mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-19 08:28:51 +09:00
![Shyam Saini](/assets/img/avatar_default.png)
's/environemnt/environment/' and 's/Environemnt/Environment/' Signed-off-by: Shyam Saini <shyam@amarulasolutions.com>
979 lines
35 KiB
Plaintext
979 lines
35 KiB
Plaintext
menu "SPL / TPL"
|
|
|
|
config SUPPORT_SPL
|
|
bool
|
|
|
|
config SUPPORT_TPL
|
|
bool
|
|
|
|
config SPL_DFU_NO_RESET
|
|
bool
|
|
|
|
config SPL
|
|
bool
|
|
depends on SUPPORT_SPL
|
|
prompt "Enable SPL"
|
|
help
|
|
If you want to build SPL as well as the normal image, say Y.
|
|
|
|
config SPL_FRAMEWORK
|
|
bool "Support SPL based upon the common SPL framework"
|
|
depends on SPL
|
|
default y
|
|
help
|
|
Enable the SPL framework under common/spl/. This framework
|
|
supports MMC, NAND and YMODEM and other methods loading of U-Boot
|
|
and the Linux Kernel. If unsure, say Y.
|
|
|
|
if SPL
|
|
|
|
config SPL_LDSCRIPT
|
|
string "Linker script for the SPL stage"
|
|
default "arch/$(ARCH)/cpu/u-boot-spl.lds"
|
|
help
|
|
The SPL stage will usually require a different linker-script
|
|
(as it runs from a different memory region) than the regular
|
|
U-Boot stage. Set this to the path of the linker-script to
|
|
be used for SPL.
|
|
|
|
config SPL_BOARD_INIT
|
|
bool "Call board-specific initialization in SPL"
|
|
help
|
|
If this option is enabled, U-Boot will call the function
|
|
spl_board_init() from board_init_r(). This function should be
|
|
provided by the board.
|
|
|
|
config SPL_BOOTROM_SUPPORT
|
|
bool "Support returning to the BOOTROM"
|
|
help
|
|
Some platforms (e.g. the Rockchip RK3368) provide support in their
|
|
ROM for loading the next boot-stage after performing basic setup
|
|
from the SPL stage.
|
|
|
|
Enable this option, to return to the BOOTROM through the
|
|
BOOT_DEVICE_BOOTROM (or fall-through to the next boot device in the
|
|
boot device list, if not implemented for a given board)
|
|
|
|
config SPL_BOOTCOUNT_LIMIT
|
|
bool "Support bootcount in SPL"
|
|
depends on SPL_ENV_SUPPORT
|
|
help
|
|
On some boards, which use 'falcon' mode, it is necessary to check
|
|
and increment the number of boot attempts. Such boards do not
|
|
use proper U-Boot for normal boot flow and hence needs those
|
|
adjustments to be done in the SPL.
|
|
|
|
config SPL_RAW_IMAGE_SUPPORT
|
|
bool "Support SPL loading and booting of RAW images"
|
|
default n if (ARCH_MX6 && (SPL_MMC_SUPPORT || SPL_SATA_SUPPORT))
|
|
default y if !TI_SECURE_DEVICE
|
|
help
|
|
SPL will support loading and booting a RAW image when this option
|
|
is y. If this is not set, SPL will move on to other available
|
|
boot media to find a suitable image.
|
|
|
|
config SPL_LEGACY_IMAGE_SUPPORT
|
|
bool "Support SPL loading and booting of Legacy images"
|
|
default y if !TI_SECURE_DEVICE
|
|
help
|
|
SPL will support loading and booting Legacy images when this option
|
|
is y. If this is not set, SPL will move on to other available
|
|
boot media to find a suitable image.
|
|
|
|
config SPL_SYS_MALLOC_SIMPLE
|
|
bool
|
|
prompt "Only use malloc_simple functions in the SPL"
|
|
help
|
|
Say Y here to only use the *_simple malloc functions from
|
|
malloc_simple.c, rather then using the versions from dlmalloc.c;
|
|
this will make the SPL binary smaller at the cost of more heap
|
|
usage as the *_simple malloc functions do not re-use free-ed mem.
|
|
|
|
config TPL_SYS_MALLOC_SIMPLE
|
|
bool
|
|
prompt "Only use malloc_simple functions in the TPL"
|
|
help
|
|
Say Y here to only use the *_simple malloc functions from
|
|
malloc_simple.c, rather then using the versions from dlmalloc.c;
|
|
this will make the TPL binary smaller at the cost of more heap
|
|
usage as the *_simple malloc functions do not re-use free-ed mem.
|
|
|
|
config SPL_STACK_R
|
|
bool "Enable SDRAM location for SPL stack"
|
|
help
|
|
SPL starts off execution in SRAM and thus typically has only a small
|
|
stack available. Since SPL sets up DRAM while in its board_init_f()
|
|
function, it is possible for the stack to move there before
|
|
board_init_r() is reached. This option enables a special SDRAM
|
|
location for the SPL stack. U-Boot SPL switches to this after
|
|
board_init_f() completes, and before board_init_r() starts.
|
|
|
|
config SPL_STACK_R_ADDR
|
|
depends on SPL_STACK_R
|
|
hex "SDRAM location for SPL stack"
|
|
default 0x82000000 if ARCH_OMAP2PLUS
|
|
help
|
|
Specify the address in SDRAM for the SPL stack. This will be set up
|
|
before board_init_r() is called.
