mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-24 19:08:50 +09:00
![Oleksandr Tymoshenko](/assets/img/avatar_default.png)
Return value of rtl_send_common propogates unmodified all the way up to eth_send and further to API consumer if CONFIG_API is enabled. Previously rtl_send_common returned number of bytes sent on success which was erroneouly detected as error condition by API consumers that checked for operation success by comparing return value with 0. Switch rtl_send_common to use common convention: return 0 on success and negative value for failure. Cc: Stephen Warren <swarren@nvidia.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Oleksandr Tymoshenko <gonzo@bluezbox.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
1224 lines
30 KiB
C
1224 lines
30 KiB
C
/*
|
|
* rtl8169.c : U-Boot driver for the RealTek RTL8169
|
|
*
|
|
* Masami Komiya (mkomiya@sonare.it)
|
|
*
|
|
* Most part is taken from r8169.c of etherboot
|
|
*
|
|
*/
|
|
|
|
/**************************************************************************
|
|
* r8169.c: Etherboot device driver for the RealTek RTL-8169 Gigabit
|
|
* Written 2003 by Timothy Legge <tlegge@rogers.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*
|
|
* Portions of this code based on:
|
|
* r8169.c: A RealTek RTL-8169 Gigabit Ethernet driver
|
|
* for Linux kernel 2.4.x.
|
|
*
|
|
* Written 2002 ShuChen <shuchen@realtek.com.tw>
|
|
* See Linux Driver for full information
|
|
*
|
|
* Linux Driver Version 1.27a, 10.02.2002
|
|
*
|
|
* Thanks to:
|
|
* Jean Chen of RealTek Semiconductor Corp. for
|
|
* providing the evaluation NIC used to develop
|
|
* this driver. RealTek's support for Etherboot
|
|
* is appreciated.
|
|
*
|
|
* REVISION HISTORY:
|
|
* ================
|
|
*
|
|
* v1.0 11-26-2003 timlegge Initial port of Linux driver
|
|
* v1.5 01-17-2004 timlegge Initial driver output cleanup
|
|
*
|
|
* Indent Options: indent -kr -i8
|
|
***************************************************************************/
|
|
/*
|
|
* 26 August 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk>
|
|
* Modified to use le32_to_cpu and cpu_to_le32 properly
|
|
*/
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <malloc.h>
|
|
#include <memalign.h>
|
|
#include <net.h>
|
|
#ifndef CONFIG_DM_ETH
|
|
#include <netdev.h>
|
|
#endif
|
|
#include <asm/io.h>
|
|
#include <pci.h>
|
|
|
|
#undef DEBUG_RTL8169
|
|
#undef DEBUG_RTL8169_TX
|
|
#undef DEBUG_RTL8169_RX
|
|
|
|
#define drv_version "v1.5"
|
|
#define drv_date "01-17-2004"
|
|
|
|
static unsigned long ioaddr;
|
|
|
|
/* Condensed operations for readability. */
|
|
#define currticks() get_timer(0)
|
|
|
|
/* media options */
|
|
#define MAX_UNITS 8
|
|
static int media[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1 };
|
|
|
|
/* MAC address length*/
|
|
#define MAC_ADDR_LEN 6
|
|
|
|
/* max supported gigabit ethernet frame size -- must be at least (dev->mtu+14+4).*/
|
|
#define MAX_ETH_FRAME_SIZE 1536
|
|
|
|
#define TX_FIFO_THRESH 256 /* In bytes */
|
|
|
|
#define RX_FIFO_THRESH 7 /* 7 means NO threshold, Rx buffer level before first PCI xfer. */
|
|
#define RX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
|
|
#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
|
|
#define EarlyTxThld 0x3F /* 0x3F means NO early transmit */
|
|
#define RxPacketMaxSize 0x0800 /* Maximum size supported is 16K-1 */
|
|
#define InterFrameGap 0x03 /* 3 means InterFrameGap = the shortest one */
|
|
|
|
#define NUM_TX_DESC 1 /* Number of Tx descriptor registers */
|
|
#ifdef CONFIG_SYS_RX_ETH_BUFFER
|
|
#define NUM_RX_DESC CONFIG_SYS_RX_ETH_BUFFER
|
|
#else
|
|
#define NUM_RX_DESC 4 /* Number of Rx descriptor registers */
|
|
#endif
|
|
#define RX_BUF_SIZE 1536 /* Rx Buffer size */
|
|
#define RX_BUF_LEN 8192
|
|
|
|
#define RTL_MIN_IO_SIZE 0x80
|
|
#define TX_TIMEOUT (6*HZ)
|
|
|
|
/* write/read MMIO register. Notice: {read,write}[wl] do the necessary swapping */
|
|
#define RTL_W8(reg, val8) writeb((val8), ioaddr + (reg))
|
|
#define RTL_W16(reg, val16) writew((val16), ioaddr + (reg))
|
|
#define RTL_W32(reg, val32) writel((val32), ioaddr + (reg))
|
|
#define RTL_R8(reg) readb(ioaddr + (reg))
|
|
#define RTL_R16(reg) readw(ioaddr + (reg))
|
|
#define RTL_R32(reg) readl(ioaddr + (reg))
|
|
|
|
#define ETH_FRAME_LEN MAX_ETH_FRAME_SIZE
|
|
#define ETH_ALEN MAC_ADDR_LEN
|
|
#define ETH_ZLEN 60
|
|
|
|
#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)(unsigned long)dev->priv, \
|
|
(pci_addr_t)(unsigned long)a)
|
|
#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)(unsigned long)dev->priv, \
