Alexander Holler d90859a67c omap3_beagle: enable EHCI and USB storage. ... The reset sequence/configuration for ehci is highly board specific, so this will be done in the source for the board, instead of introducing several CONFIG_* which would be needed to make those few lines in beagle.c usable across different OMAP boards. Signed-off-by: Alexander Holler <holler@ahsoftware.de> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>		2011-04-27 19:38:09 +02:00
..
manroland
a4m072.h
a320evb.h	arm: a320: use new ftpmu010 API	2011-04-27 19:38:07 +02:00
A3000.h
acadia.h
actux1.h
actux2.h
actux3.h
actux4.h
ADCIOP.h
Adder.h
AdderUSB.h
ADS860.h
aev.h
afeb9260.h
Alaska8220.h
alpr.h
am3517_crane.h	ARMV7: AM3517/05: Add support for CraneBoard.	2011-04-27 19:38:06 +02:00
am3517_evm.h
amcc-common.h
AMX860.h
ap325rxa.h	sh: Remove config.mk for ap325rxa board	2011-02-02 16:18:44 +09:00
AP1000.h
APC405.h
apollon.h
AR405.h
aria.h
armadillo.h
ASH405.h
aspenite.h	I2C: add i2c support for Armada100 platform	2011-04-27 19:38:08 +02:00
assabet.h
astro_mcf5373l.h
at91cap9adk.h
at91rm9200dk.h
at91rm9200ek.h
at91sam9m10g45ek.h
at91sam9rlek.h
at91sam9260ek.h
at91sam9261ek.h
at91sam9263ek.h
atc.h
atngw100.h
atstk1002.h
atstk1003.h
atstk1004.h
atstk1006.h
B2.h
BAB7xx.h
balloon3.h
bamboo.h
BC3450.h
bct-brettl2.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf506f-ezkit.h	Blackfin: adi boards: enable CONFIG_MONITOR_IS_IN_RAM	2011-04-08 00:44:27 -04:00
bf518f-ezbrd.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf525-ucr2.h	Blackfin: bf525-ucr2: new board port	2011-04-08 00:44:26 -04:00
bf526-ezbrd.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf527-ad7160-eval.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf527-ezkit.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf527-sdp.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf533-ezkit.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf533-stamp.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf537-minotaur.h	Blackfin: bf537-minotaur/bf537-srv1: undefine nfs when net is disabled	2011-04-08 00:44:26 -04:00
bf537-pnav.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf537-srv1.h	Blackfin: bf537-minotaur/bf537-srv1: undefine nfs when net is disabled	2011-04-08 00:44:26 -04:00
bf537-stamp.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf538f-ezkit.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf548-ezkit.h	Blackfin: bf548-ezkit: move env sector	2011-04-08 00:44:27 -04:00
bf561-acvilon.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bf561-ezkit.h	Blackfin: bf561-ezkit/ibf-dsp561: invert env offset/addr logic	2011-04-08 00:44:26 -04:00
bfin_adi_common.h	Blackfin: adi boards: enable CONFIG_MONITOR_IS_IN_RAM	2011-04-08 00:44:27 -04:00
blackstamp.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
