mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-04 03:43:19 +09:00
![Simon Glass](/assets/img/avatar_default.png)
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
232 lines
6.0 KiB
C
232 lines
6.0 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* K+P iMX6Q KP_IMX6Q_TPC board configuration
|
|
*
|
|
* Copyright (C) 2018 Lukasz Majewski <lukma@denx.de>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <init.h>
|
|
#include <log.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/mx6-ddr.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/io.h>
|
|
#include <errno.h>
|
|
#include <spl.h>
|
|
#include <linux/delay.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static void ccgr_init(void)
|
|
{
|
|
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
|
|
writel(0x00C03F3F, &ccm->CCGR0);
|
|
writel(0x0030FC03, &ccm->CCGR1);
|
|
writel(0x0FFFC000, &ccm->CCGR2);
|
|
writel(0x3FF00000, &ccm->CCGR3);
|
|
writel(0x00FFF300, &ccm->CCGR4);
|
|
writel(0x0F0000C3, &ccm->CCGR5);
|
|
writel(0x000003FF, &ccm->CCGR6);
|
|
}
|
|
|
|
/* DDR3 */
|
|
static const struct mx6dq_iomux_ddr_regs mx6_ddr_ioregs = {
|
|
.dram_sdclk_0 = 0x00000030,
|
|
.dram_sdclk_1 = 0x00000030,
|
|
.dram_cas = 0x00000030,
|
|
.dram_ras = 0x00000030,
|
|
.dram_reset = 0x00000030,
|
|
.dram_sdcke0 = 0x00003000,
|
|
.dram_sdcke1 = 0x00003000,
|
|
.dram_sdba2 = 0x00000000,
|
|
.dram_sdodt0 = 0x00000030,
|
|
.dram_sdodt1 = 0x00000030,
|
|
|
|
.dram_sdqs0 = 0x00000018,
|
|
.dram_sdqs1 = 0x00000018,
|
|
.dram_sdqs2 = 0x00000018,
|
|
.dram_sdqs3 = 0x00000018,
|
|
.dram_sdqs4 = 0x00000018,
|
|
.dram_sdqs5 = 0x00000018,
|
|
.dram_sdqs6 = 0x00000018,
|
|
.dram_sdqs7 = 0x00000018,
|
|
|
|
.dram_dqm0 = 0x00000018,
|
|
.dram_dqm1 = 0x00000018,
|
|
.dram_dqm2 = 0x00000018,
|
|
.dram_dqm3 = 0x00000018,
|
|
.dram_dqm4 = 0x00000018,
|
|
.dram_dqm5 = 0x00000018,
|
|
.dram_dqm6 = 0x00000018,
|
|
.dram_dqm7 = 0x00000018,
|
|
};
|
|
|
|
static const struct mx6dq_iomux_grp_regs mx6_grp_ioregs = {
|
|
.grp_ddr_type = 0x000c0000,
|
|
.grp_ddrmode_ctl = 0x00020000,
|
|
.grp_ddrpke = 0x00000000,
|
|
.grp_addds = 0x00000030,
|
|
.grp_ctlds = 0x00000030,
|
|
.grp_ddrmode = 0x00020000,
|
|
.grp_b0ds = 0x00000018,
|
|
.grp_b1ds = 0x00000018,
|
|
.grp_b2ds = 0x00000018,
|
|
.grp_b3ds = 0x00000018,
|
|
.grp_b4ds = 0x00000018,
|
|
.grp_b5ds = 0x00000018,
|
|
.grp_b6ds = 0x00000018,
|
|
.grp_b7ds = 0x00000018,
|
|
};
|
|
|
|
static const struct mx6_mmdc_calibration mx6_4x256mx16_mmdc_calib = {
|
|
.p0_mpwldectrl0 = 0x001F001F,
|
|
.p0_mpwldectrl1 = 0x001F001F,
|
|
.p1_mpwldectrl0 = 0x001F001F,
|
|
.p1_mpwldectrl1 = 0x001F001F,
|
|
.p0_mpdgctrl0 = 0x43270338,
|
|
.p0_mpdgctrl1 = 0x03200314,
|
|
.p1_mpdgctrl0 = 0x431A032F,
|
|
.p1_mpdgctrl1 = 0x03200263,
|
|
.p0_mprddlctl = 0x4B434748,
|
|
.p1_mprddlctl = 0x4445404C,
|
|
.p0_mpwrdlctl = 0x38444542,
|
|
.p1_mpwrdlctl = 0x4935493A,
|
|
};
|
|
|
|
/* MT41K256M16 (4Gb density) */
|
|
static const struct mx6_ddr3_cfg mt41k256m16 = {
|
|
.mem_speed = 1600,
|
|
.density = 4,
|
|
.width = 16,
|
|
.banks = 8,
|
|
.rowaddr = 15,
|
|
.coladdr = 10,
|
|
.pagesz = 2,
|
|
.trcd = 1375,
|
|
.trcmin = 4875,
|
|
.trasmin = 3500,
|
|
};
|
|
|
|
#ifdef CONFIG_MX6_DDRCAL
|
|
static void spl_dram_print_cal(struct mx6_ddr_sysinfo const *sysinfo)
|
|
{
|
|
struct mx6_mmdc_calibration calibration = {0};
|
|
|
|
mmdc_read_calibration(sysinfo, &calibration);
|
|
|
|
debug(".p0_mpdgctrl0\t= 0x%08X\n", calibration.p0_mpdgctrl0);
|
|
debug(".p0_mpdgctrl1\t= 0x%08X\n", calibration.p0_mpdgctrl1);
