mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-25 03:18:51 +09:00
![]() When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
||
---|---|---|
.. | ||
imximage.cfg | ||
Kconfig | ||
MAINTAINERS | ||
Makefile | ||
pico-imx7d.c | ||
README |
How to update U-Boot on pico-imx7d board ---------------------------------------- Required software on the host PC: - imx_usb_loader: https://github.com/boundarydevices/imx_usb_loader Build U-Boot for pico: $ make mrproper $ make pico-imx7d_defconfig $ make This generates the U-Boot binary called u-boot.imx. Put pico board in USB download mode (refer to the PICO-iMX7D Quick Start Guide page 3) Connect a USB to serial adapter between the host PC and pico. Connect a USB cable between the OTG pico port and the host PC. Open a terminal program such as minicom. Copy u-boot.imx to the imx_usb_loader folder. Load u-boot.imx via USB: $ sudo ./imx_usb u-boot.imx Then U-Boot starts and its messages appear in the console program. Use the default environment variables: => env default -f -a => saveenv Run the UMS command: => ums 0 mmc 0 Transfer u-boot.imx to be flashed into the eMMC: $ sudo dd if=u-boot.imx of=/dev/sdX bs=1K seek=1; sync Remove power from the pico board. Put pico board into normal boot mode. Power up the board and the new updated U-Boot should boot from eMMC. Building U-Boot to boot with NXP 4.1 kernel: The NXP 4.1 kernel boots only in secure boot mode on mx7. Follow the next steps to enable secure boot: $ make mrproper $ make pico-imx7d_defconfig $ make menuconfig -> ARM architecture -> [*] Enable support for booting in non-secure mode -> [*] Boot in secure mode by default -> Exit $ make Flash u-boot.imx using the imx_usb_loader tool.