Lokesh Vutla e2924e5904 ARM: k2g: Configure reset mux to device reset ... BOOTCFG_RSTMUX8 register controls the reset mux associated with the ARM. Timer5(dedicated to ARM) when used as WatchDog timer, the events it generates are routed to the above mux. Following are the 3 events that can controlled bt the reset mux: - Device Reset - An interrupt to the ARM_GIC - An interrupt to the ARM_GIC followed by a device reset. Right now to give a default watchdog behaviour "Device reset" is being selected. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Nishanth Menon <nm@ti.com>		2016-06-02 21:42:19 -04:00
..
include/mach	ARM: k2g: Configure reset mux to device reset	2016-06-02 21:42:19 -04:00
clock.c	ARM: keystone2: K2G: Add support for different arm/device speeds	2016-03-14 19:18:44 -04:00
cmd_clock.c	ARM: keystone2: Use common definition for clk_get_rate	2015-08-12 20:47:55 -04:00
cmd_ddr3.c	ARM: keystone: move SoC sources to mach-keystone	2015-02-21 08:23:52 -05:00
cmd_mon.c	ARM: keystone2: Split monitor code / command code	2016-03-16 15:03:15 -04:00
cmd_poweroff.c	ARM: keystone2: Switch to using the poweroff command	2016-03-16 15:03:32 -04:00
config.mk	ARM: keystone2: Use dtb images by default	2015-10-22 14:22:11 -04:00
ddr3_spd.c	ARM: keystone2: use detected ddr3a size	2016-03-14 19:18:45 -04:00
ddr3.c	ARM: k2g: Add ddr3 info	2015-10-22 14:22:18 -04:00
init.c	ARM: keystone2: Add missing privilege ID settings	2016-04-01 17:17:40 -04:00
Kconfig	ARM: k2g: Add kconfig support	2015-10-22 14:22:13 -04:00
keystone.c	ARM: keystone2: Switch to using the poweroff command	2016-03-16 15:03:32 -04:00
Makefile	ARM: keystone2: Only link cmd_ddr3.o on non-SPL builds	2016-03-16 15:03:34 -04:00
mon.c	ARM: keystone2: Split monitor code / command code	2016-03-16 15:03:15 -04:00
msmc.c	ARM: keystone: move SoC sources to mach-keystone	2015-02-21 08:23:52 -05:00
psc.c	ARM: keystone2: psc: introduce function to hold and release module in reset.	2016-03-14 19:18:36 -04:00