the function on any of the platforms; platforms which wish to support more than 2GB of DRAM will need to modify their initdram() function code. Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc MPC8641HPCN. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
295 lines
7.8 KiB
C
295 lines
7.8 KiB
C
/*
|
|
* (C) Copyright 2000
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
* Ulrich Lutz, Speech Design GmbH, ulutz@datalab.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc8xx.h>
|
|
#include <commproc.h>
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static long int dram_size (long int, long int *, long int);
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#define _NOT_USED_ 0xFFFFFFFF
|
|
|
|
const uint sharc_table[] = {
|
|
/*
|
|
* Single Read. (Offset 0 in UPM RAM)
|
|
*/
|
|
0x0FF3FC04, 0x0FF3EC00, 0x7FFFEC04, 0xFFFFEC04,
|
|
0xFFFFEC05, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Burst Read. (Offset 8 in UPM RAM)
|
|
*/
|
|
/* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Single Write. (Offset 18 in UPM RAM)
|
|
*/
|
|
0x0FAFFC04, 0x0FAFEC00, 0x7FFFEC04, 0xFFFFEC04,
|
|
0xFFFFEC05, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Burst Write. (Offset 20 in UPM RAM)
|
|
*/
|
|
/* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Refresh (Offset 30 in UPM RAM)
|
|
*/
|
|
/* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Exception. (Offset 3c in UPM RAM)
|
|
*/
|
|
0x7FFFFC07, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
};
|
|
|
|
|
|
const uint sdram_table[] = {
|
|
/*
|
|
* Single Read. (Offset 0 in UPM RAM)
|
|
*/
|
|
0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
|
|
0x1FF77C47, /* last */
|
|
/*
|
|
* SDRAM Initialization (offset 5 in UPM RAM)
|
|
*
|
|
* This is no UPM entry point. The following definition uses
|
|
* the remaining space to establish an initialization
|
|
* sequence, which is executed by a RUN command.
|
|
*
|
|
*/
|
|
0x1FF77C35, 0xEFEABC34, 0x1FB57C35, /* last */
|
|
/*
|
|
* Burst Read. (Offset 8 in UPM RAM)
|
|
*/
|
|
0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
|
|
0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Single Write. (Offset 18 in UPM RAM)
|
|
*/
|
|
0x1F27FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Burst Write. (Offset 20 in UPM RAM)
|
|
*/
|
|
0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
|
|
0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */
|
|
_NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Refresh (Offset 30 in UPM RAM)
|
|
*/
|
|
0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
|
|
0xFFFFFC84, 0xFFFFFC07, /* last */
|
|
_NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Exception. (Offset 3c in UPM RAM)
|
|
*/
|
|
0x7FFFFC07, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*
|
|
*/
|
|
|
|
int checkboard (void)
|
|
{
|
|
puts ("Board: SPD823TS\n");
|
|
return (0);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
long int size_b0;
|
|
|
|
#if 0
|
|
/*
|
|
* Map controller bank 2 to the SRAM bank at preliminary address.
|
|
*/
|
|
memctl->memc_or2 = CFG_OR2;
|
|
memctl->memc_br2 = CFG_BR2;
|
|
#endif
|
|
|
|
/*
|
|
* Map controller bank 4 to the PER8 bank.
|
|
*/
|
|
memctl->memc_or4 = CFG_OR4;
|
|
memctl->memc_br4 = CFG_BR4;
|
|
|
|
#if 0
|
|
/* Configure SHARC at UMA */
|
|
upmconfig (UPMA, (uint *) sharc_table,
|
|
sizeof (sharc_table) / sizeof (uint));
|
|
/* Map controller bank 5 to the SHARC */
|
|
memctl->memc_or5 = CFG_OR5;
|
|
memctl->memc_br5 = CFG_BR5;
|
|
#endif
|
|
|
|
memctl->memc_mamr = 0x00001000;
|
|
|
|
/* Configure SDRAM at UMB */
|
|
upmconfig (UPMB, (uint *) sdram_table,
|
|
sizeof (sdram_table) / sizeof (uint));
|
|
|
|
memctl->memc_mptpr = CFG_MPTPR_1BK_8K;
|
|
|
|
memctl->memc_mar = 0x00000088;
|
|
|
|
/*
|
|
* Map controller bank 3 to the SDRAM bank at preliminary address.