|
|
(phys_addr_t)a)
|
|
|
|
enum RTL8169_registers {
|
|
MAC0 = 0, /* Ethernet hardware address. */
|
|
MAR0 = 8, /* Multicast filter. */
|
|
TxDescStartAddrLow = 0x20,
|
|
TxDescStartAddrHigh = 0x24,
|
|
TxHDescStartAddrLow = 0x28,
|
|
TxHDescStartAddrHigh = 0x2c,
|
|
FLASH = 0x30,
|
|
ERSR = 0x36,
|
|
ChipCmd = 0x37,
|
|
TxPoll = 0x38,
|
|
IntrMask = 0x3C,
|
|
IntrStatus = 0x3E,
|
|
TxConfig = 0x40,
|
|
RxConfig = 0x44,
|
|
RxMissed = 0x4C,
|
|
Cfg9346 = 0x50,
|
|
Config0 = 0x51,
|
|
Config1 = 0x52,
|
|
Config2 = 0x53,
|
|
Config3 = 0x54,
|
|
Config4 = 0x55,
|
|
Config5 = 0x56,
|
|
MultiIntr = 0x5C,
|
|
PHYAR = 0x60,
|
|
TBICSR = 0x64,
|
|
TBI_ANAR = 0x68,
|
|
TBI_LPAR = 0x6A,
|
|
PHYstatus = 0x6C,
|
|
RxMaxSize = 0xDA,
|
|
CPlusCmd = 0xE0,
|
|
RxDescStartAddrLow = 0xE4,
|
|
RxDescStartAddrHigh = 0xE8,
|
|
EarlyTxThres = 0xEC,
|
|
FuncEvent = 0xF0,
|
|
FuncEventMask = 0xF4,
|
|
FuncPresetState = 0xF8,
|
|
FuncForceEvent = 0xFC,
|
|
};
|
|
|
|
enum RTL8169_register_content {
|
|
/*InterruptStatusBits */
|
|
SYSErr = 0x8000,
|
|
PCSTimeout = 0x4000,
|
|
SWInt = 0x0100,
|
|
TxDescUnavail = 0x80,
|
|
RxFIFOOver = 0x40,
|
|
RxUnderrun = 0x20,
|
|
RxOverflow = 0x10,
|
|
TxErr = 0x08,
|
|
TxOK = 0x04,
|
|
RxErr = 0x02,
|
|
RxOK = 0x01,
|
|
|
|
/*RxStatusDesc */
|
|
RxRES = 0x00200000,
|
|
RxCRC = 0x00080000,
|
|
RxRUNT = 0x00100000,
|
|
RxRWT = 0x00400000,
|
|
|
|
/*ChipCmdBits */
|
|
CmdReset = 0x10,
|
|
CmdRxEnb = 0x08,
|
|
CmdTxEnb = 0x04,
|
|
RxBufEmpty = 0x01,
|
|
|
|
/*Cfg9346Bits */
|
|
Cfg9346_Lock = 0x00,
|
|
Cfg9346_Unlock = 0xC0,
|
|
|
|
/*rx_mode_bits */
|
|
AcceptErr = 0x20,
|
|
AcceptRunt = 0x10,
|
|
AcceptBroadcast = 0x08,
|
|
AcceptMulticast = 0x04,
|
|
AcceptMyPhys = 0x02,
|
|
AcceptAllPhys = 0x01,
|
|
|
|
/*RxConfigBits */
|
|
RxCfgFIFOShift = 13,
|
|
RxCfgDMAShift = 8,
|
|
|
|
/*TxConfigBits */
|
|
TxInterFrameGapShift = 24,
|
|
TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */
|
|
|
|
/*rtl8169_PHYstatus */
|
|
TBI_Enable = 0x80,
|
|
TxFlowCtrl = 0x40,
|
|
RxFlowCtrl = 0x20,
|
|
_1000bpsF = 0x10,
|
|
_100bps = 0x08,
|
|
_10bps = 0x04,
|
|
LinkStatus = 0x02,
|
|
FullDup = 0x01,
|
|
|
|
/*GIGABIT_PHY_registers */
|
|
PHY_CTRL_REG = 0,
|
|
PHY_STAT_REG = 1,
|
|
PHY_AUTO_NEGO_REG = 4,
|
|
PHY_1000_CTRL_REG = 9,
|
|
|
|
/*GIGABIT_PHY_REG_BIT */
|
|
PHY_Restart_Auto_Nego = 0x0200,
|
|
PHY_Enable_Auto_Nego = 0x1000,
|
|
|
|
/* PHY_STAT_REG = 1; */
|
|
PHY_Auto_Nego_Comp = 0x0020,
|
|
|
|
/* PHY_AUTO_NEGO_REG = 4; */
|
|
PHY_Cap_10_Half = 0x0020,
|
|
PHY_Cap_10_Full = 0x0040,
|
|
PHY_Cap_100_Half = 0x0080,
|
|
PHY_Cap_100_Full = 0x0100,
|
|
|
|
/* PHY_1000_CTRL_REG = 9; */
|
|
PHY_Cap_1000_Full = 0x0200,
|
|
|
|
PHY_Cap_Null = 0x0,
|
|
|
|
/*_MediaType*/
|
|
_10_Half = 0x01,
|
|
_10_Full = 0x02,
|
|
_100_Half = 0x04,
|
|
_100_Full = 0x08,
|
|
_1000_Full = 0x10,
|
|
|
|
/*_TBICSRBit*/
|
|
TBILinkOK = 0x02000000,
|
|
};
|
|
|
|
static struct {
|
|
const char *name;
|
|
u8 version; /* depend on RTL8169 docs */
|
|
u32 RxConfigMask; /* should clear the bits supported by this chip */
|
|
} rtl_chip_info[] = {
|
|
{"RTL-8169", 0x00, 0xff7e1880,},
|
|
{"RTL-8169", 0x04, 0xff7e1880,},
|
|
{"RTL-8169", 0x00, 0xff7e1880,},
|
|
{"RTL-8169s/8110s", 0x02, 0xff7e1880,},
|
|
{"RTL-8169s/8110s", 0x04, 0xff7e1880,},
|
|
{"RTL-8169sb/8110sb", 0x10, 0xff7e1880,},
|
|
{"RTL-8169sc/8110sc", 0x18, 0xff7e1880,},
|
|
{"RTL-8168b/8111sb", 0x30, 0xff7e1880,},
|
|
{"RTL-8168b/8111sb", 0x38, 0xff7e1880,},
|
|
{"RTL-8168d/8111d", 0x28, 0xff7e1880,},
|
|
{"RTL-8168evl/8111evl", 0x2e, 0xff7e1880,},
|
|
{"RTL-8168/8111g", 0x4c, 0xff7e1880,},
|
|
{"RTL-8101e", 0x34, 0xff7e1880,},
|
|
{"RTL-8100e", 0x32, 0xff7e1880,},
|
|
};
|
|
|
|
enum _DescStatusBit {
|
|
OWNbit = 0x80000000,
|
|
EORbit = 0x40000000,
|
|
FSbit = 0x20000000,
|
|
LSbit = 0x10000000,
|
|
};
|
|
|
|
struct TxDesc {
|
|
u32 status;
|
|
u32 vlan_tag;
|
|
u32 buf_addr;
|
|
u32 buf_Haddr;
|
|
};
|
|
|
|
struct RxDesc {
|
|
u32 status;
|
|
u32 vlan_tag;
|
|
u32 buf_addr;
|
|
u32 buf_Haddr;
|
|
};
|
|
|
|
static unsigned char rxdata[RX_BUF_LEN];
|
|
|
|
#define RTL8169_DESC_SIZE 16
|
|
|
|
#if ARCH_DMA_MINALIGN > 256
|
|
# define RTL8169_ALIGN ARCH_DMA_MINALIGN
|
|
#else
|
|
# define RTL8169_ALIGN 256
|
|
#endif
|
|
|
|
/*
|
|
* Warn if the cache-line size is larger than the descriptor size. In such
|
|
* cases the driver will likely fail because the CPU needs to flush the cache
|
|
* when requeuing RX buffers, therefore descriptors written by the hardware
|
|
* may be discarded.
