u-boot-brain/drivers/spi/omap3_spi.c
Simon Glass caa4daa2ae dm: treewide: Rename 'platdata' variables to just 'plat'
We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:08 -07:00

516 lines
13 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016 Jagan Teki <jteki@openedev.com>
* Christophe Ricard <christophe.ricard@gmail.com>
*
* Copyright (C) 2010 Dirk Behme <dirk.behme@googlemail.com>
*
* Driver for McSPI controller on OMAP3. Based on davinci_spi.c
* Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
*
* Copyright (C) 2007 Atmel Corporation
*
* Parts taken from linux/drivers/spi/omap2_mcspi.c
* Copyright (C) 2005, 2006 Nokia Corporation
*
* Modified by Ruslan Araslanov <ruslan.araslanov@vitecmm.com>
*/
#include <common.h>
#include <dm.h>
#include <spi.h>
#include <malloc.h>
#include <asm/io.h>
#include <linux/bitops.h>
#include <omap3_spi.h>
DECLARE_GLOBAL_DATA_PTR;
struct omap2_mcspi_platform_config {
unsigned int regs_offset;
};
struct omap3_spi_priv {
struct mcspi *regs;
unsigned int cs;
unsigned int freq;
unsigned int mode;
unsigned int wordlen;
unsigned int pin_dir:1;
};
static void omap3_spi_write_chconf(struct omap3_spi_priv *priv, int val)
{
writel(val, &priv->regs->channel[priv->cs].chconf);
/* Flash post writes to make immediate effect */
readl(&priv->regs->channel[priv->cs].chconf);
}
static void omap3_spi_set_enable(struct omap3_spi_priv *priv, int enable)
{
writel(enable, &priv->regs->channel[priv->cs].chctrl);
/* Flash post writes to make immediate effect */
readl(&priv->regs->channel[priv->cs].chctrl);
}
static int omap3_spi_write(struct omap3_spi_priv *priv, unsigned int len,
const void *txp, unsigned long flags)
{
ulong start;
int i, chconf;
chconf = readl(&priv->regs->channel[priv->cs].chconf);
/* Enable the channel */
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_EN);
chconf &= ~(OMAP3_MCSPI_CHCONF_TRM_MASK | OMAP3_MCSPI_CHCONF_WL_MASK);
chconf |= (priv->wordlen - 1) << 7;
chconf |= OMAP3_MCSPI_CHCONF_TRM_TX_ONLY;
chconf |= OMAP3_MCSPI_CHCONF_FORCE;
omap3_spi_write_chconf(priv, chconf);
for (i = 0; i < len; i++) {
/* wait till TX register is empty (TXS == 1) */
start = get_timer(0);
while (!(readl(&priv->regs->channel[priv->cs].chstat) &
OMAP3_MCSPI_CHSTAT_TXS)) {
if (get_timer(start) > SPI_WAIT_TIMEOUT) {
printf("SPI TXS timed out, status=0x%08x\n",
readl(&priv->regs->channel[priv->cs].chstat));
return -1;
}
}
/* Write the data */
unsigned int *tx = &priv->regs->channel[priv->cs].tx;
if (priv->wordlen > 16)
writel(((u32 *)txp)[i], tx);
else if (priv->wordlen > 8)
writel(((u16 *)txp)[i], tx);
else
writel(((u8 *)txp)[i], tx);
}
/* wait to finish of transfer */
while ((readl(&priv->regs->channel[priv->cs].chstat) &
(OMAP3_MCSPI_CHSTAT_EOT | OMAP3_MCSPI_CHSTAT_TXS)) !=
(OMAP3_MCSPI_CHSTAT_EOT | OMAP3_MCSPI_CHSTAT_TXS))
;
/* Disable the channel otherwise the next immediate RX will get affected */
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_DIS);
if (flags & SPI_XFER_END) {
chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
omap3_spi_write_chconf(priv, chconf);
}
return 0;
}
static int omap3_spi_read(struct omap3_spi_priv *priv, unsigned int len,
void *rxp, unsigned long flags)
{
int i, chconf;
ulong start;
chconf = readl(&priv->regs->channel[priv->cs].chconf);
/* Enable the channel */
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_EN);