blackvme.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
bluestone.h
BMW.h
bubinga.h
c2mon.h
ca9x4_ct_vxp.h	ARMV7: Vexpress: Remove config.mk	2011-04-27 19:38:07 +02:00
CANBT.h
canmb.h
canyonlands.h
CATcenter.h
cerf250.h
charon.h	mpc52xx, charon: change mtd default partitions	2010-12-17 20:15:12 +01:00
cm41xx.h
cm4008.h
cm5200.h
cm_t35.h	OMAP3: CM-T35: Add support for CM-T3730	2011-04-27 19:38:07 +02:00
cm-bf527.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
cm-bf533.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
cm-bf537e.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
cm-bf537u.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
cm-bf548.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
cm-bf561.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
cmc_pu2.h
cmi_mpc5xx.h
CMS700.h
cobra5272.h
cogent_common.h
cogent_mpc8xx.h
cogent_mpc8260.h
colibri_pxa270.h
corenet_ds.h	powerpc/85xx: Add PBL boot from SPI flash support on P4080DS	2011-04-10 11:17:55 -05:00
CPC45.h
cpci5200.h
CPCI2DP.h
CPCI405.h
CPCI405AB.h
CPCI405DT.h
CPCI750.h
CPCI4052.h
CPCIISER4.h
cpu9260.h
CPU86.h
CPU87.h
cpuat91.h
cradle.h
CRAYL1.h
csb226.h
csb272.h
csb472.h
csb637.h
CU824.h
da830evm.h
da850evm.h
DASA_SIM.h
davinci_dm355evm.h	DaVinci DM355: Adding MMC/SD support for DM355 EVM	2011-02-02 00:54:44 +01:00
davinci_dm355leopard.h
davinci_dm365evm.h	DaVinci DM365: Adding MMC/SD support for DM365 EVM	2011-02-02 00:54:44 +01:00
davinci_dm6467evm.h	DaVinci DM6467: Enhance board Support	2011-02-02 00:54:44 +01:00
davinci_dvevm.h	DaVinci DM6446: Config Update	2010-12-11 10:47:30 -05:00
davinci_schmoogie.h	DaVinci Schmoogie: Add ARM Relocation Support	2010-12-17 10:07:40 +01:00
davinci_sffsdr.h	DaVinci sffsdr: Add ARM Relocation Support	2010-12-17 10:07:35 +01:00
davinci_sonata.h	DaVinci Sonata: Fix Build Error	2011-02-02 00:54:44 +01:00
DB64360.h
DB64460.h
dbau1x00.h
debris.h
devkit8000.h
digsy_mtc.h	mpc52xx, digsy_mtc: add trickle charger support for rev5 boards.	2011-04-26 00:25:05 +02:00
dkb.h	I2C: add i2c support for Pantheon platform	2011-04-27 19:38:08 +02:00
dlvision-10g.h	ppc4xx: Do not stop booting on any keypress on dlvision-10g	2011-04-21 10:35:04 +02:00
dlvision.h
dnp1110.h
dnp5370.h	Blackfin: dnp5370: new board port	2011-04-08 00:44:26 -04:00
dockstar.h
DP405.h
DU405.h
DU440.h
ea20.h
eb_cpux9k2.h
EB+MCF-EV123.h
ebony.h
edb93xx.h
edminiv2.h	Replace obsolete e-mail address	2011-04-27 19:38:09 +02:00
efikamx.h	iMX5: EfikaMX: Preliminary board support	2011-02-02 00:54:42 +01:00
ELPPC.h
ELPT860.h
eNET.h	x86: Rename i386 to x86	2011-04-13 19:43:28 +10:00
ep82xxm.h
ep7312.h
ep8248.h
ep8260.h
EP88x.h
espt.h	sh: Remove config.mk for espt board	2011-02-02 16:18:45 +09:00
ESTEEM192E.h
ETX094.h
evb4510.h
EVB64260.h
eXalion.h
EXBITGEN.h
