mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-29 05:18:51 +09:00
![Przemyslaw Marczak](/assets/img/avatar_default.png)
Before this commit, the mmc devices were always registered in the same order. So dwmmc channel 0 was registered as mmc 0, channel 1 as mmc 1, etc. In case of possibility to boot from more then one device, the CONFIG_SYS_MMC_ENV_DEV should always point to right mmc device. This can be achieved by init boot device as first, so it will be always registered as mmc 0. Thanks to this, the 'saveenv' command will work fine for all mmc boot devices. Exynos based boards usually uses mmc host channels configuration: - 0, or 0+1 for 8 bit - as a default boot device (usually eMMC) - 2 for 4bit - as an optional boot device (usually SD card slot) And usually the boot order is defined by OM pin configuration, which can be changed in a few ways, eg. - Odroid U3 - eMMC card insertion -> first boot from eMMC - Odroid X2/XU3 - boot priority jumper By this commit, Exynos dwmmc driver will check the OM pin configuration, and then try to init the boot device and register it as mmc 0. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Simon Glass <sjg@chromium.org> Cc: Akshay Saraswat <akshay.s@samsung.com>
290 lines
7.2 KiB
C
290 lines
7.2 KiB
C
/*
|
|
* (C) Copyright 2012 SAMSUNG Electronics
|
|
* Jaehoon Chung <jh80.chung@samsung.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dwmmc.h>
|
|
#include <fdtdec.h>
|
|
#include <libfdt.h>
|
|
#include <malloc.h>
|
|
#include <asm/arch/dwmmc.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include <asm/arch/power.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm-generic/errno.h>
|
|
|
|
#define DWMMC_MAX_CH_NUM 4
|
|
#define DWMMC_MAX_FREQ 52000000
|
|
#define DWMMC_MIN_FREQ 400000
|
|
#define DWMMC_MMC0_SDR_TIMING_VAL 0x03030001
|
|
#define DWMMC_MMC2_SDR_TIMING_VAL 0x03020001
|
|
|
|
/* Exynos implmentation specific drver private data */
|
|
struct dwmci_exynos_priv_data {
|
|
u32 sdr_timing;
|
|
};
|
|
|
|
/*
|
|
* Function used as callback function to initialise the
|
|
* CLKSEL register for every mmc channel.
|
|
*/
|
|
static void exynos_dwmci_clksel(struct dwmci_host *host)
|
|
{
|
|
struct dwmci_exynos_priv_data *priv = host->priv;
|
|
|
|
dwmci_writel(host, DWMCI_CLKSEL, priv->sdr_timing);
|
|
}
|
|
|
|
unsigned int exynos_dwmci_get_clk(struct dwmci_host *host)
|
|
{
|
|
unsigned long sclk;
|
|
int8_t clk_div;
|
|
|
|
/*
|
|
* Since SDCLKIN is divided inside controller by the DIVRATIO
|
|
* value set in the CLKSEL register, we need to use the same output
|
|
* clock value to calculate the CLKDIV value.
|
|
* as per user manual:cclk_in = SDCLKIN / (DIVRATIO + 1)
|
|
*/
|
|
clk_div = ((dwmci_readl(host, DWMCI_CLKSEL) >> DWMCI_DIVRATIO_BIT)
|
|
& DWMCI_DIVRATIO_MASK) + 1;
|
|
sclk = get_mmc_clk(host->dev_index);
|
|
|
|
/*
|
|
* Assume to know divider value.
