mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-31 22:39:08 +09:00
![Wolfgang Denk](/assets/img/avatar_default.png)
- Add IXP4xx NPE ethernet MAC support - Add support for Intel IXDPG425 board - Add support for Prodrive PDNB3 board - Add IRQ support Patch by Stefan Roese, 23 May 2006 [This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still sufferes from licensing issues. Blame Intel.]
526 lines
12 KiB
ArmAsm
526 lines
12 KiB
ArmAsm
/* vi: set ts=8 sw=8 noet: */
|
|
/*
|
|
* u-boot - Startup Code for XScale IXP
|
|
*
|
|
* Copyright (C) 2003 Kyle Harris <kharris@nexus-tech.net>
|
|
*
|
|
* Based on startup code example contained in the
|
|
* Intel IXP4xx Programmer's Guide and past u-boot Start.S
|
|
* samples.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <version.h>
|
|
#include <asm/arch/ixp425.h>
|
|
|
|
#define MMU_Control_M 0x001 /* Enable MMU */
|
|
#define MMU_Control_A 0x002 /* Enable address alignment faults */
|
|
#define MMU_Control_C 0x004 /* Enable cache */
|
|
#define MMU_Control_W 0x008 /* Enable write-buffer */
|
|
#define MMU_Control_P 0x010 /* Compatability: 32 bit code */
|
|
#define MMU_Control_D 0x020 /* Compatability: 32 bit data */
|
|
#define MMU_Control_L 0x040 /* Compatability: */
|
|
#define MMU_Control_B 0x080 /* Enable Big-Endian */
|
|
#define MMU_Control_S 0x100 /* Enable system protection */
|
|
#define MMU_Control_R 0x200 /* Enable ROM protection */
|
|
#define MMU_Control_I 0x1000 /* Enable Instruction cache */
|
|
#define MMU_Control_X 0x2000 /* Set interrupt vectors at 0xFFFF0000 */
|
|
#define MMU_Control_Init (MMU_Control_P|MMU_Control_D|MMU_Control_L)
|
|
|
|
|
|
/*
|
|
* Macro definitions
|
|
*/
|
|
/* Delay a bit */
|
|
.macro DELAY_FOR cycles, reg0
|
|
ldr \reg0, =\cycles
|
|
subs \reg0, \reg0, #1
|
|
subne pc, pc, #0xc
|
|
.endm
|
|
|
|
/* wait for coprocessor write complete */
|
|
.macro CPWAIT reg
|
|
mrc p15,0,\reg,c2,c0,0
|
|
mov \reg,\reg
|
|
sub pc,pc,#4
|
|
.endm
|
|
|
|
.globl _start
|
|
_start: b reset
|
|
ldr pc, _undefined_instruction
|
|
ldr pc, _software_interrupt
|
|
ldr pc, _prefetch_abort
|
|
ldr pc, _data_abort
|
|
ldr pc, _not_used
|
|
ldr pc, _irq
|
|
ldr pc, _fiq
|
|
|
|
_undefined_instruction: .word undefined_instruction
|
|
_software_interrupt: .word software_interrupt
|
|
_prefetch_abort: .word prefetch_abort
|
|
_data_abort: .word data_abort
|
|
_not_used: .word not_used
|
|
_irq: .word irq
|
|
_fiq: .word fiq
|
|
|
|
.balignl 16,0xdeadbeef
|
|
|
|
|
|
/*
|
|
* Startup Code (reset vector)
|
|
*
|
|
* do important init only if we don't start from memory!
|
|
* - relocate armboot to ram
|
|
* - setup stack
|
|
* - jump to second stage
|
|
*/
|
|
|
|
_TEXT_BASE:
|
|
.word TEXT_BASE
|
|
|
|
.globl _armboot_start
|
|
_armboot_start:
|
|
.word _start
|
|
|
|
/*
|
|
* These are defined in the board-specific linker script.