FADS823.h
FADS850SAR.h
FADS860T.h
favr-32-ezkit.h
FLAGADM.h
FPS850L.h
FPS860L.h
fx12mm.h
G2000.h
galaxy5200.h
gcplus.h
gdppc440etx.h
GEN860T.h
GENIETV.h
gr_cpci_ax2000.h
gr_ep2s60.h
gr_xc3s_1500.h
grsim_leon2.h
grsim.h
gth2.h
guruplug.h
gw8260.h
h2_p2_dbg_board.h
hammerhead.h
harmony.h	arm: Tegra2: Add support for NVIDIA Harmony board	2011-02-21 08:30:55 +01:00
hawkboard.h
hcu4.h
hcu5.h
hermes.h
HH405.h
HIDDEN_DRAGON.h
hmi1001.h
HUB405.h
hymod.h
IAD210.h
ibf-dsp561.h	Blackfin: bf561-ezkit/ibf-dsp561: invert env offset/addr logic	2011-04-08 00:44:26 -04:00
IceCube.h
icon.h
ICU862.h
idmr.h
IDS8247.h
igep0020.h	ARM: OMAP3: Revamp IGEP v2 default	2011-04-27 19:38:09 +02:00
igep0030.h	ARM: OMAP3: Revamp IGEP module default configuration	2011-04-27 19:38:09 +02:00
impa7.h
imx27lite-common.h
imx27lite.h
imx31_litekit.h	IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers	2011-04-27 19:38:05 +02:00
imx31_phycore.h
incaip.h	MIPS: Move Inca-IP targets to boards.cfg	2011-02-05 22:45:41 +09:00
inka4x0.h
innokom.h	mv_i2c: use structure to replace the direclty define	2011-04-27 19:38:08 +02:00
integratorap.h
integratorcp.h
intip.h
io.h	ppc4xx: Add DLVision-10G board support	2011-02-07 11:13:16 +01:00
iocon.h	ppc4xx: Add DLVision-10G board support	2011-02-07 11:13:16 +01:00
ip04.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
IP860.h
ipek01.h
IPHASE4539.h
ISPAN.h
IVML24.h
IVMS8.h
ixdp425.h
ixdpg425.h
jadecpu.h
jornada.h
JSE.h
jupiter.h
KAREF.h
katmai.h
kb9202.h
keymile-common.h
kilauea.h
km_arm.h
kmeter1.h	fsl: Change fsl_phy_enet_if to phy_interface_t	2011-04-20 15:09:35 -05:00
korat.h
KUP4K.h
KUP4X.h
kvme080.h
LANTEC.h
lart.h
linkstation.h
lpc2292sodimm.h
lpd7a400-10.h
lpd7a400.h
lpd7a404-10.h
lpd7a404.h
luan.h
lubbock.h
lwmon5.h	ppc4xx: Remove PCI support from lwmon5	2011-01-10 12:50:14 +01:00
lwmon.h
m501sk.h
M5208EVBE.h
M5235EVB.h
M5249EVB.h
M5253DEMO.h
M5253EVBE.h
M5271EVB.h
M5272C3.h
M5275EVB.h
M5282EVB.h
M5329EVB.h
M5373EVB.h
M5475EVB.h
M5485EVB.h
M52277EVB.h
M53017EVB.h
M54451EVB.h
M54455EVB.h
magnesium.h
makalu.h
MBX860T.h
MBX.h
mcc200.h
mcu25.h
mecp5123.h
mecp5200.h
meesc.h
METROBOX.h
mgcoge.h	ppc, mgcoge: add DIP switch detection	2011-04-11 22:41:37 +02:00
MHPC.h
microblaze-generic.h	microblaze: Fix bd_info pointer	2011-01-10 08:52:32 +01:00
MigoR.h	sh: Remove config.mk for MigoR board	2011-02-02 16:18:44 +09:00
mimc200.h
MIP405.h
ml507.h
ML2.h
modnet50.h
motionpro.h
MOUSSE.h
mpc5121-common.h
mpc5121ads.h	powerpc: clean up DIU macro definitions for Freescale reference boards	2011-04-04 22:32:18 -05:00
mpc7448hpc2.h
mpc8308_p1m.h
MPC86xADS.h
MPC832XEMDS.h	fsl: Change fsl_phy_enet_if to phy_interface_t	2011-04-20 15:09:35 -05:00
MPC837XEMDS.h	fsl_esdhc: Fix esdhc disabled problem on some platforms	2011-01-14 01:32:19 -06:00
