mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-19 00:18:51 +09:00
![]() This patch adds a unified s3c24x0 cpu header file that selects the header file for the specific s3c24x0 cpu from the SOC and CPU configs defined in board config file. This removes the current chain of s3c24-type #ifdef's from the s3c24x0 code. Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> |
||
---|---|---|
.. | ||
auto_update.c | ||
cmd_trab.c | ||
config.mk | ||
flash.c | ||
lowlevel_init.S | ||
Makefile | ||
memory.c | ||
Pt1000_temp_data.h | ||
README.kbd | ||
rs485.c | ||
rs485.h | ||
trab_fkt.c | ||
trab.c | ||
tsc2000.c | ||
tsc2000.h | ||
u-boot.lds | ||
vfd.c |
The TRAB keyboard implementation is similar to that for LWMON and R360MPI boards. The only difference concerns key naming. There are 4 keys on TRAB: 1, 2, 3, 4. 1) The "kbd" command provides information about the current state of the keys. For example, TRAB # kbd Keys: 1 0 1 0 means that keys 1 and 3 are pressed. The keyboard status is also stored in the "keybd" environment variable. In this example we get keybd=1010 2) The "preboot" variable is set according to current environment settings and keys pressed. This is an example: TRAB # setenv magic_keys XY TRAB # setenv key_magicX 12 TRAB # setenv key_cmdX echo ## Keys 1 + 2 pressed ##\;echo TRAB # setenv key_magicY 13 TRAB # setenv key_cmdY echo ## Keys 1 + 3 pressed ##\;echo Here "magic_keys=XY" means that the "key_magicX" and "key_magicY" variables will be checked for a match. Each variable "key_magic*" defines a set of keys. In the our example, if keys 1 and 3 are pressed during reset, then "key_magicY" matches, so the "preboot" variable will be set to the contents of "key_cmdY": preboot=echo ## Keys 1 + 3 pressed ##;echo 3) The TRAB board has optional modem support. When a certain key combination is pressed on the keyboard at power-on, the firmware performs the necessary initialization of the modem and allows for dial-in. The key combination is specified in the "include/configs/trab.h" file. For example: #define CONFIG_MODEM_KEY_MAGIC "23" means that modem will be initialized if and only if both keys 2, 3 are pressed. Note that the format of this string is similar to the format of "key_magic*" environment variables described above.