|
|
*/
|
|
.globl _bss_start
|
|
_bss_start:
|
|
.word __bss_start
|
|
|
|
.globl _bss_end
|
|
_bss_end:
|
|
.word _end
|
|
|
|
#ifdef CONFIG_USE_IRQ
|
|
/* IRQ stack memory (calculated at run-time) */
|
|
.globl IRQ_STACK_START
|
|
IRQ_STACK_START:
|
|
.word 0x0badc0de
|
|
|
|
/* IRQ stack memory (calculated at run-time) */
|
|
.globl FIQ_STACK_START
|
|
FIQ_STACK_START:
|
|
.word 0x0badc0de
|
|
#endif
|
|
|
|
/****************************************************************************/
|
|
/* */
|
|
/* the actual reset code */
|
|
/* */
|
|
/****************************************************************************/
|
|
|
|
reset:
|
|
/* disable mmu, set big-endian */
|
|
mov r0, #0xf8
|
|
mcr p15, 0, r0, c1, c0, 0
|
|
CPWAIT r0
|
|
|
|
/* invalidate I & D caches & BTB */
|
|
mcr p15, 0, r0, c7, c7, 0
|
|
CPWAIT r0
|
|
|
|
/* invalidate I & Data TLB */
|
|
mcr p15, 0, r0, c8, c7, 0
|
|
CPWAIT r0
|
|
|
|
/* drain write and fill buffers */
|
|
mcr p15, 0, r0, c7, c10, 4
|
|
CPWAIT r0
|
|
|
|
/* disable write buffer coalescing */
|
|
mrc p15, 0, r0, c1, c0, 1
|
|
orr r0, r0, #1
|
|
mcr p15, 0, r0, c1, c0, 1
|
|
CPWAIT r0
|
|
|
|
/* set EXP CS0 to the optimum timing */
|
|
ldr r1, =CFG_EXP_CS0
|
|
ldr r2, =IXP425_EXP_CS0
|
|
str r1, [r2]
|
|
|
|
/* make sure flash is visible at 0 */
|
|
#if 0
|
|
ldr r2, =IXP425_EXP_CFG0
|
|
ldr r1, [r2]
|
|
orr r1, r1, #0x80000000
|
|
str r1, [r2]
|
|
#endif
|
|
mov r1, #CFG_SDR_CONFIG
|
|
ldr r2, =IXP425_SDR_CONFIG
|
|
str r1, [r2]
|
|
|
|
/* disable refresh cycles */
|
|
mov r1, #0
|
|
ldr r3, =IXP425_SDR_REFRESH
|
|
str r1, [r3]
|
|
|
|
/* send nop command */
|
|
mov r1, #3
|
|
ldr r4, =IXP425_SDR_IR
|
|
str r1, [r4]
|
|
DELAY_FOR 0x4000, r0
|
|
|
|
/* set SDRAM internal refresh val */
|
|
ldr r1, =CFG_SDRAM_REFRESH_CNT
|
|
str r1, [r3]
|
|
DELAY_FOR 0x4000, r0
|
|
|
|
/* send precharge-all command to close all open banks */
|
|
mov r1, #2
|
|
str r1, [r4]
|
|
DELAY_FOR 0x4000, r0
|
|
|
|
/* provide 8 auto-refresh cycles */
|
|
mov r1, #4
|
|
mov r5, #8
|
|
111: str r1, [r4]
|
|
DELAY_FOR 0x100, r0
|
|
subs r5, r5, #1
|
|
bne 111b
|
|
|
|
/* set mode register in sdram */
|
|
mov r1, #CFG_SDR_MODE_CONFIG
|
|
str r1, [r4]
|
|
DELAY_FOR 0x4000, r0
|
|
|
|
/* send normal operation command */
|
|
mov r1, #6
|
|
str r1, [r4]
|
|
DELAY_FOR 0x4000, r0
|
|
|
|
/* copy */
|
|
mov r0, #0
|
|
mov r4, r0
|
|
add r2, r0, #CFG_MONITOR_LEN
|
|
mov r1, #0x10000000
|
|
mov r5, r1
|
|
|
|
30:
|
|
ldr r3, [r0], #4
|
|
str r3, [r1], #4
|
|
cmp r0, r2
|
|
bne 30b
|
|
|
|
/* invalidate I & D caches & BTB */
|
|
mcr p15, 0, r0, c7, c7, 0
|
|
CPWAIT r0
|
|
|
|
/* invalidate I & Data TLB */
|
|
mcr p15, 0, r0, c8, c7, 0
|
|
CPWAIT r0
|
|
|
|
/* drain write and fill buffers */
|
|
mcr p15, 0, r0, c7, c10, 4
|
|
CPWAIT r0
|
|
|
|
/* move flash to 0x50000000 */
|
|
ldr r2, =IXP425_EXP_CFG0
|
|
ldr r1, [r2]
|
|
bic r1, r1, #0x80000000
|
|
str r1, [r2]
|
|
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
|
|
/* invalidate I & Data TLB */
|
|
mcr p15, 0, r0, c8, c7, 0
|
|
CPWAIT r0
|
|
|
|
/* enable I cache */
|
|
mrc p15, 0, r0, c1, c0, 0
|
|
orr r0, r0, #MMU_Control_I
|
|
mcr p15, 0, r0, c1, c0, 0