MPC837XERDB.h	fsl_esdhc: Fix esdhc disabled problem on some platforms	2011-01-14 01:32:19 -06:00
MPC885ADS.h
MPC8260ADS.h
MPC8266ADS.h
MPC8308RDB.h
MPC8313ERDB.h
MPC8315ERDB.h
MPC8323ERDB.h	fsl: Change fsl_phy_enet_if to phy_interface_t	2011-04-20 15:09:35 -05:00
MPC8349EMDS.h
MPC8349ITX.h
MPC8360EMDS.h	fsl: Change fsl_phy_enet_if to phy_interface_t	2011-04-20 15:09:35 -05:00
MPC8360ERDK.h	fsl: Change fsl_phy_enet_if to phy_interface_t	2011-04-20 15:09:35 -05:00
MPC8536DS.h	powerpc/85xx: rename NAND prefixes to CONFIG_SYS	2011-04-08 02:50:57 -05:00
MPC8540ADS.h	powerpc/85xx: Bump up the CONFIG_SYS_BOOTM_LEN to 16M on FSL 85xx boards	2011-01-14 01:32:22 -06:00
MPC8541CDS.h	powerpc/85xx: Bump up the CONFIG_SYS_BOOTM_LEN to 16M on FSL 85xx boards	2011-01-14 01:32:22 -06:00
MPC8544DS.h	powerpc/85xx: Bump up the CONFIG_SYS_BOOTM_LEN to 16M on FSL 85xx boards	2011-01-14 01:32:22 -06:00
MPC8548CDS.h	powerpc/85xx: Bump up the CONFIG_SYS_BOOTM_LEN to 16M on FSL 85xx boards	2011-01-14 01:32:22 -06:00
MPC8555CDS.h	powerpc/85xx: Bump up the CONFIG_SYS_BOOTM_LEN to 16M on FSL 85xx boards	2011-01-14 01:32:22 -06:00
MPC8560ADS.h	powerpc/85xx: Bump up the CONFIG_SYS_BOOTM_LEN to 16M on FSL 85xx boards	2011-01-14 01:32:22 -06:00
MPC8568MDS.h	fsl: Change fsl_phy_enet_if to phy_interface_t	2011-04-20 15:09:35 -05:00
MPC8569MDS.h	fsl: Change fsl_phy_enet_if to phy_interface_t	2011-04-20 15:09:35 -05:00
MPC8572DS.h	powerpc/85xx: rename NAND prefixes to CONFIG_SYS	2011-04-08 02:50:57 -05:00
MPC8610HPCD.h	powerpc: clean up DIU macro definitions for Freescale reference boards	2011-04-04 22:32:18 -05:00
MPC8641HPCN.h	powerpc/86xx: Convert MPC8641HPCN to use common SRIO init code	2011-01-14 01:32:21 -06:00
mpq101.h	mpq101: initial support for Mercury Computer Systems MPQ101 board	2011-01-26 23:44:00 -06:00
mpr2.h	sh: Remove config.mk for mpr2 board	2011-02-02 16:18:45 +09:00
ms7720se.h	sh: Remove config.mk for ms7720se board	2011-02-02 16:18:45 +09:00
ms7722se.h	sh: Remove config.mk for ms7722se board	2011-02-02 16:18:45 +09:00
ms7750se.h	sh: Remove config.mk for ms7750se board	2011-02-02 16:18:45 +09:00
muas3001.h
mucmc52.h
munices.h
MUSENKI.h
mv88f6281gtw_ge.h
mv-common.h	mv: seperate kirkwood and armada from common setting	2011-02-21 08:30:55 +01:00
MVBC_P.h
MVBLM7.h
MVBLUE.h
MVS1.h
MVSMR.h
mx1ads.h
mx1fs2.h
mx31ads.h	IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers	2011-04-27 19:38:05 +02:00
mx31pdk.h	IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers	2011-04-27 19:38:05 +02:00
mx35pdk.h	Add support for Freescale's mx35pdk board.	2011-02-02 00:54:43 +01:00
mx51evk.h	MX5: Enable flat-device-tree support on mx51/53 evk board	2011-04-27 19:38:05 +02:00
mx53evk.h	MX5: Enable flat-device-tree support on mx51/53 evk board	2011-04-27 19:38:05 +02:00
neo.h
NETPHONE.h
netstal-common.h
