u-boot-brain/doc/board/freescale/imx8mq_evk.rst
Peng Fan c155f33037 doc: board: Convert i.MX8MQ EVK README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00

57 lines
1.2 KiB
ReStructuredText

.. SPDX-License-Identifier: GPL-2.0+
imx8mq_evk
==========
U-Boot for the NXP i.MX8MQ EVK board
Quick Start
-----------
- Build the ARM Trusted firmware binary
- Get ddr and hdmi fimware
- Build U-Boot
- Boot
Get and Build the ARM Trusted firmware
--------------------------------------
Note: srctree is U-Boot source directory
Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
branch: imx_4.19.35_1.0.0
.. code-block:: bash
$ make PLAT=imx8mq bl31
$ cp build/imx8mq/release/bl31.bin $(builddir)
Get the ddr and hdmi firmware
-----------------------------
.. code-block:: bash
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin
$ chmod +x firmware-imx-7.9.bin
$ ./firmware-imx-7.9.bin
$ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(builddir)
$ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
Build U-Boot
------------
.. code-block:: bash
$ export CROSS_COMPILE=aarch64-poky-linux-
$ make imx8mq_evk_defconfig
$ make flash.bin
Burn the flash.bin to MicroSD card offset 33KB:
.. code-block:: bash
$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 conv=notrunc
Boot
----
Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD.