mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-17 07:28:51 +09:00
![Angelo Dureghello](/assets/img/avatar_default.png)
Fix compilation warnings for redefined 'clamp' macro and non-uniform clamp macro types. Signed-off-by: Angelo Dureghello <angelo@sysam.it> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
355 lines
9.5 KiB
C
355 lines
9.5 KiB
C
/*
|
|
* Freescale Coldfire Queued SPI driver
|
|
*
|
|
* NOTE:
|
|
* This driver is written to transfer 8 bit at-a-time and uses the dedicated
|
|
* SPI slave select pins as bit-banged GPIO to work with spi_flash subsystem.
|
|
*
|
|
* Copyright (C) 2011 Ruggedcom, Inc.
|
|
* Richard Retanubun (richardretanubun@freescale.com)
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <asm/immap.h>
|
|
#include <asm/io.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define to_cf_qspi_slave(s) container_of(s, struct cf_qspi_slave, slave)
|
|
|
|
struct cf_qspi_slave {
|
|
struct spi_slave slave; /* Specific bus:cs ID for each device */
|
|
qspi_t *regs; /* Pointer to SPI controller registers */
|
|
u16 qmr; /* QMR: Queued Mode Register */
|
|
u16 qwr; /* QWR: Queued Wrap Register */
|
|
u16 qcr; /* QCR: Queued Command Ram */
|
|
};
|
|
|
|
/* Register write wrapper functions */
|
|
static void write_qmr(volatile qspi_t *qspi, u16 val) { qspi->mr = val; }
|
|
static void write_qdlyr(volatile qspi_t *qspi, u16 val) { qspi->dlyr = val; }
|
|
static void write_qwr(volatile qspi_t *qspi, u16 val) { qspi->wr = val; }
|
|
static void write_qir(volatile qspi_t *qspi, u16 val) { qspi->ir = val; }
|
|
static void write_qar(volatile qspi_t *qspi, u16 val) { qspi->ar = val; }
|
|
static void write_qdr(volatile qspi_t *qspi, u16 val) { qspi->dr = val; }
|
|
/* Register read wrapper functions */
|
|
static u16 read_qdlyr(volatile qspi_t *qspi) { return qspi->dlyr; }
|
|
static u16 read_qwr(volatile qspi_t *qspi) { return qspi->wr; }
|
|
static u16 read_qir(volatile qspi_t *qspi) { return qspi->ir; }
|
|
static u16 read_qdr(volatile qspi_t *qspi) { return qspi->dr; }
|
|
|
|
/* These call points may be different for each ColdFire CPU */
|
|
extern void cfspi_port_conf(void);
|
|
static void cfspi_cs_activate(uint bus, uint cs, uint cs_active_high);
|
|
static void cfspi_cs_deactivate(uint bus, uint cs, uint cs_active_high);
|
|
|
|
int spi_claim_bus(struct spi_slave *slave)
|
|
{
|
|
return 0;
|
|
}
|
|
void spi_release_bus(struct spi_slave *slave)
|
|
{
|
|
}
|
|
|
|
__attribute__((weak))
|
|
void spi_init(void)
|
|
{
|
|
cfspi_port_conf();
|
|
}
|
|
|
|
__attribute__((weak))
|
|
void spi_cs_activate(struct spi_slave *slave)
|
|
{
|
|
struct cf_qspi_slave *dev = to_cf_qspi_slave(slave);
|
|
|
|
cfspi_cs_activate(slave->bus, slave->cs, !(dev->qwr & QSPI_QWR_CSIV));
|
|
}
|
|
|
|
__attribute__((weak))
|
|
void spi_cs_deactivate(struct spi_slave *slave)
|
|
{
|
|
struct cf_qspi_slave *dev = to_cf_qspi_slave(slave);
|
