u-boot-brain/drivers/video/tegra.c
Simon Glass caa4daa2ae dm: treewide: Rename 'platdata' variables to just 'plat'
We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:08 -07:00

429 lines
11 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2011 The Chromium OS Authors.
*/
#include <common.h>
#include <dm.h>
#include <fdtdec.h>
#include <log.h>
#include <panel.h>
#include <part.h>
#include <pwm.h>
#include <video.h>
#include <asm/cache.h>
#include <asm/system.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/funcmux.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/pwm.h>
#include <asm/arch/display.h>
#include <asm/arch-tegra/timer.h>
DECLARE_GLOBAL_DATA_PTR;
/* Information about the display controller */
struct tegra_lcd_priv {
int width; /* width in pixels */
int height; /* height in pixels */
enum video_log2_bpp log2_bpp; /* colour depth */
struct display_timing timing;
struct udevice *panel;
struct disp_ctlr *disp; /* Display controller to use */
fdt_addr_t frame_buffer; /* Address of frame buffer */
unsigned pixel_clock; /* Pixel clock in Hz */
};
enum {
/* Maximum LCD size we support */
LCD_MAX_WIDTH = 1366,
LCD_MAX_HEIGHT = 768,
LCD_MAX_LOG2_BPP = VIDEO_BPP16,
};
static void update_window(struct dc_ctlr *dc, struct disp_ctl_win *win)
{
unsigned h_dda, v_dda;
unsigned long val;
val = readl(&dc->cmd.disp_win_header);
val |= WINDOW_A_SELECT;
writel(val, &dc->cmd.disp_win_header);
writel(win->fmt, &dc->win.color_depth);
clrsetbits_le32(&dc->win.byte_swap, BYTE_SWAP_MASK,
BYTE_SWAP_NOSWAP << BYTE_SWAP_SHIFT);
val = win->out_x << H_POSITION_SHIFT;
val |= win->out_y << V_POSITION_SHIFT;
writel(val, &dc->win.pos);
val = win->out_w << H_SIZE_SHIFT;
val |= win->out_h << V_SIZE_SHIFT;
writel(val, &dc->win.size);
val = (win->w * win->bpp / 8) << H_PRESCALED_SIZE_SHIFT;
val |= win->h << V_PRESCALED_SIZE_SHIFT;
writel(val, &dc->win.prescaled_size);
writel(0, &dc->win.h_initial_dda);
writel(0, &dc->win.v_initial_dda);
h_dda = (win->w * 0x1000) / max(win->out_w - 1, 1U);
v_dda = (win->h * 0x1000) / max(win->out_h - 1, 1U);
val = h_dda << H_DDA_INC_SHIFT;
val |= v_dda << V_DDA_INC_SHIFT;
writel(val, &dc->win.dda_increment);
writel(win->stride, &dc->win.line_stride);
writel(0, &dc->win.buf_stride);
val = WIN_ENABLE;
if (win->bpp < 24)
val |= COLOR_EXPAND;
writel(val, &dc->win.win_opt);
writel((unsigned long)win->phys_addr, &dc->winbuf.start_addr);
writel(win->x, &dc->winbuf.addr_h_offset);
writel(win->y, &dc->winbuf.addr_v_offset);
writel(0xff00, &dc->win.blend_nokey);
writel(0xff00, &dc->win.blend_1win);
val = GENERAL_ACT_REQ | WIN_A_ACT_REQ;
val |= GENERAL_UPDATE | WIN_A_UPDATE;
writel(val, &dc->cmd.state_ctrl);
}
static int update_display_mode(struct dc_disp_reg *disp,
struct tegra_lcd_priv *priv)
{
struct display_timing *dt = &priv->timing;
unsigned long val;
unsigned long rate;
unsigned long div;
writel(0x0, &disp->disp_timing_opt);
writel(1 | 1 << 16, &disp->ref_to_sync);
writel(dt->hsync_len.typ | dt->vsync_len.typ << 16, &disp->sync_width);
writel(dt->hback_porch.typ | dt->vback_porch.typ << 16,
&disp->back_porch);
writel((dt->hfront_porch.typ - 1) | (dt->vfront_porch.typ - 1) << 16,
&disp->front_porch);
writel(dt->hactive.typ | (dt->vactive.typ << 16), &disp->disp_active);
val = DE_SELECT_ACTIVE << DE_SELECT_SHIFT;
val |= DE_CONTROL_NORMAL << DE_CONTROL_SHIFT;
writel(val, &disp->data_enable_opt);
val = DATA_FORMAT_DF1P1C << DATA_FORMAT_SHIFT;
val |= DATA_ALIGNMENT_MSB << DATA_ALIGNMENT_SHIFT;
val |= DATA_ORDER_RED_BLUE << DATA_ORDER_SHIFT;
writel(val, &disp->disp_interface_ctrl);
/*
* The pixel clock divider is in 7.1 format (where the bottom bit
* represents 0.5). Here we calculate the divider needed to get from
* the display clock (typically 600MHz) to the pixel clock. We round
* up or down as requried.
