mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-31 22:39:08 +09:00
![Masahiro Yamada](/assets/img/avatar_default.png)
We do not have to define CONFIG_MPC5xxx in board config headers (and start.S) because it is defined in arch/powerpc/cpu/mpc5xxx/config.mk. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
387 lines
12 KiB
C
387 lines
12 KiB
C
/*
|
|
* (C) Copyright 2003-2004
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2004
|
|
* Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* Check valid setting of revision define.
|
|
* Total5100 and Total5200 Rev.1 are identical except for the processor.
|
|
*/
|
|
#if (CONFIG_TOTAL5200_REV!=1 && CONFIG_TOTAL5200_REV!=2)
|
|
#error CONFIG_TOTAL5200_REV must be 1 or 2
|
|
#endif
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
|
|
#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */
|
|
#define CONFIG_TOTAL5200 1 /* ... on Total5200 board */
|
|
|
|
/*
|
|
* Valid values for CONFIG_SYS_TEXT_BASE are:
|
|
* 0xFFF00000 boot high (standard configuration)
|
|
* 0xFE000000 boot low
|
|
* 0x00100000 boot from RAM (for testing only)
|
|
*/
|
|
#ifndef CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_TEXT_BASE 0xFFF00000
|
|
#endif
|
|
|
|
#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
|
|
|
|
#define CONFIG_HIGH_BATS 1 /* High BATs supported */
|
|
|
|
/*
|
|
* Serial console configuration
|
|
*/
|
|
#define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 */
|
|
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
|
|
|
|
/*
|
|
* Video console
|
|
*/
|
|
#define CONFIG_VIDEO
|
|
#define CONFIG_VIDEO_SED13806
|
|
#define CONFIG_VIDEO_SED13806_16BPP
|
|
|
|
#define CONFIG_CFB_CONSOLE
|
|
#define CONFIG_VIDEO_LOGO
|
|
/* #define CONFIG_VIDEO_BMP_LOGO */
|
|
#define CONFIG_CONSOLE_EXTRA_INFO
|
|
#define CONFIG_VGA_AS_SINGLE_DEVICE
|
|
#define CONFIG_VIDEO_SW_CURSOR
|
|
#define CONFIG_SPLASH_SCREEN
|
|
|
|
|
|
/*
|
|
* PCI Mapping:
|
|
* 0x40000000 - 0x4fffffff - PCI Memory
|
|
* 0x50000000 - 0x50ffffff - PCI IO Space
|
|
*/
|
|
#define CONFIG_PCI 1
|
|
#define CONFIG_PCI_PNP 1
|
|
#define CONFIG_PCI_SCAN_SHOW 1
|
|
#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
|
|
|
|
#define CONFIG_PCI_MEM_BUS 0x40000000
|
|
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
|
|
#define CONFIG_PCI_MEM_SIZE 0x10000000
|
|
|
|
#define CONFIG_PCI_IO_BUS 0x50000000
|
|
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
|
|
#define CONFIG_PCI_IO_SIZE 0x01000000
|
|
|
|
#define CONFIG_MII 1
|
|
#define CONFIG_EEPRO100 1
|
|
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
|
|
#define CONFIG_NS8382X 1
|
|
|
|
/* Partitions */
|
|
#define CONFIG_MAC_PARTITION
|
|
#define CONFIG_DOS_PARTITION
|
|
|
|
/* USB */
|
|
#define CONFIG_USB_OHCI
|
|
#define CONFIG_USB_STORAGE
|
|
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_PCI
|
|
|
|
#define CONFIG_CMD_BMP
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_IDE
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_USB
|
|
|
|
|
|
#if (CONFIG_SYS_TEXT_BASE == 0xFE000000) /* Boot low */
|
|
# define CONFIG_SYS_LOWBOOT 1
|
|
#endif
|
|
|
|
/*
|
|
* Autobooting
|
|
*/
|
|
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
|
|
|
|
#define CONFIG_PREBOOT \
|
|
"setenv stdout serial;setenv stderr serial;" \
|
|
"echo;" \
|
|
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
|
|
"echo"
|
|
|
|
#undef CONFIG_BOOTARGS
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"netdev=eth0\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rootpath}\0" \
|
|
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
|
"addip=setenv bootargs ${bootargs} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
|
":${hostname}:${netdev}:off panic=1\0" \
|
|
"flash_nfs=run nfsargs addip;" \
|
|
"bootm ${kernel_addr}\0" \
|
|
"flash_self=run ramargs addip;" \
|
|
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
|
|
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
|
|
"rootpath=/opt/eldk/ppc_82xx\0" \
|
|
"bootfile=/tftpboot/MPC5200/uImage\0" \
|
|
""
|
|
|
|
#define CONFIG_BOOTCOMMAND "run flash_self"
|
|
|
|
/*
|
|
* IPB Bus clocking configuration.
