mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 08:58:52 +09:00
![Kyungmin Park](/assets/img/avatar_default.png)
This patch enables the OneNAND boot within U-Boot. Before this work, we used another OneNAND IPL called X-Loader based on open source. With this work, we can build the oneboot.bin image without other program. The build sequence is simple. First, it compiles the u-boot.bin Second, it compiles OneNAND IPL Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin The mechanism is similar with NAND boot except it boots from itself. Another thing is that you can only use the OneNAND IPL only to work other bootloader such as RedBoot and so on. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
474 lines
16 KiB
C
474 lines
16 KiB
C
/*
|
|
* (C) Copyright 2005-2007
|
|
* Samsung Electronics.
|
|
* Kyungmin Park <kyungmin.park@samsung.com>
|
|
*
|
|
* Derived from omap2420
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
#include <common.h>
|
|
#include <asm/arch/omap2420.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/bits.h>
|
|
#include <asm/arch/mux.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/sys_info.h>
|
|
#include <asm/arch/mem.h>
|
|
#include <asm/mach-types.h>
|
|
|
|
void wait_for_command_complete(unsigned int wd_base);
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define write_config_reg(reg, value) \
|
|
do { \
|
|
writeb(value, reg); \
|
|
} while (0)
|
|
|
|
#define mask_config_reg(reg, mask) \
|
|
do { \
|
|
char value = readb(reg) & ~(mask); \
|
|
writeb(value, reg); \
|
|
} while (0)
|
|
|
|
/*******************************************************
|
|
* Routine: delay
|
|
* Description: spinning delay to use before udelay works
|
|
******************************************************/
|
|
static inline void delay(unsigned long loops)
|
|
{
|
|
__asm__("1:\n" "subs %0, %1, #1\n"
|
|
"bne 1b":"=r" (loops):"0"(loops));
|
|
}
|
|
|
|
/*****************************************
|
|
* Routine: board_init
|
|
* Description: Early hardware init.
|
|
*****************************************/
|
|
int board_init(void)
|
|
{
|
|
gpmc_init(); /* in SRAM or SDRM, finish GPMC */
|
|
|
|
gd->bd->bi_arch_number = 919;
|
|
/* adress of boot parameters */
|
|
gd->bd->bi_boot_params = (OMAP2420_SDRC_CS0 + 0x100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**********************************************************
|
|
* Routine: s_init
|
|
* Description: Does early system init of muxing and clocks.
|
|
* - Called path is with sram stack.
|
|
**********************************************************/
|
|
void s_init(void)
|
|
{
|
|
watchdog_init();
|
|
set_muxconf_regs();
|
|
delay(100);
|
|
|
|
peripheral_enable();
|
|
icache_enable();
|
|
}
|
|
|
|
/*******************************************************
|
|
* Routine: misc_init_r
|
|
* Description: Init ethernet (done here so udelay works)
|
|
********************************************************/
|
|
int misc_init_r(void)
|
|
{
|
|
ether_init(); /* better done here so timers are init'ed */
|
|
return (0);
|
|
}
|
|
|
|
/****************************************
|
|
* Routine: watchdog_init
|
|
* Description: Shut down watch dogs
|
|
*****************************************/
|
|
void watchdog_init(void)
|
|
{
|
|
/* There are 4 watch dogs. 1 secure, and 3 general purpose.
|
|
* The ROM takes care of the secure one. Of the 3 GP ones,
|
|
* 1 can reset us directly, the other 2 only generate MPU interrupts.
