mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-30 05:48:51 +09:00
![Wolfgang Denk](/assets/img/avatar_default.png)
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not being able to use "sizeof(struct global_data)" in assembler files. Recent experience has shown that manual synchronization is not reliable enough. This patch renames CONFIG_SYS_GBL_DATA_SIZE into GENERATED_GBL_DATA_SIZE which gets automatically generated by the asm-offsets tool. In the result, all definitions of this value can be deleted from the board config files. We have to make sure that all files that reference such data include the new <asm-offsets.h> file. No other changes have been done yet, but it is obvious that similar changes / simplifications can be done for other, related macro definitions as well. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Kumar Gala <galak@kernel.crashing.org>
418 lines
13 KiB
C
418 lines
13 KiB
C
/*
|
|
* (C) Copyright 2004
|
|
* Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de)
|
|
*
|
|
* Support for the Elmeg VoVPN Gateway Module
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/* define cpu used */
|
|
#define CONFIG_MPC8272 1
|
|
|
|
/* define busmode: 8260 */
|
|
#undef CONFIG_BUSMODE_60x
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0xfff00000
|
|
|
|
/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
|
|
#ifdef CONFIG_CLKIN_66MHz
|
|
#define CONFIG_8260_CLKIN 66666666 /* in Hz */
|
|
#else
|
|
#define CONFIG_8260_CLKIN 100000000 /* in Hz */
|
|
#endif
|
|
|
|
/* call board_early_init_f */
|
|
#define CONFIG_BOARD_EARLY_INIT_F 1
|
|
|
|
/* have misc_init_r() function */
|
|
#define CONFIG_MISC_INIT_R 1
|
|
|
|
/* have reset_phy_r() function */
|
|
#define CONFIG_RESET_PHY_R 1
|
|
|
|
/* have special reset function */
|
|
#define CONFIG_HAVE_OWN_RESET 1
|
|
|
|
/* allow serial and ethaddr to be overwritten */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
/* watchdog disabled */
|
|
#undef CONFIG_WATCHDOG
|
|
|
|
/* include support for bzip2 compressed images */
|
|
#undef CONFIG_BZIP2
|
|
|
|
/* status led */
|
|
#undef CONFIG_STATUS_LED /* XXX jse */
|
|
|
|
/* vendor parameter protection */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
/*
|
|
* select serial console configuration
|
|
*
|
|
* if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
|
|
* CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
|
|
* for SCC).
|
|
*/
|
|
#define CONFIG_CONS_ON_SMC
|
|
#undef CONFIG_CONS_ON_SCC
|
|
#undef CONFIG_CONS_NONE
|
|
#define CONFIG_CONS_INDEX 1
|
|
|
|
/* serial port default baudrate */
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
/* echo on for serial download */
|
|
#define CONFIG_LOADS_ECHO 1
|
|
|
|
/* don't allow baudrate change */
|
|
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
|
|
|
|
/* supported baudrates */
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
/*
|
|
* select ethernet configuration
|
|
*
|
|
* if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
|
|
* CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
|
|
* for FCC)
|
|
*
|
|
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
|
|
* defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
|
|
*/
|
|
#undef CONFIG_ETHER_ON_SCC
|
|
#define CONFIG_ETHER_ON_FCC
|
|
#undef CONFIG_ETHER_NONE
|
|
|
|
#ifdef CONFIG_ETHER_ON_FCC
|
|
|
|
/* which SCC/FCC channel for ethernet */
|
|
#define CONFIG_ETHER_INDEX 1
|
|
|
|
/* Marvell Switch SMI base addr */
|
|
#define CONFIG_SYS_PHY_ADDR 0x10
|
|
|
|
/* FCC1 RMII REFCLK is CLK10 */
|
|
#define CONFIG_SYS_CMXFCR_VALUE CMXFCR_TF1CS_CLK10
|
|
