mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-31 14:28:52 +09:00
![Patrice Chotard](/assets/img/avatar_default.png)
This board offers: _ STM32F746NGH6 microcontroller with 1 Mbyte Flash and 320+4 Kbytes RAM _ Six 5 V power supply options: Power jack ST-LINK/V2-1 USB connector User USB HS connector User USB FS1 connector User USB FS2 connector Daughterboard _ SAI Audio DAC, stereo audio jack which supports headset with microphone _ Stereo digital microphone, audio jack connector used to connect external speakers _ 2 Gbytes (or more) SDMMC interface microSD card _ RF-EEPROM on I2C compatible serial interface _ RS-232 communication _ IrDA transceiver _ JTAG/SWD and ETM trace debug support, ST-LINK/V2-1 embedded _ IEEE-802.3-2002 compliant Ethernet connector _ Camera module _ 8Mx32 bit SDRAM, 1Mx16 bit SRAM & 8Mx16 bit Nor Flash _ 512 Mbits QuadSPI Nor Flash _ 5.7 inch 640x480 pixel TFT color LCD with capacitive touch panel _ Joystick with 4-direction control and selector _ Reset, WakeUp/Tamper or key button _ 4 color user LEDs _ Extension connectors & memory connectors for daughterboard or wrapping board _ USB OTG HS and FS with Micro-AB connectors _ RTC with backup battery _ CAN 2.0A/B compliant connection _ Potentiometer _ Motor control connector More detailed information are available here : http://www.st.com/en/evaluation-tools/stm32746g-eval.html To compile stm32f746-eval board, use same defconfig as stm32f746-disco, the only difference is to pass "DEVICE_TREE=stm32746g-eval". Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Vikas Manocha <vikas.manocha@st.com>
241 lines
7.4 KiB
Plaintext
241 lines
7.4 KiB
Plaintext
/*
|
|
* Copyright 2018 - Christophe Priouzeau <christophe.priouzeau@st.com>
|
|
*
|
|
* Based on:
|
|
* stm32f746-disco.dts from U-boot 2018.01
|
|
* Copyright 2016 - Lee Jones <lee.jones@linaro.org>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "stm32f746.dtsi"
|
|
#include <dt-bindings/memory/stm32-sdram.h>
|
|
|
|
/ {
|
|
model = "STMicroelectronics STM32F746G-EVAL board";
|
|
compatible = "st,stm32f746g-eval", "st,stm32f746";
|
|
|
|
chosen {
|
|
bootargs = "root=/dev/mmcblk0p1 rw rootwait";
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory {
|
|
reg = <0xC0000000 0x2000000>;
|
|
};
|
|
|
|
aliases {
|
|
serial0 = &usart1;
|
|
spi0 = &qspi;
|
|
mmc0 = &sdio;
|
|
/* Aliases for gpios so as to use sequence */
|
|
gpio0 = &gpioa;
|
|
gpio1 = &gpiob;
|
|
gpio2 = &gpioc;
|
|
gpio3 = &gpiod;
|
|
gpio4 = &gpioe;
|
|
gpio5 = &gpiof;
|
|
gpio6 = &gpiog;
|
|