*/
rate = clock_get_periph_rate(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL);
div = ((rate * 2 + priv->pixel_clock / 2) / priv->pixel_clock) - 2;
debug("Display clock %lu, divider %lu\n", rate, div);
writel(0x00010001, &disp->shift_clk_opt);
val = PIXEL_CLK_DIVIDER_PCD1 << PIXEL_CLK_DIVIDER_SHIFT;
val |= div << SHIFT_CLK_DIVIDER_SHIFT;
writel(val, &disp->disp_clk_ctrl);
return 0;
}
/* Start up the display and turn on power to PWMs */
static void basic_init(struct dc_cmd_reg *cmd)
{
u32 val;
writel(0x00000100, &cmd->gen_incr_syncpt_ctrl);
writel(0x0000011a, &cmd->cont_syncpt_vsync);
writel(0x00000000, &cmd->int_type);
writel(0x00000000, &cmd->int_polarity);
writel(0x00000000, &cmd->int_mask);
writel(0x00000000, &cmd->int_enb);
val = PW0_ENABLE | PW1_ENABLE | PW2_ENABLE;
val |= PW3_ENABLE | PW4_ENABLE | PM0_ENABLE;
val |= PM1_ENABLE;
writel(val, &cmd->disp_pow_ctrl);
val = readl(&cmd->disp_cmd);
val |= CTRL_MODE_C_DISPLAY << CTRL_MODE_SHIFT;
writel(val, &cmd->disp_cmd);
}
static void basic_init_timer(struct dc_disp_reg *disp)
{
writel(0x00000020, &disp->mem_high_pri);
writel(0x00000001, &disp->mem_high_pri_timer);
}
static const u32 rgb_enb_tab[PIN_REG_COUNT] = {
0x00000000,
0x00000000,
0x00000000,
0x00000000,
};
static const u32 rgb_polarity_tab[PIN_REG_COUNT] = {
0x00000000,
0x01000000,
0x00000000,
0x00000000,
};
static const u32 rgb_data_tab[PIN_REG_COUNT] = {
0x00000000,
0x00000000,
0x00000000,
0x00000000,
};
static const u32 rgb_sel_tab[PIN_OUTPUT_SEL_COUNT] = {
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00210222,
0x00002200,
0x00020000,
};
static void rgb_enable(struct dc_com_reg *com)
{
int i;
for (i = 0; i < PIN_REG_COUNT; i++) {
writel(rgb_enb_tab[i], &com->pin_output_enb[i]);
writel(rgb_polarity_tab[i], &com->pin_output_polarity[i]);
writel(rgb_data_tab[i], &com->pin_output_data[i]);
}
for (i = 0; i < PIN_OUTPUT_SEL_COUNT; i++)
writel(rgb_sel_tab[i], &com->pin_output_sel[i]);
}
static int setup_window(struct disp_ctl_win *win,
struct tegra_lcd_priv *priv)
{
win->x = 0;
win->y = 0;
win->w = priv->width;
win->h = priv->height;
win->out_x = 0;
win->out_y = 0;
win->out_w = priv->width;
win->out_h = priv->height;
win->phys_addr = priv->frame_buffer;
win->stride = priv->width * (1 << priv->log2_bpp) / 8;
debug("%s: depth = %d\n", __func__, priv->log2_bpp);
switch (priv->log2_bpp) {
case VIDEO_BPP32:
win->fmt = COLOR_DEPTH_R8G8B8A8;
win->bpp = 32;
break;
case VIDEO_BPP16:
win->fmt = COLOR_DEPTH_B5G6R5;
win->bpp = 16;
break;
default:
debug("Unsupported LCD bit depth");
return -1;
}
return 0;
}
/**
* Register a new display based on device tree configuration.
*
* The frame buffer can be positioned by U-Boot or overridden by the fdt.
* You should pass in the U-Boot address here, and check the contents of
* struct tegra_lcd_priv to see what was actually chosen.
*
* @param blob Device tree blob
* @param priv Driver's private data
* @param default_lcd_base Default address of LCD frame buffer
* @return 0 if ok, -1 on error (unsupported bits per pixel)
*/
static int tegra_display_probe(const void *blob, struct tegra_lcd_priv *priv,
void *default_lcd_base)
{
struct disp_ctl_win window;
struct dc_ctlr *dc;
priv->frame_buffer = (u32)default_lcd_base;
dc = (struct dc_ctlr *)priv->disp;
/*
* A header file for clock constants was NAKed upstream.