|
|
|
cfspi_cs_deactivate(slave->bus, slave->cs, !(dev->qwr & QSPI_QWR_CSIV));
|
|
}
|
|
|
|
__attribute__((weak))
|
|
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
|
{
|
|
/* Only 1 bus and 4 chipselect per controller */
|
|
if (bus == 0 && (cs >= 0 && cs < 4))
|
|
return 1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
void spi_free_slave(struct spi_slave *slave)
|
|
{
|
|
struct cf_qspi_slave *dev = to_cf_qspi_slave(slave);
|
|
|
|
free(dev);
|
|
}
|
|
|
|
/* Translate information given by spi_setup_slave to members of cf_qspi_slave */
|
|
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
|
|
unsigned int max_hz, unsigned int mode)
|
|
{
|
|
struct cf_qspi_slave *dev = NULL;
|
|
|
|
if (!spi_cs_is_valid(bus, cs))
|
|
return NULL;
|
|
|
|
dev = spi_alloc_slave(struct cf_qspi_slave, bus, cs);
|
|
if (!dev)
|
|
return NULL;
|
|
|
|
/* Initialize to known value */
|
|
dev->regs = (qspi_t *)MMAP_QSPI;
|
|
dev->qmr = 0;
|
|
dev->qwr = 0;
|
|
dev->qcr = 0;
|
|
|
|
|
|
/* Map max_hz to QMR[BAUD] */
|
|
if (max_hz == 0) /* Go as fast as possible */
|
|
dev->qmr = 2u;
|
|
else /* Get the closest baud rate */
|
|
dev->qmr = clamp(((gd->bus_clk >> 2) + max_hz - 1)/max_hz,
|
|
2lu, 255lu);
|
|
|
|
/* Map mode to QMR[CPOL] and QMR[CPHA] */
|
|
if (mode & SPI_CPOL)
|
|
dev->qmr |= QSPI_QMR_CPOL;
|
|
|
|
if (mode & SPI_CPHA)
|
|
dev->qmr |= QSPI_QMR_CPHA;
|
|
|
|
/* Hardcode bit length to 8 bit per transter */
|
|
dev->qmr |= QSPI_QMR_BITS_8;
|
|
|
|
/* Set QMR[MSTR] to enable QSPI as master */
|
|
dev->qmr |= QSPI_QMR_MSTR;
|
|
|
|
/*
|
|
* Set QCR and QWR to default values for spi flash operation.
|
|
* If more custom QCR and QRW are needed, overload mode variable
|
|
*/
|
|
dev->qcr = (QSPI_QDR_CONT | QSPI_QDR_BITSE);
|
|
|
|
if (!(mode & SPI_CS_HIGH))
|
|
dev->qwr |= QSPI_QWR_CSIV;
|
|
|
|
return &dev->slave;
|
|
}
|
|
|
|
/* Transfer 8 bit at a time */
|
|
int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
|
|
void *din, unsigned long flags)
|
|
{
|
|
struct cf_qspi_slave *dev = to_cf_qspi_slave(slave);
|
|
volatile qspi_t *qspi = dev->regs;
|
|
u8 *txbuf = (u8 *)dout;
|
|
u8 *rxbuf = (u8 *)din;
|
|
u32 count = DIV_ROUND_UP(bitlen, 8);
|
|
u32 n, i = 0;
|
|
|
|
/* Sanitize arguments */
|
|
if (slave == NULL) {
|
|
printf("%s: NULL slave ptr\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
if (flags & SPI_XFER_BEGIN)
|
|
spi_cs_activate(slave);
|
|
|
|
/* There is something to send, lets process it. spi_xfer is also called
|
|
* just to toggle chip select, so bitlen of 0 is valid */
|
|
if (count > 0) {
|
|
/*
|
|
* NOTE: Since chip select is driven as a bit-bang-ed GPIO
|
|
* using spi_cs_activate() and spi_cs_deactivate(),
|
|
* the chip select settings inside the controller
|
|
* (i.e. QCR[CONT] and QWR[CSIV]) are moot. The bits are set to
|
|
* keep the controller settings consistent with the actual
|
|
* operation of the bus.