#define CONFIG_SYS_CMXFCR_MASK (CMXFCR_FC1|CMXFCR_TF1CS_MSK)
|
|
|
|
/* BDs and buffers on 60x bus */
|
|
#define CONFIG_SYS_CPMFCR_RAMTYPE 0
|
|
|
|
/* Local Protect, Full duplex, Flowcontrol, RMII */
|
|
#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_LPB|FCC_PSMR_FDE|\
|
|
FCC_PSMR_FCE|FCC_PSMR_RMII)
|
|
|
|
/* bit-bang MII PHY management */
|
|
#define CONFIG_BITBANGMII
|
|
|
|
#define MDIO_PORT 1 /* Port B */
|
|
|
|
#define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \
|
|
(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
|
|
#define MDC_DECLARE MDIO_DECLARE
|
|
|
|
#define CONFIG_SYS_MDIO_PIN 0x00002000 /* PB18 */
|
|
#define CONFIG_SYS_MDC_PIN 0x00001000 /* PB19 */
|
|
#define MDIO_ACTIVE (iop->pdir |= CONFIG_SYS_MDIO_PIN)
|
|
#define MDIO_TRISTATE (iop->pdir &= ~CONFIG_SYS_MDIO_PIN)
|
|
#define MDIO_READ ((iop->pdat & CONFIG_SYS_MDIO_PIN) != 0)
|
|
#define MDIO(bit) if(bit) iop->pdat |= CONFIG_SYS_MDIO_PIN; \
|
|
else iop->pdat &= ~CONFIG_SYS_MDIO_PIN
|
|
#define MDC(bit) if(bit) iop->pdat |= CONFIG_SYS_MDC_PIN; \
|
|
else iop->pdat &= ~CONFIG_SYS_MDC_PIN
|
|
#define MIIDELAY udelay(1)
|
|
|
|
#endif
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
|
|
#define CONFIG_CMD_BDI
|
|
#define CONFIG_CMD_CONSOLE
|
|
#define CONFIG_CMD_ECHO
|
|
#define CONFIG_CMD_FLASH
|
|
#define CONFIG_CMD_IMI
|
|
#define CONFIG_CMD_IMLS
|
|
#define CONFIG_CMD_LOADB
|
|
#define CONFIG_CMD_MEMORY
|
|
#define CONFIG_CMD_MISC
|
|
#define CONFIG_CMD_NET
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_RUN
|
|
#define CONFIG_CMD_SAVEENV
|
|
#define CONFIG_CMD_SOURCE
|
|
|
|
|
|
/*
|
|
* boot options & environment
|
|
*/
|
|
#define CONFIG_BOOTDELAY 3
|
|
#define CONFIG_BOOTCOMMAND "run flash_self"
|
|
#undef CONFIG_BOOTARGS
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"clean_nv=erase fff20000 ffffffff\0" \
|
|
"update_boss=tftp 100000 PPC/logic157.bin; protect off fff00000 ffffffff; erase fff00000 ffffffff; cp.b 100000 fff00000 ${filesize}; tftp 100000 PPC/bootmon157.bin; cp.b 100000 fff20000 ${filesize}\0" \
|
|
"update_lx=tftp 100000 ${kernel}; erase ${kernel_addr} ffefffff; cp.b 100000 ${kernel_addr} ${filesize}\0" \
|
|
"update_fs=tftp 100000 ${fs}.${fstype}; erase ff840000 ffdfffff; cp.b 100000 ff840000 ${filesize}\0" \
|
|
"update_ub=tftp 100000 ${uboot}; protect off fff00000 fff1ffff; erase fff00000 fff1ffff; cp.b 100000 fff00000 ${filesize}; protect off ff820000 ff83ffff; erase ff820000 ff83ffff\0" \
|
|
"flashargs=setenv bootargs root=${rootdev} rw rootfstype=${fstype}\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \
|
|
"addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off\0" \
|
|
"addmisc=setenv bootargs ${bootargs} console=${console},${baudrate} ethaddr=${ethaddr} panic=1\0" \
|
|
"net_nfs=tftpboot 400000 ${kernel}; run nfsargs addip addmisc; bootm\0" \
|
|
"net_self=tftpboot 400000 ${kernel}; run flashargs addmisc; bootm\0" \
|
|
"flash_self=run flashargs addmisc; bootm ${kernel_addr}\0" \
|
|
"flash_nfs=run nfsargs addip addmisc; bootm ${kernel_addr}\0" \
|
|
"fstype=cramfs\0" \
|
|
"rootpath=/root_fs\0" \
|
|
"uboot=PPC/u-boot.bin\0" \
|
|
"kernel=PPC/uImage\0" \
|
|
"kernel_addr=ffe00000\0" \
|
|
"fs=PPC/root_fs\0" \
|
|
"console=ttyS0\0" \
|
|
"netdev=eth0\0" \
|
|
"rootdev=31:3\0" \
|
|
"ethaddr=00:09:4f:01:02:03\0" \
|
|
"ipaddr=10.0.0.201\0" \
|
|
"netmask=255.255.255.0\0" \
|
|
"serverip=10.0.0.136\0" \
|
|
"gatewayip=10.0.0.10\0" \
|
|
"hostname=bastard\0" \
|
|
""
|
|
|
|
|
|
/*
|
|
* miscellaneous configurable options
|
|
*/
|
|
|
|
/* undef to save memory */
|
|
#define CONFIG_SYS_LONGHELP