|
|
|
|
config SPL_STACK_R_MALLOC_SIMPLE_LEN
|
|
depends on SPL_STACK_R && SPL_SYS_MALLOC_SIMPLE
|
|
hex "Size of malloc_simple heap after switching to DRAM SPL stack"
|
|
default 0x100000
|
|
help
|
|
Specify the amount of the stack to use as memory pool for
|
|
malloc_simple after switching the stack to DRAM. This may be set
|
|
to give board_init_r() a larger heap then the initial heap in
|
|
SRAM which is limited to SYS_MALLOC_F_LEN bytes.
|
|
|
|
config SPL_SEPARATE_BSS
|
|
bool "BSS section is in a different memory region from text"
|
|
help
|
|
Some platforms need a large BSS region in SPL and can provide this
|
|
because RAM is already set up. In this case BSS can be moved to RAM.
|
|
This option should then be enabled so that the correct device tree
|
|
location is used. Normally we put the device tree at the end of BSS
|
|
but with this option enabled, it goes at _image_binary_end.
|
|
|
|
config SPL_DISABLE_BANNER_PRINT
|
|
bool "Disable output of the SPL banner 'U-Boot SPL ...'"
|
|
help
|
|
If this option is enabled, SPL will not print the banner with version
|
|
info. Selecting this option could be useful to reduce SPL boot time
|
|
(e.g. approx. 6 ms slower, when output on i.MX6 with 115200 baud).
|
|
|
|
config SPL_DISPLAY_PRINT
|
|
bool "Display a board-specific message in SPL"
|
|
help
|
|
If this option is enabled, U-Boot will call the function
|
|
spl_display_print() immediately after displaying the SPL console
|
|
banner ("U-Boot SPL ..."). This function should be provided by
|
|
the board.
|
|
|
|
config SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
|
|
bool "MMC raw mode: by sector"
|
|
default y if ARCH_SUNXI || ARCH_DAVINCI || ARCH_UNIPHIER ||ARCH_MX6 || \
|
|
ARCH_ROCKCHIP || ARCH_MVEBU || ARCH_SOCFPGA || \
|
|
ARCH_AT91 || ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || \
|
|
OMAP44XX || OMAP54XX || AM33XX || AM43XX
|
|
help
|
|
Use sector number for specifying U-Boot location on MMC/SD in
|
|
raw mode.
|
|
|
|
config SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
|
|
hex "Address on the MMC to load U-Boot from"
|
|
depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
|
|
default 0x50 if ARCH_SUNXI
|
|
default 0x75 if ARCH_DAVINCI
|
|
default 0x8a if ARCH_MX6
|
|
default 0x100 if ARCH_UNIPHIER
|
|
default 0x140 if ARCH_MVEBU
|
|
default 0x200 if ARCH_SOCFPGA || ARCH_AT91
|
|
default 0x300 if ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || OMAP44XX || \
|
|
OMAP54XX || AM33XX || AM43XX
|
|
default 0x4000 if ARCH_ROCKCHIP
|
|
help
|
|
Address on the MMC to load U-Boot from, when the MMC is being used
|
|
in raw mode. Units: MMC sectors (1 sector = 512 bytes).
|
|
|
|
config SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
|
|
bool "MMC Raw mode: by partition"
|
|
help
|
|
Use a partition for loading U-Boot when using MMC/SD in raw mode.
|
|
|
|
config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
|
|
hex "Partition to use to load U-Boot from"
|
|
depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
|
|
default 1
|
|
help
|
|
Partition on the MMC to load U-Boot from when the MMC is being
|
|
used in raw mode
|
|
|
|
config SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
|
|
bool "MMC raw mode: by partition type"
|
|
depends on DOS_PARTITION && SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
|
|
help
|
|
Use partition type for specifying U-Boot partition on MMC/SD in
|
|
raw mode. U-Boot will be loaded from the first partition of this
|
|
type to be found.
|
|
|
|
config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE
|
|
hex "Partition Type on the MMC to load U-Boot from"
|
|
depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
|
|
help
|
|
Partition Type on the MMC to load U-Boot from, when the MMC is being
|
|
used in raw mode.
|
|
|
|
config SPL_CRC32_SUPPORT
|
|
bool "Support CRC32"
|
|
depends on SPL_FIT
|
|
help
|
|
Enable this to support CRC32 in FIT images within SPL. This is a
|
|
32-bit checksum value that can be used to verify images. This is
|
|
the least secure type of checksum, suitable for detected
|
|
accidental image corruption. For secure applications you should
|
|
consider SHA1 or SHA256.
|
|
|
|
config SPL_MD5_SUPPORT
|
|
bool "Support MD5"
|
|
depends on SPL_FIT
|
|
help
|
|
Enable this to support MD5 in FIT images within SPL. An MD5
|
|
checksum is a 128-bit hash value used to check that the image
|
|
contents have not been corrupted. Note that MD5 is not considered
|
|
secure as it is possible (with a brute-force attack) to adjust the
|
|
image while still retaining the same MD5 hash value. For secure
|
|
applications where images may be changed maliciously, you should
|
|
consider SHA1 or SHA256.
|
|
|
|
config SPL_SHA1_SUPPORT
|
|
bool "Support SHA1"
|
|
depends on SPL_FIT
|
|
select SHA1
|
|
help
|
|
Enable this to support SHA1 in FIT images within SPL. A SHA1
|
|
checksum is a 160-bit (20-byte) hash value used to check that the
|
|
image contents have not been corrupted or maliciously altered.
|
|
While SHA1 is fairly secure it is coming to the end of its life
|
|
due to the expanding computing power avaiable to brute-force
|
|
attacks. For more security, consider SHA256.