|
|
*/
|
|
__raw_writel(WD_UNLOCK1, WD2_BASE + WSPR);
|
|
wait_for_command_complete(WD2_BASE);
|
|
__raw_writel(WD_UNLOCK2, WD2_BASE + WSPR);
|
|
|
|
#define MPU_WD_CLOCKED 1
|
|
#if MPU_WD_CLOCKED
|
|
/* value 0x10 stick on aptix, BIT4 polarity seems oppsite */
|
|
__raw_writel(WD_UNLOCK1, WD3_BASE + WSPR);
|
|
wait_for_command_complete(WD3_BASE);
|
|
__raw_writel(WD_UNLOCK2, WD3_BASE + WSPR);
|
|
|
|
__raw_writel(WD_UNLOCK1, WD4_BASE + WSPR);
|
|
wait_for_command_complete(WD4_BASE);
|
|
__raw_writel(WD_UNLOCK2, WD4_BASE + WSPR);
|
|
#endif
|
|
}
|
|
|
|
/******************************************************
|
|
* Routine: wait_for_command_complete
|
|
* Description: Wait for posting to finish on watchdog
|
|
******************************************************/
|
|
void wait_for_command_complete(unsigned int wd_base)
|
|
{
|
|
int pending = 1;
|
|
do {
|
|
pending = __raw_readl(wd_base + WWPS);
|
|
} while (pending);
|
|
}
|
|
|
|
/*******************************************************************
|
|
* Routine:ether_init
|
|
* Description: take the Ethernet controller out of reset and wait
|
|
* for the EEPROM load to complete.
|
|
******************************************************************/
|
|
void ether_init(void)
|
|
{
|
|
#ifdef CONFIG_DRIVER_LAN91C96
|
|
int cnt = 20;
|
|
|
|
__raw_writeb(0x03, OMAP2420_CTRL_BASE + 0x0f2); /*protect->gpio74 */
|
|
|
|
__raw_writew(0x0, LAN_RESET_REGISTER);
|
|
do {
|
|
__raw_writew(0x1, LAN_RESET_REGISTER);
|
|
udelay(100);
|
|
if (cnt == 0) {
|
|
printf("1. eth reset err\n");
|
|
goto eth_reset_err_out;
|
|
}
|
|
--cnt;
|
|
} while (__raw_readw(LAN_RESET_REGISTER) != 0x1);
|
|
|
|
cnt = 20;
|
|
|
|
do {
|
|
__raw_writew(0x0, LAN_RESET_REGISTER);
|
|
udelay(100);
|
|
if (cnt == 0) {
|
|
printf("2. eth reset err\n");
|
|
goto eth_reset_err_out;
|
|
}
|
|
--cnt;
|
|
} while (__raw_readw(LAN_RESET_REGISTER) != 0x0000);
|
|
udelay(1000);
|
|
|
|
mask_config_reg(ETH_CONTROL_REG, 0x01);
|
|
udelay(1000);
|
|
|
|
eth_reset_err_out:
|
|
return;
|
|
#endif
|
|
}
|
|
|
|
/**********************************************
|
|
* Routine: dram_init
|
|
* Description: sets uboots idea of sdram size
|
|
**********************************************/
|
|
int dram_init(void)
|
|
{
|
|
unsigned int size0 = 0, size1 = 0;
|
|
u32 mtype, btype, rev = 0, cpu = 0;
|
|
#define NOT_EARLY 0
|
|
|
|
btype = get_board_type();
|
|
mtype = get_mem_type();
|
|
rev = get_cpu_rev();
|
|
cpu = get_cpu_type();
|
|
|
|
display_board_info(btype);
|
|
|
|
if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) {
|
|
/* init other chip select */
|
|
do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY);
|
|
}
|
|
|
|
size0 = get_sdr_cs_size(SDRC_CS0_OSET);
|
|
size1 = get_sdr_cs_size(SDRC_CS1_OSET);
|
|
|
|
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
|
|
gd->bd->bi_dram[0].size = size0;
|
|
#if CONFIG_NR_DRAM_BANKS > 1
|
|
gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + size0;
|
|
gd->bd->bi_dram[1].size = size1;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**********************************************************
|
|
* Routine: set_muxconf_regs
|
|
* Description: Setting up the configuration Mux registers
|
|
* specific to the hardware
|
|
*********************************************************/
|
|
void set_muxconf_regs(void)
|
|
{
|
|
muxSetupSDRC();
|
|
muxSetupGPMC();
|
|
muxSetupUsb0(); /* USB Device */
|
|
muxSetupUsbHost(); /* USB Host */
|
|
muxSetupUART1();
|
|
muxSetupLCD();
|
|
muxSetupMMCSD();
|
|
muxSetupTouchScreen();
|
|
}
|
|
|
|
/*****************************************************************
|
|
* Routine: peripheral_enable
|
|
* Description: Enable the clks & power for perifs (GPT2, UART1,...)
