Peng Fan d239d9d946 imx: add i.MX8MN DDR4 board support ... Support pinctrl/clk/sdhc, include ddr4 timing data. Log: U-Boot SPL 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800) Normal Boot Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 U-Boot 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800) CPU: Freescale i.MX8MNano rev1.0 at 24 MHz Reset cause: POR Model: NXP i.MX8MNano DDR4 EVK board DRAM: 2 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>		2019-11-05 10:27:18 +01:00
..
clock_imx8mm.c	imx8m: add clk support for i.MX8MM	2019-10-08 16:36:36 +02:00
clock_imx8mq.c	imx: imx8mq: add init_nand_clk	2019-11-03 17:04:16 +01:00
clock_slice.c	imx8m: add clk support for i.MX8MN	2019-11-05 10:27:18 +01:00
imximage-8mm-lpddr4.cfg	imx8m: add image cfg for i.MX8MM lpddr4	2019-10-08 16:36:36 +02:00
imximage-8mn-ddr4.cfg	imx8m: add i.MX8MN ddr4 image cfg file	2019-11-05 10:27:18 +01:00
imximage.cfg	imx: imx8m: introduce imximage cfg file	2019-01-01 14:12:18 +01:00
Kconfig	imx: add i.MX8MN DDR4 board support	2019-11-05 10:27:18 +01:00
lowlevel_init.S	imx: rename mx8m,MX8M to imx8m,IMX8M	2019-01-01 14:12:18 +01:00
Makefile	imx8m: add clk support for i.MX8MN	2019-11-05 10:27:18 +01:00
soc.c	imx8mn: add get_boot_device	2019-11-05 10:27:18 +01:00