|
|
*/
|
|
|
|
/* Write the slave device's settings for the controller.*/
|
|
write_qmr(qspi, dev->qmr);
|
|
write_qwr(qspi, dev->qwr);
|
|
|
|
/* Limit transfer to 16 at a time */
|
|
n = min(count, 16u);
|
|
do {
|
|
/* Setup queue end point */
|
|
write_qwr(qspi, ((read_qwr(qspi) & QSPI_QWR_ENDQP_MASK)
|
|
| QSPI_QWR_ENDQP((n-1))));
|
|
|
|
/* Write Command RAM */
|
|
write_qar(qspi, QSPI_QAR_CMD);
|
|
for (i = 0; i < n; ++i)
|
|
write_qdr(qspi, dev->qcr);
|
|
|
|
/* Write TxBuf, if none given, fill with ZEROes */
|
|
write_qar(qspi, QSPI_QAR_TRANS);
|
|
if (txbuf) {
|
|
for (i = 0; i < n; ++i)
|
|
write_qdr(qspi, *txbuf++);
|
|
} else {
|
|
for (i = 0; i < n; ++i)
|
|
write_qdr(qspi, 0);
|
|
}
|
|
|
|
/* Clear QIR[SPIF] by writing a 1 to it */
|
|
write_qir(qspi, read_qir(qspi) | QSPI_QIR_SPIF);
|
|
/* Set QDLYR[SPE] to start sending */
|
|
write_qdlyr(qspi, read_qdlyr(qspi) | QSPI_QDLYR_SPE);
|
|
|
|
/* Poll QIR[SPIF] for transfer completion */
|
|
while ((read_qir(qspi) & QSPI_QIR_SPIF) != 1)
|
|
udelay(1);
|
|
|
|
/* If given read RxBuf, load data to it */
|
|
if (rxbuf) {
|
|
write_qar(qspi, QSPI_QAR_RECV);
|
|
for (i = 0; i < n; ++i)
|
|
*rxbuf++ = read_qdr(qspi);
|
|
}
|
|
|
|
/* Decrement count */
|
|
count -= n;
|
|
} while (count);
|
|
}
|
|
|
|
if (flags & SPI_XFER_END)
|
|
spi_cs_deactivate(slave);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Each MCF CPU may have different pin assignments for chip selects. */
|
|
#if defined(CONFIG_M5271)
|
|
/* Assert chip select, val = [1|0] , dir = out, mode = GPIO */
|
|
void cfspi_cs_activate(uint bus, uint cs, uint cs_active_high)
|
|
{
|
|
debug("%s: bus %d cs %d cs_active_high %d\n",
|
|
__func__, bus, cs, cs_active_high);
|
|
|
|
switch (cs) {
|
|
case 0: /* QSPI_CS[0] = PQSPI[3] */
|
|
if (cs_active_high)
|
|
mbar_writeByte(MCF_GPIO_PPDSDR_QSPI, 0x08);
|
|
else
|
|
mbar_writeByte(MCF_GPIO_PCLRR_QSPI, 0xF7);
|
|
|
|
mbar_writeByte(MCF_GPIO_PDDR_QSPI,
|
|
mbar_readByte(MCF_GPIO_PDDR_QSPI) | 0x08);
|
|
|
|
mbar_writeByte(MCF_GPIO_PAR_QSPI,
|
|
mbar_readByte(MCF_GPIO_PAR_QSPI) & 0xDF);
|
|
break;
|
|
case 1: /* QSPI_CS[1] = PQSPI[4] */
|
|
if (cs_active_high)
|
|
mbar_writeByte(MCF_GPIO_PPDSDR_QSPI, 0x10);
|
|
else
|
|
mbar_writeByte(MCF_GPIO_PCLRR_QSPI, 0xEF);
|
|
|
|
mbar_writeByte(MCF_GPIO_PDDR_QSPI,
|
|
mbar_readByte(MCF_GPIO_PDDR_QSPI) | 0x10);
|
|
|
|
mbar_writeByte(MCF_GPIO_PAR_QSPI,
|
|
mbar_readByte(MCF_GPIO_PAR_QSPI) & 0x3F);
|
|
break;
|
|
case 2: /* QSPI_CS[2] = PTIMER[7] */
|
|
if (cs_active_high)
|
|
mbar_writeByte(MCF_GPIO_PPDSDR_TIMER, 0x80);
|
|
else
|
|
mbar_writeByte(MCF_GPIO_PCLRR_TIMER, 0x7F);
|
|
|
|
mbar_writeByte(MCF_GPIO_PDDR_TIMER,
|
|
mbar_readByte(MCF_GPIO_PDDR_TIMER) | 0x80);
|
|
|
|
mbar_writeShort(MCF_GPIO_PAR_TIMER,
|
|
mbar_readShort(MCF_GPIO_PAR_TIMER) & 0x3FFF);
|
|
break;
|
|
case 3: /* QSPI_CS[3] = PTIMER[3] */
|
|
if (cs_active_high)
|
|
mbar_writeByte(MCF_GPIO_PPDSDR_TIMER, 0x08);
|
|
else
|
|
mbar_writeByte(MCF_GPIO_PCLRR_TIMER, 0xF7);
|
|
|
|
mbar_writeByte(MCF_GPIO_PDDR_TIMER,
|
|
mbar_readByte(MCF_GPIO_PDDR_TIMER) | 0x08);
|
|
|
|
mbar_writeShort(MCF_GPIO_PAR_TIMER,
|
|
mbar_readShort(MCF_GPIO_PAR_TIMER) & 0xFF3F);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Deassert chip select, val = [1|0], dir = in, mode = GPIO
|
|
* direction set as IN to undrive the pin, external pullup/pulldown will bring
|
|
* bus to deassert state.
