mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-15 06:33:45 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
417 lines
11 KiB
C
417 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2006 Freescale Semiconductor, Inc.
|
|
* Dave Liu <daveliu@freescale.com>
|
|
*
|
|
* Copyright (C) 2007 Logic Product Development, Inc.
|
|
* Peter Barada <peterb@logicpd.com>
|
|
*
|
|
* Copyright (C) 2007 MontaVista Software, Inc.
|
|
* Anton Vorontsov <avorontsov@ru.mvista.com>
|
|
*
|
|
* (C) Copyright 2008 - 2010
|
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <ioports.h>
|
|
#include <mpc83xx.h>
|
|
#include <i2c.h>
|
|
#include <miiphy.h>
|
|
#include <asm/io.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/processor.h>
|
|
#include <pci.h>
|
|
#include <linux/libfdt.h>
|
|
#include <post.h>
|
|
|
|
#include "../common/common.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
|
|
|
|
const qe_iop_conf_t qe_iop_conf_tab[] = {
|
|
/* port pin dir open_drain assign */
|
|
#if defined(CONFIG_MPC8360)
|
|
/* MDIO */
|
|
{0, 1, 3, 0, 2}, /* MDIO */
|
|
{0, 2, 1, 0, 1}, /* MDC */
|
|
|
|
/* UCC4 - UEC */
|
|
{1, 14, 1, 0, 1}, /* TxD0 */
|
|
{1, 15, 1, 0, 1}, /* TxD1 */
|
|
{1, 20, 2, 0, 1}, /* RxD0 */
|
|
{1, 21, 2, 0, 1}, /* RxD1 */
|
|
{1, 18, 1, 0, 1}, /* TX_EN */
|
|
{1, 26, 2, 0, 1}, /* RX_DV */
|
|
{1, 27, 2, 0, 1}, /* RX_ER */
|
|
{1, 24, 2, 0, 1}, /* COL */
|
|
{1, 25, 2, 0, 1}, /* CRS */
|
|
{2, 15, 2, 0, 1}, /* TX_CLK - CLK16 */
|
|
{2, 16, 2, 0, 1}, /* RX_CLK - CLK17 */
|
|
|
|
/* DUART - UART2 */
|
|
{5, 0, 1, 0, 2}, /* UART2_SOUT */
|
|
{5, 2, 1, 0, 1}, /* UART2_RTS */
|
|
{5, 3, 2, 0, 2}, /* UART2_SIN */
|
|
{5, 1, 2, 0, 3}, /* UART2_CTS */
|
|
#elif !defined(CONFIG_MPC8309)
|
|
/* Local Bus */
|
|
{0, 16, 1, 0, 3}, /* LA00 */
|
|
{0, 17, 1, 0, 3}, /* LA01 */
|
|
{0, 18, 1, 0, 3}, /* LA02 */
|
|
{0, 19, 1, 0, 3}, /* LA03 */
|
|
{0, 20, 1, 0, 3}, /* LA04 */
|
|
{0, 21, 1, 0, 3}, /* LA05 */
|
|
{0, 22, 1, 0, 3}, /* LA06 */
|
|
{0, 23, 1, 0, 3}, /* LA07 */
|
|
{0, 24, 1, 0, 3}, /* LA08 */
|
|
{0, 25, 1, 0, 3}, /* LA09 */
|
|
{0, 26, 1, 0, 3}, /* LA10 */
|
|
{0, 27, 1, 0, 3}, /* LA11 */
|
|
{0, 28, 1, 0, 3}, /* LA12 */
|
|
{0, 29, 1, 0, 3}, /* LA13 */
|
|
{0, 30, 1, 0, 3}, /* LA14 */
|
|
{0, 31, 1, 0, 3}, /* LA15 */
|
|
|
|
/* MDIO */
|
|
{3, 4, 3, 0, 2}, /* MDIO */
|
|
{3, 5, 1, 0, 2}, /* MDC */
|
|
|
|
/* UCC4 - UEC */
|
|
{1, 18, 1, 0, 1}, /* TxD0 */
|
|
{1, 19, 1, 0, 1}, /* TxD1 */
|
|
{1, 22, 2, 0, 1}, /* RxD0 */
|
|
{1, 23, 2, 0, 1}, /* RxD1 */
|
|
{1, 26, 2, 0, 1}, /* RxER */
|
|
{1, 28, 2, 0, 1}, /* Rx_DV */
|
|
{1, 30, 1, 0, 1}, /* TxEN */
|
|
{1, 31, 2, 0, 1}, /* CRS */
|
|
{3, 10, 2, 0, 3}, /* TxCLK->CLK17 */
|
|
#endif
|
|
|
|
/* END of table */
|
|
{0, 0, 0, 0, QE_IOP_TAB_END},
|
|
};
|
|
|
|
#if defined(CONFIG_SUVD3)
|
|
const uint upma_table[] = {
|
|
0x1ffedc00, 0x0ffcdc80, 0x0ffcdc80, 0x0ffcdc04, /* Words 0 to 3 */
|
|
0x0ffcdc00, 0xffffcc00, 0xffffcc01, 0xfffffc01, /* Words 4 to 7 */
|
|
0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 8 to 11 */
|
|
0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 12 to 15 */
|
|