|
|
*
|
|
* This can be fixed by defining CONFIG_SYS_NONCACHED_MEMORY which will cause
|
|
* the driver to allocate descriptors from a pool of non-cached memory.
|
|
*/
|
|
#if RTL8169_DESC_SIZE < ARCH_DMA_MINALIGN
|
|
#if !defined(CONFIG_SYS_NONCACHED_MEMORY) && \
|
|
!defined(CONFIG_SYS_DCACHE_OFF) && !defined(CONFIG_X86)
|
|
#warning cache-line size is larger than descriptor size
|
|
#endif
|
|
#endif
|
|
|
|
/*
|
|
* Create a static buffer of size RX_BUF_SZ for each TX Descriptor. All
|
|
* descriptors point to a part of this buffer.
|
|
*/
|
|
DEFINE_ALIGN_BUFFER(u8, txb, NUM_TX_DESC * RX_BUF_SIZE, RTL8169_ALIGN);
|
|
|
|
/*
|
|
* Create a static buffer of size RX_BUF_SZ for each RX Descriptor. All
|
|
* descriptors point to a part of this buffer.
|
|
*/
|
|
DEFINE_ALIGN_BUFFER(u8, rxb, NUM_RX_DESC * RX_BUF_SIZE, RTL8169_ALIGN);
|
|
|
|
struct rtl8169_private {
|
|
ulong iobase;
|
|
void *mmio_addr; /* memory map physical address */
|
|
int chipset;
|
|
unsigned long cur_rx; /* Index into the Rx descriptor buffer of next Rx pkt. */
|
|
unsigned long cur_tx; /* Index into the Tx descriptor buffer of next Rx pkt. */
|
|
unsigned long dirty_tx;
|
|
struct TxDesc *TxDescArray; /* Index of 256-alignment Tx Descriptor buffer */
|
|
struct RxDesc *RxDescArray; /* Index of 256-alignment Rx Descriptor buffer */
|
|
unsigned char *RxBufferRings; /* Index of Rx Buffer */
|
|
unsigned char *RxBufferRing[NUM_RX_DESC]; /* Index of Rx Buffer array */
|
|
unsigned char *Tx_skbuff[NUM_TX_DESC];
|
|
} tpx;
|
|
|
|
static struct rtl8169_private *tpc;
|
|
|
|
static const u16 rtl8169_intr_mask =
|
|
SYSErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver | TxErr |
|
|
TxOK | RxErr | RxOK;
|
|
static const unsigned int rtl8169_rx_config =
|
|
(RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift);
|
|
|
|
static struct pci_device_id supported[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8167) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8168) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169) },
|
|
{}
|
|
};
|
|
|
|
void mdio_write(int RegAddr, int value)
|
|
{
|
|
int i;
|
|
|
|
RTL_W32(PHYAR, 0x80000000 | (RegAddr & 0xFF) << 16 | value);
|
|
udelay(1000);
|
|
|
|
for (i = 2000; i > 0; i--) {
|
|
/* Check if the RTL8169 has completed writing to the specified MII register */
|
|
if (!(RTL_R32(PHYAR) & 0x80000000)) {
|
|
break;
|
|
} else {
|
|
udelay(100);
|
|
}
|
|
}
|
|
}
|
|
|
|
int mdio_read(int RegAddr)
|
|
{
|
|
int i, value = -1;
|
|
|
|
RTL_W32(PHYAR, 0x0 | (RegAddr & 0xFF) << 16);
|
|
udelay(1000);
|
|
|
|
for (i = 2000; i > 0; i--) {
|
|
/* Check if the RTL8169 has completed retrieving data from the specified MII register */
|
|
if (RTL_R32(PHYAR) & 0x80000000) {
|
|
value = (int) (RTL_R32(PHYAR) & 0xFFFF);
|
|
break;
|
|
} else {
|
|
udelay(100);
|
|
}
|
|
}
|
|
return value;
|
|
}
|
|
|
|
static int rtl8169_init_board(unsigned long dev_iobase, const char *name)
|
|
{
|
|
int i;
|
|
u32 tmp;
|
|
|
|
#ifdef DEBUG_RTL8169
|
|
printf ("%s\n", __FUNCTION__);
|
|
#endif
|
|
ioaddr = dev_iobase;
|
|
|
|
/* Soft reset the chip. */
|
|
RTL_W8(ChipCmd, CmdReset);
|
|
|
|
/* Check that the chip has finished the reset. */
|
|
for (i = 1000; i > 0; i--)
|
|
if ((RTL_R8(ChipCmd) & CmdReset) == 0)
|
|
break;
|
|
else
|
|
udelay(10);
|
|
|
|
/* identify chip attached to board */
|
|
tmp = RTL_R32(TxConfig);
|
|
tmp = ((tmp & 0x7c000000) + ((tmp & 0x00800000) << 2)) >> 24;
|
|
|
|
for (i = ARRAY_SIZE(rtl_chip_info) - 1; i >= 0; i--){
|
|
if (tmp == rtl_chip_info[i].version) {
|
|
tpc->chipset = i;
|
|
goto match;
|
|
}
|
|
}
|
|
|
|
/* if unknown chip, assume array element #0, original RTL-8169 in this case */
|
|
printf("PCI device %s: unknown chip version, assuming RTL-8169\n",
|
|
name);
|
|
printf("PCI device: TxConfig = 0x%lX\n", (unsigned long) RTL_R32(TxConfig));
|
|
tpc->chipset = 0;
|
|
|
|
match:
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* TX and RX descriptors are 16 bytes. This causes problems with the cache
|
|
* maintenance on CPUs where the cache-line size exceeds the size of these
|
|
* descriptors. What will happen is that when the driver receives a packet
|
|
* it will be immediately requeued for the hardware to reuse. The CPU will
|
|
* therefore need to flush the cache-line containing the descriptor, which
|
|
* will cause all other descriptors in the same cache-line to be flushed
|
|
* along with it. If one of those descriptors had been written to by the
|
|
* device those changes (and the associated packet) will be lost.
