mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 17:38:51 +09:00
![Paul Kocialkowski](/assets/img/avatar_default.png)
There is no distinction between essential and non-essential mux configuration, so it doesn't make sense to have an "essential" prefix. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
341 lines
8.7 KiB
C
341 lines
8.7 KiB
C
/*
|
|
* (C) Copyright 2010
|
|
* Texas Instruments Incorporated, <www.ti.com>
|
|
* Steve Sakoman <steve@sakoman.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <common.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/mmc_host_def.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/gpio.h>
|
|
#include <twl6030.h>
|
|
|
|
#include "panda_mux_data.h"
|
|
|
|
#ifdef CONFIG_USB_EHCI
|
|
#include <usb.h>
|
|
#include <asm/arch/ehci.h>
|
|
#include <asm/ehci-omap.h>
|
|
#endif
|
|
|
|
#define PANDA_ULPI_PHY_TYPE_GPIO 182
|
|
#define PANDA_BOARD_ID_1_GPIO 101
|
|
#define PANDA_ES_BOARD_ID_1_GPIO 48
|
|
#define PANDA_BOARD_ID_2_GPIO 171
|
|
#define PANDA_ES_BOARD_ID_3_GPIO 3
|
|
#define PANDA_ES_BOARD_ID_4_GPIO 2
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
const struct omap_sysinfo sysinfo = {
|
|
"Board: OMAP4 Panda\n"
|
|
};
|
|
|
|
struct omap4_scrm_regs *const scrm = (struct omap4_scrm_regs *)0x4a30a000;
|
|
|
|
/**
|
|
* @brief board_init
|
|
*
|
|
* @return 0
|
|
*/
|
|
int board_init(void)
|
|
{
|
|
gpmc_init();
|
|
|
|
gd->bd->bi_arch_number = MACH_TYPE_OMAP4_PANDA;
|
|
gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Routine: get_board_revision
|
|
* Description: Detect if we are running on a panda revision A1-A6,
|
|
* or an ES panda board. This can be done by reading
|
|
* the level of GPIOs and checking the processor revisions.
|
|
* This should result in:
|
|
* Panda 4430:
|
|
* GPIO171, GPIO101, GPIO182: 0 1 1 => A1-A5
|
|
* GPIO171, GPIO101, GPIO182: 1 0 1 => A6
|
|
* Panda ES:
|
|
* GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 0 1 1 => B1/B2
|
|
* GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 1 1 1 => B3
|
|
*/
|
|
int get_board_revision(void)
|
|
{
|
|
int board_id0, board_id1, board_id2;
|
|
int board_id3, board_id4;
|
|
int board_id;
|
|
|
|
int processor_rev = omap_revision();
|
|
|
|
/* Setup the mux for the common board ID pins (gpio 171 and 182) */
|
|
writew((IEN | M3), (*ctrl)->control_padconf_core_base + UNIPRO_TX0);
|
|
writew((IEN | M3), (*ctrl)->control_padconf_core_base + FREF_CLK2_OUT);
|
|
|
|
board_id0 = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO);
|
|
board_id2 = gpio_get_value(PANDA_BOARD_ID_2_GPIO);
|
|
|
|
if ((processor_rev >= OMAP4460_ES1_0 &&
|
|
processor_rev <= OMAP4460_ES1_1)) {
|
|
/*
|
|
* Setup the mux for the ES specific board ID pins (gpio 101,
|
|
* 2 and 3.
|
|
*/
|
|
writew((IEN | M3), (*ctrl)->control_padconf_core_base +
|
|
GPMC_A24);
|
|
writew((IEN | M3), (*ctrl)->control_padconf_core_base +
|
|
UNIPRO_RY0);
|
|
writew((IEN | M3), (*ctrl)->control_padconf_core_base +
|
|
UNIPRO_RX1);
|
|
|
|
board_id1 = gpio_get_value(PANDA_ES_BOARD_ID_1_GPIO);
|
|
board_id3 = gpio_get_value(PANDA_ES_BOARD_ID_3_GPIO);
|
|
board_id4 = gpio_get_value(PANDA_ES_BOARD_ID_4_GPIO);
|
|
|
|
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
|
setenv("board_name", "panda-es");
|
|
#endif
|
|
board_id = ((board_id4 << 4) | (board_id3 << 3) |
|
|
(board_id2 << 2) | (board_id1 << 1) | (board_id0));
|
|
} else {
|
|
/* Setup the mux for the Ax specific board ID pins (gpio 101) */
|
|
writew((IEN | M3), (*ctrl)->control_padconf_core_base +
|
|
FREF_CLK2_OUT);
|
|
|
|
board_id1 = gpio_get_value(PANDA_BOARD_ID_1_GPIO);
|
|
board_id = ((board_id2 << 2) | (board_id1 << 1) | (board_id0));
|
|
|
|
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
|
if ((board_id >= 0x3) && (processor_rev == OMAP4430_ES2_3))
|
|
setenv("board_name", "panda-a4");
|
|
#endif
|
|
}
|
|
|
|
return board_id;
|
|
}
|
|
|
|
/**
|
|
* is_panda_es_rev_b3() - Detect if we are running on rev B3 of panda board ES
|
|
*
|
|
*
|
|
* Detect if we are running on B3 version of ES panda board,
|
|
* This can be done by reading the level of GPIO 171 and checking the
|
|
* processor revisions.
