mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-17 23:48:52 +09:00
![Simon Glass](/assets/img/avatar_default.png)
These support the flat device tree. We want to use the dev_read_..() prefix for functions that support both flat tree and live tree. So rename the existing functions to avoid confusion. In the end we will have: 1. dev_read_addr...() - works on devices, supports flat/live tree 2. devfdt_get_addr...() - current functions, flat tree only 3. of_get_address() etc. - new functions, live tree only All drivers will be written to use 1. That function will in turn call either 2 or 3 depending on whether the flat or live tree is in use. Note this involves changing some dead code - the imx_lpi2c.c file. Signed-off-by: Simon Glass <sjg@chromium.org>
358 lines
8.0 KiB
C
358 lines
8.0 KiB
C
/*
|
|
* Copyright (C) 2012-2020 ASPEED Technology Inc.
|
|
* Copyright 2016 IBM Corporation
|
|
* Copyright 2017 Google, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <fdtdec.h>
|
|
#include <i2c.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/scu_ast2500.h>
|
|
|
|
#include "ast_i2c.h"
|
|
|
|
#define I2C_TIMEOUT_US 100000
|
|
#define I2C_SLEEP_STEP_US 20
|
|
|
|
#define HIGHSPEED_TTIMEOUT 3
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* Device private data
|
|
*/
|
|
struct ast_i2c_priv {
|
|
/* This device's clock */
|
|
struct clk clk;
|
|
/* Device registers */
|
|
struct ast_i2c_regs *regs;
|
|
/* I2C speed in Hz */
|
|
int speed;
|
|
};
|
|
|
|
/*
|
|
* Given desired divider ratio, return the value that needs to be set
|
|
* in Clock and AC Timing Control register
|
|
*/
|
|
static u32 get_clk_reg_val(ulong divider_ratio)
|
|
{
|
|
ulong inc = 0, div;
|
|
ulong scl_low, scl_high, data;
|
|
|
|
for (div = 0; divider_ratio >= 16; div++) {
|
|
inc |= (divider_ratio & 1);
|
|
divider_ratio >>= 1;
|
|
}
|
|
divider_ratio += inc;
|
|
scl_low = (divider_ratio >> 1) - 1;
|
|
scl_high = divider_ratio - scl_low - 2;
|
|
data = I2CD_CACTC_BASE
|
|
| (scl_high << I2CD_TCKHIGH_SHIFT)
|
|
| (scl_low << I2CD_TCKLOW_SHIFT)
|
|
| (div << I2CD_BASE_DIV_SHIFT);
|
|
|
|
return data;
|
|
}
|
|
|
|
static void ast_i2c_clear_interrupts(struct udevice *dev)
|
|
{
|
|
struct ast_i2c_priv *priv = dev_get_priv(dev);
|
|
|
|
writel(~0, &priv->regs->isr);
|
|
}
|
|
|
|
static void ast_i2c_init_bus(struct udevice *dev)
|
|
{
|
|
struct ast_i2c_priv *priv = dev_get_priv(dev);
|
|
|
|
/* Reset device */
|
|
writel(0, &priv->regs->fcr);
|
|
/* Enable Master Mode. Assuming single-master */
|
|
writel(I2CD_MASTER_EN
|
|
| I2CD_M_SDA_LOCK_EN
|
|
| I2CD_MULTI_MASTER_DIS | I2CD_M_SCL_DRIVE_EN,
|
|
&priv->regs->fcr);
|
|
/* Enable Interrupts */
|
|
writel(I2CD_INTR_TX_ACK
|
|
| I2CD_INTR_TX_NAK
|
|
| I2CD_INTR_RX_DONE
|
|
| I2CD_INTR_BUS_RECOVER_DONE
|
|
| I2CD_INTR_NORMAL_STOP
|
|
| I2CD_INTR_ABNORMAL, &priv->regs->icr);
|
|
}
|
|
|
|
static int ast_i2c_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct ast_i2c_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
priv->regs = devfdt_get_addr_ptr(dev);
|
|
if (IS_ERR(priv->regs))
|
|
return PTR_ERR(priv->regs);
|
|
|
|
ret = clk_get_by_index(dev, 0, &priv->clk);
|
|
if (ret < 0) {
|
|
debug("%s: Can't get clock for %s: %d\n", __func__, dev->name,
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ast_i2c_probe(struct udevice *dev)
|
|
{
|
|
struct ast2500_scu *scu;
|
|
|
|
debug("Enabling I2C%u\n", dev->seq);
|
|
|
|
/*
|
|
* Get all I2C devices out of Reset.
|
|
* Only needs to be done once, but doing it for every
|
|
* device does not hurt.