netstar.h
NETTA2.h
NETTA.h
NETVIA.h
nhk8815.h
nios2-generic.h
ns9750dev.h
NSCU.h
NX823.h
o2dnt.h
ocotea.h
OCRTC.h
omap3_beagle.h	omap3_beagle: enable EHCI and USB storage.	2011-04-27 19:38:09 +02:00
omap3_evm.h
omap3_overo.h
omap3_pandora.h
omap3_sdp3430.h
omap3_zoom1.h
omap3_zoom2.h
omap4_panda.h
omap4_sdp4430.h	Merge branch 'master' of ../master into next	2010-12-16 23:00:53 +01:00
omap730.h
omap730p2.h
omap1510.h
omap1510inn.h
omap1610h2.h
omap1610inn.h
omap2420h4.h	Make STANDALONE_LOAD_ADDR configurable per board	2011-04-12 22:58:32 +02:00
omap5912osk.h
openrd_base.h
ORSG.h
otc570.h
OXC.h
p3mx.h
p3p440.h
P1_P2_RDB.h	powerpc/85xx: rename NAND prefixes to CONFIG_SYS	2011-04-08 02:50:57 -05:00
P3G4.h
P1022DS.h	powerpc/85xx: Update default hwconfig on P1022DS	2011-04-10 11:17:55 -05:00
P2020DS.h	powerpc/85xx: rename NAND prefixes to CONFIG_SYS	2011-04-08 02:50:57 -05:00
P4080DS.h	powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers	2011-01-19 22:58:23 -06:00
palmld.h
palmtc.h
PATI.h
pb1x00.h
PCI405.h
PCI5441.h
PCIPPC2.h
PCIPPC6.h
pcm030.h
pcs440ep.h
pdm360ng.h
pdnb3.h
pf5200.h
PIP405.h
PK1C20.h
pleb2.h
PLU405.h
pm9g45.h	pm9g45: enable cache command	2010-12-16 22:45:00 +01:00
pm9261.h	pm9261: enable cache command	2010-12-16 22:46:06 +01:00
pm9263.h	pm9263: enable cache command	2010-12-16 22:45:30 +01:00
PM520.h
PM826.h
PM828.h
PMC405.h
PMC405DE.h
PMC440.h
PN62.h
PPChameleonEVB.h
ppmc7xx.h
ppmc8260.h
pxa255_idp.h
qemu-mips.h
qong.h	IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers	2011-04-27 19:38:05 +02:00
QS823.h
QS850.h
QS860T.h
quad100hd.h
quantum.h
r2dplus.h	sh: Remove config.mk for r2dplus board	2011-02-02 16:18:44 +09:00
r7780mp.h	sh: Remove config.mk for r7780mp board	2011-02-02 16:18:44 +09:00
R360MPI.h
Rattler.h
RBC823.h
rd6281a.h
redwood.h
rmu.h
RPXClassic.h
RPXlite_DW.h
RPXlite.h
RPXsuper.h
RRvision.h
rsdproto.h
rsk7203.h	sh: Remove config.mk for rsk7203 board	2011-02-02 16:18:44 +09:00
s5p_goni.h	S5P: goni: Enable the pwm driver	2011-03-27 19:20:06 +02:00
s5pc210_universal.h	S5P: universal: Enable the pwm driver	2011-03-27 19:20:08 +02:00
sacsng.h
Sandpoint8240.h
Sandpoint8245.h
sbc35_a9g20.h
sbc405.h
sbc2410x.h
sbc8240.h
sbc8260.h
sbc8349.h
sbc8548.h
sbc8560.h	85xx boards: Rename CONFIG_DDR_DLL to CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN	2011-01-14 01:32:19 -06:00
sbc8641d.h	powerpc/86xx: Convert SBC8641 to use common SRIO init code	2011-01-14 01:32:21 -06:00
SBC8540.h	85xx boards: Rename CONFIG_DDR_DLL to CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN	2011-01-14 01:32:19 -06:00
sc3.h
scb9328.h
SCM.h
seaboard.h	arm: Tegra2: Change mach-type to MACH_TYPE_SEABOARD due to mach-types.h update	2011-03-27 19:20:30 +02:00
sequoia.h
sh7757lcr.h	sh: add support for sh7757lcr board	2011-02-02 16:38:41 +09:00