chconf &= ~(OMAP3_MCSPI_CHCONF_TRM_MASK | OMAP3_MCSPI_CHCONF_WL_MASK);
chconf |= (priv->wordlen - 1) << 7;
chconf |= OMAP3_MCSPI_CHCONF_TRM_RX_ONLY;
chconf |= OMAP3_MCSPI_CHCONF_FORCE;
omap3_spi_write_chconf(priv, chconf);
writel(0, &priv->regs->channel[priv->cs].tx);
for (i = 0; i < len; i++) {
start = get_timer(0);
/* Wait till RX register contains data (RXS == 1) */
while (!(readl(&priv->regs->channel[priv->cs].chstat) &
OMAP3_MCSPI_CHSTAT_RXS)) {
if (get_timer(start) > SPI_WAIT_TIMEOUT) {
printf("SPI RXS timed out, status=0x%08x\n",
readl(&priv->regs->channel[priv->cs].chstat));
return -1;
}
}
/* Disable the channel to prevent furher receiving */
if (i == (len - 1))
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_DIS);
/* Read the data */
unsigned int *rx = &priv->regs->channel[priv->cs].rx;
if (priv->wordlen > 16)
((u32 *)rxp)[i] = readl(rx);
else if (priv->wordlen > 8)
((u16 *)rxp)[i] = (u16)readl(rx);
else
((u8 *)rxp)[i] = (u8)readl(rx);
}
if (flags & SPI_XFER_END) {
chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
omap3_spi_write_chconf(priv, chconf);
}
return 0;
}
/*McSPI Transmit Receive Mode*/
static int omap3_spi_txrx(struct omap3_spi_priv *priv, unsigned int len,
const void *txp, void *rxp, unsigned long flags)
{
ulong start;
int chconf, i = 0;
chconf = readl(&priv->regs->channel[priv->cs].chconf);
/*Enable SPI channel*/
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_EN);
/*set TRANSMIT-RECEIVE Mode*/
chconf &= ~(OMAP3_MCSPI_CHCONF_TRM_MASK | OMAP3_MCSPI_CHCONF_WL_MASK);
chconf |= (priv->wordlen - 1) << 7;
chconf |= OMAP3_MCSPI_CHCONF_FORCE;
omap3_spi_write_chconf(priv, chconf);
/*Shift in and out 1 byte at time*/
for (i=0; i < len; i++){
/* Write: wait for TX empty (TXS == 1)*/
start = get_timer(0);
while (!(readl(&priv->regs->channel[priv->cs].chstat) &
OMAP3_MCSPI_CHSTAT_TXS)) {
if (get_timer(start) > SPI_WAIT_TIMEOUT) {
printf("SPI TXS timed out, status=0x%08x\n",
readl(&priv->regs->channel[priv->cs].chstat));
return -1;
}
}
/* Write the data */
unsigned int *tx = &priv->regs->channel[priv->cs].tx;
if (priv->wordlen > 16)
writel(((u32 *)txp)[i], tx);
else if (priv->wordlen > 8)
writel(((u16 *)txp)[i], tx);
else
writel(((u8 *)txp)[i], tx);
/*Read: wait for RX containing data (RXS == 1)*/
start = get_timer(0);
while (!(readl(&priv->regs->channel[priv->cs].chstat) &
OMAP3_MCSPI_CHSTAT_RXS)) {
if (get_timer(start) > SPI_WAIT_TIMEOUT) {
printf("SPI RXS timed out, status=0x%08x\n",
readl(&priv->regs->channel[priv->cs].chstat));
return -1;
}
}
/* Read the data */
unsigned int *rx = &priv->regs->channel[priv->cs].rx;
if (priv->wordlen > 16)
((u32 *)rxp)[i] = readl(rx);
else if (priv->wordlen > 8)
((u16 *)rxp)[i] = (u16)readl(rx);
else
((u8 *)rxp)[i] = (u8)readl(rx);
}
/* Disable the channel */
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_DIS);
/*if transfer must be terminated disable the channel*/
if (flags & SPI_XFER_END) {
chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
omap3_spi_write_chconf(priv, chconf);
}
return 0;
}
static int _spi_xfer(struct omap3_spi_priv *priv, unsigned int bitlen,
const void *dout, void *din, unsigned long flags)
{
unsigned int len;
int ret = -1;
if (priv->wordlen < 4 || priv->wordlen > 32) {
printf("omap3_spi: invalid wordlen %d\n", priv->wordlen);
return -1;
}
if (bitlen % priv->wordlen)