0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 16 to 19 */
|
|
0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 20 to 23 */
|
|
0x9cfffc00, 0x00fffc80, 0x00fffc80, 0x00fffc00, /* Words 24 to 27 */
|
|
0xffffec04, 0xffffec01, 0xfffffc01, 0xfffffc01, /* Words 28 to 31 */
|
|
0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 32 to 35 */
|
|
0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 36 to 39 */
|
|
0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 40 to 43 */
|
|
0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 44 to 47 */
|
|
0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 48 to 51 */
|
|
0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 52 to 55 */
|
|
0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 56 to 59 */
|
|
0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01 /* Words 60 to 63 */
|
|
};
|
|
#endif
|
|
|
|
static int piggy_present(void)
|
|
{
|
|
struct km_bec_fpga __iomem *base =
|
|
(struct km_bec_fpga __iomem *)CONFIG_SYS_KMBEC_FPGA_BASE;
|
|
|
|
return in_8(&base->bprth) & PIGGY_PRESENT;
|
|
}
|
|
|
|
#if defined(CONFIG_KMVECT1)
|
|
int ethernet_present(void)
|
|
{
|
|
/* ethernet port connected to simple switch without piggy */
|
|
return 1;
|
|
}
|
|
#else
|
|
int ethernet_present(void)
|
|
{
|
|
return piggy_present();
|
|
}
|
|
#endif
|
|
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
struct km_bec_fpga *base =
|
|
(struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE;
|
|
#if defined(CONFIG_SUVD3)
|
|
immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
fsl_lbc_t *lbc = &immap->im_lbc;
|
|
u32 *mxmr = &lbc->mamr;
|
|
#endif
|
|
|
|
#if defined(CONFIG_MPC8360)
|
|
unsigned short svid;
|
|
/*
|
|
* Because of errata in the UCCs, we have to write to the reserved
|
|
* registers to slow the clocks down.
|
|
*/
|
|
svid = SVR_REV(mfspr(SVR));
|
|
switch (svid) {
|
|
case 0x0020:
|
|
/*
|
|
* MPC8360ECE.pdf QE_ENET10 table 4:
|
|
* IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
|
|
* IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
|
|
*/
|
|
setbits_be32((void *)(CONFIG_SYS_IMMR + 0x14a8), 0x0c003000);
|
|
break;
|
|
case 0x0021:
|
|
/*
|
|
* MPC8360ECE.pdf QE_ENET10 table 4:
|
|
* IMMR + 0x14AC[24:27] = 1010
|
|
*/
|
|
clrsetbits_be32((void *)(CONFIG_SYS_IMMR + 0x14ac),
|
|
0x00000050, 0x000000a0);
|
|
break;
|
|
}
|
|
#endif
|
|
|
|
/* enable the PHY on the PIGGY */
|
|
setbits_8(&base->pgy_eth, 0x01);
|
|
/* enable the Unit LED (green) */
|
|
setbits_8(&base->oprth, WRL_BOOT);
|
|
/* enable Application Buffer */
|
|
setbits_8(&base->oprtl, OPRTL_XBUFENA);
|
|
|
|
#if defined(CONFIG_SUVD3)
|
|
/* configure UPMA for APP1 */
|
|
upmconfig(UPMA, (uint *) upma_table,
|
|
sizeof(upma_table) / sizeof(uint));
|
|
out_be32(mxmr, CONFIG_SYS_MAMR);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_KMVECT1)
|
|
#include <mv88e6352.h>
|
|
/* Marvell MV88E6122 switch configuration */
|
|
static struct mv88e_sw_reg extsw_conf[] = {
|
|
/* port 1, FRONT_MDI, autoneg */
|
|
{ PORT(1), PORT_PHY, NO_SPEED_FOR },
|
|
{ PORT(1), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
|
