u-boot-brain/drivers/block/Makefile
Tang Yuantian 83c484d7ec drivers: add the support for Silicon Image SATA controller
Add the Silicon Image series PCI Express to
Serial ATA controller support, including Sil3132,
Sil3131 and Sil3124.
The SATA controller can be used to load kernel.

The features list:
	- Supports 1-lane 2.5 Gbit/s PCI Express
	- Supports one/two/four independent Serial ATA channels
	- Supports Serial ATA Generation 2 transfer rate of 3.0 Gbit/s
	- Supports LBA28 and LBA48

Signed-off-by: Tang Yuantian <b29983@freescale.com>
Signed-off-by: Aaron Williams <Aaron.Williams@cavium.com>
Tested-by: Lan Chunhe <b25806@freescale.com>
2011-10-22 01:03:54 +02:00

61 lines
1.9 KiB
Makefile

#
# (C) Copyright 2000-2007
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB := $(obj)libblock.o
COBJS-$(CONFIG_SCSI_AHCI) += ahci.o
COBJS-$(CONFIG_ATA_PIIX) += ata_piix.o
COBJS-$(CONFIG_FSL_SATA) += fsl_sata.o
COBJS-$(CONFIG_IDE_FTIDE020) += ftide020.o
COBJS-$(CONFIG_LIBATA) += libata.o
COBJS-$(CONFIG_CMD_MG_DISK) += mg_disk.o
COBJS-$(CONFIG_MVSATA_IDE) += mvsata_ide.o
COBJS-$(CONFIG_MX51_PATA) += mxc_ata.o
COBJS-$(CONFIG_PATA_BFIN) += pata_bfin.o
COBJS-$(CONFIG_SATA_DWC) += sata_dwc.o
COBJS-$(CONFIG_SATA_SIL3114) += sata_sil3114.o
COBJS-$(CONFIG_SATA_SIL) += sata_sil.o
COBJS-$(CONFIG_IDE_SIL680) += sil680.o
COBJS-$(CONFIG_SCSI_SYM53C8XX) += sym53c8xx.o
COBJS-$(CONFIG_SYSTEMACE) += systemace.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
$(call cmd_link_o_target, $(OBJS))
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################