|
|
|
|
config SPL_SHA256_SUPPORT
|
|
bool "Support SHA256"
|
|
depends on SPL_FIT
|
|
select SHA256
|
|
help
|
|
Enable this to support SHA256 in FIT images within SPL. A SHA256
|
|
checksum is a 256-bit (32-byte) hash value used to check that the
|
|
image contents have not been corrupted. SHA256 is recommended for
|
|
use in secure applications since (as at 2016) there is no known
|
|
feasible attack that could produce a 'collision' with differing
|
|
input data. Use this for the highest security. Note that only the
|
|
SHA256 variant is supported: SHA512 and others are not currently
|
|
supported in U-Boot.
|
|
|
|
config SPL_FIT_IMAGE_TINY
|
|
bool "Remove functionality from SPL FIT loading to reduce size"
|
|
depends on SPL_FIT
|
|
default y if MACH_SUN50I || MACH_SUN50I_H5
|
|
help
|
|
Enable this to reduce the size of the FIT image loading code
|
|
in SPL, if space for the SPL binary is very tight.
|
|
|
|
This removes the detection of image types (which forces the
|
|
first image to be treated as having a U-Boot style calling
|
|
convention) and skips the recording of each loaded payload
|
|
(i.e. loadable) into the FDT (modifying the loaded FDT to
|
|
ensure this information is available to the next image
|
|
invoked).
|
|
|
|
config SPL_CPU_SUPPORT
|
|
bool "Support CPU drivers"
|
|
help
|
|
Enable this to support CPU drivers in SPL. These drivers can set
|
|
up CPUs and provide information about them such as the model and
|
|
name. This can be useful in SPL since setting up the CPUs earlier
|
|
may improve boot performance. Enable this option to build the
|
|
drivers in drivers/cpu as part of an SPL build.
|
|
|
|
config SPL_CRYPTO_SUPPORT
|
|
bool "Support crypto drivers"
|
|
help
|
|
Enable crypto drivers in SPL. These drivers can be used to
|
|
accelerate secure boot processing in secure applications. Enable
|
|
this option to build the drivers in drivers/crypto as part of an
|
|
SPL build.
|
|
|
|
config SPL_HASH_SUPPORT
|
|
bool "Support hashing drivers"
|
|
select SHA1
|
|
select SHA256
|
|
help
|
|
Enable hashing drivers in SPL. These drivers can be used to
|
|
accelerate secure boot processing in secure applications. Enable
|
|
this option to build system-specific drivers for hash acceleration
|
|
as part of an SPL build.
|
|
|
|
config SPL_DMA_SUPPORT
|
|
bool "Support DMA drivers"
|
|
help
|
|
Enable DMA (direct-memory-access) drivers in SPL. These drivers
|
|
can be used to handle memory-to-peripheral data transfer without
|
|
the CPU moving the data. Enable this option to build the drivers
|
|
in drivers/dma as part of an SPL build.
|
|
|
|
config SPL_DRIVERS_MISC_SUPPORT
|
|
bool "Support misc drivers"
|
|
help
|
|
Enable miscellaneous drivers in SPL. These drivers perform various
|
|
tasks that don't fall nicely into other categories, Enable this
|
|
option to build the drivers in drivers/misc as part of an SPL
|
|
build, for those that support building in SPL (not all drivers do).
|
|
|
|
config SPL_ENV_SUPPORT
|
|
bool "Support an environment"
|
|
help
|
|
Enable environment support in SPL. The U-Boot environment provides
|
|
a number of settings (essentially name/value pairs) which can
|
|
control many aspects of U-Boot's operation. Normally this is not
|
|
needed in SPL as it has a much simpler task with less
|
|
configuration. But some boards use this to support 'Falcon' boot
|
|
on EXT2 and FAT, where SPL boots directly into Linux without
|
|
starting U-Boot first. Enabling this option will make env_get()
|
|
and env_set() available in SPL.
|
|
|
|
config SPL_SAVEENV
|
|
bool "Support save environment"
|
|
depends on SPL_ENV_SUPPORT
|
|
select SPL_MMC_WRITE if ENV_IS_IN_MMC
|
|
help
|
|
Enable save environment support in SPL after setenv. By default
|
|
the saveenv option is not provided in SPL, but some boards need
|
|
this support in 'Falcon' boot, where SPL need to boot from
|
|
different images based on environment variable set by OS. For
|
|
example OS may set "reboot_image" environment variable to
|
|
"recovery" inorder to boot recovery image by SPL. The SPL read
|
|
"reboot_image" and act accordingly and change the reboot_image
|
|
to default mode using setenv and save the environment.
|
|
|
|
config SPL_ETH_SUPPORT
|
|
bool "Support Ethernet"
|
|
depends on SPL_ENV_SUPPORT
|
|
help
|
|
Enable access to the network subsystem and associated Ethernet
|
|
drivers in SPL. This permits SPL to load U-Boot over an Ethernet
|
|
link rather than from an on-board peripheral. Environment support
|
|
is required since the network stack uses a number of environment
|
|
variables. See also SPL_NET_SUPPORT.
|
|
|
|
config SPL_EXT_SUPPORT
|
|
bool "Support EXT filesystems"
|
|
help
|
|
Enable support for EXT2/3/4 filesystems with SPL. This permits
|
|
U-Boot (or Linux in Falcon mode) to be loaded from an EXT
|
|
filesystem from within SPL. Support for the underlying block
|
|
device (e.g. MMC or USB) must be enabled separately.