|
|
*/
|
|
#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
|
|
|
|
/*
|
|
* I2C configuration
|
|
*/
|
|
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
|
|
#define CONFIG_SYS_I2C_MODULE 1 /* Select I2C module #1 or #2 */
|
|
|
|
#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
|
|
#define CONFIG_SYS_I2C_SLAVE 0x7F
|
|
|
|
/*
|
|
* EEPROM configuration
|
|
*/
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70
|
|
|
|
/*
|
|
* Flash configuration
|
|
*/
|
|
#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
|
|
#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
|
|
#if CONFIG_TOTAL5200_REV==2
|
|
# define CONFIG_SYS_MAX_FLASH_BANKS 3 /* max num of flash banks */
|
|
# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS5_START, CONFIG_SYS_CS4_START, CONFIG_SYS_BOOTCS_START }
|
|
#else
|
|
# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
|
|
# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_BOOTCS_START }
|
|
#endif
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */
|
|
|
|
#if CONFIG_TOTAL5200_REV==1
|
|
# define CONFIG_SYS_FLASH_BASE 0xFE000000
|
|
# define CONFIG_SYS_FLASH_SIZE 0x02000000
|
|
#elif CONFIG_TOTAL5200_REV==2
|
|
# define CONFIG_SYS_FLASH_BASE 0xFA000000
|
|
# define CONFIG_SYS_FLASH_SIZE 0x06000000
|
|
#endif /* CONFIG_TOTAL5200_REV */
|
|
|
|
#if defined(CONFIG_SYS_LOWBOOT)
|
|
# define CONFIG_ENV_ADDR 0xFE040000
|
|
#else /* CONFIG_SYS_LOWBOOT */
|
|
# define CONFIG_ENV_ADDR 0xFFF40000
|
|
#endif /* CONFIG_SYS_LOWBOOT */
|
|
|
|
/*
|
|
* Environment settings
|
|
*/
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
#define CONFIG_ENV_SIZE 0x40000
|
|
#define CONFIG_ENV_SECT_SIZE 0x40000
|
|
#define CONFIG_ENV_OVERWRITE 1
|
|
|
|
/*
|
|
* Memory map
|
|
*/
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
|
|
#define CONFIG_SYS_MBAR 0xF0000000 /* 64 kB */
|
|
#define CONFIG_SYS_FPGA_BASE 0xF0010000 /* 64 kB */
|
|
#define CONFIG_SYS_CPLD_BASE 0xF0020000 /* 64 kB */
|
|
#define CONFIG_SYS_LCD_BASE 0xF1000000 /* 4096 kB */
|
|
|
|
/* Use SRAM until RAM will be available */
|
|
#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
|
|
#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */
|
|
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
|
|
# define CONFIG_SYS_RAMBOOT 1
|
|
#endif
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
|
|
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
/*
|
|
* Ethernet configuration
|
|
*/
|
|
#define CONFIG_MPC5xxx_FEC 1
|
|
#define CONFIG_MPC5xxx_FEC_SEVENWIRE
|
|
/* dummy, 7-wire FEC does not have phy address */
|
|
#define CONFIG_PHY_ADDR 0x00
|
|
|
|
/*
|
|
* GPIO configuration
|
|
*
|
|
* CS1: SDRAM CS1 disabled, gpio_wkup_6 enabled 0
|
|
* Reserved 0
|
|
* ALTs: CAN1/2 on PSC2, SPI on PSC3 00
|
|
* CS7: Interrupt GPIO on PSC3_5 0
|
|
* CS8: Interrupt GPIO on PSC3_4 0
|
|
* ATA: reset default, changed in ATA driver 00
|
|
* IR_USB_CLK: IrDA/USB 48MHz clock gen. int., pin is GPIO 0
|
|
* IRDA: reset default, changed in IrDA driver 000
|
|
* ETHER: reset default, changed in Ethernet driver 0000
|
|
* PCI_DIS: reset default, changed in PCI driver 0
|
|
* USB_SE: reset default, changed in USB driver 0
|
|
* USB: reset default, changed in USB driver 00
|
|
* PSC3: SPI and UART functionality without CD 1100
|
|
* Reserved 0
|
|
* PSC2: CAN1/2 001
|
|
* Reserved 0
|
|
* PSC1: reset default, changed in AC'97 driver 000
|
|
*
|
|
*/
|
|
#define CONFIG_SYS_GPS_PORT_CONFIG 0x00000C10