|
|
*
|
|
* To work around this, we make use of non-cached memory if available. If
|
|
* descriptors are mapped uncached there's no need to manually flush them
|
|
* or invalidate them.
|
|
*
|
|
* Note that this only applies to descriptors. The packet data buffers do
|
|
* not have the same constraints since they are 1536 bytes large, so they
|
|
* are unlikely to share cache-lines.
|
|
*/
|
|
static void *rtl_alloc_descs(unsigned int num)
|
|
{
|
|
size_t size = num * RTL8169_DESC_SIZE;
|
|
|
|
#ifdef CONFIG_SYS_NONCACHED_MEMORY
|
|
return (void *)noncached_alloc(size, RTL8169_ALIGN);
|
|
#else
|
|
return memalign(RTL8169_ALIGN, size);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Cache maintenance functions. These are simple wrappers around the more
|
|
* general purpose flush_cache() and invalidate_dcache_range() functions.
|
|
*/
|
|
|
|
static void rtl_inval_rx_desc(struct RxDesc *desc)
|
|
{
|
|
#ifndef CONFIG_SYS_NONCACHED_MEMORY
|
|
unsigned long start = (unsigned long)desc & ~(ARCH_DMA_MINALIGN - 1);
|
|
unsigned long end = ALIGN(start + sizeof(*desc), ARCH_DMA_MINALIGN);
|
|
|
|
invalidate_dcache_range(start, end);
|
|
#endif
|
|
}
|
|
|
|
static void rtl_flush_rx_desc(struct RxDesc *desc)
|
|
{
|
|
#ifndef CONFIG_SYS_NONCACHED_MEMORY
|
|
flush_cache((unsigned long)desc, sizeof(*desc));
|
|
#endif
|
|
}
|
|
|
|
static void rtl_inval_tx_desc(struct TxDesc *desc)
|
|
{
|
|
#ifndef CONFIG_SYS_NONCACHED_MEMORY
|
|
unsigned long start = (unsigned long)desc & ~(ARCH_DMA_MINALIGN - 1);
|
|
unsigned long end = ALIGN(start + sizeof(*desc), ARCH_DMA_MINALIGN);
|
|
|
|
invalidate_dcache_range(start, end);
|
|
#endif
|
|
}
|
|
|
|
static void rtl_flush_tx_desc(struct TxDesc *desc)
|
|
{
|
|
#ifndef CONFIG_SYS_NONCACHED_MEMORY
|
|
flush_cache((unsigned long)desc, sizeof(*desc));
|
|
#endif
|
|
}
|
|
|
|
static void rtl_inval_buffer(void *buf, size_t size)
|
|
{
|
|
unsigned long start = (unsigned long)buf & ~(ARCH_DMA_MINALIGN - 1);
|
|
unsigned long end = ALIGN(start + size, ARCH_DMA_MINALIGN);
|
|
|
|
invalidate_dcache_range(start, end);
|
|
}
|
|
|
|
static void rtl_flush_buffer(void *buf, size_t size)
|
|
{
|
|
flush_cache((unsigned long)buf, size);
|
|
}
|
|
|
|
/**************************************************************************
|
|
RECV - Receive a frame
|
|
***************************************************************************/
|
|
#ifdef CONFIG_DM_ETH
|
|
static int rtl_recv_common(struct udevice *dev, unsigned long dev_iobase,
|
|
uchar **packetp)
|
|
#else
|
|
static int rtl_recv_common(pci_dev_t dev, unsigned long dev_iobase,
|
|
uchar **packetp)
|
|
#endif
|
|
{
|
|
/* return true if there's an ethernet packet ready to read */
|
|
/* nic->packet should contain data on return */
|
|
/* nic->packetlen should contain length of data */
|
|
int cur_rx;
|
|
int length = 0;
|
|
|
|
#ifdef DEBUG_RTL8169_RX
|
|
printf ("%s\n", __FUNCTION__);
|
|
#endif
|
|
ioaddr = dev_iobase;
|
|
|
|
cur_rx = tpc->cur_rx;
|
|
|
|
rtl_inval_rx_desc(&tpc->RxDescArray[cur_rx]);
|
|
|
|
if ((le32_to_cpu(tpc->RxDescArray[cur_rx].status) & OWNbit) == 0) {
|
|
if (!(le32_to_cpu(tpc->RxDescArray[cur_rx].status) & RxRES)) {
|
|
length = (int) (le32_to_cpu(tpc->RxDescArray[cur_rx].