|
|
|
|
config SPL_FAT_SUPPORT
|
|
bool "Support FAT filesystems"
|
|
select FS_FAT
|
|
help
|
|
Enable support for FAT and VFAT filesystems with SPL. This
|
|
permits U-Boot (or Linux in Falcon mode) to be loaded from a FAT
|
|
filesystem from within SPL. Support for the underlying block
|
|
device (e.g. MMC or USB) must be enabled separately.
|
|
|
|
config SPL_FPGA_SUPPORT
|
|
bool "Support FPGAs"
|
|
help
|
|
Enable support for FPGAs in SPL. Field-programmable Gate Arrays
|
|
provide software-configurable hardware which is typically used to
|
|
implement peripherals (such as UARTs, LCD displays, MMC) or
|
|
accelerate custom processing functions, such as image processing
|
|
or machine learning. Sometimes it is useful to program the FPGA
|
|
as early as possible during boot, and this option can enable that
|
|
within SPL.
|
|
|
|
config SPL_GPIO_SUPPORT
|
|
bool "Support GPIO"
|
|
help
|
|
Enable support for GPIOs (General-purpose Input/Output) in SPL.
|
|
GPIOs allow U-Boot to read the state of an input line (high or
|
|
low) and set the state of an output line. This can be used to
|
|
drive LEDs, control power to various system parts and read user
|
|
input. GPIOs can be useful in SPL to enable a 'sign-of-life' LED,
|
|
for example. Enable this option to build the drivers in
|
|
drivers/gpio as part of an SPL build.
|
|
|
|
config SPL_I2C_SUPPORT
|
|
bool "Support I2C"
|
|
help
|
|
Enable support for the I2C (Inter-Integrated Circuit) bus in SPL.
|
|
I2C works with a clock and data line which can be driven by a
|
|
one or more masters or slaves. It is a fairly complex bus but is
|
|
widely used as it only needs two lines for communication. Speeds of
|
|
400kbps are typical but up to 3.4Mbps is supported by some
|
|
hardware. I2C can be useful in SPL to configure power management
|
|
ICs (PMICs) before raising the CPU clock speed, for example.
|
|
Enable this option to build the drivers in drivers/i2c as part of
|
|
an SPL build.
|
|
|
|
config SPL_LIBCOMMON_SUPPORT
|
|
bool "Support common libraries"
|
|
help
|
|
Enable support for common U-Boot libraries within SPL. These
|
|
libraries include common code to deal with U-Boot images,
|
|
environment and USB, for example. This option is enabled on many
|
|
boards. Enable this option to build the code in common/ as part of
|
|
an SPL build.
|
|
|
|
config SPL_LIBDISK_SUPPORT
|
|
bool "Support disk paritions"
|
|
help
|
|
Enable support for disk partitions within SPL. 'Disk' is something
|
|
of a misnomer as it includes non-spinning media such as flash (as
|
|
used in MMC and USB sticks). Partitions provide a way for a disk
|
|
to be split up into separate regions, with a partition table placed
|
|
at the start or end which describes the location and size of each
|
|
'partition'. These partitions are typically uses as individual block
|
|
devices, typically with an EXT2 or FAT filesystem in each. This
|
|
option enables whatever partition support has been enabled in
|
|
U-Boot to also be used in SPL. It brings in the code in disk/.
|
|
|
|
config SPL_LIBGENERIC_SUPPORT
|
|
bool "Support generic libraries"
|
|
help
|
|
Enable support for generic U-Boot libraries within SPL. These
|
|
libraries include generic code to deal with device tree, hashing,
|
|
printf(), compression and the like. This option is enabled on many
|
|
boards. Enable this option to build the code in lib/ as part of an
|
|
SPL build.
|
|
|
|
config SPL_MMC_SUPPORT
|
|
bool "Support MMC"
|
|
depends on MMC
|
|
help
|
|
Enable support for MMC (Multimedia Card) within SPL. This enables
|
|
the MMC protocol implementation and allows any enabled drivers to
|
|
be used within SPL. MMC can be used with or without disk partition
|
|
support depending on the application (SPL_LIBDISK_SUPPORT). Enable
|
|
this option to build the drivers in drivers/mmc as part of an SPL
|
|
build.
|
|
|
|
config SPL_MMC_WRITE
|
|
bool "MMC/SD/SDIO card support for write operations in SPL"
|
|
depends on SPL_MMC_SUPPORT
|
|
default n
|
|
help
|
|
Enable write access to MMC and SD Cards in SPL
|
|
|
|
|
|
config SPL_MPC8XXX_INIT_DDR_SUPPORT
|
|
bool "Support MPC8XXX DDR init"
|
|
help
|
|
Enable support for DDR-SDRAM (double-data-rate synchronous dynamic
|
|
random-access memory) on the MPC8XXX family within SPL. This
|
|
allows DRAM to be set up before loading U-Boot into that DRAM,
|
|
where it can run.
|
|
|
|
config SPL_MTD_SUPPORT
|
|
bool "Support MTD drivers"
|
|
help
|
|
Enable support for MTD (Memory Technology Device) within SPL. MTD
|
|
provides a block interface over raw NAND and can also be used with
|
|
SPI flash. This allows SPL to load U-Boot from supported MTD
|
|
devices. See SPL_NAND_SUPPORT and SPL_ONENAND_SUPPORT for how
|
|
to enable specific MTD drivers.
|
|
|
|
config SPL_MUSB_NEW_SUPPORT
|
|
bool "Support new Mentor Graphics USB"
|
|
help
|
|
Enable support for Mentor Graphics USB in SPL. This is a new
|
|
driver used by some boards. Enable this option to build
|
|
the drivers in drivers/usb/musb-new as part of an SPL build. The
|
|
old drivers are in drivers/usb/musb.
