mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 17:08:52 +09:00
![Mike Frysinger](/assets/img/avatar_default.png)
The new jffs2 code pushed the code size just over the limit, so increase the limit a bit more. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
263 lines
6.8 KiB
C
263 lines
6.8 KiB
C
/*
|
|
* U-boot - Configuration file for BF537 STAMP board
|
|
*/
|
|
|
|
#ifndef __CONFIG_BF537_STAMP_H__
|
|
#define __CONFIG_BF537_STAMP_H__
|
|
|
|
#include <asm/blackfin-config-pre.h>
|
|
|
|
|
|
/*
|
|
* Processor Settings
|
|
*/
|
|
#define CONFIG_BFIN_CPU bf537-0.2
|
|
#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
|
|
|
|
|
|
/*
|
|
* Clock Settings
|
|
* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
|
|
* SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
|
|
*/
|
|
/* CONFIG_CLKIN_HZ is any value in Hz */
|
|
#define CONFIG_CLKIN_HZ 25000000
|
|
/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
|
|
/* 1 = CLKIN / 2 */
|
|
#define CONFIG_CLKIN_HALF 0
|
|
/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
|
|
/* 1 = bypass PLL */
|
|
#define CONFIG_PLL_BYPASS 0
|
|
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
|
|
/* Values can range from 0-63 (where 0 means 64) */
|
|
#define CONFIG_VCO_MULT 20
|
|
/* CCLK_DIV controls the core clock divider */
|
|
/* Values can be 1, 2, 4, or 8 ONLY */
|
|
#define CONFIG_CCLK_DIV 1
|
|
/* SCLK_DIV controls the system clock divider */
|
|
/* Values can range from 1-15 */
|
|
#define CONFIG_SCLK_DIV 4
|
|
|
|
|
|
/*
|
|
* Memory Settings
|
|
*/
|
|
#define CONFIG_MEM_ADD_WDTH 10
|
|
#define CONFIG_MEM_SIZE 64
|
|
|
|
#define CONFIG_EBIU_SDRRC_VAL 0x306
|
|
#define CONFIG_EBIU_SDGCTL_VAL 0x91114d
|
|
|
|
#define CONFIG_EBIU_AMGCTL_VAL 0xFF
|
|
#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
|
|
#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
|
|
#define CONFIG_SYS_MALLOC_LEN (384 * 1024)
|
|
|
|
|
|
/*
|
|
* Network Settings
|
|
*/
|
|
#ifndef __ADSPBF534__
|
|
#define ADI_CMDS_NETWORK 1
|
|
#define CONFIG_BFIN_MAC
|
|
#define CONFIG_NETCONSOLE 1
|
|
#define CONFIG_NET_MULTI 1
|
|
#endif
|
|
#define CONFIG_HOSTNAME bf537-stamp
|
|
/* Uncomment next line to use fixed MAC address */
|
|
/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */
|
|
|
|
|
|
/*
|
|
* Flash Settings
|
|
*/
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
#define CONFIG_SYS_FLASH_BASE 0x20000000
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
#define CONFIG_SYS_FLASH_PROTECTION
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
/* some have 67 sectors (M29W320DB), but newer have 71 (M29W320EB) */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 71
|
|
|
|
|
|
/*
|
|
* SPI Settings
|
|
*/
|
|
#define CONFIG_BFIN_SPI
|
|
#define CONFIG_ENV_SPI_MAX_HZ 30000000
|
|
#define CONFIG_SF_DEFAULT_HZ 30000000
|
|
#define CONFIG_SPI_FLASH
|
|
#define CONFIG_SPI_FLASH_ATMEL
|
|
#define CONFIG_SPI_FLASH_SPANSION
|
|
#define CONFIG_SPI_FLASH_STMICRO
|
|
#define CONFIG_SPI_FLASH_WINBOND
|
|
|
|
|
|
/*
|
|
* Env Storage Settings
|
|
*/
|
|
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
|
|
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
|
#define CONFIG_ENV_OFFSET 0x4000
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#define CONFIG_ENV_SECT_SIZE 0x2000
|
|
#else
|
|
#define CONFIG_ENV_IS_IN_FLASH
|
|
#define CONFIG_ENV_OFFSET 0x4000
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#define CONFIG_ENV_SECT_SIZE 0x2000
|
|
#endif
|
|
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
|
|
#define ENV_IS_EMBEDDED
|
|
#else
|
|
#define ENV_IS_EMBEDDED_CUSTOM
|
|
#endif
|
|
|
|
|
|
/*
|
|
* I2C Settings
|
|
*/
|
|
#define CONFIG_BFIN_TWI_I2C 1
|
|
#define CONFIG_HARD_I2C 1
|
|
#define CONFIG_SYS_I2C_SPEED 50000
|
|
#define CONFIG_SYS_I2C_SLAVE 0
|
|
|
|
|
|
/*
|
|
* SPI_MMC Settings
|
|
*/
|
|
#define CONFIG_MMC
|
|
#define CONFIG_BFIN_SPI_MMC
|
|
|
|
|
|
/*
|
|
* NAND Settings
|
|
*/
|
|
/* #define CONFIG_BF537_NAND */
|
|
#ifdef CONFIG_BF537_NAND
|
|