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
|
|
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Various low-level settings
|
|
*/
|
|
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
|
|
#define CONFIG_SYS_HID0_FINAL HID0_ICE
|
|
|
|
#if CONFIG_TOTAL5200_REV==1
|
|
# define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
|
|
# define CONFIG_SYS_BOOTCS_SIZE 0x02000000 /* 32 MB */
|
|
# define CONFIG_SYS_BOOTCS_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */
|
|
# define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
|
|
# define CONFIG_SYS_CS0_SIZE 0x02000000 /* 32 MB */
|
|
#else
|
|
# define CONFIG_SYS_BOOTCS_START (CONFIG_SYS_CS4_START + CONFIG_SYS_CS4_SIZE)
|
|
# define CONFIG_SYS_BOOTCS_SIZE 0x02000000 /* 32 MB */
|
|
# define CONFIG_SYS_BOOTCS_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */
|
|
# define CONFIG_SYS_CS4_START (CONFIG_SYS_CS5_START + CONFIG_SYS_CS5_SIZE)
|
|
# define CONFIG_SYS_CS4_SIZE 0x02000000 /* 32 MB */
|
|
# define CONFIG_SYS_CS4_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */
|
|
# define CONFIG_SYS_CS5_START CONFIG_SYS_FLASH_BASE
|
|
# define CONFIG_SYS_CS5_SIZE 0x02000000 /* 32 MB */
|
|
# define CONFIG_SYS_CS5_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */
|
|
#endif
|
|
|
|
#define CONFIG_SYS_CS1_START CONFIG_SYS_FPGA_BASE
|
|
#define CONFIG_SYS_CS1_SIZE 0x00010000 /* 64 kB */
|
|
#define CONFIG_SYS_CS1_CFG 0x0019FF00 /* 25WS, MX, AL, AA, CE, AS_25, DS_32 */
|
|
|
|
#define CONFIG_SYS_CS2_START CONFIG_SYS_LCD_BASE
|
|
#define CONFIG_SYS_CS2_SIZE 0x00400000 /* 4096 kB */
|
|
#define CONFIG_SYS_CS2_CFG 0x0032FD0C /* 50WS, MX, AL, AA, CE, AS_25, DS_16, endian swapping */
|
|
|
|
#if CONFIG_TOTAL5200_REV==1
|
|
# define CONFIG_SYS_CS3_START CONFIG_SYS_CPLD_BASE
|
|
# define CONFIG_SYS_CS3_SIZE 0x00010000 /* 64 kB */
|
|
# define CONFIG_SYS_CS3_CFG 0x000ADF00 /* 10WS, MX, AL, CE, AS_25, DS_32 */
|
|
#else
|
|
# define CONFIG_SYS_CS3_START CONFIG_SYS_CPLD_BASE
|
|
# define CONFIG_SYS_CS3_SIZE 0x00010000 /* 64 kB */
|
|
# define CONFIG_SYS_CS3_CFG 0x000AD800 /* 10WS, MX, AL, CE, AS_24, DS_8 */
|
|
#endif
|
|
|
|
#define CONFIG_SYS_CS_BURST 0x00000000
|
|
#define CONFIG_SYS_CS_DEADCYCLE 0x33333333
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* USB stuff
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_USB_CLOCK 0x0001BBBB
|
|
#define CONFIG_USB_CONFIG 0x00001000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* IDE/ATA stuff Supports IDE harddisk
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
|
|
|
|
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
|
|
#undef CONFIG_IDE_LED /* LED for ide not supported */
|
|
|
|
#define CONFIG_IDE_RESET /* reset for ide supported */
|
|
#define CONFIG_IDE_PREINIT
|
|
|
|
#define CONFIG_SYS_ATA_CS_ON_I2C2
|
|
#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
|
|
#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
|
|
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
|
|
|
|
#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
|
|
|
|
/* Offset for data I/O */
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060)
|
|
|
|
/* Offset for normal register accesses */
|
|
#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)
|
|
|
|
/* Offset for alternate registers */
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C)
|
|
|
|
/* Interval between registers */
|
|
#define CONFIG_SYS_ATA_STRIDE 4
|
|
|
|
#endif /* __CONFIG_H */
|