|
|
|
|
config SPL_NAND_SUPPORT
|
|
bool "Support NAND flash"
|
|
help
|
|
Enable support for NAND (Negative AND) flash in SPL. NAND flash
|
|
can be used to allow SPL to load U-Boot from supported devices.
|
|
This enables the drivers in drivers/mtd/nand as part of an SPL
|
|
build.
|
|
|
|
config SPL_NET_SUPPORT
|
|
bool "Support networking"
|
|
help
|
|
Enable support for network devices (such as Ethernet) in SPL.
|
|
This permits SPL to load U-Boot over a network link rather than
|
|
from an on-board peripheral. Environment support is required since
|
|
the network stack uses a number of environment variables. See also
|
|
SPL_ETH_SUPPORT.
|
|
|
|
if SPL_NET_SUPPORT
|
|
config SPL_NET_VCI_STRING
|
|
string "BOOTP Vendor Class Identifier string sent by SPL"
|
|
help
|
|
As defined by RFC 2132 the vendor class identifier field can be
|
|
sent by the client to identify the vendor type and configuration
|
|
of a client. This is often used in practice to allow for the DHCP
|
|
server to specify different files to load depending on if the ROM,
|
|
SPL or U-Boot itself makes the request
|
|
endif # if SPL_NET_SUPPORT
|
|
|
|
config SPL_NO_CPU_SUPPORT
|
|
bool "Drop CPU code in SPL"
|
|
help
|
|
This is specific to the ARM926EJ-S CPU. It disables the standard
|
|
start.S start-up code, presumably so that a replacement can be
|
|
used on that CPU. You should not enable it unless you know what
|
|
you are doing.
|
|
|
|
config SPL_NOR_SUPPORT
|
|
bool "Support NOR flash"
|
|
help
|
|
Enable support for loading U-Boot from memory-mapped NOR (Negative
|
|
OR) flash in SPL. NOR flash is slow to write but fast to read, and
|
|
a memory-mapped device makes it very easy to access. Loading from
|
|
NOR is typically achieved with just a memcpy().
|
|
|
|
config SPL_XIP_SUPPORT
|
|
bool "Support XIP"
|
|
depends on SPL
|
|
help
|
|
Enable support for execute in place of U-Boot or kernel image. There
|
|
is no need to copy image from flash to ram if flash supports execute
|
|
in place. Its very useful in systems having enough flash but not
|
|
enough ram to load the image.
|
|
|
|
config SPL_ONENAND_SUPPORT
|
|
bool "Support OneNAND flash"
|
|
help
|
|
Enable support for OneNAND (Negative AND) flash in SPL. OneNAND is
|
|
a type of NAND flash and therefore can be used to allow SPL to
|
|
load U-Boot from supported devices. This enables the drivers in
|
|
drivers/mtd/onenand as part of an SPL build.
|
|
|
|
config SPL_OS_BOOT
|
|
bool "Activate Falcon Mode"
|
|
depends on !TI_SECURE_DEVICE
|
|
default n
|
|
help
|
|
Enable booting directly to an OS from SPL.
|
|
for more info read doc/README.falcon
|
|
|
|
if SPL_OS_BOOT
|
|
config SYS_OS_BASE
|
|
hex "addr, where OS is found"
|
|
depends on SPL_NOR_SUPPORT
|
|
help
|
|
Specify the address, where the OS image is found, which
|
|
gets booted.
|
|
|
|
endif # SPL_OS_BOOT
|
|
|
|
config SPL_PCI_SUPPORT
|
|
bool "Support PCI drivers"
|
|
help
|
|
Enable support for PCI in SPL. For platforms that need PCI to boot,
|
|
or must perform some init using PCI in SPL, this provides the
|
|
necessary driver support. This enables the drivers in drivers/pci
|
|
as part of an SPL build.
|
|
|
|
config SPL_PCH_SUPPORT
|
|
bool "Support PCH drivers"
|
|
help
|
|
Enable support for PCH (Platform Controller Hub) devices in SPL.
|
|
These are used to set up GPIOs and the SPI peripheral early in
|
|
boot. This enables the drivers in drivers/pch as part of an SPL
|
|
build.
|
|
|
|
config SPL_POST_MEM_SUPPORT
|
|
bool "Support POST drivers"
|
|
help
|
|
Enable support for POST (Power-on Self Test) in SPL. POST is a
|
|
procedure that checks that the hardware (CPU or board) appears to
|
|
be functionally correctly. It is a sanity check that can be
|
|
performed before booting. This enables the drivers in post/drivers
|
|
as part of an SPL build.
|
|
|
|
config SPL_RESET_SUPPORT
|
|
bool "Support reset drivers"
|
|
depends on SPL
|
|
help
|
|
Enable support for reset control in SPL.
|
|
That can be useful in SPL to handle IP reset in driver, as in U-Boot,
|
|
by using the generic reset API provided by driver model.
|
|
This enables the drivers in drivers/reset as part of an SPL build.
|
|
|
|
config SPL_POWER_SUPPORT
|
|
bool "Support power drivers"
|
|
help
|
|
Enable support for power control in SPL. This includes support
|
|
for PMICs (Power-management Integrated Circuits) and some of the
|
|
features provided by PMICs. In particular, voltage regulators can
|
|
be used to enable/disable power and vary its voltage. That can be
|
|
useful in SPL to turn on boot peripherals and adjust CPU voltage
|
|
so that the clock speed can be increased. This enables the drivers
|
|
in drivers/power, drivers/power/pmic and drivers/power/regulator
|
|
as part of an SPL build.