|
|
******************************************************************/
|
|
void peripheral_enable(void)
|
|
{
|
|
unsigned int v, if_clks = 0, func_clks = 0;
|
|
|
|
/* Enable GP2 timer. */
|
|
if_clks |= BIT4 | BIT3;
|
|
func_clks |= BIT4 | BIT3;
|
|
/* Sys_clk input OMAP2420_GPT2 */
|
|
v = __raw_readl(CM_CLKSEL2_CORE) | 0x4 | 0x2;
|
|
__raw_writel(v, CM_CLKSEL2_CORE);
|
|
__raw_writel(0x1, CM_CLKSEL_WKUP);
|
|
|
|
#ifdef CFG_NS16550
|
|
/* Enable UART1 clock */
|
|
func_clks |= BIT21;
|
|
if_clks |= BIT21;
|
|
#endif
|
|
/* Interface clocks on */
|
|
v = __raw_readl(CM_ICLKEN1_CORE) | if_clks;
|
|
__raw_writel(v, CM_ICLKEN1_CORE);
|
|
/* Functional Clocks on */
|
|
v = __raw_readl(CM_FCLKEN1_CORE) | func_clks;
|
|
__raw_writel(v, CM_FCLKEN1_CORE);
|
|
delay(1000);
|
|
|
|
#ifndef KERNEL_UPDATED
|
|
{
|
|
#define V1 0xffffffff
|
|
#define V2 0x00000007
|
|
|
|
__raw_writel(V1, CM_FCLKEN1_CORE);
|
|
__raw_writel(V2, CM_FCLKEN2_CORE);
|
|
__raw_writel(V1, CM_ICLKEN1_CORE);
|
|
__raw_writel(V1, CM_ICLKEN2_CORE);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/****************************************
|
|
* Routine: muxSetupUsb0 (ostboot)
|
|
* Description: Setup usb muxing
|
|
*****************************************/
|
|
void muxSetupUsb0(void)
|
|
{
|
|
mask_config_reg(CONTROL_PADCONF_USB0_PUEN, 0x1f);
|
|
mask_config_reg(CONTROL_PADCONF_USB0_VP, 0x1f);
|
|
mask_config_reg(CONTROL_PADCONF_USB0_VM, 0x1f);
|
|
mask_config_reg(CONTROL_PADCONF_USB0_RCV, 0x1f);
|
|
mask_config_reg(CONTROL_PADCONF_USB0_TXEN, 0x1f);
|
|
mask_config_reg(CONTROL_PADCONF_USB0_SE0, 0x1f);
|
|
mask_config_reg(CONTROL_PADCONF_USB0_DAT, 0x1f);
|
|
}
|
|
|
|
/****************************************
|
|
* Routine: muxSetupUSBHost (ostboot)
|
|
* Description: Setup USB Host muxing
|
|
*****************************************/
|
|
void muxSetupUsbHost(void)
|
|
{
|
|
/* V19 */
|
|
write_config_reg(CONTROL_PADCONF_USB1_RCV, 1);
|
|
/* W20 */
|
|
write_config_reg(CONTROL_PADCONF_USB1_TXEN, 1);
|
|
/* N14 */
|
|
write_config_reg(CONTROL_PADCONF_GPIO69, 3);
|
|
/* P15 */
|
|
write_config_reg(CONTROL_PADCONF_GPIO70, 3);
|
|
/* L18 */
|
|
write_config_reg(CONTROL_PADCONF_GPIO102, 3);
|
|
/* L19 */
|
|
write_config_reg(CONTROL_PADCONF_GPIO103, 3);
|
|
/* K15 */
|
|
write_config_reg(CONTROL_PADCONF_GPIO104, 3);
|
|
/* K14 */
|
|
write_config_reg(CONTROL_PADCONF_GPIO105, 3);
|
|
}
|
|
|
|
/****************************************
|
|
* Routine: muxSetupUART1 (ostboot)
|
|
* Description: Set up uart1 muxing
|
|
*****************************************/
|
|
void muxSetupUART1(void)
|
|
{
|
|
/* UART1_CTS pin configuration, PIN = D21, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_UART1_CTS, 0);
|
|
/* UART1_RTS pin configuration, PIN = H21, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_UART1_RTS, 0);
|
|
/* UART1_TX pin configuration, PIN = L20, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_UART1_TX, 0);
|
|
/* UART1_RX pin configuration, PIN = T21, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_UART1_RX, 0);
|
|
}
|
|
|
|
/****************************************
|
|
* Routine: muxSetupLCD (ostboot)
|
|
* Description: Setup lcd muxing
|
|
*****************************************/
|
|
void muxSetupLCD(void)
|
|
{
|
|