|
|
CPWAIT r0
|
|
|
|
mrs r0,cpsr /* set the cpu to SVC32 mode */
|
|
bic r0,r0,#0x1f /* (superviser mode, M=10011) */
|
|
orr r0,r0,#0x13
|
|
msr cpsr,r0
|
|
|
|
#ifndef CONFIG_SKIP_RELOCATE_UBOOT
|
|
relocate: /* relocate U-Boot to RAM */
|
|
adr r0, _start /* r0 <- current position of code */
|
|
ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
|
|
cmp r0, r1 /* don't reloc during debug */
|
|
beq stack_setup
|
|
|
|
ldr r2, _armboot_start
|
|
ldr r3, _bss_start
|
|
sub r2, r3, r2 /* r2 <- size of armboot */
|
|
add r2, r0, r2 /* r2 <- source end address */
|
|
|
|
copy_loop:
|
|
ldmia r0!, {r3-r10} /* copy from source address [r0] */
|
|
stmia r1!, {r3-r10} /* copy to target address [r1] */
|
|
cmp r0, r2 /* until source end addreee [r2] */
|
|
ble copy_loop
|
|
#endif /* CONFIG_SKIP_RELOCATE_UBOOT */
|
|
|
|
/* Set up the stack */
|
|
stack_setup:
|
|
ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
|
|
sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
|
|
sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */
|
|
#ifdef CONFIG_USE_IRQ
|
|
sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
|
|
#endif
|
|
sub sp, r0, #12 /* leave 3 words for abort-stack */
|
|
|
|
clear_bss:
|
|
ldr r0, _bss_start /* find start of bss segment */
|
|
ldr r1, _bss_end /* stop here */
|
|
mov r2, #0x00000000 /* clear */
|
|
|
|
clbss_l:str r2, [r0] /* clear loop... */
|
|
add r0, r0, #4
|
|
cmp r0, r1
|
|
ble clbss_l
|
|
|
|
ldr pc, _start_armboot
|
|
|
|
_start_armboot: .word start_armboot
|
|
|
|
|
|
/****************************************************************************/
|
|
/* */
|
|
/* Interrupt handling */
|
|
/* */
|
|
/****************************************************************************/
|
|
|
|
/* IRQ stack frame */
|
|
|
|
#define S_FRAME_SIZE 72
|
|
|
|
#define S_OLD_R0 68
|
|
#define S_PSR 64
|
|
#define S_PC 60
|
|
#define S_LR 56
|
|
#define S_SP 52
|
|
|
|
#define S_IP 48
|
|
#define S_FP 44
|
|
#define S_R10 40
|
|
#define S_R9 36
|
|
#define S_R8 32
|
|
#define S_R7 28
|
|
#define S_R6 24
|
|
#define S_R5 20
|
|
#define S_R4 16
|
|
#define S_R3 12
|
|
#define S_R2 8
|
|
#define S_R1 4
|
|
#define S_R0 0
|
|
|
|
#define MODE_SVC 0x13
|
|
|
|
/* use bad_save_user_regs for abort/prefetch/undef/swi ... */
|
|
|
|
.macro bad_save_user_regs
|
|
sub sp, sp, #S_FRAME_SIZE
|
|
stmia sp, {r0 - r12} /* Calling r0-r12 */
|
|
add r8, sp, #S_PC
|
|
|
|
ldr r2, _armboot_start
|
|
sub r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
|
|
sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack
|
|
ldmia r2, {r2 - r4} /* get pc, cpsr, old_r0 */
|
|
add r0, sp, #S_FRAME_SIZE /* restore sp_SVC */
|
|
|
|
add r5, sp, #S_SP
|
|
mov r1, lr
|
|
stmia r5, {r0 - r4} /* save sp_SVC, lr_SVC, pc, cpsr, old_r */
|
|
mov r0, sp
|
|
.endm
|
|
|
|
|
|
/* use irq_save_user_regs / irq_restore_user_regs for */
|
|
/* IRQ/FIQ handling */
|
|
|
|
.macro irq_save_user_regs
|
|
sub sp, sp, #S_FRAME_SIZE
|
|
stmia sp, {r0 - r12} /* Calling r0-r12 */
|
|
add r8, sp, #S_PC
|
|
stmdb r8, {sp, lr}^ /* Calling SP, LR */
|
|
str lr, [r8, #0] /* Save calling PC */
|
|
mrs r6, spsr
|
|
str r6, [r8, #4] /* Save CPSR */