|
|
* GPIO171: 1 => Panda ES Rev B3
|
|
*
|
|
* Return : return 1 if Panda ES Rev B3 , else return 0
|
|
*/
|
|
u8 is_panda_es_rev_b3(void)
|
|
{
|
|
int processor_rev = omap_revision();
|
|
int ret = 0;
|
|
|
|
if ((processor_rev >= OMAP4460_ES1_0 &&
|
|
processor_rev <= OMAP4460_ES1_1)) {
|
|
|
|
/* Setup the mux for the common board ID pins (gpio 171) */
|
|
writew((IEN | M3),
|
|
(*ctrl)->control_padconf_core_base + UNIPRO_TX0);
|
|
|
|
/* if processor_rev is panda ES and GPIO171 is 1,it is rev b3 */
|
|
ret = gpio_get_value(PANDA_BOARD_ID_2_GPIO);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
|
|
/*
|
|
* emif_get_reg_dump() - emif_get_reg_dump strong function
|
|
*
|
|
* @emif_nr - emif base
|
|
* @regs - reg dump of timing values
|
|
*
|
|
* Strong function to override emif_get_reg_dump weak function in sdram_elpida.c
|
|
*/
|
|
void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
|
|
{
|
|
u32 omap4_rev = omap_revision();
|
|
|
|
/* Same devices and geometry on both EMIFs */
|
|
if (omap4_rev == OMAP4430_ES1_0)
|
|
*regs = &emif_regs_elpida_380_mhz_1cs;
|
|
else if (omap4_rev == OMAP4430_ES2_0)
|
|
*regs = &emif_regs_elpida_200_mhz_2cs;
|
|
else if (omap4_rev == OMAP4430_ES2_3)
|
|
*regs = &emif_regs_elpida_400_mhz_1cs;
|
|
else if (omap4_rev < OMAP4470_ES1_0) {
|
|
if(is_panda_es_rev_b3())
|
|
*regs = &emif_regs_elpida_400_mhz_1cs;
|
|
else
|
|
*regs = &emif_regs_elpida_400_mhz_2cs;
|
|
}
|
|
else
|
|
*regs = &emif_regs_elpida_400_mhz_1cs;
|
|
}
|
|
|
|
void emif_get_dmm_regs(const struct dmm_lisa_map_regs
|
|
**dmm_lisa_regs)
|
|
{
|
|
u32 omap_rev = omap_revision();
|
|
|
|
if (omap_rev == OMAP4430_ES1_0)
|
|
*dmm_lisa_regs = &lisa_map_2G_x_1_x_2;
|
|
else if (omap_rev == OMAP4430_ES2_3)
|
|
*dmm_lisa_regs = &lisa_map_2G_x_2_x_2;
|
|
else if (omap_rev < OMAP4460_ES1_0)
|
|
*dmm_lisa_regs = &lisa_map_2G_x_2_x_2;
|
|
else
|
|
*dmm_lisa_regs = &ma_lisa_map_2G_x_2_x_2;
|
|
}
|
|
|
|
#endif
|
|
|
|
/**
|
|
* @brief misc_init_r - Configure Panda board specific configurations
|
|
* such as power configurations, ethernet initialization as phase2 of
|
|
* boot sequence
|
|
*
|
|
* @return 0
|
|
*/
|
|
int misc_init_r(void)
|
|
{
|
|
int phy_type;
|
|
u32 auxclk, altclksrc;
|
|
|
|
/* EHCI is not supported on ES1.0 */
|
|
if (omap_revision() == OMAP4430_ES1_0)
|
|
return 0;
|
|
|
|
get_board_revision();
|
|
|
|
gpio_direction_input(PANDA_ULPI_PHY_TYPE_GPIO);
|
|
phy_type = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO);
|
|
|
|
if (phy_type == 1) {
|
|
/* ULPI PHY supplied by auxclk3 derived from sys_clk */
|
|
debug("ULPI PHY supplied by auxclk3\n");
|
|
|
|
auxclk = readl(&scrm->auxclk3);
|
|
/* Select sys_clk */
|
|
auxclk &= ~AUXCLK_SRCSELECT_MASK;
|
|
auxclk |= AUXCLK_SRCSELECT_SYS_CLK << AUXCLK_SRCSELECT_SHIFT;
|
|
/* Set the divisor to 2 */
|
|
auxclk &= ~AUXCLK_CLKDIV_MASK;
|