* TODO: Put this into the FDT and fdt_lcd struct when we have clock
* support there
*/
clock_start_periph_pll(PERIPH_ID_HOST1X, CLOCK_ID_PERIPH,
144 * 1000000);
clock_start_periph_pll(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL,
600 * 1000000);
basic_init(&dc->cmd);
basic_init_timer(&dc->disp);
rgb_enable(&dc->com);
if (priv->pixel_clock)
update_display_mode(&dc->disp, priv);
if (setup_window(&window, priv))
return -1;
update_window(dc, &window);
return 0;
}
static int tegra_lcd_probe(struct udevice *dev)
{
struct video_uc_platdata *plat = dev_get_uclass_plat(dev);
struct video_priv *uc_priv = dev_get_uclass_priv(dev);
struct tegra_lcd_priv *priv = dev_get_priv(dev);
const void *blob = gd->fdt_blob;
int ret;
/* Initialize the Tegra display controller */
funcmux_select(PERIPH_ID_DISP1, FUNCMUX_DEFAULT);
if (tegra_display_probe(blob, priv, (void *)plat->base)) {
printf("%s: Failed to probe display driver\n", __func__);
return -1;
}
pinmux_set_func(PMUX_PINGRP_GPU, PMUX_FUNC_PWM);
pinmux_tristate_disable(PMUX_PINGRP_GPU);
ret = panel_enable_backlight(priv->panel);
if (ret) {
debug("%s: Cannot enable backlight, ret=%d\n", __func__, ret);
return ret;
}
mmu_set_region_dcache_behaviour(priv->frame_buffer, plat->size,
DCACHE_WRITETHROUGH);
/* Enable flushing after LCD writes if requested */
video_set_flush_dcache(dev, true);
uc_priv->xsize = priv->width;
uc_priv->ysize = priv->height;
uc_priv->bpix = priv->log2_bpp;
debug("LCD frame buffer at %pa, size %x\n", &priv->frame_buffer,
plat->size);
return 0;
}
static int tegra_lcd_ofdata_to_platdata(struct udevice *dev)
{
struct tegra_lcd_priv *priv = dev_get_priv(dev);
const void *blob = gd->fdt_blob;
struct display_timing *timing;
int node = dev_of_offset(dev);
int panel_node;
int rgb;
int ret;
priv->disp = dev_read_addr_ptr(dev);
if (!priv->disp) {
debug("%s: No display controller address\n", __func__);
return -EINVAL;
}
rgb = fdt_subnode_offset(blob, node, "rgb");
if (rgb < 0) {
debug("%s: Cannot find rgb subnode for '%s' (ret=%d)\n",
__func__, dev->name, rgb);
return -EINVAL;
}
ret = fdtdec_decode_display_timing(blob, rgb, 0, &priv->timing);
if (ret) {
debug("%s: Cannot read display timing for '%s' (ret=%d)\n",
__func__, dev->name, ret);
return -EINVAL;
}
timing = &priv->timing;
priv->width = timing->hactive.typ;
priv->height = timing->vactive.typ;
priv->pixel_clock = timing->pixelclock.typ;
priv->log2_bpp = VIDEO_BPP16;
/*
* Sadly the panel phandle is in an rgb subnode so we cannot use
* uclass_get_device_by_phandle().
*/
panel_node = fdtdec_lookup_phandle(blob, rgb, "nvidia,panel");
if (panel_node < 0) {
debug("%s: Cannot find panel information\n", __func__);
return -EINVAL;
}
ret = uclass_get_device_by_of_offset(UCLASS_PANEL, panel_node,
&priv->panel);
if (ret) {
debug("%s: Cannot find panel for '%s' (ret=%d)\n", __func__,
dev->name, ret);
return ret;
}
return 0;
}
static int tegra_lcd_bind(struct udevice *dev)
{
struct video_uc_platdata *plat = dev_get_uclass_plat(dev);
const void *blob = gd->fdt_blob;
int node = dev_of_offset(dev);
int rgb;
rgb = fdt_subnode_offset(blob, node, "rgb");
if ((rgb < 0) || !fdtdec_get_is_enabled(blob, rgb))
return -ENODEV;
plat->size = LCD_MAX_WIDTH * LCD_MAX_HEIGHT *
(1 << LCD_MAX_LOG2_BPP) / 8;
return 0;
}
static const struct video_ops tegra_lcd_ops = {
};
static const struct udevice_id tegra_lcd_ids[] = {
{ .compatible = "nvidia,tegra20-dc" },
{ }
};
U_BOOT_DRIVER(tegra_lcd) = {
.name = "tegra_lcd",
.id = UCLASS_VIDEO,
.of_match = tegra_lcd_ids,
.ops = &tegra_lcd_ops,
.bind = tegra_lcd_bind,
.probe = tegra_lcd_probe,
.ofdata_to_platdata = tegra_lcd_ofdata_to_platdata,
.priv_auto = sizeof(struct tegra_lcd_priv),
};