|
|
|
|
/* monitor command prompt */
|
|
#define CONFIG_SYS_PROMPT "=> "
|
|
|
|
/* console i/o buffer size */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CBSIZE 1024
|
|
#else
|
|
#define CONFIG_SYS_CBSIZE 256
|
|
#endif
|
|
|
|
/* print buffer size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
|
|
/* max number of command args */
|
|
#define CONFIG_SYS_MAXARGS 16
|
|
|
|
/* boot argument buffer size */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
|
|
/* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_START 0x00100000
|
|
/* 1 ... 15 MB in DRAM */
|
|
#define CONFIG_SYS_MEMTEST_END 0x00f00000
|
|
/* full featured memtest */
|
|
#define CONFIG_SYS_ALT_MEMTEST
|
|
|
|
/* default load address */
|
|
#define CONFIG_SYS_LOAD_ADDR 0x00100000
|
|
|
|
/* decrementer freq: 1 ms ticks */
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
/* configure flash */
|
|
#define CONFIG_SYS_FLASH_BASE 0xff800000
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 64
|
|
#define CONFIG_SYS_FLASH_SIZE 8
|
|
#undef CONFIG_SYS_FLASH_16BIT
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 240000
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500
|
|
#define CONFIG_SYS_FLASH_LOCK_TOUT 500
|
|
#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000
|
|
#define CONFIG_SYS_FLASH_PROTECTION
|
|
|
|
/* monitor in flash */
|
|
#define CONFIG_SYS_MONITOR_OFFSET 0x00700000
|
|
|
|
/* environment in flash */
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00020000)
|
|
#define CONFIG_ENV_SIZE 0x00020000
|
|
#define CONFIG_ENV_SECT_SIZE 0x00020000
|
|
|
|
/*
|
|
* Initial memory map for linux
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
|
|
|
|
/* hard reset configuration words */
|
|
#ifdef CONFIG_CLKIN_66MHz
|
|
#define CONFIG_SYS_HRCW_MASTER 0x04643050
|
|
#else
|
|
#error NO HRCW FOR 100MHZ SPECIFIED !!!
|
|
#endif
|
|
#define CONFIG_SYS_HRCW_SLAVE1 0x00000000
|
|
#define CONFIG_SYS_HRCW_SLAVE2 0x00000000
|
|
#define CONFIG_SYS_HRCW_SLAVE3 0x00000000
|
|
#define CONFIG_SYS_HRCW_SLAVE4 0x00000000
|
|
#define CONFIG_SYS_HRCW_SLAVE5 0x00000000
|
|
#define CONFIG_SYS_HRCW_SLAVE6 0x00000000
|
|
#define CONFIG_SYS_HRCW_SLAVE7 0x00000000
|
|
|
|
/* internal memory mapped register */
|
|
#define CONFIG_SYS_IMMR 0xF0000000
|
|
|
|
/* definitions for initial stack pointer and data area (in DPRAM) */
|
|
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x2000
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
/*
|
|
* Start addresses for the final memory configuration
|
|
* (Set up by the startup code)
|
|
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
|
|
*/
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
#define CONFIG_SYS_SDRAM_SIZE (32*1024*1024)
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_MONITOR_FLASH (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_OFFSET)
|
|
#define CONFIG_SYS_MONITOR_LEN 0x00020000
|
|
#define CONFIG_SYS_MALLOC_LEN 0x00020000
|
|
|
|
/* cache configuration */
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32 /* for MPC8260 */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of above */
|
|
#endif
|
|
|
|
/*
|
|
* HIDx - Hardware Implementation-dependent Registers
|
|
*-----------------------------------------------------------------------
|
|
* HID0 also contains cache control - initially enable both caches and
|
|
* invalidate contents, then the final state leaves only the instruction
|
|
* cache enabled. Note that Power-On and Hard reset invalidate the caches,
|
|
* but Soft reset does not.
|
|
*
|
|
* HID1 has only read-only information - nothing to set.
