Philippe Schenker c4b650befc board: verdin-imx8mm: Add KSZ9131 phy skew settings ... This patch determines which phy is placed on the board with the PHY ID then it sets the same settings for KSZ9031 as before but for KSZ9131 it enables both RXC and TXC delay lines in the PHY. This will compensate the missing delay from the MAC. Other skew settings are not needed as the traces on board are routed exactly the same length Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Tested-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com>		2020-05-01 13:46:22 +02:00
..
imximage.cfg	board: toradex: Add Verdin iMX8M Mini support	2020-02-09 14:50:52 +01:00
Kconfig	board: toradex: Add Verdin iMX8M Mini support	2020-02-09 14:50:52 +01:00
lpddr4_timing.c	board: toradex: Add Verdin iMX8M Mini support	2020-02-09 14:50:52 +01:00
MAINTAINERS	toradex: MAINTAINERS: entries for new reST docs	2020-03-05 18:19:40 +08:00
Makefile	board: toradex: Add Verdin iMX8M Mini support	2020-02-09 14:50:52 +01:00
spl.c	imx: imx8m*: Remove do_reset from board files	2020-05-01 13:46:22 +02:00
verdin-imx8mm.c	board: verdin-imx8mm: Add KSZ9131 phy skew settings	2020-05-01 13:46:22 +02:00