# define CONFIG_CMD_NAND
|
|
#endif
|
|
|
|
#define CONFIG_SYS_NAND_ADDR 0x20212000
|
|
#define CONFIG_SYS_NAND_BASE CONFIG_SYS_NAND_ADDR
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define SECTORSIZE 512
|
|
#define ADDR_COLUMN 1
|
|
#define ADDR_PAGE 2
|
|
#define ADDR_COLUMN_PAGE 3
|
|
#define NAND_ChipID_UNKNOWN 0x00
|
|
#define NAND_MAX_FLOORS 1
|
|
#define BFIN_NAND_READY PF3
|
|
|
|
#define NAND_WAIT_READY(nand) \
|
|
do { \
|
|
int timeout = 0; \
|
|
while (!(*pPORTFIO & PF3)) \
|
|
if (timeout++ > 100000) \
|
|
break; \
|
|
} while (0)
|
|
|
|
#define BFIN_NAND_CLE (1 << 2) /* A2 -> Command Enable */
|
|
#define BFIN_NAND_ALE (1 << 1) /* A1 -> Address Enable */
|
|
#define WRITE_NAND_COMMAND(d, adr) bfin_write8(adr | BFIN_NAND_CLE, d)
|
|
#define WRITE_NAND_ADDRESS(d, adr) bfin_write8(adr | BFIN_NAND_ALE, d)
|
|
#define WRITE_NAND(d, adr) bfin_write8(adr, d)
|
|
#define READ_NAND(adr) bfin_read8(adr)
|
|
|
|
|
|
/*
|
|
* CF-CARD IDE-HDD Support
|
|
*/
|
|
/* #define CONFIG_BFIN_TRUE_IDE */ /* Add CF flash card support */
|
|
/* #define CONFIG_BFIN_CF_IDE */ /* Add CF flash card support */
|
|
/* #define CONFIG_BFIN_HDD_IDE */ /* Add IDE Disk Drive (HDD) support */
|
|
|
|
#if defined(CONFIG_BFIN_CF_IDE) || \
|
|
defined(CONFIG_BFIN_HDD_IDE) || \
|
|
defined(CONFIG_BFIN_TRUE_IDE)
|
|
# define CONFIG_BFIN_IDE 1
|
|
# define CONFIG_CMD_IDE
|
|
#endif
|
|
|
|
#if defined(CONFIG_BFIN_IDE)
|
|
|
|
#define CONFIG_DOS_PARTITION 1
|
|
/*
|
|
* IDE/ATA stuff
|
|
*/
|
|
#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
|
|
#undef CONFIG_IDE_LED /* no led for ide supported */
|
|
#undef CONFIG_IDE_RESET /* no reset for ide supported */
|
|
|
|
#define CONFIG_SYS_IDE_MAXBUS 1
|
|
#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS * 1)
|
|
|
|
#undef CONFIG_EBIU_AMBCTL1_VAL
|
|
#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC3FFC3
|
|
|
|
#define CONFIG_CF_ATASEL_DIS 0x20311800
|
|
#define CONFIG_CF_ATASEL_ENA 0x20311802
|
|
|
|
#if defined(CONFIG_BFIN_TRUE_IDE)
|
|
/*
|
|
* Note that these settings aren't for the most part used in include/ata.h
|
|
* when all of the ATA registers are setup
|
|
*/
|
|
#define CONFIG_SYS_ATA_BASE_ADDR 0x2031C000
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET 0x0020 /* data I/O */
|
|
#define CONFIG_SYS_ATA_REG_OFFSET 0x0020 /* normal register accesses */
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET 0x001C /* alternate registers */
|
|
#define CONFIG_SYS_ATA_STRIDE 2 /* CF.A0 --> Blackfin.Ax */
|
|
|
|
#elif defined(CONFIG_BFIN_CF_IDE)
|
|
#define CONFIG_SYS_ATA_BASE_ADDR 0x20211800
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* data I/O */
|
|
#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* normal register accesses */
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET 0x000E /* alternate registers */
|
|
#define CONFIG_SYS_ATA_STRIDE 1 /* CF.A0 --> Blackfin.Ax */
|
|
|
|
#elif defined(CONFIG_BFIN_HDD_IDE)
|
|
#define CONFIG_SYS_ATA_BASE_ADDR 0x20314000
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET 0x0020 /* data I/O */
|
|
#define CONFIG_SYS_ATA_REG_OFFSET 0x0020 /* normal register accesses */
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET 0x001C /* alternate registers */
|
|
#define CONFIG_SYS_ATA_STRIDE 2 /* CF.A0 --> Blackfin.A1 */
|
|
#undef CONFIG_SCLK_DIV
|
|
#define CONFIG_SCLK_DIV 8
|
|
#endif
|
|
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Misc Settings
|
|
*/
|
|
#define CONFIG_MISC_INIT_R
|
|
#define CONFIG_RTC_BFIN
|
|
#define CONFIG_UART_CONSOLE 0
|
|
|
|
/* #define CONFIG_BF537_STAMP_LEDCMD 1 */
|
|
|
|
/* Define if want to do post memory test */
|
|
#undef CONFIG_POST
|
|
#ifdef CONFIG_POST
|
|
#define FLASH_START_POST_BLOCK 11 /* Should > = 11 */
|
|
#define FLASH_END_POST_BLOCK 71 /* Should < = 71 */
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Pull in common ADI header for remaining command/environment setup
|
|
*/
|
|
#include <configs/bfin_adi_common.h>
|
|
|
|
#include <asm/blackfin-config-post.h>
|
|
|
|
#endif
|