|
|
status) & 0x00001FFF) - 4;
|
|
|
|
rtl_inval_buffer(tpc->RxBufferRing[cur_rx], length);
|
|
memcpy(rxdata, tpc->RxBufferRing[cur_rx], length);
|
|
|
|
if (cur_rx == NUM_RX_DESC - 1)
|
|
tpc->RxDescArray[cur_rx].status =
|
|
cpu_to_le32((OWNbit | EORbit) + RX_BUF_SIZE);
|
|
else
|
|
tpc->RxDescArray[cur_rx].status =
|
|
cpu_to_le32(OWNbit + RX_BUF_SIZE);
|
|
#ifdef CONFIG_DM_ETH
|
|
tpc->RxDescArray[cur_rx].buf_addr = cpu_to_le32(
|
|
dm_pci_mem_to_phys(dev,
|
|
(pci_addr_t)(unsigned long)
|
|
tpc->RxBufferRing[cur_rx]));
|
|
#else
|
|
tpc->RxDescArray[cur_rx].buf_addr = cpu_to_le32(
|
|
pci_mem_to_phys(dev, (pci_addr_t)(unsigned long)
|
|
tpc->RxBufferRing[cur_rx]));
|
|
#endif
|
|
rtl_flush_rx_desc(&tpc->RxDescArray[cur_rx]);
|
|
#ifdef CONFIG_DM_ETH
|
|
*packetp = rxdata;
|
|
#else
|
|
net_process_received_packet(rxdata, length);
|
|
#endif
|
|
} else {
|
|
puts("Error Rx");
|
|
length = -EIO;
|
|
}
|
|
cur_rx = (cur_rx + 1) % NUM_RX_DESC;
|
|
tpc->cur_rx = cur_rx;
|
|
return length;
|
|
|
|
} else {
|
|
ushort sts = RTL_R8(IntrStatus);
|
|
RTL_W8(IntrStatus, sts & ~(TxErr | RxErr | SYSErr));
|
|
udelay(100); /* wait */
|
|
}
|
|
tpc->cur_rx = cur_rx;
|
|
return (0); /* initially as this is called to flush the input */
|
|
}
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
int rtl8169_eth_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
struct rtl8169_private *priv = dev_get_priv(dev);
|
|
|
|
return rtl_recv_common(dev, priv->iobase, packetp);
|
|
}
|
|
#else
|
|
static int rtl_recv(struct eth_device *dev)
|
|
{
|
|
return rtl_recv_common((pci_dev_t)(unsigned long)dev->priv,
|
|
dev->iobase, NULL);
|
|
}
|
|
#endif /* nCONFIG_DM_ETH */
|
|
|
|
#define HZ 1000
|
|
/**************************************************************************
|
|
SEND - Transmit a frame
|
|
***************************************************************************/
|
|
#ifdef CONFIG_DM_ETH
|
|
static int rtl_send_common(struct udevice *dev, unsigned long dev_iobase,
|
|
void *packet, int length)
|
|
#else
|
|
static int rtl_send_common(pci_dev_t dev, unsigned long dev_iobase,
|
|
void *packet, int length)
|
|
#endif
|
|
{
|
|
/* send the packet to destination */
|
|
|
|
u32 to;
|
|
u8 *ptxb;
|
|
int entry = tpc->cur_tx % NUM_TX_DESC;
|
|
u32 len = length;
|
|
int ret;
|
|
|
|
#ifdef DEBUG_RTL8169_TX
|
|
int stime = currticks();
|
|
printf ("%s\n", __FUNCTION__);
|
|
printf("sending %d bytes\n", len);
|
|
#endif
|
|
|
|
ioaddr = dev_iobase;
|
|
|
|
/* point to the current txb incase multiple tx_rings are used */
|
|
ptxb = tpc->Tx_skbuff[entry * MAX_ETH_FRAME_SIZE];
|
|
memcpy(ptxb, (char *)packet, (int)length);
|
|
rtl_flush_buffer(ptxb, length);
|
|
|
|
while (len < ETH_ZLEN)
|
|
ptxb[len++] = '\0';
|
|
|
|
tpc->TxDescArray[entry].buf_Haddr = 0;
|
|
#ifdef CONFIG_DM_ETH
|
|
tpc->TxDescArray[entry].buf_addr = cpu_to_le32(
|
|
dm_pci_mem_to_phys(dev, (pci_addr_t)(unsigned long)ptxb));
|
|
#else
|
|
tpc->TxDescArray[entry].buf_addr = cpu_to_le32(
|
|
pci_mem_to_phys(dev, (pci_addr_t)(unsigned long)ptxb));
|
|
#endif
|
|
if (entry != (NUM_TX_DESC - 1)) {
|
|
tpc->TxDescArray[entry].status =
|
|
cpu_to_le32((OWNbit | FSbit | LSbit) |
|
|
((len > ETH_ZLEN) ? len : ETH_ZLEN));
|
|
} else {
|
|
tpc->TxDescArray[entry].status =
|
|
cpu_to_le32((OWNbit | EORbit | FSbit | LSbit) |
|
|
((len > ETH_ZLEN) ? len : ETH_ZLEN));
|
|
}
|
|
rtl_flush_tx_desc(&tpc->TxDescArray[entry]);
|
|
RTL_W8(TxPoll, 0x40); /* set polling bit */
|
|
|
|
tpc->cur_tx++;
|
|
to = currticks() + TX_TIMEOUT;
|
|
do {
|
|
rtl_inval_tx_desc(&tpc->TxDescArray[entry]);
|
|
} while ((le32_to_cpu(tpc->TxDescArray[entry].status) & OWNbit)
|
|
&& (currticks() < to)); /* wait */
|
|
|
|
if (currticks() >= to) {
|
|
#ifdef DEBUG_RTL8169_TX
|
|
puts("tx timeout/error\n");
|
|
printf("%s elapsed time : %lu\n", __func__, currticks()-stime);
|
|
#endif
|
|
ret = -ETIMEDOUT;
|
|
} else {
|
|
#ifdef DEBUG_RTL8169_TX
|
|
puts("tx done\n");
|
|
#endif
|
|
ret = 0;
|
|
}
|
|
/* Delay to make net console (nc) work properly */
|
|
udelay(20);
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
int rtl8169_eth_send(struct udevice *dev, void *packet, int length)
|
|
{
|
|
struct rtl8169_private *priv = dev_get_priv(dev);
|
|
|
|
return rtl_send_common(dev, priv->iobase, packet, length);
|
|
}
|
|
|
|
#else
|
|
static int rtl_send(struct eth_device *dev, void *packet, int length)
|
|
{
|
|
return rtl_send_common((pci_dev_t)(unsigned long)dev->priv,
|
|
dev->iobase, packet, length);
|
|
}
|
|
#endif
|
|
|
|
static void rtl8169_set_rx_mode(void)
|
|
{
|
|
