u-boot-brain/arch/arm/mach-mvebu/include/mach/soc.h
Stefan Roese f4e6ec7dc6 arm: mvebu: Don't call arch_cpu_init() from SPL at all
This patch removes the call to arch_cpu_init() in the SPL U-Boot version.
As SPL does not need all the configuration done in this function. And
also does not need the reconfiguration of the internal register
address to 0xf1000000. This will be done by the main U-Boot later on.

This also fixes a problem with the timer not beeing initialized on AXP,
as needed for the mdelay in the setup_usb_phys(). This will now only
be called once in main U-Boot.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14 14:08:59 +01:00

99 lines
3.2 KiB
C

/*
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
*
* Header file for the Marvell's Feroceon CPU core.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _MVEBU_SOC_H
#define _MVEBU_SOC_H
#define SOC_MV78460_ID 0x7846
#define SOC_88F6810_ID 0x6810
#define SOC_88F6820_ID 0x6820
#define SOC_88F6828_ID 0x6828
/* A38x revisions */
#define MV_88F68XX_Z1_ID 0x0
#define MV_88F68XX_A0_ID 0x4
/* TCLK Core Clock definition */
#ifndef CONFIG_SYS_TCLK
#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
#endif
/* Armada XP PLL frequency (used for NAND clock generation) */
#define CONFIG_SYS_MVEBU_PLL_CLOCK 2000000000
/* SOC specific definations */
#define INTREG_BASE 0xd0000000
#define INTREG_BASE_ADDR_REG (INTREG_BASE + 0x20080)
#if defined(CONFIG_SPL_BUILD)
/*
* The SPL U-Boot version still runs with the default
* address for the internal registers, configured by
* the BootROM. Only the main U-Boot version uses the
* new internal register base address, that also is
* required for the Linux kernel.
*/
#define SOC_REGS_PHY_BASE 0xd0000000
#else
#define SOC_REGS_PHY_BASE 0xf1000000
#endif
#define MVEBU_REGISTER(x) (SOC_REGS_PHY_BASE + x)
#define MVEBU_SDRAM_SCRATCH (MVEBU_REGISTER(0x01504))
#define MVEBU_L2_CACHE_BASE (MVEBU_REGISTER(0x08000))
#define CONFIG_SYS_PL310_BASE MVEBU_L2_CACHE_BASE
#define MVEBU_TWSI_BASE (MVEBU_REGISTER(0x11000))
#define MVEBU_MPP_BASE (MVEBU_REGISTER(0x18000))
#define MVEBU_GPIO0_BASE (MVEBU_REGISTER(0x18100))
#define MVEBU_GPIO1_BASE (MVEBU_REGISTER(0x18140))
#define MVEBU_GPIO2_BASE (MVEBU_REGISTER(0x18180))
#define MVEBU_SYSTEM_REG_BASE (MVEBU_REGISTER(0x18200))
#define MVEBU_CLOCK_BASE (MVEBU_REGISTER(0x18700))
#define MVEBU_CPU_WIN_BASE (MVEBU_REGISTER(0x20000))
#define MVEBU_SDRAM_BASE (MVEBU_REGISTER(0x20180))
#define MVEBU_TIMER_BASE (MVEBU_REGISTER(0x20300))
#define MVEBU_REG_PCIE_BASE (MVEBU_REGISTER(0x40000))
#define MVEBU_AXP_USB_BASE (MVEBU_REGISTER(0x50000))
#define MVEBU_USB20_BASE (MVEBU_REGISTER(0x58000))
#define MVEBU_AXP_SATA_BASE (MVEBU_REGISTER(0xa0000))
#define MVEBU_SATA0_BASE (MVEBU_REGISTER(0xa8000))
#define MVEBU_NAND_BASE (MVEBU_REGISTER(0xd0000))
#define MVEBU_SDIO_BASE (MVEBU_REGISTER(0xd8000))
#define SOC_COHERENCY_FABRIC_CTRL_REG (MVEBU_REGISTER(0x20200))
#define MBUS_ERR_PROP_EN (1 << 8)
#define MBUS_BRIDGE_WIN_CTRL_REG (MVEBU_REGISTER(0x20250))
#define MBUS_BRIDGE_WIN_BASE_REG (MVEBU_REGISTER(0x20254))
#define MVEBU_SOC_DEV_MUX_REG (MVEBU_SYSTEM_REG_BASE + 0x08)
#define NAND_EN BIT(0)
#define NAND_ARBITER_EN BIT(27)
#define ARMADA_XP_PUP_ENABLE (MVEBU_SYSTEM_REG_BASE + 0x44c)
#define GE0_PUP_EN BIT(0)
#define GE1_PUP_EN BIT(1)
#define LCD_PUP_EN BIT(2)
#define NAND_PUP_EN BIT(4)
#define SPI_PUP_EN BIT(5)
#define MVEBU_CORE_DIV_CLK_CTRL(i) (MVEBU_CLOCK_BASE + ((i) * 0x8))
#define NAND_ECC_DIVCKL_RATIO_OFFS 8
#define NAND_ECC_DIVCKL_RATIO_MASK (0x3F << NAND_ECC_DIVCKL_RATIO_OFFS)
#define SDRAM_MAX_CS 4
#define SDRAM_ADDR_MASK 0xFF000000
/* MVEBU CPU memory windows */
#define MVCPU_WIN_CTRL_DATA CPU_WIN_CTRL_DATA
#define MVCPU_WIN_ENABLE CPU_WIN_ENABLE
#define MVCPU_WIN_DISABLE CPU_WIN_DISABLE
#endif /* _MVEBU_SOC_H */