/* LCD_D0 pin configuration, PIN = Y7, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D0, 0);
|
|
/* LCD_D1 pin configuration, PIN = P10 , Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D1, 0);
|
|
/* LCD_D2 pin configuration, PIN = V8, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D2, 0);
|
|
/* LCD_D3 pin configuration, PIN = Y8, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D3, 0);
|
|
/* LCD_D4 pin configuration, PIN = W8, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D4, 0);
|
|
/* LCD_D5 pin configuration, PIN = R10, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D5, 0);
|
|
/* LCD_D6 pin configuration, PIN = Y9, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D6, 0);
|
|
/* LCD_D7 pin configuration, PIN = V9, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D7, 0);
|
|
/* LCD_D8 pin configuration, PIN = W9, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D8, 0);
|
|
/* LCD_D9 pin configuration, PIN = P11, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D9, 0);
|
|
/* LCD_D10 pin configuration, PIN = V10, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D10, 0);
|
|
/* LCD_D11 pin configuration, PIN = Y10, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D11, 0);
|
|
/* LCD_D12 pin configuration, PIN = W10, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D12, 0);
|
|
/* LCD_D13 pin configuration, PIN = R11, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D13, 0);
|
|
/* LCD_D14 pin configuration, PIN = V11, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D14, 0);
|
|
/* LCD_D15 pin configuration, PIN = W11, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D15, 0);
|
|
/* LCD_D16 pin configuration, PIN = P12, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D16, 0);
|
|
/* LCD_D17 pin configuration, PIN = R12, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D17, 0);
|
|
/* LCD_PCLK pin configuration, PIN = W6, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_PCLK, 0);
|
|
/* LCD_VSYNC pin configuration, PIN = V7, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_VSYNC, 0);
|
|
/* LCD_HSYNC pin configuration, PIN = Y6, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_HSYNC, 0);
|
|
/* LCD_ACBIAS pin configuration, PIN = W7, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_ACBIAS, 0);
|
|
}
|
|
|
|
/****************************************
|
|
* Routine: muxSetupMMCSD (ostboot)
|
|
* Description: set up MMC muxing
|
|
*****************************************/
|
|
void muxSetupMMCSD(void)
|
|
{
|
|
/* SDMMC_CLKI pin configuration, PIN = H15, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_CLKI, 0);
|
|
/* SDMMC_CLKO pin configuration, PIN = G19, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_CLKO, 0);
|
|
/* SDMMC_CMD pin configuration, PIN = H18, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_CMD, 0);
|
|
/* SDMMC_DAT0 pin configuration, PIN = F20, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_DAT0, 0);
|
|
/* SDMMC_DAT1 pin configuration, PIN = H14, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_DAT1, 0);
|
|
/* SDMMC_DAT2 pin configuration, PIN = E19, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_DAT2, 0);
|
|
/* SDMMC_DAT3 pin configuration, PIN = D19, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_DAT3, 0);
|
|
