mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-07-05 18:56:15 +09:00
f56348af5d
The purpose of this patch is to prepare for adding the OMAP4 architecture, which is Cortex A9 Cortex A8 and A9 both belong to the armv7 architecture, hence the name change. The two architectures are similar enough that substantial code can be shared. Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
371 lines
11 KiB
C
371 lines
11 KiB
C
/*
|
|
* (C) Copyright 2006-2008
|
|
* Texas Instruments.
|
|
* Author :
|
|
* Manikandan Pillai <mani.pillai@ti.com>
|
|
* Derived from Beagle Board and 3430 SDP code by
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
* Syed Mohammed Khasim <khasim@ti.com>
|
|
*
|
|
* Manikandan Pillai <mani.pillai@ti.com>
|
|
*
|
|
* Configuration settings for the TI OMAP3 EVM board.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
*/
|
|
#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
|
|
#define CONFIG_OMAP 1 /* in a TI OMAP core */
|
|
#define CONFIG_OMAP34XX 1 /* which is a 34XX */
|
|
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
|
|
#define CONFIG_OMAP3_EVM 1 /* working with EVM */
|
|
|
|
#define CONFIG_SDRC /* The chip has SDRC controller */
|
|
|
|
#include <asm/arch/cpu.h> /* get chip and board defs */
|
|
#include <asm/arch/omap3.h>
|
|
|
|
/*
|
|
* Display CPU and Board information
|
|
*/
|
|
#define CONFIG_DISPLAY_CPUINFO 1
|
|
#define CONFIG_DISPLAY_BOARDINFO 1
|
|
|
|
/* Clock Defines */
|
|
#define V_OSCK 26000000 /* Clock output from T2 */
|
|
#define V_SCLK (V_OSCK >> 1)
|
|
|
|
#undef CONFIG_USE_IRQ /* no support for IRQs */
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
#define CONFIG_REVISION_TAG 1
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
|
|
/* Sector */
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
|
|
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */
|
|
/* initial data */
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
|
|
/*
|
|
* NS16550 Configuration
|
|
*/
|
|
#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
|
|
|
|
#define CONFIG_SYS_NS16550
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
|
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
|
|
|
|
/*
|
|
* select serial console configuration
|
|
*/
|
|
#define CONFIG_CONS_INDEX 1
|
|
#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
|
|
#define CONFIG_SERIAL1 1 /* UART1 on OMAP3 EVM */
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
|
|
115200}
|
|
#define CONFIG_MMC 1
|
|
#define CONFIG_OMAP3_MMC 1
|
|
#define CONFIG_DOS_PARTITION 1
|
|
|
|
/* DDR - I use Micron DDR */
|
|
#define CONFIG_OMAP3_MICRON_DDR 1
|
|
|
|
/* USB
|
|
* Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard
|
|
* Enable CONFIG_MUSB_UDD for Device functionalities.
|
|
*/
|
|
#define CONFIG_USB_OMAP3 1
|
|
#define CONFIG_MUSB_HCD 1
|
|
/* #define CONFIG_MUSB_UDC 1 */
|
|
|
|
#ifdef CONFIG_USB_OMAP3
|
|
|
|
#ifdef CONFIG_MUSB_HCD
|
|
#define CONFIG_CMD_USB
|
|
|
|
#define CONFIG_USB_STORAGE
|
|
#define CONGIG_CMD_STORAGE
|
|
#define CONFIG_CMD_FAT
|
|
|
|
#ifdef CONFIG_USB_KEYBOARD
|
|
#define CONFIG_SYS_USB_EVENT_POLL
|
|
#define CONFIG_PREBOOT "usb start"
|
|
#endif /* CONFIG_USB_KEYBOARD */
|
|
|
|
#endif /* CONFIG_MUSB_HCD */
|
|
|
|
#ifdef CONFIG_MUSB_UDC
|
|
/* USB device configuration */
|
|
#define CONFIG_USB_DEVICE 1
|
|
#define CONFIG_USB_TTY 1
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
|
|
/* Change these to suit your needs */
|
|
#define CONFIG_USBD_VENDORID 0x0451
|
|
#define CONFIG_USBD_PRODUCTID 0x5678
|
|
#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
|
|
#define CONFIG_USBD_PRODUCT_NAME "EVM"
|
|
#endif /* CONFIG_MUSB_UDC */
|
|
|
|
#endif /* CONFIG_USB_OMAP3 */
|
|
|
|
/* commands to include */
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_EXT2 /* EXT2 Support */
|
|
#define CONFIG_CMD_FAT /* FAT support */
|
|
#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
|
|
|
|
#define CONFIG_CMD_I2C /* I2C serial bus support */
|
|
#define CONFIG_CMD_MMC /* MMC support */
|
|
#define CONFIG_CMD_NAND /* NAND support */
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_PING
|
|
|
|
#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
|
|
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
|
|
#undef CONFIG_CMD_IMI /* iminfo */
|
|
#undef CONFIG_CMD_IMLS /* List all found images */
|
|
|
|
#define CONFIG_SYS_NO_FLASH
|
|
#define CONFIG_HARD_I2C 1
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
#define CONFIG_SYS_I2C_SLAVE 1
|
|
#define CONFIG_SYS_I2C_BUS 0
|
|
#define CONFIG_SYS_I2C_BUS_SELECT 1
|
|
#define CONFIG_DRIVER_OMAP34XX_I2C 1
|
|
|
|
/*
|
|
* TWL4030
|
|
*/
|
|
#define CONFIG_TWL4030_POWER 1
|
|
|
|
/*
|
|
* Board NAND Info.