u32 mc_filter[2]; /* Multicast hash filter */
|
|
int rx_mode;
|
|
u32 tmp = 0;
|
|
|
|
#ifdef DEBUG_RTL8169
|
|
printf ("%s\n", __FUNCTION__);
|
|
#endif
|
|
|
|
/* IFF_ALLMULTI */
|
|
/* Too many to filter perfectly -- accept all multicasts. */
|
|
rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
|
|
mc_filter[1] = mc_filter[0] = 0xffffffff;
|
|
|
|
tmp = rtl8169_rx_config | rx_mode | (RTL_R32(RxConfig) &
|
|
rtl_chip_info[tpc->chipset].RxConfigMask);
|
|
|
|
RTL_W32(RxConfig, tmp);
|
|
RTL_W32(MAR0 + 0, mc_filter[0]);
|
|
RTL_W32(MAR0 + 4, mc_filter[1]);
|
|
}
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
static void rtl8169_hw_start(struct udevice *dev)
|
|
#else
|
|
static void rtl8169_hw_start(pci_dev_t dev)
|
|
#endif
|
|
{
|
|
u32 i;
|
|
|
|
#ifdef DEBUG_RTL8169
|
|
int stime = currticks();
|
|
printf ("%s\n", __FUNCTION__);
|
|
#endif
|
|
|
|
#if 0
|
|
/* Soft reset the chip. */
|
|
RTL_W8(ChipCmd, CmdReset);
|
|
|
|
/* Check that the chip has finished the reset. */
|
|
for (i = 1000; i > 0; i--) {
|
|
if ((RTL_R8(ChipCmd) & CmdReset) == 0)
|
|
break;
|
|
else
|
|
udelay(10);
|
|
}
|
|
#endif
|
|
|
|
RTL_W8(Cfg9346, Cfg9346_Unlock);
|
|
|
|
/* RTL-8169sb/8110sb or previous version */
|
|
if (tpc->chipset <= 5)
|
|
RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
|
|
|
|
RTL_W8(EarlyTxThres, EarlyTxThld);
|
|
|
|
/* For gigabit rtl8169 */
|
|
RTL_W16(RxMaxSize, RxPacketMaxSize);
|
|
|
|
/* Set Rx Config register */
|
|
i = rtl8169_rx_config | (RTL_R32(RxConfig) &
|
|
rtl_chip_info[tpc->chipset].RxConfigMask);
|
|
RTL_W32(RxConfig, i);
|
|
|
|
/* Set DMA burst size and Interframe Gap Time */
|
|
RTL_W32(TxConfig, (TX_DMA_BURST << TxDMAShift) |
|
|
(InterFrameGap << TxInterFrameGapShift));
|
|
|
|
|
|
tpc->cur_rx = 0;
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
RTL_W32(TxDescStartAddrLow, dm_pci_mem_to_phys(dev,
|
|
(pci_addr_t)(unsigned long)tpc->TxDescArray));
|
|
#else
|
|
RTL_W32(TxDescStartAddrLow, pci_mem_to_phys(dev,
|
|
(pci_addr_t)(unsigned long)tpc->TxDescArray));
|
|
#endif
|
|
RTL_W32(TxDescStartAddrHigh, (unsigned long)0);
|
|
#ifdef CONFIG_DM_ETH
|
|
RTL_W32(RxDescStartAddrLow, dm_pci_mem_to_phys(
|
|
dev, (pci_addr_t)(unsigned long)tpc->RxDescArray));
|
|
#else
|
|
RTL_W32(RxDescStartAddrLow, pci_mem_to_phys(
|
|
dev, (pci_addr_t)(unsigned long)tpc->RxDescArray));
|
|
#endif
|
|
RTL_W32(RxDescStartAddrHigh, (unsigned long)0);
|
|
|
|
/* RTL-8169sc/8110sc or later version */
|
|
if (tpc->chipset > 5)
|
|
RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
|
|
|
|
RTL_W8(Cfg9346, Cfg9346_Lock);
|
|
udelay(10);
|
|
|
|
RTL_W32(RxMissed, 0);
|
|
|
|
rtl8169_set_rx_mode();
|
|
|
|
/* no early-rx interrupts */
|
|
RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000);
|
|
|
|
#ifdef DEBUG_RTL8169
|
|
printf("%s elapsed time : %lu\n", __func__, currticks()-stime);
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
static void rtl8169_init_ring(struct udevice *dev)
|
|
#else
|
|
static void rtl8169_init_ring(pci_dev_t dev)
|
|
#endif
|
|
{
|
|
int i;
|
|
|
|
#ifdef DEBUG_RTL8169
|
|
int stime = currticks();
|
|
printf ("%s\n", __FUNCTION__);
|
|
#endif
|
|
|
|
tpc->cur_rx = 0;
|
|
tpc->cur_tx = 0;
|
|
tpc->dirty_tx = 0;
|
|
memset(tpc->TxDescArray, 0x0, NUM_TX_DESC * sizeof(struct TxDesc));
|
|
memset(tpc->RxDescArray, 0x0, NUM_RX_DESC * sizeof(struct RxDesc));
|
|
|
|
for (i = 0; i < NUM_TX_DESC; i++) {
|
|
tpc->Tx_skbuff[i] = &txb[i];
|
|
}
|
|
|
|
for (i = 0; i < NUM_RX_DESC; i++) {
|
|
if (i == (NUM_RX_DESC - 1))
|
|
tpc->RxDescArray[i].status =
|
|
cpu_to_le32((OWNbit | EORbit) + RX_BUF_SIZE);
|
|
else
|
|
tpc->RxDescArray[i].status =
|
|
cpu_to_le32(OWNbit + RX_BUF_SIZE);
|
|
|
|
tpc->RxBufferRing[i] = &rxb[i * RX_BUF_SIZE];
|
|
#ifdef CONFIG_DM_ETH
|
|
tpc->RxDescArray[i].buf_addr = cpu_to_le32(dm_pci_mem_to_phys(
|
|
dev, (pci_addr_t)(unsigned long)tpc->RxBufferRing[i]));
|
|
#else
|
|
tpc->RxDescArray[i].buf_addr = cpu_to_le32(pci_mem_to_phys(
|
|
dev, (pci_addr_t)(unsigned long)tpc->RxBufferRing[i]));
|
|
#endif
|
|
rtl_flush_rx_desc(&tpc->RxDescArray[i]);
|
|
}
|
|
|
|
#ifdef DEBUG_RTL8169
|
|
printf("%s elapsed time : %lu\n", __func__, currticks()-stime);
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
static void rtl8169_common_start(struct udevice *dev, unsigned char *enetaddr,
|
|
unsigned long dev_iobase)
|
|
#else
|
|
static void rtl8169_common_start(pci_dev_t dev, unsigned char *enetaddr,
|
|
unsigned long dev_iobase)
|
|
#endif
|
|
{
|
|
int i;
|
|
|
|
#ifdef DEBUG_RTL8169
|
|
int stime = currticks();
|
|
printf ("%s\n", __FUNCTION__);