|
|
* When clock unit is broken, need to set "host->div"
|
|
*/
|
|
return sclk / clk_div / (host->div + 1);
|
|
}
|
|
|
|
static void exynos_dwmci_board_init(struct dwmci_host *host)
|
|
{
|
|
struct dwmci_exynos_priv_data *priv = host->priv;
|
|
|
|
if (host->quirks & DWMCI_QUIRK_DISABLE_SMU) {
|
|
dwmci_writel(host, EMMCP_MPSBEGIN0, 0);
|
|
dwmci_writel(host, EMMCP_SEND0, 0);
|
|
dwmci_writel(host, EMMCP_CTRL0,
|
|
MPSCTRL_SECURE_READ_BIT |
|
|
MPSCTRL_SECURE_WRITE_BIT |
|
|
MPSCTRL_NON_SECURE_READ_BIT |
|
|
MPSCTRL_NON_SECURE_WRITE_BIT | MPSCTRL_VALID);
|
|
}
|
|
|
|
/* Set to timing value at initial time */
|
|
if (priv->sdr_timing)
|
|
exynos_dwmci_clksel(host);
|
|
}
|
|
|
|
static int exynos_dwmci_core_init(struct dwmci_host *host, int index)
|
|
{
|
|
unsigned int div;
|
|
unsigned long freq, sclk;
|
|
struct dwmci_exynos_priv_data *priv = host->priv;
|
|
|
|
if (host->bus_hz)
|
|
freq = host->bus_hz;
|
|
else
|
|
freq = DWMMC_MAX_FREQ;
|
|
|
|
/* request mmc clock vlaue of 52MHz. */
|
|
sclk = get_mmc_clk(index);
|
|
div = DIV_ROUND_UP(sclk, freq);
|
|
/* set the clock divisor for mmc */
|
|
set_mmc_clk(index, div);
|
|
|
|
host->name = "EXYNOS DWMMC";
|
|
#ifdef CONFIG_EXYNOS5420
|
|
host->quirks = DWMCI_QUIRK_DISABLE_SMU;
|
|
#endif
|
|
host->board_init = exynos_dwmci_board_init;
|
|
|
|
if (!priv->sdr_timing) {
|
|
if (index == 0)
|
|
priv->sdr_timing = DWMMC_MMC0_SDR_TIMING_VAL;
|
|
else if (index == 2)
|
|
priv->sdr_timing = DWMMC_MMC2_SDR_TIMING_VAL;
|
|
}
|
|
|
|
host->caps = MMC_MODE_DDR_52MHz;
|
|
host->clksel = exynos_dwmci_clksel;
|
|
host->dev_index = index;
|
|
host->get_mmc_clk = exynos_dwmci_get_clk;
|
|
/* Add the mmc channel to be registered with mmc core */
|
|
if (add_dwmci(host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ)) {
|
|
printf("DWMMC%d registration failed\n", index);
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function adds the mmc channel to be registered with mmc core.
|
|
* index - mmc channel number.
|
|
* regbase - register base address of mmc channel specified in 'index'.
|
|
* bus_width - operating bus width of mmc channel specified in 'index'.
|
|
* clksel - value to be written into CLKSEL register in case of FDT.
|
|
* NULL in case od non-FDT.
|
|
*/
|
|
int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
|
|
{
|
|
struct dwmci_host *host = NULL;
|
|
struct dwmci_exynos_priv_data *priv;
|
|
|
|
host = malloc(sizeof(struct dwmci_host));
|
|
if (!host) {
|
|
error("dwmci_host malloc fail!\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
priv = malloc(sizeof(struct dwmci_exynos_priv_data));
|
|
if (!priv) {
|
|
error("dwmci_exynos_priv_data malloc fail!\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
host->ioaddr = (void *)regbase;
|
|
host->buswidth = bus_width;
|
|
|
|
if (clksel)
|
|
priv->sdr_timing = clksel;
|
|
|
|
host->priv = priv;
|
|
|
|
return exynos_dwmci_core_init(host, index);
|
|
}
|
|
|
|
#ifdef CONFIG_OF_CONTROL
|
|
static struct dwmci_host dwmci_host[DWMMC_MAX_CH_NUM];
|
|
|
|
static int do_dwmci_init(struct dwmci_host *host)
|
|
{
|
|
int index, flag, err;
|
|
|
|
index = host->dev_index;
|
|
|
|
flag = host->buswidth == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE;
|
|
err = exynos_pinmux_config(host->dev_id, flag);
|
|
if (err) {
|
|
