mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-11 20:53:44 +09:00
c4d0e81156
The T2080QDS is a high-performance computing evaluation, development and
test platform supporting the T2080 QorIQ Power Architecture processor.
T2080QDS feature overview
Processor:
- T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz
Memory:
- Single memory controller capable of supporting DDR3 and DDR3-LV devices
- Two DDR3 DIMMs up to 4GB, Dual rank @ 2133MT/s and ECC support
Ethernet interfaces:
- Two 1Gbps RGMII on-board ports
- Four 10Gbps XFI on-board cages
- 1Gbps/2.5Gbps SGMII Riser card
- 10Gbps XAUI Riser card
Accelerator:
- DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC
SerDes:
- 16 lanes up to 10.3125GHz
- Supports Aurora debug, PEX, SATA, SGMII, sRIO, HiGig, XFI and XAUI
IFC:
- 128MB NOR Flash, 512MB NAND Flash, PromJet debug port and FPGA
eSPI:
- Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040)
USB:
- Two USB2.0 ports with internal PHY (one Type-A + one micro Type-AB)
PCIE:
- Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV)
SATA:
- Two SATA 2.0 ports on-board
SRIO:
- Two Serial RapidIO 2.0 ports up to 5 GHz
eSDHC:
- Supports SD/SDHC/SDXC/eMMC Card
I2C:
- Four I2C controllers.
UART:
- Dual 4-pins UART serial ports
System Logic:
- QIXIS-II FPGA system controll
Debug Features:
- Support Legacy, COP/JTAG, Aurora, Event and EVT
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[York Sun: removed Makefile blank line at EOF,
fix conflicts with moving DDR driver]
Acked-by: York Sun <yorksun@freescale.com>
48 lines
1.4 KiB
C
48 lines
1.4 KiB
C
/*
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __T2080QDS_QIXIS_H__
|
|
#define __T2080QDS_QIXIS_H__
|
|
|
|
/* Definitions of QIXIS Registers for T2080QDS */
|
|
|
|
#define QIXIS_SRDS1CLK_122 0x5a
|
|
#define QIXIS_SRDS1CLK_125 0x5e
|
|
|
|
|
|
/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */
|
|
#define BRDCFG4_EMISEL_MASK 0xE0
|
|
#define BRDCFG4_EMISEL_SHIFT 5
|
|
|
|
/* SYSCLK */
|
|
#define QIXIS_SYSCLK_66 0x0
|
|
#define QIXIS_SYSCLK_83 0x1
|
|
#define QIXIS_SYSCLK_100 0x2
|
|
#define QIXIS_SYSCLK_125 0x3
|
|
#define QIXIS_SYSCLK_133 0x4
|
|
#define QIXIS_SYSCLK_150 0x5
|
|
#define QIXIS_SYSCLK_160 0x6
|
|
#define QIXIS_SYSCLK_166 0x7
|
|
|
|
/* DDRCLK */
|
|
#define QIXIS_DDRCLK_66 0x0
|
|
#define QIXIS_DDRCLK_100 0x1
|
|
#define QIXIS_DDRCLK_125 0x2
|
|
#define QIXIS_DDRCLK_133 0x3
|
|
|
|
#define BRDCFG5_IRE 0x20 /* i2c Remote i2c1 enable */
|
|
|
|
#define BRDCFG12_SD3EN_MASK 0x20
|
|
#define BRDCFG12_SD3MX_MASK 0x08
|
|
#define BRDCFG12_SD3MX_SLOT5 0x08
|
|
#define BRDCFG12_SD3MX_SLOT6 0x00
|
|
#define BRDCFG12_SD4EN_MASK 0x04
|
|
#define BRDCFG12_SD4MX_MASK 0x03
|
|
#define BRDCFG12_SD4MX_SLOT7 0x02
|
|
#define BRDCFG12_SD4MX_SLOT8 0x01
|
|
#define BRDCFG12_SD4MX_AURO_SATA 0x00
|
|
#endif
|