|
auxclk |= AUXCLK_CLKDIV_2 << AUXCLK_CLKDIV_SHIFT;
|
|
/* Request auxilary clock #3 */
|
|
auxclk |= AUXCLK_ENABLE_MASK;
|
|
|
|
writel(auxclk, &scrm->auxclk3);
|
|
} else {
|
|
/* ULPI PHY supplied by auxclk1 derived from PER dpll */
|
|
debug("ULPI PHY supplied by auxclk1\n");
|
|
|
|
auxclk = readl(&scrm->auxclk1);
|
|
/* Select per DPLL */
|
|
auxclk &= ~AUXCLK_SRCSELECT_MASK;
|
|
auxclk |= AUXCLK_SRCSELECT_PER_DPLL << AUXCLK_SRCSELECT_SHIFT;
|
|
/* Set the divisor to 16 */
|
|
auxclk &= ~AUXCLK_CLKDIV_MASK;
|
|
auxclk |= AUXCLK_CLKDIV_16 << AUXCLK_CLKDIV_SHIFT;
|
|
/* Request auxilary clock #3 */
|
|
auxclk |= AUXCLK_ENABLE_MASK;
|
|
|
|
writel(auxclk, &scrm->auxclk1);
|
|
}
|
|
|
|
altclksrc = readl(&scrm->altclksrc);
|
|
|
|
/* Activate alternate system clock supplier */
|
|
altclksrc &= ~ALTCLKSRC_MODE_MASK;
|
|
altclksrc |= ALTCLKSRC_MODE_ACTIVE;
|
|
|
|
/* enable clocks */
|
|
altclksrc |= ALTCLKSRC_ENABLE_INT_MASK | ALTCLKSRC_ENABLE_EXT_MASK;
|
|
|
|
writel(altclksrc, &scrm->altclksrc);
|
|
|
|
omap_die_id_usbethaddr();
|
|
|
|
return 0;
|
|
}
|
|
|
|
void set_muxconf_regs(void)
|
|
{
|
|
do_set_mux((*ctrl)->control_padconf_core_base,
|
|
core_padconf_array_essential,
|
|
sizeof(core_padconf_array_essential) /
|
|
sizeof(struct pad_conf_entry));
|
|
|
|
do_set_mux((*ctrl)->control_padconf_wkup_base,
|
|
wkup_padconf_array_essential,
|
|
sizeof(wkup_padconf_array_essential) /
|
|
sizeof(struct pad_conf_entry));
|
|
|
|
if (omap_revision() >= OMAP4460_ES1_0)
|
|
do_set_mux((*ctrl)->control_padconf_wkup_base,
|
|
wkup_padconf_array_essential_4460,
|
|
sizeof(wkup_padconf_array_essential_4460) /
|
|
sizeof(struct pad_conf_entry));
|
|
}
|
|
|
|
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
return omap_mmc_init(0, 0, 0, -1, -1);
|
|
}
|
|
|
|
void board_mmc_power_init(void)
|
|
{
|
|
twl6030_power_mmc_init(0);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_EHCI
|
|
|
|
static struct omap_usbhs_board_data usbhs_bdata = {
|
|
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
|
|
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
|
|
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
|
|
};
|
|
|
|
int ehci_hcd_init(int index, enum usb_init_type init,
|
|
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
|
|
{
|
|
int ret;
|
|
unsigned int utmi_clk;
|
|
|
|
/* Now we can enable our port clocks */
|
|
utmi_clk = readl((void *)CM_L3INIT_HSUSBHOST_CLKCTRL);
|
|
utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK;
|
|
setbits_le32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, utmi_clk);
|
|
|
|
ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ehci_hcd_stop(int index)
|
|
{
|
|
return omap_ehci_hcd_stop();
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* get_board_rev() - get board revision
|
|
*/
|
|
u32 get_board_rev(void)
|
|
{
|
|
return 0x20;
|
|
}
|