|
|
*/
|
|
#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|\
|
|
HID0_ICFI|HID0_DCI|HID0_IFEM|HID0_ABE)
|
|
#define CONFIG_SYS_HID0_FINAL (HID0_IFEM|HID0_ABE)
|
|
#define CONFIG_SYS_HID2 0
|
|
|
|
/* RMR - reset mode register - turn on checkstop reset enable */
|
|
#define CONFIG_SYS_RMR RMR_CSRE
|
|
|
|
/* BCR - bus configuration */
|
|
#define CONFIG_SYS_BCR 0x00000000
|
|
|
|
/* SIUMCR - siu module configuration */
|
|
#define CONFIG_SYS_SIUMCR 0x4905c000
|
|
|
|
/* SYPCR - system protection control */
|
|
#if defined(CONFIG_WATCHDOG)
|
|
#define CONFIG_SYS_SYPCR 0xffffff87
|
|
#else
|
|
#define CONFIG_SYS_SYPCR 0xffffff83
|
|
#endif
|
|
|
|
/* TMCNTSC - time counter status and control */
|
|
/* clear interrupts XXX jse */
|
|
/*#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR) */
|
|
#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|\
|
|
TMCNTSC_TCF|TMCNTSC_TCE)
|
|
|
|
/* PISCR - periodic interrupt status and control */
|
|
/* clear interrupts XXX jse */
|
|
/*#define CONFIG_SYS_PISCR (PISCR_PS) */
|
|
#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
|
|
|
|
/* SCCR - system clock control */
|
|
#define CONFIG_SYS_SCCR 0x000001a9
|
|
|
|
/* RCCR - risc controller configuration */
|
|
#define CONFIG_SYS_RCCR 0
|
|
|
|
/*
|
|
* MEMORY MAP
|
|
* ----------
|
|
* CS0 - FLASH 8MB/8Bit base=0xff800000 (boot: 0xfe000000, 8x mirrored)
|
|
* CS1 - SDRAM 32MB/64Bit base=0x00000000
|
|
* CS2 - DSP/SL1 1MB/16Bit base=0xf0100000
|
|
* CS3 - DSP/SL2 1MB/16Bit base=0xf0200000
|
|
* CS4 - DSP/SL3 1MB/16Bit base=0xf0300000
|
|
* CS5 - DSP/SL4 1MB/16Bit base=0xf0400000
|
|
* CS7 - DPRAM 1KB/8Bit base=0xf0500000, size=32KB (32x mirrored)
|
|
* x - IMMR 384KB base=0xf0000000
|
|
*/
|
|
/* XXX jse 100MHz TODO */
|
|
#define CONFIG_SYS_BR0_PRELIM 0xff800801
|
|
#define CONFIG_SYS_OR0_PRELIM 0xff801e44
|
|
#define CONFIG_SYS_BR1_PRELIM 0x00000041
|
|
#define CONFIG_SYS_OR1_PRELIM 0xfe002ec0
|
|
#if 1
|
|
#define CONFIG_SYS_BR2_PRELIM 0xf0101001
|
|
#define CONFIG_SYS_OR2_PRELIM 0xfff00ef4
|
|
#define CONFIG_SYS_BR3_PRELIM 0xf0201001
|
|
#define CONFIG_SYS_OR3_PRELIM 0xfff00ef4
|
|
#define CONFIG_SYS_BR4_PRELIM 0xf0301001
|
|
#define CONFIG_SYS_OR4_PRELIM 0xfff00ef4
|
|
#define CONFIG_SYS_BR5_PRELIM 0xf0401001
|
|
#define CONFIG_SYS_OR5_PRELIM 0xfff00ef4
|
|
#else
|
|
#define CONFIG_SYS_BR2_PRELIM 0xf0101081
|
|
#define CONFIG_SYS_OR2_PRELIM 0xfff00104
|
|
#define CONFIG_SYS_BR3_PRELIM 0xf0201081
|
|
#define CONFIG_SYS_OR3_PRELIM 0xfff00104
|
|
#define CONFIG_SYS_BR4_PRELIM 0xf0301081
|
|
#define CONFIG_SYS_OR4_PRELIM 0xfff00104
|
|
#define CONFIG_SYS_BR5_PRELIM 0xf0401081
|
|
#define CONFIG_SYS_OR5_PRELIM 0xfff00104
|
|
#endif
|
|
#define CONFIG_SYS_BR7_PRELIM 0xf0500881
|
|
#define CONFIG_SYS_OR7_PRELIM 0xffff8104
|
|
#define CONFIG_SYS_MPTPR 0x2700
|
|
#define CONFIG_SYS_PSDMR 0x822a2452 /* optimal */
|
|
/*#define CONFIG_SYS_PSDMR 0x822a48a3 */ /* relaxed */
|
|
#define CONFIG_SYS_PSRT 0x1a
|
|
|
|
/* "bad" address */
|
|
#define CONFIG_SYS_RESET_ADDRESS 0x40000000
|
|
|
|
#endif /* __CONFIG_H */
|