|
|
*/
|
|
#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
|
|
/* to access nand */
|
|
#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
|
|
/* to access */
|
|
/* nand at CS0 */
|
|
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
|
|
/* NAND devices */
|
|
#define CONFIG_JFFS2_NAND
|
|
/* nand device jffs2 lives on */
|
|
#define CONFIG_JFFS2_DEV "nand0"
|
|
/* start of jffs2 partition */
|
|
#define CONFIG_JFFS2_PART_OFFSET 0x680000
|
|
#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */
|
|
|
|
/* Environment information */
|
|
#define CONFIG_BOOTDELAY 10
|
|
|
|
#define CONFIG_BOOTFILE uImage
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"loadaddr=0x82000000\0" \
|
|
"usbtty=cdc_acm\0" \
|
|
"console=ttyS2,115200n8\0" \
|
|
"mmcargs=setenv bootargs console=${console} " \
|
|
"root=/dev/mmcblk0p2 rw " \
|
|
"rootfstype=ext3 rootwait\0" \
|
|
"nandargs=setenv bootargs console=${console} " \
|
|
"root=/dev/mtdblock4 rw " \
|
|
"rootfstype=jffs2\0" \
|
|
"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
|
|
"bootscript=echo Running bootscript from mmc ...; " \
|
|
"source ${loadaddr}\0" \
|
|
"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
|
|
"mmcboot=echo Booting from mmc ...; " \
|
|
"run mmcargs; " \
|
|
"bootm ${loadaddr}\0" \
|
|
"nandboot=echo Booting from nand ...; " \
|
|
"run nandargs; " \
|
|
"onenand read ${loadaddr} 280000 400000; " \
|
|
"bootm ${loadaddr}\0" \
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"if mmc init; then " \
|
|
"if run loadbootscript; then " \
|
|
"run bootscript; " \
|
|
"else " \
|
|
"if run loaduimage; then " \
|
|
"run mmcboot; " \
|
|
"else run nandboot; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"else run nandboot; fi"
|
|
|
|
#define CONFIG_AUTO_COMPLETE 1
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
|
|
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
|
#define CONFIG_SYS_PROMPT "OMAP3_EVM # "
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
/* Print Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
|
sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command */
|
|
/* args */
|
|
/* Boot Argument Buffer Size */
|
|
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
|
|
/* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
|
|
#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
|
|
0x01F00000) /* 31MB */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
|
|
/* address */
|
|
|
|
/*
|
|
* OMAP3 has 12 GP timers, they can be driven by the system clock
|
|
* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
|
|
* This rate is divided by a local divisor.
|
|
*/
|
|
#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
|
|
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Stack sizes
|
|
*
|
|
* The stack sizes are set up in start.S using the settings below
|
|
*/
|
|
#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
|
|
#ifdef CONFIG_USE_IRQ
|
|
#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
|
|
#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Physical Memory Map
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
|
|
#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
|
|
#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */
|
|
#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
|
|
|
|
/* SDRAM Bank Allocation method */
|
|
#define SDRC_R_B_C 1
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH and environment organization
|
|
*/
|
|
|
|
/* **** PISMO SUPPORT *** */
|
|
|
|
/* Configure the PISMO */
|
|
#define PISMO1_NAND_SIZE GPMC_SIZE_128M
|
|
#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */
|
|
/* on one chip */
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
|
|
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
|
|
|
|
#define CONFIG_SYS_FLASH_BASE boot_flash_base
|
|
|
|
/* Monitor at start of flash */
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
|
|
|
|
#if defined(CONFIG_CMD_NAND)
|
|
#define CONFIG_NAND_OMAP_GPMC
|
|
#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
|
|
#define CONFIG_ENV_IS_IN_NAND
|
|
#elif defined(CONFIG_CMD_ONENAND)
|
|
#define CONFIG_ENV_IS_IN_ONENAND 1
|
|
#endif
|
|
#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */
|
|
#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
|
|
|
|
#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec
|
|
#define CONFIG_ENV_OFFSET boot_flash_off
|
|
#define CONFIG_ENV_ADDR boot_flash_env_addr
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* CFI FLASH driver setup
|
|
*/
|
|
/* timeout values are in ticks */
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
|
|
|
|
/* Flash banks JFFS2 should use */
|
|
#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
|
|
CONFIG_SYS_MAX_NAND_DEVICE)
|
|
#define CONFIG_SYS_JFFS2_MEM_NAND
|
|
/* use flash_info[2] */
|
|
#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
|
|
#define CONFIG_SYS_JFFS2_NUM_BANKS 1
|
|
|
|
#ifndef __ASSEMBLY__
|
|
extern unsigned int boot_flash_base;
|
|
extern volatile unsigned int boot_flash_env_addr;
|
|
extern unsigned int boot_flash_off;
|
|
extern unsigned int boot_flash_sec;
|
|
extern unsigned int boot_flash_type;
|
|
#endif
|
|
|
|
/*----------------------------------------------------------------------------
|
|
* SMSC9115 Ethernet from SMSC9118 family
|
|
*----------------------------------------------------------------------------
|
|
*/
|
|
#if defined(CONFIG_CMD_NET)
|
|
|
|
#define CONFIG_NET_MULTI
|
|
#define CONFIG_SMC911X
|
|
#define CONFIG_SMC911X_32_BIT
|
|
#define CONFIG_SMC911X_BASE 0x2C000000
|
|
|
|
#endif /* (CONFIG_CMD_NET) */
|
|
|
|
/*
|
|
* BOOTP fields
|
|
*/
|
|
|
|
#define CONFIG_BOOTP_SUBNETMASK 0x00000001
|
|
#define CONFIG_BOOTP_GATEWAY 0x00000002
|
|
#define CONFIG_BOOTP_HOSTNAME 0x00000004
|
|
#define CONFIG_BOOTP_BOOTPATH 0x00000010
|
|
|
|
#endif /* __CONFIG_H */
|