mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-28 21:09:00 +09:00
![Neil Armstrong](/assets/img/avatar_default.png)
This adds support for the USB PHYs found in the Amlogic G12A SoC Family. The USB2 PHY supports Host and/or Peripheral mode, depending on it's position. The first PHY is only used as Host, but the second supports Dual modes defined by the USB Control Glue HW in front of the USB Controllers. The second driver supports USB3 Host mode or PCIE 2.0 mode, depending on the layout of the board. Selection is done by the #phy-cells, making the mode static and exclusive. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
217 lines
4.9 KiB
C
217 lines
4.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Meson G12A USB2 PHY driver
|
|
*
|
|
* Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
|
|
* Copyright (C) 2019 BayLibre, SAS
|
|
* Author: Neil Armstrong <narmstron@baylibre.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <bitfield.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <generic-phy.h>
|
|
#include <regmap.h>
|
|
#include <power/regulator.h>
|
|
#include <reset.h>
|
|
#include <clk.h>
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/compat.h>
|
|
|
|
#define PHY_CTRL_R0 0x0
|
|
#define PHY_CTRL_R1 0x4
|
|
#define PHY_CTRL_R2 0x8
|
|
#define PHY_CTRL_R3 0xc
|
|
#define PHY_CTRL_R4 0x10
|
|
#define PHY_CTRL_R5 0x14
|
|
#define PHY_CTRL_R6 0x18
|
|
#define PHY_CTRL_R7 0x1c
|
|
#define PHY_CTRL_R8 0x20
|
|
#define PHY_CTRL_R9 0x24
|
|
#define PHY_CTRL_R10 0x28
|
|
#define PHY_CTRL_R11 0x2c
|
|
#define PHY_CTRL_R12 0x30
|
|
#define PHY_CTRL_R13 0x34
|
|
#define PHY_CTRL_R14 0x38
|
|
#define PHY_CTRL_R15 0x3c
|
|
#define PHY_CTRL_R16 0x40
|
|
#define PHY_CTRL_R17 0x44
|
|
#define PHY_CTRL_R18 0x48
|
|
#define PHY_CTRL_R19 0x4c
|
|
#define PHY_CTRL_R20 0x50
|
|
#define PHY_CTRL_R21 0x54
|
|
#define PHY_CTRL_R22 0x58
|
|
#define PHY_CTRL_R23 0x5c
|
|
|
|
#define RESET_COMPLETE_TIME 1000
|
|
#define PLL_RESET_COMPLETE_TIME 100
|
|
|
|
struct phy_meson_g12a_usb2_priv {
|
|
struct regmap *regmap;
|
|
#if CONFIG_IS_ENABLED(DM_REGULATOR)
|
|
struct udevice *phy_supply;
|
|
#endif
|
|
#if CONFIG_IS_ENABLED(CLK)
|
|
struct clk clk;
|
|
#endif
|
|
struct reset_ctl reset;
|
|
};
|
|
|
|
|
|
static int phy_meson_g12a_usb2_power_on(struct phy *phy)
|
|
{
|
|
struct udevice *dev = phy->dev;
|
|
struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
|
|
|
|
#if CONFIG_IS_ENABLED(DM_REGULATOR)
|
|
if (priv->phy_supply) {
|
|
int ret = regulator_set_enable(priv->phy_supply, true);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int phy_meson_g12a_usb2_power_off(struct phy *phy)
|
|
{
|
|
struct udevice *dev = phy->dev;
|
|
struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
|
|
|
|
#if CONFIG_IS_ENABLED(DM_REGULATOR)
|
|
if (priv->phy_supply) {
|
|
int ret = regulator_set_enable(priv->phy_supply, false);
|
|
if (ret) {
|
|
pr_err("Error disabling PHY supply\n");
|
|
return ret;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int phy_meson_g12a_usb2_init(struct phy *phy)
|
|
{
|
|
struct udevice *dev = phy->dev;
|
|
struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
ret = reset_assert(&priv->reset);
|
|
udelay(1);
|
|
ret |= reset_deassert(&priv->reset);
|
|
if (ret)
|
|
return ret;
|
|
|
|
udelay(RESET_COMPLETE_TIME);
|
|
|
|
/* usb2_otg_aca_en == 0 */
|
|
regmap_update_bits(priv->regmap, PHY_CTRL_R21, BIT(2), 0);
|
|
|
|
/* PLL Setup : 24MHz * 20 / 1 = 480MHz */
|
|
regmap_write(priv->regmap, PHY_CTRL_R16, 0x39400414);
|
|
regmap_write(priv->regmap, PHY_CTRL_R17, 0x927e0000);
|
|
regmap_write(priv->regmap, PHY_CTRL_R18, 0xac5f49e5);
|
|
|
|
udelay(PLL_RESET_COMPLETE_TIME);
|
|
|
|
/* UnReset PLL */
|
|
regmap_write(priv->regmap, PHY_CTRL_R16, 0x19400414);
|
|
|
|
/* PHY Tuning */
|
|
regmap_write(priv->regmap, PHY_CTRL_R20, 0xfe18);
|
|
regmap_write(priv->regmap, PHY_CTRL_R4, 0x8000fff);
|
|
|
|
/* Tuning Disconnect Threshold */
|
|
regmap_write(priv->regmap, PHY_CTRL_R3, 0x34);
|
|
|
|
/* Analog Settings */
|
|
regmap_write(priv->regmap, PHY_CTRL_R14, 0);
|
|
regmap_write(priv->regmap, PHY_CTRL_R13, 0x78000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int phy_meson_g12a_usb2_exit(struct phy *phy)
|
|
{
|
|
struct udevice *dev = phy->dev;
|
|
struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
ret = reset_assert(&priv->reset);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct phy_ops meson_g12a_usb2_phy_ops = {
|
|
.init = phy_meson_g12a_usb2_init,
|
|
.exit = phy_meson_g12a_usb2_exit,
|
|
.power_on = phy_meson_g12a_usb2_power_on,
|
|
.power_off = phy_meson_g12a_usb2_power_off,
|
|
};
|
|
|
|
int meson_g12a_usb2_phy_probe(struct udevice *dev)
|
|
{
|
|
struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = reset_get_by_index(dev, 0, &priv->reset);
|
|
if (ret == -ENOTSUPP)
|
|
return 0;
|
|
else if (ret)
|
|
return ret;
|
|
|
|
ret = reset_deassert(&priv->reset);
|
|
if (ret) {
|
|
reset_release_all(&priv->reset, 1);
|
|
return ret;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(CLK)
|
|
ret = clk_get_by_index(dev, 0, &priv->clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_enable(&priv->clk);
|
|
if (ret && ret != -ENOSYS && ret != -ENOTSUPP) {
|
|
pr_err("failed to enable PHY clock\n");
|
|
clk_free(&priv->clk);
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(DM_REGULATOR)
|
|
ret = device_get_supply_regulator(dev, "phy-supply", &priv->phy_supply);
|
|
if (ret && ret != -ENOENT) {
|
|
pr_err("Failed to get PHY regulator\n");
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id meson_g12a_usb2_phy_ids[] = {
|
|
{ .compatible = "amlogic,g12a-usb2-phy" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(meson_g12a_usb2_phy) = {
|
|
.name = "meson_g12a_usb2_phy",
|
|
.id = UCLASS_PHY,
|
|
.of_match = meson_g12a_usb2_phy_ids,
|
|
.probe = meson_g12a_usb2_phy_probe,
|
|
.ops = &meson_g12a_usb2_phy_ops,
|
|
.priv_auto_alloc_size = sizeof(struct phy_meson_g12a_usb2_priv),
|
|
};
|