|
|
#endif
|
|
|
|
ioaddr = dev_iobase;
|
|
|
|
rtl8169_init_ring(dev);
|
|
rtl8169_hw_start(dev);
|
|
/* Construct a perfect filter frame with the mac address as first match
|
|
* and broadcast for all others */
|
|
for (i = 0; i < 192; i++)
|
|
txb[i] = 0xFF;
|
|
|
|
txb[0] = enetaddr[0];
|
|
txb[1] = enetaddr[1];
|
|
txb[2] = enetaddr[2];
|
|
txb[3] = enetaddr[3];
|
|
txb[4] = enetaddr[4];
|
|
txb[5] = enetaddr[5];
|
|
|
|
#ifdef DEBUG_RTL8169
|
|
printf("%s elapsed time : %lu\n", __func__, currticks()-stime);
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
static int rtl8169_eth_start(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *plat = dev_get_platdata(dev);
|
|
struct rtl8169_private *priv = dev_get_priv(dev);
|
|
|
|
rtl8169_common_start(dev, plat->enetaddr, priv->iobase);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
/**************************************************************************
|
|
RESET - Finish setting up the ethernet interface
|
|
***************************************************************************/
|
|
static int rtl_reset(struct eth_device *dev, bd_t *bis)
|
|
{
|
|
rtl8169_common_start((pci_dev_t)(unsigned long)dev->priv,
|
|
dev->enetaddr, dev->iobase);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* nCONFIG_DM_ETH */
|
|
|
|
static void rtl_halt_common(unsigned long dev_iobase)
|
|
{
|
|
int i;
|
|
|
|
#ifdef DEBUG_RTL8169
|
|
printf ("%s\n", __FUNCTION__);
|
|
#endif
|
|
|
|
ioaddr = dev_iobase;
|
|
|
|
/* Stop the chip's Tx and Rx DMA processes. */
|
|
RTL_W8(ChipCmd, 0x00);
|
|
|
|
/* Disable interrupts by clearing the interrupt mask. */
|
|
RTL_W16(IntrMask, 0x0000);
|
|
|
|
RTL_W32(RxMissed, 0);
|
|
|
|
for (i = 0; i < NUM_RX_DESC; i++) {
|
|
tpc->RxBufferRing[i] = NULL;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
void rtl8169_eth_stop(struct udevice *dev)
|
|
{
|
|
struct rtl8169_private *priv = dev_get_priv(dev);
|
|
|
|
rtl_halt_common(priv->iobase);
|
|
}
|
|
#else
|
|
/**************************************************************************
|
|
HALT - Turn off ethernet interface
|
|
***************************************************************************/
|
|
static void rtl_halt(struct eth_device *dev)
|
|
{
|
|
rtl_halt_common(dev->iobase);
|
|
}
|
|
#endif
|
|
|
|
/**************************************************************************
|
|
INIT - Look for an adapter, this routine's visible to the outside
|
|
***************************************************************************/
|
|
|
|
#define board_found 1
|
|
#define valid_link 0
|
|
static int rtl_init(unsigned long dev_ioaddr, const char *name,
|
|
unsigned char *enetaddr)
|
|
{
|
|
static int board_idx = -1;
|
|
int i, rc;
|
|
int option = -1, Cap10_100 = 0, Cap1000 = 0;
|
|
|
|
#ifdef DEBUG_RTL8169
|
|
printf ("%s\n", __FUNCTION__);
|
|
#endif
|
|
ioaddr = dev_ioaddr;
|
|
|
|
board_idx++;
|
|
|
|
/* point to private storage */
|
|
tpc = &tpx;
|
|
|
|
rc = rtl8169_init_board(ioaddr, name);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Get MAC address. FIXME: read EEPROM */
|
|
for (i = 0; i < MAC_ADDR_LEN; i++)
|
|
enetaddr[i] = RTL_R8(MAC0 + i);
|
|
|
|
#ifdef DEBUG_RTL8169
|
|
printf("chipset = %d\n", tpc->chipset);
|
|
printf("MAC Address");
|
|
for (i = 0; i < MAC_ADDR_LEN; i++)
|
|
printf(":%02x", enetaddr[i]);
|
|
putc('\n');
|
|
#endif
|
|
|
|
#ifdef DEBUG_RTL8169
|
|
/* Print out some hardware info */
|
|
printf("%s: at ioaddr 0x%lx\n", name, ioaddr);
|
|
#endif
|
|
|
|
/* if TBI is not endbled */
|
|
if (!(RTL_R8(PHYstatus) & TBI_Enable)) {
|
|
int val = mdio_read(PHY_AUTO_NEGO_REG);
|
|
|
|
option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx];
|
|
/* Force RTL8169 in 10/100/1000 Full/Half mode. */
|
|
if (option > 0) {
|
|
#ifdef DEBUG_RTL8169
|
|
printf("%s: Force-mode Enabled.\n", name);
|
|
#endif
|
|
Cap10_100 = 0, Cap1000 = 0;
|
|
switch (option) {
|
|
case _10_Half:
|
|
Cap10_100 = PHY_Cap_10_Half;
|
|
Cap1000 = PHY_Cap_Null;
|
|
break;
|
|
case _10_Full:
|
|
Cap10_100 = PHY_Cap_10_Full;
|
|
Cap1000 = PHY_Cap_Null;
|
|
break;
|
|
case _100_Half:
|
|
Cap10_100 = PHY_Cap_100_Half;
|
|
Cap1000 = PHY_Cap_Null;
|
|
break;
|
|
case _100_Full:
|
|
Cap10_100 = PHY_Cap_100_Full;
|
|
Cap1000 = PHY_Cap_Null;
|
|
break;
|
|
case _1000_Full:
|
|
Cap10_100 = PHY_Cap_Null;
|
|
Cap1000 = PHY_Cap_1000_Full;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
mdio_write(PHY_AUTO_NEGO_REG, Cap10_100 | (val & 0x1F)); /* leave PHY_AUTO_NEGO_REG bit4:0 unchanged */
|
|
mdio_write(PHY_1000_CTRL_REG, Cap1000);
|
|