sh7763rdp.h	sh: Remove config.mk for sh7763rdp board	2011-02-02 16:18:44 +09:00
sh7785lcr.h	sh: Remove config.mk for sh7785lcr board	2011-02-02 16:18:45 +09:00
shannon.h
sheevaplug.h
shmin.h	Merge branch 'master' of git://git.denx.de/u-boot-sh	2011-02-04 20:38:27 +01:00
SIMPC8313.h
SM850.h
smdk2400.h
smdk2410.h
smdk6400.h	SMDK6400: Fix CONFIG_SYS_INIT_SP_ADDR undefined	2011-03-27 19:19:00 +02:00
smdkc100.h	S5P: smdkc100: Enable the pwm driver	2011-03-27 19:20:03 +02:00
SMN42.h
socrates.h
sorcery.h
spc1920.h
SPD823TS.h
spear3xx.h
spear6xx.h
spear-common.h
spieval.h
stxgp3.h	85xx boards: Rename CONFIG_DDR_DLL to CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN	2011-01-14 01:32:19 -06:00
stxssa.h	85xx boards: Rename CONFIG_DDR_DLL to CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN	2011-01-14 01:32:19 -06:00
stxxtc.h
suen3.h
svm_sc8xx.h
SX1.h
SXNI855T.h
t3corp.h	ppc4xx: t3corp: Add support for the Xilinx DS617 flash chip	2010-12-17 09:43:23 +01:00
taihu.h
taishan.h
TASREG.h
tb0229.h
TB5200.h
tcm-bf518.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
tcm-bf537.h	Blackfin: move CONFIG_BFIN_CPU back to board config.h	2011-04-08 00:44:26 -04:00
tegra2-common.h	arm: Tegra2: Add support for NVIDIA Harmony board	2011-02-21 08:30:55 +01:00
TK885D.h
tnetv107x_evm.h
tny_a9260.h
top9000.h	Merge branch 'master' of git://git.denx.de/u-boot-arm	2010-12-17 20:02:05 +01:00
TOP860.h
TOP5200.h
Total5200.h
TQM85xx.h	85xx boards: Rename CONFIG_DDR_DLL to CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN	2011-01-14 01:32:19 -06:00
TQM823L.h
TQM823M.h
TQM834x.h
TQM850L.h
TQM850M.h
TQM855L.h
TQM855M.h
TQM860L.h
TQM860M.h
TQM862L.h
TQM862M.h
TQM866M.h
TQM885D.h
TQM5200.h	mpc52xx, charon: change mtd default partitions	2010-12-17 20:15:12 +01:00
TQM8260.h
TQM8272.h
trab.h
trizepsiv.h
tx25.h
uc100.h
uc101.h
utx8245.h
v5fx30teval.h
v37.h
v38b.h
VCMA9.h
vct.h	MIPS: VCT: Fix enabling of unwanted options if networking or USB support are disabled	2011-02-05 17:15:05 +09:00
ve8313.h
versatile.h
virtlab2.h
vision2.h	MX5: Add initial support for MX53 processor	2011-02-02 00:54:41 +01:00
vme8349.h
VOH405.h
voiceblue.h
VOM405.h
VoVPN-GW.h
vpac270.h
W7OLMC.h
W7OLMG.h
walnut.h
WUH405.h
xaeniax.h
xilinx-ppc405-generic.h
xilinx-ppc405.h
xilinx-ppc440-generic.h
xilinx-ppc440.h
xilinx-ppc.h	xilinx-ppc4xx-generic: Use common u-boot.lds	2010-12-17 09:44:40 +01:00
xm250.h	mv_i2c: use structure to replace the direclty define	2011-04-27 19:38:08 +02:00
xpedite517x.h
xpedite520x.h
xpedite537x.h	tsec: Revert to setting TBICR_ANEG_ENABLE by default for SGMII	2010-12-13 09:32:15 -06:00
xpedite550x.h	powerpc/8xxx: Refactor fsl_ddr_get_spd into common code from board	2011-04-04 09:24:41 -05:00
xpedite1000.h
yosemite.h
yucca.h
Yukon8220.h
zeus.h
zipitz2.h
ZPC1900.h
ZUMA.h
zylonite.h