Stefan Brüns d2ff51b372 usb: dwc2: Add SPLIT INTERRUPT transaction support ... CSPLITs for INTERRUPT transactions have to be scheduled in each microframe following the SSPLIT. INTERRUPT transfers are executed in the next even/ odd microframe depending on the HCCHAR_ODDFRM flag. As there are no handshakes for INTERRUPT SSPLITs the SSPLIT may have failed (transport error) without the error being detected by the host driver. If the last CSPLIT is not received within 4 microframes after the SSPLIT there was a transaction error and the complete transaction has to be restarted. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>		2016-01-23 16:21:11 +01:00
..
dwc2.c	usb: dwc2: Add SPLIT INTERRUPT transaction support	2016-01-23 16:21:11 +01:00
dwc2.h	usb: dwc2: Add SPLIT INTERRUPT transaction support	2016-01-23 16:21:11 +01:00
ehci-armada100.c	usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.	2013-10-20 23:46:27 +02:00
ehci-atmel.c	USB: ehci-atmel: use pcr to enable or disable clock	2014-09-19 00:11:21 +02:00
ehci-exynos.c	usb: host: ehci: samsung: Move hcor initialization after usb phy setup	2015-12-17 21:54:41 +01:00
ehci-faraday.c	dm: usb: Drop the EHCI weak functions	2015-04-18 11:11:24 -06:00
ehci-fsl.c	drivers: usb: fsl: Return if USB_MAX_CONTROLLER_COUNT is incorrect	2015-06-07 15:46:02 +02:00
ehci-generic.c	usb: add support for generic EHCI devices	2015-12-07 00:14:59 +01:00
ehci-hcd.c	usb: Move determination of TT hub address/port into separate function	2015-12-31 16:16:29 +01:00
ehci-marvell.c	usb: ehci-marvell.c: Add DM support	2015-10-21 02:25:01 +02:00
ehci-mpc512x.c	powerpc/usb:Differentiate USB controller base address	2013-10-24 09:35:09 -07:00
ehci-mx5.c	dm: usb: Drop the EHCI weak functions	2015-04-18 11:11:24 -06:00
ehci-mx6.c	imx: usb: ehci-mx6: wait_for_bit to check reg status	2015-08-19 22:30:20 +02:00
ehci-mxc.c	usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.	2013-10-20 23:46:27 +02:00
ehci-mxs.c	usb: ehci: mxs: Add board-specific callbacks	2014-09-29 09:02:16 +02:00
ehci-omap.c	usb: ehci-omap: Reset the USB Host OMAP module	2013-12-06 07:02:32 -05:00
ehci-pci.c	dm: usb: Convert echi-pci to use new DM PCI API	2016-01-12 10:19:09 -07:00
ehci-ppc4xx.c	usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.	2013-10-20 23:46:27 +02:00
ehci-rmobile.c	usb: rmobile: Use ARRAY_SIZE(usb_base_address) instead of CONFIG_USB_MAX_CONTROLLER_COUNT	2014-11-07 16:32:02 +01:00
ehci-spear.c	usb: spear: Add support for both SPEAr600 EHCI controllers	2015-08-19 22:30:20 +02:00
ehci-sunxi.c	sunxi: usb: Rename the sunxi usb driver DM entry	2015-12-07 00:14:59 +01:00
ehci-tegra.c	dm: Use dev_get_addr() where possible	2015-08-31 07:57:26 -06:00
ehci-uniphier.c	ARM: UniPhier: replace <asm/io.h> with <linux/io.h>	2015-05-31 02:53:56 +09:00
ehci-vct.c	usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.	2013-10-20 23:46:27 +02:00
ehci-vf.c	usb: host: ehci-vf: Implement board_usb_phy_mode weak function	2016-01-16 07:06:55 +01:00
ehci-zynq.c	ARM: zynq: ehci: Added USB host driver support	2014-05-14 07:43:35 +02:00
ehci.h	usb: ehci: remember init mode	2015-09-07 13:41:05 +02:00
isp116x-hcd.c	include: move various macros to include/linux/kernel.h	2014-11-20 11:28:25 -05:00
isp116x.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
Kconfig	usb: add support of generic OHCI devices	2015-12-17 21:54:41 +01:00
Makefile	usb: add support of generic OHCI devices	2015-12-17 21:54:41 +01:00
ohci-at91.c	USB: ohci-at91: use pcr to enable or disable clock	2014-09-19 00:11:20 +02:00
ohci-da8xx.c	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
ohci-ep93xx.c	arm: ep9315: Return back Cirrus Logic EDB9315A board support	2014-07-04 23:45:48 +02:00
ohci-generic.c	usb: add support of generic OHCI devices	2015-12-17 21:54:41 +01:00
ohci-hcd.c	ohci: Add missing cache-flush for hcca area	2015-11-03 17:29:33 +01:00
ohci-lpc32xx.c	usb: lpc32xx: add host USB driver	2015-08-18 13:45:57 -04:00
ohci-s3c24xx.c	include: move various macros to include/linux/kernel.h	2014-11-20 11:28:25 -05:00
ohci-s3c24xx.h	dm: Move s3c24xx USB driver to a proper place	2012-10-18 06:54:18 +02:00
ohci-sunxi.c	sunxi: usb-phy: Never power off the usb ports	2015-08-08 16:26:19 +02:00
ohci.h	usb: ohci: enable cache support	2015-08-12 20:47:48 -04:00
r8a66597-hcd.c	Move console definitions into a new console.h file	2015-11-19 20:27:50 -07:00
r8a66597.h	usb: Update some EHCI driver licenses to use SPDX	2015-07-21 17:39:38 -06:00
sl811-hcd.c	usb: add enum usb_init_type parameter to usb_lowlevel_init	2013-10-20 23:45:26 +02:00
sl811.h	drivers/usb: regorganisation	2009-04-06 20:40:46 +02:00
usb-sandbox.c	usb: sandbox: Add support for interrupt operations	2015-11-19 20:27:52 -07:00
usb-uclass.c	dm: usb: Remove inactive children after a bus scan	2015-11-19 20:27:52 -07:00
utmi-armada100.c	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
xhci-dwc3.c	usb: xhci: dwc3: Adding reset delay requirement as per dwc3 databook	2015-12-07 00:15:00 +01:00
xhci-exynos5.c	dm: Use dev_get_addr() where possible	2015-08-31 07:57:26 -06:00
xhci-fsl.c	usb: xhci: fsl: Removing unused function usb_phy_reset	2015-12-07 00:15:00 +01:00
xhci-keystone.c	usb: xhci: keystone: Remove common dwc3 drv functions calls	2015-07-22 08:55:44 +02:00
xhci-mem.c	dm: usb: Support driver model in XHCI	2015-04-18 11:11:28 -06:00
xhci-omap.c	usb: host: xhci-omap: fix build break	2015-12-07 00:14:59 +01:00
xhci-pci.c	usb: pci: Add XHCI driver for PCI	2015-02-05 22:16:42 -07:00
xhci-ring.c	dm: usb: xhci: Use a function to get xhci_ctrl	2015-04-18 11:11:28 -06:00
xhci-uniphier.c	ARM: UniPhier: replace <asm/io.h> with <linux/io.h>	2015-05-31 02:53:56 +09:00
xhci-zynqmp.c	usb: xhci: zynqmp: Removing unused function usb_phy_reset	2015-12-07 00:15:00 +01:00
xhci.c	dm: Rename dev_get_parentdata() to dev_get_parent_priv()	2015-10-23 09:42:28 -06:00
xhci.h	dm: usb: Support driver model in XHCI	2015-04-18 11:11:28 -06:00