|
|
*/
|
|
scu = ast_get_scu();
|
|
ast_scu_unlock(scu);
|
|
clrbits_le32(&scu->sysreset_ctrl1, SCU_SYSRESET_I2C);
|
|
ast_scu_lock(scu);
|
|
|
|
ast_i2c_init_bus(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ast_i2c_wait_isr(struct udevice *dev, u32 flag)
|
|
{
|
|
struct ast_i2c_priv *priv = dev_get_priv(dev);
|
|
int timeout = I2C_TIMEOUT_US;
|
|
|
|
while (!(readl(&priv->regs->isr) & flag) && timeout > 0) {
|
|
udelay(I2C_SLEEP_STEP_US);
|
|
timeout -= I2C_SLEEP_STEP_US;
|
|
}
|
|
|
|
ast_i2c_clear_interrupts(dev);
|
|
if (timeout <= 0)
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ast_i2c_send_stop(struct udevice *dev)
|
|
{
|
|
struct ast_i2c_priv *priv = dev_get_priv(dev);
|
|
|
|
writel(I2CD_M_STOP_CMD, &priv->regs->csr);
|
|
|
|
return ast_i2c_wait_isr(dev, I2CD_INTR_NORMAL_STOP);
|
|
}
|
|
|
|
static int ast_i2c_wait_tx(struct udevice *dev)
|
|
{
|
|
struct ast_i2c_priv *priv = dev_get_priv(dev);
|
|
int timeout = I2C_TIMEOUT_US;
|
|
u32 flag = I2CD_INTR_TX_ACK | I2CD_INTR_TX_NAK;
|
|
u32 status = readl(&priv->regs->isr) & flag;
|
|
int ret = 0;
|
|
|
|
while (!status && timeout > 0) {
|
|
status = readl(&priv->regs->isr) & flag;
|
|
udelay(I2C_SLEEP_STEP_US);
|
|
timeout -= I2C_SLEEP_STEP_US;
|
|
}
|
|
|
|
if (status == I2CD_INTR_TX_NAK)
|
|
ret = -EREMOTEIO;
|
|
|
|
if (timeout <= 0)
|
|
ret = -ETIMEDOUT;
|
|
|
|
ast_i2c_clear_interrupts(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ast_i2c_start_txn(struct udevice *dev, uint devaddr)
|
|
{
|
|
struct ast_i2c_priv *priv = dev_get_priv(dev);
|
|
|
|
/* Start and Send Device Address */
|
|
writel(devaddr, &priv->regs->trbbr);
|
|
writel(I2CD_M_START_CMD | I2CD_M_TX_CMD, &priv->regs->csr);
|
|
|
|
return ast_i2c_wait_tx(dev);
|
|
}
|
|
|
|
static int ast_i2c_read_data(struct udevice *dev, u8 chip_addr, u8 *buffer,
|
|
size_t len, bool send_stop)
|
|
{
|
|
struct ast_i2c_priv *priv = dev_get_priv(dev);
|
|
u32 i2c_cmd = I2CD_M_RX_CMD;
|
|
int ret;
|
|
|
|
ret = ast_i2c_start_txn(dev, (chip_addr << 1) | I2C_M_RD);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
for (; len > 0; len--, buffer++) {
|
|
if (len == 1)
|
|
i2c_cmd |= I2CD_M_S_RX_CMD_LAST;
|
|
writel(i2c_cmd, &priv->regs->csr);
|
|
ret = ast_i2c_wait_isr(dev, I2CD_INTR_RX_DONE);
|
|
if (ret < 0)
|
|
return ret;
|
|
*buffer = (readl(&priv->regs->trbbr) & I2CD_RX_DATA_MASK)
|
|
>> I2CD_RX_DATA_SHIFT;
|
|
}
|
|
ast_i2c_clear_interrupts(dev);
|
|
|
|
if (send_stop)
|
|
return ast_i2c_send_stop(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ast_i2c_write_data(struct udevice *dev, u8 chip_addr, u8
|
|
*buffer, size_t len, bool send_stop)
|
|
{
|
|
struct ast_i2c_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
ret = ast_i2c_start_txn(dev, (chip_addr << 1));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
for (; len > 0; len--, buffer++) {
|
|
writel(*buffer, &priv->regs->trbbr);
|
|
writel(I2CD_M_TX_CMD, &priv->regs->csr);
|
|
ret = ast_i2c_wait_tx(dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
if (send_stop)
|
|
return ast_i2c_send_stop(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ast_i2c_deblock(struct udevice *dev)