|
{ PHY(1), PHY_1000_CTRL, NO_ADV },
|
|
{ PHY(1), PHY_SPEC_CTRL, AUTO_MDIX_EN },
|
|
{ PHY(1), PHY_CTRL, PHY_100_MBPS | AUTONEG_EN | AUTONEG_RST |
|
|
FULL_DUPLEX },
|
|
/* port 2, unused */
|
|
{ PORT(2), PORT_CTRL, PORT_DIS },
|
|
{ PHY(2), PHY_CTRL, PHY_PWR_DOWN },
|
|
{ PHY(2), PHY_SPEC_CTRL, SPEC_PWR_DOWN },
|
|
/* port 3, BP_MII (CPU), PHY mode, 100BASE */
|
|
{ PORT(3), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
|
|
/* port 4, ESTAR to slot 11, SerDes, 1000BASE-X */
|
|
{ PORT(4), PORT_STATUS, NO_PHY_DETECT },
|
|
{ PORT(4), PORT_PHY, SPEED_1000_FOR },
|
|
{ PORT(4), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
|
|
/* port 5, ESTAR to slot 13, SerDes, 1000BASE-X */
|
|
{ PORT(5), PORT_STATUS, NO_PHY_DETECT },
|
|
{ PORT(5), PORT_PHY, SPEED_1000_FOR },
|
|
{ PORT(5), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
|
|
/*
|
|
* Errata Fix: 1.9V Output from Internal 1.8V Regulator,
|
|
* acc . MV-S300889-00D.pdf , clause 4.5
|
|
*/
|
|
{ PORT(5), 0x1A, 0xADB1 },
|
|
/* port 6, unused, this port has no phy */
|
|
{ PORT(6), PORT_CTRL, PORT_DIS },
|
|
/*
|
|
* Errata Fix: 1.9V Output from Internal 1.8V Regulator,
|
|
* acc . MV-S300889-00D.pdf , clause 4.5
|
|
*/
|
|
{ PORT(5), 0x1A, 0xADB1 },
|
|
};
|
|
#endif
|
|
|
|
int last_stage_init(void)
|
|
{
|
|
#if defined(CONFIG_KMVECT1)
|
|
struct km_bec_fpga __iomem *base =
|
|
(struct km_bec_fpga __iomem *)CONFIG_SYS_KMBEC_FPGA_BASE;
|
|
u8 tmp_reg;
|
|
|
|
/* Release mv88e6122 from reset */
|
|
tmp_reg = in_8(&base->res1[0]) | 0x10; /* DIRECT3 register */
|
|
out_8(&base->res1[0], tmp_reg); /* GP28 as output */
|
|
tmp_reg = in_8(&base->gprt3) | 0x10; /* GP28 to high */
|
|
out_8(&base->gprt3, tmp_reg);
|
|
|
|
/* configure MV88E6122 switch */
|
|
char *name = "UEC2";
|
|
|
|
if (miiphy_set_current_dev(name))
|
|
return 0;
|
|
|
|
mv88e_sw_program(name, CONFIG_KM_MVEXTSW_ADDR, extsw_conf,
|
|
ARRAY_SIZE(extsw_conf));
|
|
|
|
mv88e_sw_reset(name, CONFIG_KM_MVEXTSW_ADDR);
|
|
|
|
if (piggy_present()) {
|
|
env_set("ethact", "UEC2");
|
|
env_set("netdev", "eth1");
|
|
puts("using PIGGY for network boot\n");
|
|
} else {
|
|
env_set("netdev", "eth0");
|
|
puts("using frontport for network boot\n");
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_KMCOGE5NE)
|
|
struct bfticu_iomap *base =
|
|
(struct bfticu_iomap *)CONFIG_SYS_BFTIC3_BASE;
|
|
u8 dip_switch = in_8((u8 *)&(base->mswitch)) & BFTICU_DIPSWITCH_MASK;
|
|
|
|
if (dip_switch != 0) {
|
|
/* start bootloader */
|
|
puts("DIP: Enabled\n");
|
|
env_set("actual_bank", "0");
|
|
}
|
|
#endif
|
|
set_km_env();
|
|
return 0;
|
|
}
|
|
|
|
static int fixed_sdram(void)
|
|
{
|
|
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
|
|
u32 msize = 0;
|
|
u32 ddr_size;
|
|
u32 ddr_size_log2;
|
|
|
|
out_be32(&im->sysconf.ddrlaw[0].ar, (LAWAR_EN | 0x1e));
|
|
out_be32(&im->ddr.csbnds[0].csbnds, (CONFIG_SYS_DDR_CS0_BNDS) | 0x7f);
|
|
out_be32(&im->ddr.cs_config[0], CONFIG_SYS_DDR_CS0_CONFIG);
|
|
out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
|
|
out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
|
|
out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