return -1;
len = bitlen / priv->wordlen;
if (bitlen == 0) { /* only change CS */
int chconf = readl(&priv->regs->channel[priv->cs].chconf);
if (flags & SPI_XFER_BEGIN) {
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_EN);
chconf |= OMAP3_MCSPI_CHCONF_FORCE;
omap3_spi_write_chconf(priv, chconf);
}
if (flags & SPI_XFER_END) {
chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
omap3_spi_write_chconf(priv, chconf);
omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_DIS);
}
ret = 0;
} else {
if (dout != NULL && din != NULL)
ret = omap3_spi_txrx(priv, len, dout, din, flags);
else if (dout != NULL)
ret = omap3_spi_write(priv, len, dout, flags);
else if (din != NULL)
ret = omap3_spi_read(priv, len, din, flags);
}
return ret;
}
static void _omap3_spi_set_speed(struct omap3_spi_priv *priv)
{
uint32_t confr, div = 0;
confr = readl(&priv->regs->channel[priv->cs].chconf);
/* Calculate clock divisor. Valid range: 0x0 - 0xC ( /1 - /4096 ) */
if (priv->freq) {
while (div <= 0xC && (OMAP3_MCSPI_MAX_FREQ / (1 << div))
> priv->freq)
div++;
} else {
div = 0xC;
}
/* set clock divisor */
confr &= ~OMAP3_MCSPI_CHCONF_CLKD_MASK;
confr |= div << 2;
omap3_spi_write_chconf(priv, confr);
}
static void _omap3_spi_set_mode(struct omap3_spi_priv *priv)
{
uint32_t confr;
confr = readl(&priv->regs->channel[priv->cs].chconf);
/* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS
* REVISIT: this controller could support SPI_3WIRE mode.
*/
if (priv->pin_dir == MCSPI_PINDIR_D0_IN_D1_OUT) {
confr &= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1);
confr |= OMAP3_MCSPI_CHCONF_DPE0;
} else {
confr &= ~OMAP3_MCSPI_CHCONF_DPE0;
confr |= OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1;
}
/* set SPI mode 0..3 */
confr &= ~(OMAP3_MCSPI_CHCONF_POL | OMAP3_MCSPI_CHCONF_PHA);
if (priv->mode & SPI_CPHA)
confr |= OMAP3_MCSPI_CHCONF_PHA;
if (priv->mode & SPI_CPOL)
confr |= OMAP3_MCSPI_CHCONF_POL;
/* set chipselect polarity; manage with FORCE */
if (!(priv->mode & SPI_CS_HIGH))
confr |= OMAP3_MCSPI_CHCONF_EPOL; /* active-low; normal */
else
confr &= ~OMAP3_MCSPI_CHCONF_EPOL;
/* Transmit & receive mode */
confr &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
omap3_spi_write_chconf(priv, confr);
}
static void _omap3_spi_set_wordlen(struct omap3_spi_priv *priv)
{
unsigned int confr;
/* McSPI individual channel configuration */
confr = readl(&priv->regs->channel[priv->cs].chconf);
/* wordlength */
confr &= ~OMAP3_MCSPI_CHCONF_WL_MASK;
confr |= (priv->wordlen - 1) << 7;
omap3_spi_write_chconf(priv, confr);
}
static void spi_reset(struct mcspi *regs)
{
unsigned int tmp;
writel(OMAP3_MCSPI_SYSCONFIG_SOFTRESET, &regs->sysconfig);
do {
tmp = readl(&regs->sysstatus);
} while (!(tmp & OMAP3_MCSPI_SYSSTATUS_RESETDONE));
writel(OMAP3_MCSPI_SYSCONFIG_AUTOIDLE |
OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP |
OMAP3_MCSPI_SYSCONFIG_SMARTIDLE, &regs->sysconfig);
writel(OMAP3_MCSPI_WAKEUPENABLE_WKEN, &regs->wakeupenable);
}
static void _omap3_spi_claim_bus(struct omap3_spi_priv *priv)
{
unsigned int conf;
/*
* setup when switching from (reset default) slave mode
* to single-channel master mode
*/
conf = readl(&priv->regs->modulctrl);
conf &= ~(OMAP3_MCSPI_MODULCTRL_STEST | OMAP3_MCSPI_MODULCTRL_MS);
conf |= OMAP3_MCSPI_MODULCTRL_SINGLE;
writel(conf, &priv->regs->modulctrl);
}