|
|
{
|
|
struct ast_i2c_priv *priv = dev_get_priv(dev);
|
|
struct ast_i2c_regs *regs = priv->regs;
|
|
u32 csr = readl(®s->csr);
|
|
bool sda_high = csr & I2CD_SDA_LINE_STS;
|
|
bool scl_high = csr & I2CD_SCL_LINE_STS;
|
|
int ret = 0;
|
|
|
|
if (sda_high && scl_high) {
|
|
/* Bus is idle, no deblocking needed. */
|
|
return 0;
|
|
} else if (sda_high) {
|
|
/* Send stop command */
|
|
debug("Unterminated TXN in (%x), sending stop\n", csr);
|
|
ret = ast_i2c_send_stop(dev);
|
|
} else if (scl_high) {
|
|
/* Possibly stuck slave */
|
|
debug("Bus stuck (%x), attempting recovery\n", csr);
|
|
writel(I2CD_BUS_RECOVER_CMD, ®s->csr);
|
|
ret = ast_i2c_wait_isr(dev, I2CD_INTR_BUS_RECOVER_DONE);
|
|
} else {
|
|
/* Just try to reinit the device. */
|
|
ast_i2c_init_bus(dev);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ast_i2c_xfer(struct udevice *dev, struct i2c_msg *msg, int nmsgs)
|
|
{
|
|
int ret;
|
|
|
|
ret = ast_i2c_deblock(dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
debug("i2c_xfer: %d messages\n", nmsgs);
|
|
for (; nmsgs > 0; nmsgs--, msg++) {
|
|
if (msg->flags & I2C_M_RD) {
|
|
debug("i2c_read: chip=0x%x, len=0x%x, flags=0x%x\n",
|
|
msg->addr, msg->len, msg->flags);
|
|
ret = ast_i2c_read_data(dev, msg->addr, msg->buf,
|
|
msg->len, (nmsgs == 1));
|
|
} else {
|
|
debug("i2c_write: chip=0x%x, len=0x%x, flags=0x%x\n",
|
|
msg->addr, msg->len, msg->flags);
|
|
ret = ast_i2c_write_data(dev, msg->addr, msg->buf,
|
|
msg->len, (nmsgs == 1));
|
|
}
|
|
if (ret) {
|
|
debug("%s: error (%d)\n", __func__, ret);
|
|
return -EREMOTEIO;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ast_i2c_set_speed(struct udevice *dev, unsigned int speed)
|
|
{
|
|
struct ast_i2c_priv *priv = dev_get_priv(dev);
|
|
struct ast_i2c_regs *regs = priv->regs;
|
|
ulong i2c_rate, divider;
|
|
|
|
debug("Setting speed for I2C%d to <%u>\n", dev->seq, speed);
|
|
if (!speed) {
|
|
debug("No valid speed specified\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
i2c_rate = clk_get_rate(&priv->clk);
|
|
divider = i2c_rate / speed;
|
|
|
|
priv->speed = speed;
|
|
if (speed > I2C_HIGHSPEED_RATE) {
|
|
debug("Enable High Speed\n");
|
|
setbits_le32(®s->fcr, I2CD_M_HIGH_SPEED_EN
|
|
| I2CD_M_SDA_DRIVE_1T_EN
|
|
| I2CD_SDA_DRIVE_1T_EN);
|
|
writel(HIGHSPEED_TTIMEOUT, ®s->cactcr2);
|
|
} else {
|
|
debug("Enabling Normal Speed\n");
|
|
writel(I2CD_NO_TIMEOUT_CTRL, ®s->cactcr2);
|
|
}
|
|
|
|
writel(get_clk_reg_val(divider), ®s->cactcr1);
|
|
ast_i2c_clear_interrupts(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_i2c_ops ast_i2c_ops = {
|
|
.xfer = ast_i2c_xfer,
|
|
.set_bus_speed = ast_i2c_set_speed,
|
|
.deblock = ast_i2c_deblock,
|
|
};
|
|
|
|
static const struct udevice_id ast_i2c_ids[] = {
|
|
{ .compatible = "aspeed,ast2400-i2c-bus" },
|
|
{ .compatible = "aspeed,ast2500-i2c-bus" },
|
|
{ },
|
|
};
|
|
|
|
U_BOOT_DRIVER(ast_i2c) = {
|
|
.name = "ast_i2c",
|
|
.id = UCLASS_I2C,
|
|
.of_match = ast_i2c_ids,
|
|
.probe = ast_i2c_probe,
|
|
.ofdata_to_platdata = ast_i2c_ofdata_to_platdata,
|
|
.priv_auto_alloc_size = sizeof(struct ast_i2c_priv),
|
|
.ops = &ast_i2c_ops,
|
|
};
|