|
|
out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
|
|
out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG);
|
|
out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_DDR_SDRAM_CFG2);
|
|
out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE);
|
|
out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE2);
|
|
out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL);
|
|
out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CNTL);
|
|
udelay(200);
|
|
setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN);
|
|
|
|
msize = CONFIG_SYS_DDR_SIZE << 20;
|
|
disable_addr_trans();
|
|
msize = get_ram_size(CONFIG_SYS_DDR_BASE, msize);
|
|
enable_addr_trans();
|
|
msize /= (1024 * 1024);
|
|
if (CONFIG_SYS_DDR_SIZE != msize) {
|
|
for (ddr_size = msize << 20, ddr_size_log2 = 0;
|
|
(ddr_size > 1);
|
|
ddr_size = ddr_size >> 1, ddr_size_log2++)
|
|
if (ddr_size & 1)
|
|
return -1;
|
|
out_be32(&im->sysconf.ddrlaw[0].ar,
|
|
(LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE)));
|
|
out_be32(&im->ddr.csbnds[0].csbnds,
|
|
(((msize / 16) - 1) & 0xff));
|
|
}
|
|
|
|
return msize;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
|
|
u32 msize = 0;
|
|
|
|
if ((in_be32(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32)im)
|
|
return -ENXIO;
|
|
|
|
out_be32(&im->sysconf.ddrlaw[0].bar,
|
|
CONFIG_SYS_DDR_BASE & LAWBAR_BAR);
|
|
msize = fixed_sdram();
|
|
|
|
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
|
|
/*
|
|
* Initialize DDR ECC byte
|
|
*/
|
|
ddr_enable_ecc(msize * 1024 * 1024);
|
|
#endif
|
|
|
|
/* return total bus SDRAM size(bytes) -- DDR */
|
|
gd->ram_size = msize * 1024 * 1024;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
puts("Board: Keymile " CONFIG_KM_BOARD_NAME);
|
|
|
|
if (piggy_present())
|
|
puts(" with PIGGY.");
|
|
puts("\n");
|
|
return 0;
|
|
}
|
|
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_HUSH_INIT_VAR)
|
|
int hush_init_var(void)
|
|
{
|
|
ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_POST)
|
|
int post_hotkeys_pressed(void)
|
|
{
|
|
int testpin = 0;
|
|
struct km_bec_fpga *base =
|
|
(struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE;
|
|
int testpin_reg = in_8(&base->CONFIG_TESTPIN_REG);
|
|
testpin = (testpin_reg & CONFIG_TESTPIN_MASK) != 0;
|
|
debug("post_hotkeys_pressed: %d\n", !testpin);
|
|
return testpin;
|
|
}
|
|
|
|
ulong post_word_load(void)
|
|
{
|
|
void* addr = (ulong *) (CPM_POST_WORD_ADDR);
|
|
debug("post_word_load 0x%08lX: 0x%08X\n", (ulong)addr, in_le32(addr));
|
|
return in_le32(addr);
|
|
|
|
}
|
|
void post_word_store(ulong value)
|
|
{
|
|
void* addr = (ulong *) (CPM_POST_WORD_ADDR);
|
|
debug("post_word_store 0x%08lX: 0x%08lX\n", (ulong)addr, value);
|
|
out_le32(addr, value);
|
|
}
|
|
|
|
int arch_memory_test_prepare(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
|
|
{
|
|
*vstart = CONFIG_SYS_MEMTEST_START;
|
|
*size = CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START;
|
|
debug("arch_memory_test_prepare 0x%08X 0x%08X\n", *vstart, *size);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|