|
|
|
|
config SPL_RAM_SUPPORT
|
|
bool "Support booting from RAM"
|
|
default y if MICROBLAZE || ARCH_SOCFPGA || TEGRA || ARCH_ZYNQ
|
|
help
|
|
Enable booting of an image in RAM. The image can be preloaded or
|
|
it can be loaded by SPL directly into RAM (e.g. using USB).
|
|
|
|
config SPL_RAM_DEVICE
|
|
bool "Support booting from preloaded image in RAM"
|
|
depends on SPL_RAM_SUPPORT
|
|
default y if MICROBLAZE || ARCH_SOCFPGA || TEGRA || ARCH_ZYNQ
|
|
help
|
|
Enable booting of an image already loaded in RAM. The image has to
|
|
be already in memory when SPL takes over, e.g. loaded by the boot
|
|
ROM.
|
|
|
|
config SPL_RTC_SUPPORT
|
|
bool "Support RTC drivers"
|
|
help
|
|
Enable RTC (Real-time Clock) support in SPL. This includes support
|
|
for reading and setting the time. Some RTC devices also have some
|
|
non-volatile (battery-backed) memory which is accessible if
|
|
needed. This enables the drivers in drivers/rtc as part of an SPL
|
|
build.
|
|
|
|
config SPL_SATA_SUPPORT
|
|
bool "Support loading from SATA"
|
|
help
|
|
Enable support for SATA (Serial AT attachment) in SPL. This allows
|
|
use of SATA devices such as hard drives and flash drivers for
|
|
loading U-Boot. SATA is used in higher-end embedded systems and
|
|
can provide higher performance than MMC , at somewhat higher
|
|
expense and power consumption. This enables loading from SATA
|
|
using a configured device.
|
|
|
|
config SPL_SERIAL_SUPPORT
|
|
bool "Support serial"
|
|
select SPL_PRINTF
|
|
select SPL_STRTO
|
|
help
|
|
Enable support for serial in SPL. This allows use of a serial UART
|
|
for displaying messages while SPL is running. It also brings in
|
|
printf() and panic() functions. This should normally be enabled
|
|
unless there are space reasons not to. Even then, consider
|
|
enabling USE_TINY_PRINTF which is a small printf() version.
|
|
|
|
config SPL_SPI_FLASH_SUPPORT
|
|
bool "Support SPI flash drivers"
|
|
help
|
|
Enable support for using SPI flash in SPL, and loading U-Boot from
|
|
SPI flash. SPI flash (Serial Peripheral Bus flash) is named after
|
|
the SPI bus that is used to connect it to a system. It is a simple
|
|
but fast bidirectional 4-wire bus (clock, chip select and two data
|
|
lines). This enables the drivers in drivers/mtd/spi as part of an
|
|
SPL build. This normally requires SPL_SPI_SUPPORT.
|
|
|
|
config SPL_SPI_LOAD
|
|
bool "Support loading from SPI flash"
|
|
depends on SPL_SPI_FLASH_SUPPORT
|
|
help
|
|
Enable support for loading next stage, U-Boot or otherwise, from
|
|
SPI NOR in U-Boot SPL.
|
|
|
|
config SPL_SPI_SUPPORT
|
|
bool "Support SPI drivers"
|
|
help
|
|
Enable support for using SPI in SPL. This is used for connecting
|
|
to SPI flash for loading U-Boot. See SPL_SPI_FLASH_SUPPORT for
|
|
more details on that. The SPI driver provides the transport for
|
|
data between the SPI flash and the CPU. This option can be used to
|
|
enable SPI drivers that are needed for other purposes also, such
|
|
as a SPI PMIC.
|
|
|
|
config SPL_THERMAL
|
|
bool "Driver support for thermal devices"
|
|
help
|
|
Enable support for temperature-sensing devices. Some SoCs have on-chip
|
|
temperature sensors to permit warnings, speed throttling or even
|
|
automatic power-off when the temperature gets too high or low. Other
|
|
devices may be discrete but connected on a suitable bus.
|
|
|
|
config SPL_USB_HOST_SUPPORT
|
|
bool "Support USB host drivers"
|
|
help
|
|
Enable access to USB (Universal Serial Bus) host devices so that
|
|
SPL can load U-Boot from a connected USB peripheral, such as a USB
|
|
flash stick. While USB takes a little longer to start up than most
|
|
buses, it is very flexible since many different types of storage
|
|
device can be attached. This option enables the drivers in
|
|
drivers/usb/host as part of an SPL build.
|
|
|
|
config SPL_USB_SUPPORT
|
|
bool "Support loading from USB"
|
|
depends on SPL_USB_HOST_SUPPORT
|
|
help
|
|
Enable support for USB devices in SPL. This allows use of USB
|
|
devices such as hard drives and flash drivers for loading U-Boot.
|
|
The actual drivers are enabled separately using the normal U-Boot
|
|
config options. This enables loading from USB using a configured
|
|
device.
|
|
|
|
config SPL_USB_GADGET_SUPPORT
|
|
bool "Suppport USB Gadget drivers"
|
|
help
|
|
Enable USB Gadget API which allows to enable USB device functions
|
|
in SPL.
|
|
|
|
if SPL_USB_GADGET_SUPPORT
|
|
|
|
config SPL_USB_ETHER
|
|
bool "Support USB Ethernet drivers"
|
|
help
|
|
Enable access to the USB network subsystem and associated
|
|
drivers in SPL. This permits SPL to load U-Boot over a
|
|
USB-connected Ethernet link (such as a USB Ethernet dongle) rather
|
|
than from an onboard peripheral. Environment support is required
|
|
since the network stack uses a number of environment variables.