static int omap3_spi_claim_bus(struct udevice *dev)
{
struct udevice *bus = dev->parent;
struct omap3_spi_priv *priv = dev_get_priv(bus);
struct dm_spi_slave_platdata *slave_plat = dev_get_parent_plat(dev);
priv->cs = slave_plat->cs;
priv->freq = slave_plat->max_hz;
_omap3_spi_claim_bus(priv);
return 0;
}
static int omap3_spi_release_bus(struct udevice *dev)
{
struct udevice *bus = dev->parent;
struct omap3_spi_priv *priv = dev_get_priv(bus);
writel(OMAP3_MCSPI_MODULCTRL_MS, &priv->regs->modulctrl);
return 0;
}
static int omap3_spi_set_wordlen(struct udevice *dev, unsigned int wordlen)
{
struct udevice *bus = dev->parent;
struct omap3_spi_priv *priv = dev_get_priv(bus);
struct dm_spi_slave_platdata *slave_plat = dev_get_parent_plat(dev);
priv->cs = slave_plat->cs;
priv->wordlen = wordlen;
_omap3_spi_set_wordlen(priv);
return 0;
}
static int omap3_spi_probe(struct udevice *dev)
{
struct omap3_spi_priv *priv = dev_get_priv(dev);
struct omap3_spi_plat *plat = dev_get_platdata(dev);
priv->regs = plat->regs;
priv->pin_dir = plat->pin_dir;
priv->wordlen = SPI_DEFAULT_WORDLEN;
spi_reset(priv->regs);
return 0;
}
static int omap3_spi_xfer(struct udevice *dev, unsigned int bitlen,
const void *dout, void *din, unsigned long flags)
{
struct udevice *bus = dev->parent;
struct omap3_spi_priv *priv = dev_get_priv(bus);
return _spi_xfer(priv, bitlen, dout, din, flags);
}
static int omap3_spi_set_speed(struct udevice *dev, unsigned int speed)
{
struct omap3_spi_priv *priv = dev_get_priv(dev);
priv->freq = speed;
_omap3_spi_set_speed(priv);
return 0;
}
static int omap3_spi_set_mode(struct udevice *dev, uint mode)
{
struct omap3_spi_priv *priv = dev_get_priv(dev);
priv->mode = mode;
_omap3_spi_set_mode(priv);
return 0;
}
static const struct dm_spi_ops omap3_spi_ops = {
.claim_bus = omap3_spi_claim_bus,
.release_bus = omap3_spi_release_bus,
.set_wordlen = omap3_spi_set_wordlen,
.xfer = omap3_spi_xfer,
.set_speed = omap3_spi_set_speed,
.set_mode = omap3_spi_set_mode,
/*
* cs_info is not needed, since we require all chip selects to be
* in the device tree explicitly
*/
};
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
static struct omap2_mcspi_platform_config omap2_pdata = {
.regs_offset = 0,
};
static struct omap2_mcspi_platform_config omap4_pdata = {
.regs_offset = OMAP4_MCSPI_REG_OFFSET,
};
static int omap3_spi_ofdata_to_platdata(struct udevice *dev)
{
struct omap2_mcspi_platform_config *data =
(struct omap2_mcspi_platform_config *)dev_get_driver_data(dev);
struct omap3_spi_plat *plat = dev_get_platdata(dev);
plat->regs = (struct mcspi *)(dev_read_addr(dev) + data->regs_offset);
if (dev_read_bool(dev, "ti,pindir-d0-out-d1-in"))
plat->pin_dir = MCSPI_PINDIR_D0_OUT_D1_IN;
else
plat->pin_dir = MCSPI_PINDIR_D0_IN_D1_OUT;
return 0;
}
static const struct udevice_id omap3_spi_ids[] = {
{ .compatible = "ti,omap2-mcspi", .data = (ulong)&omap2_pdata },
{ .compatible = "ti,omap4-mcspi", .data = (ulong)&omap4_pdata },
{ }
};
#endif
U_BOOT_DRIVER(omap3_spi) = {
.name = "omap3_spi",
.id = UCLASS_SPI,
.flags = DM_FLAG_PRE_RELOC,
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
.of_match = omap3_spi_ids,
.ofdata_to_platdata = omap3_spi_ofdata_to_platdata,
.plat_auto = sizeof(struct omap3_spi_plat),
#endif
.probe = omap3_spi_probe,
.ops = &omap3_spi_ops,
.priv_auto = sizeof(struct omap3_spi_priv),
};