gpio7 = &gpioh;
|
|
gpio8 = &gpioi;
|
|
gpio9 = &gpioj;
|
|
gpio10 = &gpiok;
|
|
};
|
|
|
|
led1 {
|
|
compatible = "st,led1";
|
|
led-gpio = <&gpiof 10 0>;
|
|
};
|
|
|
|
button1 {
|
|
compatible = "st,button1";
|
|
button-gpio = <&gpioc 13 0>;
|
|
};
|
|
};
|
|
|
|
&clk_hse {
|
|
clock-frequency = <25000000>;
|
|
};
|
|
|
|
&pinctrl {
|
|
usart1_pins_a: usart1@0 {
|
|
pins1 {
|
|
pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
|
|
bias-disable;
|
|
drive-push-pull;
|
|
slew-rate = <2>;
|
|
};
|
|
pins2 {
|
|
pinmux = <STM32F746_PA10_FUNC_USART1_RX>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
ethernet_mii: mii@0 {
|
|
pins {
|
|
pinmux = <STM32F746_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
|
|
<STM32F746_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
|
|
<STM32F746_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
|
|
<STM32F746_PA2_FUNC_ETH_MDIO>,
|
|
<STM32F746_PC1_FUNC_ETH_MDC>,
|
|
<STM32F746_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
|
|
<STM32F746_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
|
|
<STM32F746_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
|
|
<STM32F746_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>;
|
|
slew-rate = <2>;
|
|
};
|
|
};
|
|
|
|
fmc_pins: fmc@0 {
|
|
pins {
|
|
pinmux = <STM32F746_PI10_FUNC_FMC_D31>, /* FMC_D31 */
|
|
<STM32F746_PI9_FUNC_FMC_D30>, /* FMC_D30*/
|
|
<STM32F746_PI7_FUNC_FMC_D29>, /* FMC_D29 */
|
|
<STM32F746_PI6_FUNC_FMC_D28>, /* FMC_D28 */
|
|
<STM32F746_PI3_FUNC_FMC_D27>, /* FMC_D27 */
|
|
<STM32F746_PI2_FUNC_FMC_D26>, /* FMC_D26 */
|
|
<STM32F746_PI1_FUNC_FMC_D25>, /* FMC_D25 */
|
|
<STM32F746_PI0_FUNC_FMC_D24>, /* FMC_D24 */
|
|
<STM32F746_PH15_FUNC_FMC_D23>, /* FMC_D23 */
|
|
<STM32F746_PH14_FUNC_FMC_D22>, /* FMC_D22 */
|
|
<STM32F746_PH13_FUNC_FMC_D21>, /* FMC_D21 */
|
|
<STM32F746_PH12_FUNC_FMC_D20>, /* FMC_D20 */
|
|
<STM32F746_PH11_FUNC_FMC_D19>, /* FMC_D19 */
|
|
<STM32F746_PH10_FUNC_FMC_D18>, /* FMC_D18 */
|
|
<STM32F746_PH9_FUNC_FMC_D17>, /* FMC_D17 */
|
|
<STM32F746_PH8_FUNC_FMC_D16>, /* FMC_D16 */
|
|
|
|
<STM32F746_PD10_FUNC_FMC_D15>, /* FMC_D15 */
|
|
<STM32F746_PD9_FUNC_FMC_D14>, /* FMC_D14*/
|
|
<STM32F746_PD8_FUNC_FMC_D13>, /* FMC_D13 */
|
|
<STM32F746_PE15_FUNC_FMC_D12>,/* FMC_D12 */
|
|
<STM32F746_PE14_FUNC_FMC_D11>,/* FMC_D11 */
|
|
<STM32F746_PE13_FUNC_FMC_D10>,/* FMC_D10 */
|
|
<STM32F746_PE12_FUNC_FMC_D9>, /* FMC_D9 */
|
|
<STM32F746_PE11_FUNC_FMC_D8>, /* FMC_D8 */
|
|
<STM32F746_PE10_FUNC_FMC_D7>, /* FMC_D7 */
|
|
<STM32F746_PE9_FUNC_FMC_D6>, /* FMC_D6 */