|
|
debug(".p0_mprddlctl\t= 0x%08X\n", calibration.p0_mprddlctl);
|
|
debug(".p0_mpwrdlctl\t= 0x%08X\n", calibration.p0_mpwrdlctl);
|
|
debug(".p0_mpwldectrl0\t= 0x%08X\n", calibration.p0_mpwldectrl0);
|
|
debug(".p0_mpwldectrl1\t= 0x%08X\n", calibration.p0_mpwldectrl1);
|
|
debug(".p1_mpdgctrl0\t= 0x%08X\n", calibration.p1_mpdgctrl0);
|
|
debug(".p1_mpdgctrl1\t= 0x%08X\n", calibration.p1_mpdgctrl1);
|
|
debug(".p1_mprddlctl\t= 0x%08X\n", calibration.p1_mprddlctl);
|
|
debug(".p1_mpwrdlctl\t= 0x%08X\n", calibration.p1_mpwrdlctl);
|
|
debug(".p1_mpwldectrl0\t= 0x%08X\n", calibration.p1_mpwldectrl0);
|
|
debug(".p1_mpwldectrl1\t= 0x%08X\n", calibration.p1_mpwldectrl1);
|
|
}
|
|
|
|
static void spl_dram_perform_cal(struct mx6_ddr_sysinfo const *sysinfo)
|
|
{
|
|
int ret;
|
|
|
|
/* Perform DDR DRAM calibration */
|
|
udelay(100);
|
|
ret = mmdc_do_write_level_calibration(sysinfo);
|
|
if (ret) {
|
|
printf("DDR: Write level calibration error [%d]\n", ret);
|
|
return;
|
|
}
|
|
|
|
ret = mmdc_do_dqs_calibration(sysinfo);
|
|
if (ret) {
|
|
printf("DDR: DQS calibration error [%d]\n", ret);
|
|
return;
|
|
}
|
|
|
|
spl_dram_print_cal(sysinfo);
|
|
}
|
|
#endif /* CONFIG_MX6_DDRCAL */
|
|
|
|
static void spl_dram_init(void)
|
|
{
|
|
struct mx6_ddr_sysinfo sysinfo = {
|
|
/* width of data bus:0=16,1=32,2=64 */
|
|
.dsize = 2,
|
|
/* config for full 4GB range so that get_mem_size() works */
|
|
.cs_density = 32, /* 32Gb per CS */
|
|
/* single chip select */
|
|
.ncs = 1,
|
|
.cs1_mirror = 0,
|
|
.rtt_wr = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Wr = RZQ/4 */
|
|
.rtt_nom = 2 /*DDR3_RTT_120_OHM*/, /* RTT_Nom = RZQ/2 */
|
|
.walat = 1, /* Write additional latency */
|
|
.ralat = 5, /* Read additional latency */
|
|
.mif3_mode = 3, /* Command prediction working mode */
|
|
.bi_on = 1, /* Bank interleaving enabled */
|
|
.sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
|
|
.rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
|
|
.pd_fast_exit = 1, /* enable precharge power-down fast exit */
|
|
.ddr_type = DDR_TYPE_DDR3,
|
|
.refsel = 1, /* Refresh cycles at 32KHz */
|
|
.refr = 7, /* 8 refresh commands per refresh cycle */
|
|
};
|
|
|
|
mx6dq_dram_iocfg(64, &mx6_ddr_ioregs, &mx6_grp_ioregs);
|
|
mx6_dram_cfg(&sysinfo, &mx6_4x256mx16_mmdc_calib, &mt41k256m16);
|
|
|
|
#ifdef CONFIG_MX6_DDRCAL
|
|
spl_dram_perform_cal(&sysinfo);
|
|
#endif
|
|
}
|
|
|
|
void board_boot_order(u32 *spl_boot_list)
|
|
{
|
|
u32 boot_device = spl_boot_device();
|
|
u32 reg = imx6_src_get_boot_mode();
|
|
|
|
reg = (reg & IMX6_BMODE_MASK) >> IMX6_BMODE_SHIFT;
|
|
|
|
debug("%s: boot device: 0x%x (0x4 SD, 0x6 eMMC)\n", __func__, reg);
|
|
if (boot_device == BOOT_DEVICE_MMC1)
|
|
if (reg == IMX6_BMODE_MMC || reg == IMX6_BMODE_EMMC)
|
|
boot_device = BOOT_DEVICE_MMC2;
|
|
|
|
spl_boot_list[0] = boot_device;
|
|
/*
|
|
* Below boot device is a 'fallback' - it shall always be possible to
|
|
* boot from SD card
|
|
*/
|
|
spl_boot_list[1] = BOOT_DEVICE_MMC1;
|
|
}
|
|
|
|
void board_init_f(ulong dummy)
|
|
{
|
|
/* setup AIPS and disable watchdog */
|
|
arch_cpu_init();
|
|
|
|
ccgr_init();
|
|
gpr_init();
|
|
|
|
/* setup GP timer */
|
|
timer_init();
|
|
|
|
/* Early - pre reloc - driver model setup */
|
|
spl_early_init();
|
|
|
|
/* UART clocks enabled and gd valid - init serial console */
|
|
preloader_console_init();
|
|
|
|
/* DDR initialization */
|
|
spl_dram_init();
|
|
|
|
/* Clear the BSS. */
|
|
memset(__bss_start, 0, __bss_end - __bss_start);
|
|
}
|