|
|
*/
|
|
void cfspi_cs_deactivate(uint bus, uint cs, uint cs_active_high)
|
|
{
|
|
debug("%s: bus %d cs %d cs_active_high %d\n",
|
|
__func__, bus, cs, cs_active_high);
|
|
|
|
switch (cs) {
|
|
case 0: /* QSPI_CS[0] = PQSPI[3] */
|
|
if (cs_active_high)
|
|
mbar_writeByte(MCF_GPIO_PCLRR_QSPI, 0xF7);
|
|
else
|
|
mbar_writeByte(MCF_GPIO_PPDSDR_QSPI, 0x08);
|
|
|
|
mbar_writeByte(MCF_GPIO_PDDR_QSPI,
|
|
mbar_readByte(MCF_GPIO_PDDR_QSPI) & 0xF7);
|
|
|
|
mbar_writeByte(MCF_GPIO_PAR_QSPI,
|
|
mbar_readByte(MCF_GPIO_PAR_QSPI) & 0xDF);
|
|
break;
|
|
case 1: /* QSPI_CS[1] = PQSPI[4] */
|
|
if (cs_active_high)
|
|
mbar_writeByte(MCF_GPIO_PCLRR_QSPI, 0xEF);
|
|
else
|
|
mbar_writeByte(MCF_GPIO_PPDSDR_QSPI, 0x10);
|
|
|
|
mbar_writeByte(MCF_GPIO_PDDR_QSPI,
|
|
mbar_readByte(MCF_GPIO_PDDR_QSPI) & 0xEF);
|
|
|
|
mbar_writeByte(MCF_GPIO_PAR_QSPI,
|
|
mbar_readByte(MCF_GPIO_PAR_QSPI) & 0x3F);
|
|
break;
|
|
case 2: /* QSPI_CS[2] = PTIMER[7] */
|
|
if (cs_active_high)
|
|
mbar_writeByte(MCF_GPIO_PCLRR_TIMER, 0x7F);
|
|
else
|
|
mbar_writeByte(MCF_GPIO_PPDSDR_TIMER, 0x80);
|
|
|
|
mbar_writeByte(MCF_GPIO_PDDR_TIMER,
|
|
mbar_readByte(MCF_GPIO_PDDR_TIMER) & 0x7F);
|
|
|
|
mbar_writeShort(MCF_GPIO_PAR_TIMER,
|
|
mbar_readShort(MCF_GPIO_PAR_TIMER) & 0x3FFF);
|
|
break;
|
|
case 3: /* QSPI_CS[3] = PTIMER[3] */
|
|
if (cs_active_high)
|
|
mbar_writeByte(MCF_GPIO_PCLRR_TIMER, 0xF7);
|
|
else
|
|
mbar_writeByte(MCF_GPIO_PPDSDR_TIMER, 0x08);
|
|
|
|
mbar_writeByte(MCF_GPIO_PDDR_TIMER,
|
|
mbar_readByte(MCF_GPIO_PDDR_TIMER) & 0xF7);
|
|
|
|
mbar_writeShort(MCF_GPIO_PAR_TIMER,
|
|
mbar_readShort(MCF_GPIO_PAR_TIMER) & 0xFF3F);
|
|
break;
|
|
}
|
|
}
|
|
#endif /* CONFIG_M5271 */
|