/* SDMMC_DDIR0 pin configuration, PIN = F19, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR0, 0);
|
|
/* SDMMC_DDIR1 pin configuration, PIN = E20, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR1, 0);
|
|
/* SDMMC_DDIR2 pin configuration, PIN = F18, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR2, 0);
|
|
/* SDMMC_DDIR3 pin configuration, PIN = E18, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR3, 0);
|
|
/* SDMMC_CDIR pin configuration, PIN = G18, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_CMD_DIR, 0);
|
|
}
|
|
|
|
/******************************************
|
|
* Routine: muxSetupTouchScreen (ostboot)
|
|
* Description: Set up touch screen muxing
|
|
*******************************************/
|
|
void muxSetupTouchScreen(void)
|
|
{
|
|
/* SPI1_CLK pin configuration, PIN = U18, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_SPI1_CLK, 0);
|
|
/* SPI1_MOSI pin configuration, PIN = V20, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_SPI1_SIMO, 0);
|
|
/* SPI1_MISO pin configuration, PIN = T18, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_SPI1_SOMI, 0);
|
|
/* SPI1_nCS0 pin configuration, PIN = U19, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_SPI1_NCS0, 0);
|
|
#define CONTROL_PADCONF_GPIO85 CONTROL_PADCONF_SPI1_NCS1
|
|
/* PEN_IRQ pin configuration, PIN = N15, Mode = 3, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_GPIO85, 3);
|
|
}
|
|
|
|
/***************************************************************
|
|
* Routine: muxSetupGPMC (ostboot)
|
|
* Description: Configures balls which cam up in protected mode
|
|
***************************************************************/
|
|
void muxSetupGPMC(void)
|
|
{
|
|
/* gpmc_io_dir, MCR */
|
|
volatile unsigned int *MCR = (unsigned int *) 0x4800008C;
|
|
*MCR = 0x19000000;
|
|
|
|
/* NOR FLASH CS0 */
|
|
/* signal - Gpmc_clk; pin - J4; offset - 0x0088; mode 0; Byte-3 */
|
|
write_config_reg(CONTROL_PADCONF_GPMC_D2_BYTE3, 0);
|
|
/* MPDB(Multi Port Debug Port) CS1 */
|
|
/* signal - gpmc_ncs1; pin - N8; offset - 0x008D; mode 0; Byte-1 */
|
|
write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE1, 0);
|
|
/* signal - Gpmc_ncs2; pin - E2; offset - 0x008E; mode 0; Byte-2 */
|
|
write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE2, 0);
|
|
/* signal - Gpmc_ncs3; pin - N2; offset - 0x008F; mode 0; Byte-3 */
|
|
write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE3, 0);
|
|
/* signal - Gpmc_ncs4; pin - ??; offset - 0x0090; mode 0; Byte-4 */
|
|
write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE4, 0);
|
|
/* signal - Gpmc_ncs5; pin - ??; offset - 0x0091; mode 0; Byte-5 */
|
|
write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE5, 0);
|
|
/* signal - Gpmc_ncs6; pin - ??; offset - 0x0092; mode 0; Byte-6 */
|
|
write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE6, 0);
|
|
/* signal - Gpmc_ncs7; pin - ??; offset - 0x0093; mode 0; Byte-7 */
|
|
write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE7, 0);
|
|
}
|
|
|
|
/****************************************************************
|
|
* Routine: muxSetupSDRC (ostboot)
|
|
* Description: Configures balls which come up in protected mode
|
|
****************************************************************/
|
|
void muxSetupSDRC(void)
|
|
{
|
|
/* It's set by IPL */
|
|
}
|