|
|
See also SPL_NET_SUPPORT and SPL_ETH_SUPPORT.
|
|
|
|
config SPL_DFU_SUPPORT
|
|
bool "Support DFU (Device Firmware Upgarde)"
|
|
select SPL_HASH_SUPPORT
|
|
select SPL_DFU_NO_RESET
|
|
depends on SPL_RAM_SUPPORT
|
|
help
|
|
This feature enables the DFU (Device Firmware Upgarde) in SPL with
|
|
RAM memory device support. The ROM code will load and execute
|
|
the SPL built with dfu. The user can load binaries (u-boot/kernel) to
|
|
selected device partition from host-pc using dfu-utils.
|
|
This feature is useful to flash the binaries to factory or bare-metal
|
|
boards using USB interface.
|
|
|
|
choice
|
|
bool "DFU device selection"
|
|
depends on SPL_DFU_SUPPORT
|
|
|
|
config SPL_DFU_RAM
|
|
bool "RAM device"
|
|
depends on SPL_DFU_SUPPORT && SPL_RAM_SUPPORT
|
|
help
|
|
select RAM/DDR memory device for loading binary images
|
|
(u-boot/kernel) to the selected device partition using
|
|
DFU and execute the u-boot/kernel from RAM.
|
|
|
|
endchoice
|
|
|
|
config SPL_USB_SDP_SUPPORT
|
|
bool "Support SDP (Serial Download Protocol)"
|
|
help
|
|
Enable Serial Download Protocol (SDP) device support in SPL. This
|
|
allows to download images into memory and execute (jump to) them
|
|
using the same protocol as implemented by the i.MX family's boot ROM.
|
|
endif
|
|
|
|
config SPL_WATCHDOG_SUPPORT
|
|
bool "Support watchdog drivers"
|
|
help
|
|
Enable support for watchdog drivers in SPL. A watchdog is
|
|
typically a hardware peripheral which can reset the system when it
|
|
detects no activity for a while (such as a software crash). This
|
|
enables the drivers in drivers/watchdog as part of an SPL build.
|
|
|
|
config SPL_YMODEM_SUPPORT
|
|
bool "Support loading using Ymodem"
|
|
depends on SPL_SERIAL_SUPPORT
|
|
help
|
|
While loading from serial is slow it can be a useful backup when
|
|
there is no other option. The Ymodem protocol provides a reliable
|
|
means of transmitting U-Boot over a serial line for using in SPL,
|
|
with a checksum to ensure correctness.
|
|
|
|
config SPL_ATF
|
|
bool "Support ARM Trusted Firmware"
|
|
depends on ARM64
|
|
help
|
|
ATF(ARM Trusted Firmware) is a component for ARM AArch64 which
|
|
is loaded by SPL (which is considered as BL2 in ATF terminology).
|
|
More detail at: https://github.com/ARM-software/arm-trusted-firmware
|
|
|
|
config SPL_ATF_NO_PLATFORM_PARAM
|
|
bool "Pass no platform parameter"
|
|
depends on SPL_ATF
|
|
help
|
|
While we expect to call a pointer to a valid FDT (or NULL)
|
|
as the platform parameter to an ATF, some ATF versions are
|
|
not U-Boot aware and have an insufficiently robust parameter
|
|
validation to gracefully reject a FDT being passed.
|
|
|
|
If this option is enabled, the spl_atf os-type handler will
|
|
always pass NULL for the platform parameter.
|
|
|
|
If your ATF is affected, say Y.
|
|
|
|
config SPL_AM33XX_ENABLE_RTC32K_OSC
|
|
bool "Enable the RTC32K OSC on AM33xx based platforms"
|
|
default y if AM33XX
|
|
help
|
|
Enable access to the AM33xx RTC and select the external 32kHz clock
|
|
source.
|
|
|
|
config TPL
|
|
bool
|
|
depends on SUPPORT_TPL
|
|
prompt "Enable TPL"
|
|
help
|
|
If you want to build TPL as well as the normal image and SPL, say Y.
|
|
|
|
if TPL
|
|
|
|
config TPL_BOARD_INIT
|
|
bool "Call board-specific initialization in TPL"
|
|
help
|
|
If this option is enabled, U-Boot will call the function
|
|
spl_board_init() from board_init_r(). This function should be
|
|
provided by the board.
|
|
|
|
config TPL_LDSCRIPT
|
|
string "Linker script for the TPL stage"
|
|
depends on TPL
|
|
help
|
|
The TPL stage will usually require a different linker-script
|
|
(as it runs from a different memory region) than the regular
|
|
U-Boot stage. Set this to the path of the linker-script to
|
|
be used for TPL.
|
|
|
|
May be left empty to trigger the Makefile infrastructure to
|
|
fall back to the linker-script used for the SPL stage.
|
|
|
|
config TPL_NEEDS_SEPARATE_TEXT_BASE
|
|
bool "TPL needs a separate text-base"
|
|
default n
|
|
depends on TPL
|
|
help
|
|
Enable, if the TPL stage should not inherit its text-base
|
|
from the SPL stage. When enabled, a base address for the
|
|
.text sections of the TPL stage has to be set below.
|
|
|
|
config TPL_NEEDS_SEPARATE_STACK
|
|
bool "TPL needs a separate initial stack-pointer"
|
|
default n
|
|
depends on TPL
|
|
help
|
|
Enable, if the TPL stage should not inherit its initial
|
|
stack-pointer from the settings for the SPL stage.