|
|
<STM32F746_PE8_FUNC_FMC_D5>, /* FMC_D5*/
|
|
<STM32F746_PE7_FUNC_FMC_D4>, /* FMC_D4 */
|
|
<STM32F746_PD1_FUNC_FMC_D3>, /* FMC_D3 */
|
|
<STM32F746_PD0_FUNC_FMC_D2>, /* FMC_D2 */
|
|
<STM32F746_PD15_FUNC_FMC_D1>, /* FMC_D1 */
|
|
<STM32F746_PD14_FUNC_FMC_D0>, /* FMC_D0 */
|
|
|
|
<STM32F746_PI5_FUNC_FMC_NBL3>, /* FMC_NBL3 */
|
|
<STM32F746_PI4_FUNC_FMC_NBL2>, /* FMC_NBL2 */
|
|
<STM32F746_PE1_FUNC_FMC_NBL1>, /* FMC_NBL1 */
|
|
<STM32F746_PE0_FUNC_FMC_NBL0>, /* FMC_NBL0 */
|
|
|
|
<STM32F746_PG5_FUNC_FMC_A15_FMC_BA1>, /* FMC_A15 FMC_BA1 */
|
|
<STM32F746_PG4_FUNC_FMC_A14_FMC_BA0>, /* FMC_A14 FMC_BA0*/
|
|
|
|
<STM32F746_PG1_FUNC_FMC_A11>, /* FMC_A11 */
|
|
<STM32F746_PG0_FUNC_FMC_A10>, /* FMC_A10 */
|
|
<STM32F746_PF15_FUNC_FMC_A9>, /* FMC_A9 */
|
|
<STM32F746_PF14_FUNC_FMC_A8>, /* FMC_A8 */
|
|
<STM32F746_PF13_FUNC_FMC_A7>, /* FMC_A7 */
|
|
<STM32F746_PF12_FUNC_FMC_A6>, /* FMC_A6 */
|
|
<STM32F746_PF5_FUNC_FMC_A5>, /* FUNC_FMC_A5 */
|
|
<STM32F746_PF4_FUNC_FMC_A4>, /* FMC_A4 */
|
|
<STM32F746_PF3_FUNC_FMC_A3>, /* FMC_A3 */
|
|
<STM32F746_PF2_FUNC_FMC_A2>, /* FMC_A2 */
|
|
<STM32F746_PF1_FUNC_FMC_A1>, /* FMC_A1 */
|
|
<STM32F746_PF0_FUNC_FMC_A0>, /* FMC_A0 */
|
|
|
|
<STM32F746_PH3_FUNC_FMC_SDNE0>,/* FMC_SDNE0 */
|
|
<STM32F746_PH5_FUNC_FMC_SDNWE>, /* FMC_SDNWE */
|
|
<STM32F746_PF11_FUNC_FMC_SDNRAS>, /* FMC_SDNRAS */
|
|
<STM32F746_PG15_FUNC_FMC_SDNCAS>, /* FMC_SDNCAS */
|
|
<STM32F746_PH2_FUNC_FMC_SDCKE0>, /* FMC_SDCKE0 */
|
|
<STM32F746_PG8_FUNC_FMC_SDCLK>; /* FMC_SDCLK */
|
|
slew-rate = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usart1 {
|
|
pinctrl-0 = <&usart1_pins_a>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&mac {
|
|
status = "okay";
|
|
pinctrl-0 = <ðernet_mii>;
|
|
phy-mode = "rmii";
|
|
phy-handle = <&phy0>;
|
|
|
|
mdio0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,dwmac-mdio";
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&fmc {
|
|
pinctrl-0 = <&fmc_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
/*
|
|
* Memory configuration from sdram datasheet IS42S32800G-6BLI
|
|
*/
|
|
bank1: bank@0 {
|
|
st,sdram-control = /bits/ 8 <NO_COL_9 NO_ROW_12 MWIDTH_32 BANKS_4
|
|
CAS_2 SDCLK_3 RD_BURST_EN RD_PIPE_DL_0>;
|
|
st,sdram-timing = /bits/ 8 <TMRD_1 TXSR_1 TRAS_1 TRC_6 TRP_2
|
|
TWR_1 TRCD_1>;
|
|
st,sdram-refcount = <1539>;
|
|
};
|
|
};
|
|
|
|
&sdio {
|
|
status = "okay";
|
|
pinctrl-names = "default", "opendrain";
|
|
pinctrl-0 = <&sdio_pins>;
|
|
pinctrl-1 = <&sdio_pins_od>;
|
|
bus-width = <4>;
|
|
max-frequency = <25000000>;
|
|
};
|