mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-18 10:44:13 +09:00
20e442ab2d
The current macro is a misnomer since it does not declare a device directly. Instead, it declares driver_info record which U-Boot uses at runtime to create a device. The distinction seems somewhat minor most of the time, but is becomes quite confusing when we actually want to declare a device, with of-platdata. We are left trying to distinguish between a device which isn't actually device, and a device that is (perhaps an 'instance'?) It seems better to rename this macro to describe what it actually is. The macros is not widely used, since boards should use devicetree to declare devices. Rename it to U_BOOT_DRVINFO(), which indicates clearly that this is declaring a new driver_info record, not a device. Signed-off-by: Simon Glass <sjg@chromium.org>
120 lines
2.5 KiB
C
120 lines
2.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Board functions for Sysam AMCORE (MCF5307 based) board
|
|
*
|
|
* (C) Copyright 2016 Angelo Dureghello <angelo@sysam.it>
|
|
*
|
|
* This file copies memory testdram() from sandburst/common/sb_common.c
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <init.h>
|
|
#include <asm/immap.h>
|
|
#include <asm/io.h>
|
|
#include <dm.h>
|
|
#include <dm/platform_data/serial_coldfire.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
void init_lcd(void)
|
|
{
|
|
/* setup for possible K0108 lcd connected on the parallel port */
|
|
sim_t *sim = (sim_t *)(MMAP_SIM);
|
|
|
|
out_be16(&sim->par, 0x300);
|
|
|
|
gpio_t *gpio = (gpio_t *)(MMAP_GPIO);
|
|
|
|
out_be16(&gpio->paddr, 0xfcff);
|
|
out_be16(&gpio->padat, 0x0c00);
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
puts("Board: ");
|
|
puts("AMCORE v.001(alpha)\n");
|
|
|
|
init_lcd();
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* in dram_init we are here executing from flash
|
|
* case 1:
|
|
* is with no ACR/flash cache enabled
|
|
* nop = 40ns (scope measured)
|
|
*/
|
|
void fudelay(int usec)
|
|
{
|
|
while (usec--)
|
|
asm volatile ("nop");
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
u32 dramsize, RC;
|
|
|
|
sdramctrl_t *dc = (sdramctrl_t *)(MMAP_DRAMC);
|
|
|
|
/*
|
|
* SDRAM MT48LC4M32B2 details
|
|
* Memory block 0: 16 MB of SDRAM at address $00000000
|
|
* Port size: 32-bit port
|
|
*
|
|
* Memory block 0 wired as follows:
|
|
* CPU : A15 A14 A13 A12 A11 A10 A9 A17 A18 A19 A20 A21 A22 A23
|
|
* SDRAM : A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 BA0 BA1
|
|
*
|
|
* Ensure that there is a delay of at least 100 microseconds from
|
|
* processor reset to the following code so that the SDRAM is ready
|
|
* for commands.
|
|
*/
|
|
fudelay(100);
|
|
|
|
/*
|
|
* DCR
|
|
* set proper RC as per specification
|
|
*/
|
|
RC = (CONFIG_SYS_CPU_CLK / 1000000) >> 1;
|
|
RC = (RC * 15) >> 4;
|
|
|
|
/* 0x8000 is the faster option */
|
|
out_be16(&dc->dcr, 0x8200 | RC);
|
|
|
|
/*
|
|
* DACR0, page mode continuous, CMD on A20 0x0300
|
|
*/
|
|
out_be32(&dc->dacr0, 0x00003304);
|
|
|
|
dramsize = ((CONFIG_SYS_SDRAM_SIZE)-1) & 0xfffc0000;
|
|
out_be32(&dc->dmr0, dramsize|1);
|
|
|
|
/* issue a PRECHARGE ALL */
|
|
out_be32(&dc->dacr0, 0x0000330c);
|
|
out_be32((u32 *)0x00000004, 0xbeaddeed);
|
|
/* issue AUTOREFRESH */
|
|
out_be32(&dc->dacr0, 0x0000b304);
|
|
/* let refresh occur */
|
|
fudelay(1);
|
|
|
|
out_be32(&dc->dacr0, 0x0000b344);
|
|
out_be32((u32 *)0x00000c00, 0xbeaddeed);
|
|
|
|
gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE,
|
|
CONFIG_SYS_SDRAM_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct coldfire_serial_plat mcf5307_serial_plat = {
|
|
.base = CONFIG_SYS_UART_BASE,
|
|
.port = 0,
|
|
.baudrate = CONFIG_BAUDRATE,
|
|
};
|
|
|
|
U_BOOT_DRVINFO(coldfire_serial) = {
|
|
.name = "serial_coldfire",
|
|
.plat = &mcf5307_serial_plat,
|
|
};
|