mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-15 06:33:45 +09:00
![Dirk Eibach](/assets/img/avatar_default.png)
The gdsys ControlCenter Digital board is based on a Marvell Armada 38x SOC. It boots from SPI-Flash but can be configured to boot from SD-card for factory programming and testing. On board peripherals include: - 2 x GbE - Xilinx Kintex-7 FPGA connected via PCIe - mSATA - USB3 host - Atmel TPM Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Mario Six <mario.six@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de>
139 lines
2.7 KiB
C
139 lines
2.7 KiB
C
#include <common.h>
|
|
#include <console.h> /* ctrlc */
|
|
#include <asm/io.h>
|
|
|
|
#include "hydra.h"
|
|
|
|
enum {
|
|
HWVER_100 = 0,
|
|
HWVER_110 = 1,
|
|
HWVER_120 = 2,
|
|
};
|
|
|
|
static struct pci_device_id hydra_supported[] = {
|
|
{ 0x6d5e, 0xcdc1 },
|
|
{}
|
|
};
|
|
|
|
static struct ihs_fpga *fpga;
|
|
|
|
struct ihs_fpga *get_fpga(void)
|
|
{
|
|
return fpga;
|
|
}
|
|
|
|
void print_hydra_version(uint index)
|
|
{
|
|
u32 versions = readl(&fpga->versions);
|
|
u32 fpga_version = readl(&fpga->fpga_version);
|
|
|
|
uint hardware_version = versions & 0xf;
|
|
|
|
printf("FPGA%u: mapped to %p\n ", index, fpga);
|
|
|
|
switch (hardware_version) {
|
|
case HWVER_100:
|
|
printf("HW-Ver 1.00\n");
|
|
break;
|
|
|
|
case HWVER_110:
|
|
printf("HW-Ver 1.10\n");
|
|
break;
|
|
|
|
case HWVER_120:
|
|
printf("HW-Ver 1.20\n");
|
|
break;
|
|
|
|
default:
|
|
printf("HW-Ver %d(not supported)\n",
|
|
hardware_version);
|
|
break;
|
|
}
|
|
|
|
printf(" FPGA V %d.%02d\n",
|
|
fpga_version / 100, fpga_version % 100);
|
|
}
|
|
|
|
void hydra_initialize(void)
|
|
{
|
|
uint i;
|
|
pci_dev_t devno;
|
|
|
|
/* Find and probe all the matching PCI devices */
|
|
for (i = 0; (devno = pci_find_devices(hydra_supported, i)) >= 0; i++) {
|
|
u32 val;
|
|
|
|
/* Try to enable I/O accesses and bus-mastering */
|
|
val = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
|
|
pci_write_config_dword(devno, PCI_COMMAND, val);
|
|
|
|
/* Make sure it worked */
|
|
pci_read_config_dword(devno, PCI_COMMAND, &val);
|
|
if (!(val & PCI_COMMAND_MEMORY)) {
|
|
puts("Can't enable I/O memory\n");
|
|
continue;
|
|
}
|
|
if (!(val & PCI_COMMAND_MASTER)) {
|
|
puts("Can't enable bus-mastering\n");
|
|
continue;
|
|
}
|
|
|
|
/* read FPGA details */
|
|
fpga = pci_map_bar(devno, PCI_BASE_ADDRESS_0,
|
|
PCI_REGION_MEM);
|
|
|
|
print_hydra_version(i);
|
|
}
|
|
}
|
|
|
|
#define REFL_PATTERN (0xdededede)
|
|
#define REFL_PATTERN_INV (~REFL_PATTERN)
|
|
|
|
int do_hydrate(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
uint k = 0;
|
|
void __iomem *pcie2_base = (void __iomem *)(MVEBU_REG_PCIE_BASE +
|
|
0x4000);
|
|
|
|
if (!fpga)
|
|
return -1;
|
|
|
|
while (1) {
|
|
u32 res;
|
|
|
|
writel(REFL_PATTERN, &fpga->reflection_low);
|
|
res = readl(&fpga->reflection_low);
|
|
if (res != REFL_PATTERN_INV)
|
|
printf("round %u: read %08x, expected %08x\n",
|
|
k, res, REFL_PATTERN_INV);
|
|
writel(REFL_PATTERN_INV, &fpga->reflection_low);
|
|
res = readl(&fpga->reflection_low);
|
|
if (res != REFL_PATTERN)
|
|
printf("round %u: read %08x, expected %08x\n",
|
|
k, res, REFL_PATTERN);
|
|
|
|
res = readl(pcie2_base + 0x118) & 0x1f;
|
|
if (res)
|
|
printf("FrstErrPtr %u\n", res);
|
|
res = readl(pcie2_base + 0x104);
|
|
if (res) {
|
|
printf("Uncorrectable Error Status 0x%08x\n", res);
|
|
writel(res, pcie2_base + 0x104);
|
|
}
|
|
|
|
if (!(++k % 10000))
|
|
printf("round %u\n", k);
|
|
|
|
if (ctrlc())
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
hydrate, 1, 0, do_hydrate,
|
|
"hydra reflection test",
|
|
"hydra reflection test"
|
|
);
|