} else {
|
|
#ifdef DEBUG_RTL8169
|
|
printf("%s: Auto-negotiation Enabled.\n",
|
|
name);
|
|
#endif
|
|
/* enable 10/100 Full/Half Mode, leave PHY_AUTO_NEGO_REG bit4:0 unchanged */
|
|
mdio_write(PHY_AUTO_NEGO_REG,
|
|
PHY_Cap_10_Half | PHY_Cap_10_Full |
|
|
PHY_Cap_100_Half | PHY_Cap_100_Full |
|
|
(val & 0x1F));
|
|
|
|
/* enable 1000 Full Mode */
|
|
mdio_write(PHY_1000_CTRL_REG, PHY_Cap_1000_Full);
|
|
|
|
}
|
|
|
|
/* Enable auto-negotiation and restart auto-nigotiation */
|
|
mdio_write(PHY_CTRL_REG,
|
|
PHY_Enable_Auto_Nego | PHY_Restart_Auto_Nego);
|
|
udelay(100);
|
|
|
|
/* wait for auto-negotiation process */
|
|
for (i = 10000; i > 0; i--) {
|
|
/* check if auto-negotiation complete */
|
|
if (mdio_read(PHY_STAT_REG) & PHY_Auto_Nego_Comp) {
|
|
udelay(100);
|
|
option = RTL_R8(PHYstatus);
|
|
if (option & _1000bpsF) {
|
|
#ifdef DEBUG_RTL8169
|
|
printf("%s: 1000Mbps Full-duplex operation.\n",
|
|
name);
|
|
#endif
|
|
} else {
|
|
#ifdef DEBUG_RTL8169
|
|
printf("%s: %sMbps %s-duplex operation.\n",
|
|
name,
|
|
(option & _100bps) ? "100" :
|
|
"10",
|
|
(option & FullDup) ? "Full" :
|
|
"Half");
|
|
#endif
|
|
}
|
|
break;
|
|
} else {
|
|
udelay(100);
|
|
}
|
|
} /* end for-loop to wait for auto-negotiation process */
|
|
|
|
} else {
|
|
udelay(100);
|
|
#ifdef DEBUG_RTL8169
|
|
printf
|
|
("%s: 1000Mbps Full-duplex operation, TBI Link %s!\n",
|
|
name,
|
|
(RTL_R32(TBICSR) & TBILinkOK) ? "OK" : "Failed");
|
|
#endif
|
|
}
|
|
|
|
|
|
tpc->RxDescArray = rtl_alloc_descs(NUM_RX_DESC);
|
|
if (!tpc->RxDescArray)
|
|
return -ENOMEM;
|
|
|
|
tpc->TxDescArray = rtl_alloc_descs(NUM_TX_DESC);
|
|
if (!tpc->TxDescArray)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_DM_ETH
|
|
int rtl8169_initialize(bd_t *bis)
|
|
{
|
|
pci_dev_t devno;
|
|
int card_number = 0;
|
|
struct eth_device *dev;
|
|
u32 iobase;
|
|
int idx=0;
|
|
|
|
while(1){
|
|
unsigned int region;
|
|
u16 device;
|
|
int err;
|
|
|
|
/* Find RTL8169 */
|
|
if ((devno = pci_find_devices(supported, idx++)) < 0)
|
|
break;
|
|
|
|
pci_read_config_word(devno, PCI_DEVICE_ID, &device);
|
|
switch (device) {
|
|
case 0x8168:
|
|
region = 2;
|
|
break;
|
|
|
|
default:
|
|
region = 1;
|
|
break;
|
|
}
|
|
|
|
pci_read_config_dword(devno, PCI_BASE_ADDRESS_0 + (region * 4), &iobase);
|
|
iobase &= ~0xf;
|
|
|
|
debug ("rtl8169: REALTEK RTL8169 @0x%x\n", iobase);
|
|
|
|
dev = (struct eth_device *)malloc(sizeof *dev);
|
|
if (!dev) {
|
|
printf("Can not allocate memory of rtl8169\n");
|
|
break;
|
|
}
|
|
|
|
memset(dev, 0, sizeof(*dev));
|
|
sprintf (dev->name, "RTL8169#%d", card_number);
|
|
|
|
dev->priv = (void *)(unsigned long)devno;
|
|
dev->iobase = (int)pci_mem_to_phys(devno, iobase);
|
|
|
|
dev->init = rtl_reset;
|
|
dev->halt = rtl_halt;
|
|
dev->send = rtl_send;
|
|
dev->recv = rtl_recv;
|
|
|
|
err = rtl_init(dev->iobase, dev->name, dev->enetaddr);
|
|
if (err < 0) {
|
|
printf(pr_fmt("failed to initialize card: %d\n"), err);
|
|
free(dev);
|
|
continue;
|
|
}
|
|
|
|
eth_register (dev);
|
|
|
|
card_number++;
|
|
}
|
|
return card_number;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
static int rtl8169_eth_probe(struct udevice *dev)
|
|
{
|
|
struct pci_child_platdata *pplat = dev_get_parent_platdata(dev);
|
|
struct rtl8169_private *priv = dev_get_priv(dev);
|
|
struct eth_pdata *plat = dev_get_platdata(dev);
|
|
u32 iobase;
|
|
int region;
|
|
int ret;
|
|
|
|
debug("rtl8169: REALTEK RTL8169 @0x%x\n", iobase);
|
|
switch (pplat->device) {
|
|
case 0x8168:
|
|
region = 2;
|
|
break;
|
|
default:
|
|
region = 1;
|
|
break;
|
|
}
|
|
dm_pci_read_config32(dev, PCI_BASE_ADDRESS_0 + region * 4, &iobase);
|
|
iobase &= ~0xf;
|
|
priv->iobase = (int)dm_pci_mem_to_phys(dev, iobase);
|
|
|
|
ret = rtl_init(priv->iobase, dev->name, plat->enetaddr);
|
|
if (ret < 0) {
|
|
printf(pr_fmt("failed to initialize card: %d\n"), ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct eth_ops rtl8169_eth_ops = {
|
|
.start = rtl8169_eth_start,
|
|
.send = rtl8169_eth_send,
|
|
.recv = rtl8169_eth_recv,
|
|
.stop = rtl8169_eth_stop,
|
|
};
|
|
|
|
static const struct udevice_id rtl8169_eth_ids[] = {
|
|
{ .compatible = "realtek,rtl8169" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(eth_rtl8169) = {
|
|
.name = "eth_rtl8169",
|
|
.id = UCLASS_ETH,
|
|
.of_match = rtl8169_eth_ids,
|
|
.probe = rtl8169_eth_probe,
|
|
.ops = &rtl8169_eth_ops,
|
|
.priv_auto_alloc_size = sizeof(struct rtl8169_private),
|
|
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
|
|
};
|
|
|
|
U_BOOT_PCI_DEVICE(eth_rtl8169, supported);
|
|
#endif
|