printf("DWMMC%d not configure\n", index);
|
|
return err;
|
|
}
|
|
|
|
return exynos_dwmci_core_init(host, index);
|
|
}
|
|
|
|
static int exynos_dwmci_get_config(const void *blob, int node,
|
|
struct dwmci_host *host)
|
|
{
|
|
int err = 0;
|
|
u32 base, timing[3];
|
|
struct dwmci_exynos_priv_data *priv;
|
|
|
|
priv = malloc(sizeof(struct dwmci_exynos_priv_data));
|
|
if (!priv) {
|
|
error("dwmci_exynos_priv_data malloc fail!\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Extract device id for each mmc channel */
|
|
host->dev_id = pinmux_decode_periph_id(blob, node);
|
|
|
|
host->dev_index = fdtdec_get_int(blob, node, "index", host->dev_id);
|
|
if (host->dev_index == host->dev_id)
|
|
host->dev_index = host->dev_id - PERIPH_ID_SDMMC0;
|
|
|
|
/* Get the bus width from the device node */
|
|
host->buswidth = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
|
|
if (host->buswidth <= 0) {
|
|
printf("DWMMC%d: Can't get bus-width\n", host->dev_index);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Set the base address from the device node */
|
|
base = fdtdec_get_addr(blob, node, "reg");
|
|
if (!base) {
|
|
printf("DWMMC%d: Can't get base address\n", host->dev_index);
|
|
return -EINVAL;
|
|
}
|
|
host->ioaddr = (void *)base;
|
|
|
|
/* Extract the timing info from the node */
|
|
err = fdtdec_get_int_array(blob, node, "samsung,timing", timing, 3);
|
|
if (err) {
|
|
printf("DWMMC%d: Can't get sdr-timings for devider\n",
|
|
host->dev_index);
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv->sdr_timing = (DWMCI_SET_SAMPLE_CLK(timing[0]) |
|
|
DWMCI_SET_DRV_CLK(timing[1]) |
|
|
DWMCI_SET_DIV_RATIO(timing[2]));
|
|
|
|
/* sdr_timing didn't assigned anything, use the default value */
|
|
if (!priv->sdr_timing) {
|
|
if (host->dev_index == 0)
|
|
priv->sdr_timing = DWMMC_MMC0_SDR_TIMING_VAL;
|
|
else if (host->dev_index == 2)
|
|
priv->sdr_timing = DWMMC_MMC2_SDR_TIMING_VAL;
|
|
}
|
|
|
|
host->fifoth_val = fdtdec_get_int(blob, node, "fifoth_val", 0);
|
|
host->bus_hz = fdtdec_get_int(blob, node, "bus_hz", 0);
|
|
host->div = fdtdec_get_int(blob, node, "div", 0);
|
|
|
|
host->priv = priv;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int exynos_dwmci_process_node(const void *blob,
|
|
int node_list[], int count)
|
|
{
|
|
struct dwmci_host *host;
|
|
int i, node, err;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
node = node_list[i];
|
|
if (node <= 0)
|
|
continue;
|
|
host = &dwmci_host[i];
|
|
err = exynos_dwmci_get_config(blob, node, host);
|
|
if (err) {
|
|
printf("%s: failed to decode dev %d\n", __func__, i);
|
|
return err;
|
|
}
|
|
|
|
do_dwmci_init(host);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int exynos_dwmmc_init(const void *blob)
|
|
{
|
|
int compat_id;
|
|
int node_list[DWMMC_MAX_CH_NUM];
|
|
int boot_dev_node;
|
|
int err = 0, count;
|
|
|
|
compat_id = COMPAT_SAMSUNG_EXYNOS_DWMMC;
|
|
|
|
count = fdtdec_find_aliases_for_id(blob, "mmc",
|
|
compat_id, node_list, DWMMC_MAX_CH_NUM);
|
|
|
|
/* For DWMMC always set boot device as mmc 0 */
|
|
if (count >= 3 && get_boot_mode() == BOOT_MODE_SD) {
|
|
boot_dev_node = node_list[2];
|
|
node_list[2] = node_list[0];
|
|
node_list[0] = boot_dev_node;
|
|
}
|
|
|
|
err = exynos_dwmci_process_node(blob, node_list, count);
|
|
|
|
return err;
|
|
}
|
|
#endif
|