|
|
|
|
config TPL_TEXT_BASE
|
|
hex "Base address for the .text section of the TPL stage"
|
|
depends on TPL_NEEDS_SEPARATE_TEXT_BASE
|
|
help
|
|
The base address for the .text section of the TPL stage.
|
|
|
|
config TPL_MAX_SIZE
|
|
int "Maximum size (in bytes) for the TPL stage"
|
|
default 0
|
|
depends on TPL
|
|
help
|
|
The maximum size (in bytes) of the TPL stage.
|
|
|
|
config TPL_STACK
|
|
hex "Address of the initial stack-pointer for the TPL stage"
|
|
depends on TPL_NEEDS_SEPARATE_STACK
|
|
help
|
|
The address of the initial stack-pointer for the TPL stage.
|
|
Usually this will be the (aligned) top-of-stack.
|
|
|
|
config TPL_BOOTROM_SUPPORT
|
|
bool "Support returning to the BOOTROM (from TPL)"
|
|
help
|
|
Some platforms (e.g. the Rockchip RK3368) provide support in their
|
|
ROM for loading the next boot-stage after performing basic setup
|
|
from the TPL stage.
|
|
|
|
Enable this option, to return to the BOOTROM through the
|
|
BOOT_DEVICE_BOOTROM (or fall-through to the next boot device in the
|
|
boot device list, if not implemented for a given board)
|
|
|
|
config TPL_DRIVERS_MISC_SUPPORT
|
|
bool "Support misc drivers in TPL"
|
|
help
|
|
Enable miscellaneous drivers in TPL. These drivers perform various
|
|
tasks that don't fall nicely into other categories, Enable this
|
|
option to build the drivers in drivers/misc as part of an TPL
|
|
build, for those that support building in TPL (not all drivers do).
|
|
|
|
config TPL_ENV_SUPPORT
|
|
bool "Support an environment"
|
|
help
|
|
Enable environment support in TPL. See SPL_ENV_SUPPORT for details.
|
|
|
|
config TPL_I2C_SUPPORT
|
|
bool "Support I2C"
|
|
help
|
|
Enable support for the I2C bus in TPL. See SPL_I2C_SUPPORT for
|
|
details.
|
|
|
|
config TPL_LIBCOMMON_SUPPORT
|
|
bool "Support common libraries"
|
|
help
|
|
Enable support for common U-Boot libraries within TPL. See
|
|
SPL_LIBCOMMON_SUPPORT for details.
|
|
|
|
config TPL_LIBGENERIC_SUPPORT
|
|
bool "Support generic libraries"
|
|
help
|
|
Enable support for generic U-Boot libraries within TPL. See
|
|
SPL_LIBGENERIC_SUPPORT for details.
|
|
|
|
config TPL_MPC8XXX_INIT_DDR_SUPPORT
|
|
bool "Support MPC8XXX DDR init"
|
|
help
|
|
Enable support for DDR-SDRAM on the MPC8XXX family within TPL. See
|
|
SPL_MPC8XXX_INIT_DDR_SUPPORT for details.
|
|
|
|
config TPL_MMC_SUPPORT
|
|
bool "Support MMC"
|
|
depends on MMC
|
|
help
|
|
Enable support for MMC within TPL. See SPL_MMC_SUPPORT for details.
|
|
|
|
config TPL_NAND_SUPPORT
|
|
bool "Support NAND flash"
|
|
help
|
|
Enable support for NAND in TPL. See SPL_NAND_SUPPORT for details.
|
|
|
|
config TPL_RAM_SUPPORT
|
|
bool "Support booting from RAM"
|
|
help
|
|
Enable booting of an image in RAM. The image can be preloaded or
|
|
it can be loaded by TPL directly into RAM (e.g. using USB).
|
|
|
|
config TPL_RAM_DEVICE
|
|
bool "Support booting from preloaded image in RAM"
|
|
depends on TPL_RAM_SUPPORT
|
|
help
|
|
Enable booting of an image already loaded in RAM. The image has to
|
|
be already in memory when TPL takes over, e.g. loaded by the boot
|
|
ROM.
|
|
|
|
config TPL_SERIAL_SUPPORT
|
|
bool "Support serial"
|
|
select TPL_PRINTF
|
|
select TPL_STRTO
|
|
help
|
|
Enable support for serial in TPL. See SPL_SERIAL_SUPPORT for
|
|
details.
|
|
|
|
config TPL_SPI_FLASH_SUPPORT
|
|
bool "Support SPI flash drivers"
|
|
help
|
|
Enable support for using SPI flash in TPL. See SPL_SPI_FLASH_SUPPORT
|
|
for details.
|
|
|
|
config TPL_SPI_LOAD
|
|
bool "Support loading from SPI flash"
|
|
depends on TPL_SPI_FLASH_SUPPORT
|
|
help
|
|
Enable support for loading next stage, U-Boot or otherwise, from
|
|
SPI NOR in U-Boot TPL.
|
|
|
|
config TPL_SPI_SUPPORT
|
|
bool "Support SPI drivers"
|
|
help
|
|
Enable support for using SPI in TPL. See SPL_SPI_SUPPORT for
|
|
details.
|
|
|
|
config TPL_YMODEM_SUPPORT
|
|
bool "Support loading using Ymodem"
|
|
depends on TPL_SERIAL_SUPPORT
|
|
help
|
|
While loading from serial is slow it can be a useful backup when
|
|
there is no other option. The Ymodem protocol provides a reliable
|
|
means of transmitting U-Boot over a serial line for using in TPL,
|
|
with a checksum to ensure correctness.
|
|
|
|
endif # TPL
|
|
|
|
endif # SPL
|
|
endmenu
|