|
|
str r0, [r8, #8] /* Save OLD_R0 */
|
|
mov r0, sp
|
|
.endm
|
|
|
|
.macro irq_restore_user_regs
|
|
ldmia sp, {r0 - lr}^ @ Calling r0 - lr
|
|
mov r0, r0
|
|
ldr lr, [sp, #S_PC] @ Get PC
|
|
add sp, sp, #S_FRAME_SIZE
|
|
subs pc, lr, #4 @ return & move spsr_svc into cpsr
|
|
.endm
|
|
|
|
.macro get_bad_stack
|
|
ldr r13, _armboot_start @ setup our mode stack
|
|
sub r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
|
|
sub r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
|
|
|
|
str lr, [r13] @ save caller lr / spsr
|
|
mrs lr, spsr
|
|
str lr, [r13, #4]
|
|
|
|
mov r13, #MODE_SVC @ prepare SVC-Mode
|
|
msr spsr_c, r13
|
|
mov lr, pc
|
|
movs pc, lr
|
|
.endm
|
|
|
|
.macro get_irq_stack @ setup IRQ stack
|
|
ldr sp, IRQ_STACK_START
|
|
.endm
|
|
|
|
.macro get_fiq_stack @ setup FIQ stack
|
|
ldr sp, FIQ_STACK_START
|
|
.endm
|
|
|
|
|
|
/****************************************************************************/
|
|
/* */
|
|
/* exception handlers */
|
|
/* */
|
|
/****************************************************************************/
|
|
|
|
.align 5
|
|
undefined_instruction:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_undefined_instruction
|
|
|
|
.align 5
|
|
software_interrupt:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_software_interrupt
|
|
|
|
.align 5
|
|
prefetch_abort:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_prefetch_abort
|
|
|
|
.align 5
|
|
data_abort:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_data_abort
|
|
|
|
.align 5
|
|
not_used:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_not_used
|
|
|
|
#ifdef CONFIG_USE_IRQ
|
|
|
|
.align 5
|
|
irq:
|
|
get_irq_stack
|
|
irq_save_user_regs
|
|
bl do_irq
|
|
irq_restore_user_regs
|
|
|
|
.align 5
|
|
fiq:
|
|
get_fiq_stack
|
|
irq_save_user_regs /* someone ought to write a more */
|
|
bl do_fiq /* effiction fiq_save_user_regs */
|
|
irq_restore_user_regs
|
|
|
|
#else
|
|
|
|
.align 5
|
|
irq:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_irq
|
|
|
|
.align 5
|
|
fiq:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_fiq
|
|
|
|
#endif
|
|
|
|
/****************************************************************************/
|
|
/* */
|
|
/* Reset function: Use Watchdog to reset */
|
|
/* */
|
|
/****************************************************************************/
|
|
|
|
.align 5
|
|
.globl reset_cpu
|
|
|
|
reset_cpu:
|
|
ldr r1, =0x482e
|
|
ldr r2, =IXP425_OSWK
|
|
str r1, [r2]
|
|
ldr r1, =0x0fff
|
|
ldr r2, =IXP425_OSWT
|
|
str r1, [r2]
|
|
ldr r1, =0x5
|
|
ldr r2, =IXP425_OSWE
|
|
str r1, [r2]
|
|
b reset_endless
|
|
|
|
|
|
reset_endless:
|
|
|
|
b reset_endless
|
|
|
|
#ifdef CONFIG_USE_IRQ
|
|
|
|
.LC0: .word loops_per_jiffy
|
|
|
|
/*
|
|
* 0 <= r0 <= 2000
|
|
*/
|
|
.globl udelay
|
|
udelay:
|
|
mov r2, #0x6800
|
|
orr r2, r2, #0x00db
|
|
mul r0, r2, r0
|
|
ldr r2, .LC0
|
|
ldr r2, [r2] @ max = 0x0fffffff
|
|
mov r0, r0, lsr #11 @ max = 0x00003fff
|
|
mov r2, r2, lsr #11 @ max = 0x0003ffff
|
|
mul r0, r2, r0 @ max = 2^32-1
|
|
movs r0, r0, lsr #6
|
|
|
|
delay_loop:
|
|
subs r0, r0, #1
|
|
bne delay_loop
|
|
mov pc, lr
|
|
|
|
#endif /* CONFIG_USE_IRQ */
|