|
|
*/
|
|
memctl->memc_or3 = CFG_OR3_PRELIM;
|
|
memctl->memc_br3 = CFG_BR3_PRELIM;
|
|
|
|
memctl->memc_mbmr = CFG_MBMR_8COL; /* refresh not enabled yet */
|
|
|
|
udelay (200);
|
|
memctl->memc_mcr = 0x80806105;
|
|
udelay (1);
|
|
memctl->memc_mcr = 0x80806130;
|
|
udelay (1);
|
|
memctl->memc_mcr = 0x80806130;
|
|
udelay (1);
|
|
memctl->memc_mcr = 0x80806106;
|
|
|
|
memctl->memc_mbmr |= MBMR_PTBE; /* refresh enabled */
|
|
|
|
/*
|
|
* Check Bank 0 Memory Size for re-configuration
|
|
*/
|
|
size_b0 =
|
|
dram_size (CFG_MBMR_8COL, SDRAM_BASE3_PRELIM,
|
|
SDRAM_MAX_SIZE);
|
|
|
|
memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE;
|
|
|
|
return (size_b0);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* Check memory range for valid RAM. A simple memory test determines
|
|
* the actually available RAM size between addresses `base' and
|
|
* `base + maxsize'. Some (not all) hardware errors are detected:
|
|
* - short between address lines
|
|
* - short between data lines
|
|
*/
|
|
|
|
static long int dram_size (long int mamr_value, long int *base,
|
|
long int maxsize)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
|
|
memctl->memc_mbmr = mamr_value;
|
|
|
|
return (get_ram_size (base, maxsize));
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
void reset_phy (void)
|
|
{
|
|
immap_t *immr = (immap_t *) CFG_IMMR;
|
|
ushort sreg;
|
|
|
|
/* Configure extra port pins for NS DP83843 PHY */
|
|
immr->im_ioport.iop_papar &= ~(PA_ENET_MDC | PA_ENET_MDIO);
|
|
|
|
sreg = immr->im_ioport.iop_padir;
|
|
sreg |= PA_ENET_MDC; /* Mgmt. Data Clock is Output */
|
|
sreg &= ~(PA_ENET_MDIO); /* Mgmt. Data I/O is bidirect. => Input */
|
|
immr->im_ioport.iop_padir = sreg;
|
|
|
|
immr->im_ioport.iop_padat &= ~(PA_ENET_MDC); /* set MDC = 0 */
|
|
|
|
/*
|
|
* RESET in implemented by a positive pulse of at least 1 us
|
|
* at the reset pin.
|
|
*
|
|
* Configure RESET pins for NS DP83843 PHY, and RESET chip.
|
|
*
|
|
* Note: The RESET pin is high active, but there is an
|
|
* inverter on the SPD823TS board...
|
|
*/
|
|
immr->im_ioport.iop_pcpar &= ~(PC_ENET_RESET);
|
|
immr->im_ioport.iop_pcdir |= PC_ENET_RESET;
|
|
/* assert RESET signal of PHY */
|
|
immr->im_ioport.iop_pcdat &= ~(PC_ENET_RESET);
|
|
udelay (10);
|
|
/* de-assert RESET signal of PHY */
|
|
immr->im_ioport.iop_pcdat |= PC_ENET_RESET;
|
|
udelay (10);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
void ide_set_reset (int on)
|
|
{
|
|
volatile immap_t *immr = (immap_t *) CFG_IMMR;
|
|
|
|
/*
|
|
* Configure PC for IDE Reset Pin
|
|
*/
|
|
if (on) { /* assert RESET */
|
|
immr->im_ioport.iop_pcdat &= ~(CFG_PC_IDE_RESET);
|
|
} else { /* release RESET */
|
|
immr->im_ioport.iop_pcdat |= CFG_PC_IDE_RESET;
|
|
}
|
|
|
|
/* program port pin as GPIO output */
|
|
immr->im_ioport.iop_pcpar &= ~(CFG_PC_IDE_RESET);
|
|
immr->im_ioport.iop_pcso &= ~(CFG_PC_IDE_RESET);
|
|
immr->im_ioport.iop_pcdir |= CFG_PC_IDE_RESET;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|