Lokesh Vutla c5f177debc ARM: k2g: Add support for dynamic programming of PLL based on SYSCLK ... K2G supports various sysclk frequencies which can be determined using sysboot pins. PLLs should be configured based on this sysclock frequency. Add PLL configurations for all supported sysclk frequencies. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>		2017-05-08 12:34:29 -04:00
..
include/mach	ARM: k2g: Add support for dynamic programming of PLL based on SYSCLK	2017-05-08 12:34:29 -04:00
clock.c	ARM: keystone2: PLL: Enable glitch free initialization sequence	2016-11-13 15:54:36 -05:00
cmd_clock.c	ARM: keystone: rename clk_get_rate() to ks_clk_get_rate()	2016-10-08 09:33:13 -04:00
cmd_ddr3.c	Remove various unused interrupt related code	2017-04-06 20:42:18 -04:00
cmd_mon.c	ARM: keystone2: Add support for parsing monitor header	2016-10-01 20:05:10 -04:00
cmd_poweroff.c	ARM: keystone2: Switch to using the poweroff command	2016-03-16 15:03:32 -04:00
config.mk	ARM: Keystone2: Build secure images for K2	2017-04-08 21:35:05 -04:00
ddr3_spd.c	ARM: keystone2: use detected ddr3a size	2016-03-14 19:18:45 -04:00
ddr3.c	ARM: K2G: DDR3: Fix up priv ID for MPU	2016-12-03 13:21:10 -05:00
init.c	keystone: k2h/e/l: Fix DMA coherency for QM PDSP	2016-07-25 12:00:05 -04:00
Kconfig	ARM: k2g: setup PRU ethernet MAC addresses	2017-03-20 17:57:15 -04:00
keystone.c	ARM: keystone2: Switch to using the poweroff command	2016-03-16 15:03:32 -04:00
Makefile	keystone2: Move target selection to Kconfig	2016-11-28 15:10:34 -05:00
mon.c	arm: mach-keystone: Implements FIT post-processing call for keystone SoCs	2017-04-08 21:35:04 -04:00
msmc.c	ARM: keystone: move SoC sources to mach-keystone	2015-02-21 08:23:52 -05:00
psc.c	treewide: replace #include <asm-generic/errno.h> with <linux/errno.h>	2016-09-23 22:25:27 -04:00