mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 17:08:52 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
250 lines
6.4 KiB
C
250 lines
6.4 KiB
C
// SPDX-License-Identifier: BSD-3-Clause
|
|
/*
|
|
* Copyright (C) 2012 Altera Corporation <www.altera.com>
|
|
* All rights reserved.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/arch/fpga_manager.h>
|
|
#include <asm/arch/reset_manager.h>
|
|
#include <asm/arch/system_manager.h>
|
|
|
|
#define FPGA_TIMEOUT_CNT 0x1000000
|
|
|
|
static struct socfpga_fpga_manager *fpgamgr_regs =
|
|
(struct socfpga_fpga_manager *)SOCFPGA_FPGAMGRREGS_ADDRESS;
|
|
static struct socfpga_system_manager *sysmgr_regs =
|
|
(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
|
|
|
|
/* Set CD ratio */
|
|
static void fpgamgr_set_cd_ratio(unsigned long ratio)
|
|
{
|
|
clrsetbits_le32(&fpgamgr_regs->ctrl,
|
|
0x3 << FPGAMGRREGS_CTRL_CDRATIO_LSB,
|
|
(ratio & 0x3) << FPGAMGRREGS_CTRL_CDRATIO_LSB);
|
|
}
|
|
|
|
/* Start the FPGA programming by initialize the FPGA Manager */
|
|
static int fpgamgr_program_init(void)
|
|
{
|
|
unsigned long msel, i;
|
|
|
|
/* Get the MSEL value */
|
|
msel = readl(&fpgamgr_regs->stat);
|
|
msel &= FPGAMGRREGS_STAT_MSEL_MASK;
|
|
msel >>= FPGAMGRREGS_STAT_MSEL_LSB;
|
|
|
|
/*
|
|
* Set the cfg width
|
|
* If MSEL[3] = 1, cfg width = 32 bit
|
|
*/
|
|
if (msel & 0x8) {
|
|
setbits_le32(&fpgamgr_regs->ctrl,
|
|
FPGAMGRREGS_CTRL_CFGWDTH_MASK);
|
|
|
|
/* To determine the CD ratio */
|
|
/* MSEL[1:0] = 0, CD Ratio = 1 */
|
|
if ((msel & 0x3) == 0x0)
|
|
fpgamgr_set_cd_ratio(CDRATIO_x1);
|
|
/* MSEL[1:0] = 1, CD Ratio = 4 */
|
|
else if ((msel & 0x3) == 0x1)
|
|
fpgamgr_set_cd_ratio(CDRATIO_x4);
|
|
/* MSEL[1:0] = 2, CD Ratio = 8 */
|
|
else if ((msel & 0x3) == 0x2)
|
|
fpgamgr_set_cd_ratio(CDRATIO_x8);
|
|
|
|
} else { /* MSEL[3] = 0 */
|
|
clrbits_le32(&fpgamgr_regs->ctrl,
|
|
FPGAMGRREGS_CTRL_CFGWDTH_MASK);
|
|
|
|
/* To determine the CD ratio */
|
|
/* MSEL[1:0] = 0, CD Ratio = 1 */
|
|
if ((msel & 0x3) == 0x0)
|
|
fpgamgr_set_cd_ratio(CDRATIO_x1);
|
|
/* MSEL[1:0] = 1, CD Ratio = 2 */
|
|
else if ((msel & 0x3) == 0x1)
|
|
fpgamgr_set_cd_ratio(CDRATIO_x2);
|
|
/* MSEL[1:0] = 2, CD Ratio = 4 */
|
|
else if ((msel & 0x3) == 0x2)
|
|
fpgamgr_set_cd_ratio(CDRATIO_x4);
|
|
}
|
|
|
|
/* To enable FPGA Manager configuration */
|
|
clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_NCE_MASK);
|
|
|
|
/* To enable FPGA Manager drive over configuration line */
|
|
setbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_EN_MASK);
|
|
|
|
/* Put FPGA into reset phase */
|
|
setbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_NCONFIGPULL_MASK);
|
|
|
|
/* (1) wait until FPGA enter reset phase */
|
|
for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
|
|
if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_RESETPHASE)
|
|
break;
|
|
}
|
|
|
|
/* If not in reset state, return error */
|
|
if (fpgamgr_get_mode() != FPGAMGRREGS_MODE_RESETPHASE) {
|
|
puts("FPGA: Could not reset\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Release FPGA from reset phase */
|
|
clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_NCONFIGPULL_MASK);
|
|
|
|
/* (2) wait until FPGA enter configuration phase */
|
|
for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
|
|
if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_CFGPHASE)
|
|
break;
|
|
}
|
|
|
|
/* If not in configuration state, return error */
|
|
if (fpgamgr_get_mode() != FPGAMGRREGS_MODE_CFGPHASE) {
|
|
puts("FPGA: Could not configure\n");
|
|
return -2;
|
|
}
|
|
|
|
/* Clear all interrupts in CB Monitor */
|
|
writel(0xFFF, &fpgamgr_regs->gpio_porta_eoi);
|
|
|
|
/* Enable AXI configuration */
|
|
setbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_AXICFGEN_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Ensure the FPGA entering config done */
|
|
static int fpgamgr_program_poll_cd(void)
|
|
{
|
|
const uint32_t mask = FPGAMGRREGS_MON_GPIO_EXT_PORTA_NS_MASK |
|
|
FPGAMGRREGS_MON_GPIO_EXT_PORTA_CD_MASK;
|
|
unsigned long reg, i;
|
|
|
|
/* (3) wait until full config done */
|
|
for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
|
|
reg = readl(&fpgamgr_regs->gpio_ext_porta);
|
|
|
|
/* Config error */
|
|
if (!(reg & mask)) {
|
|
printf("FPGA: Configuration error.\n");
|
|
return -3;
|
|
}
|
|
|
|
/* Config done without error */
|
|
if (reg & mask)
|
|
break;
|
|
}
|
|
|
|
/* Timeout happened, return error */
|
|
if (i == FPGA_TIMEOUT_CNT) {
|
|
printf("FPGA: Timeout waiting for program.\n");
|
|
return -4;
|
|
}
|
|
|
|
/* Disable AXI configuration */
|
|
clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_AXICFGEN_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Ensure the FPGA entering init phase */
|
|
static int fpgamgr_program_poll_initphase(void)
|
|
{
|
|
unsigned long i;
|
|
|
|
/* Additional clocks for the CB to enter initialization phase */
|
|
if (fpgamgr_dclkcnt_set(0x4))
|
|
return -5;
|
|
|
|
/* (4) wait until FPGA enter init phase or user mode */
|
|
for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
|
|
if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_INITPHASE)
|
|
break;
|
|
if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_USERMODE)
|
|
break;
|
|
}
|
|
|
|
/* If not in configuration state, return error */
|
|
if (i == FPGA_TIMEOUT_CNT)
|
|
return -6;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Ensure the FPGA entering user mode */
|
|
static int fpgamgr_program_poll_usermode(void)
|
|
{
|
|
unsigned long i;
|
|
|
|
/* Additional clocks for the CB to exit initialization phase */
|
|
if (fpgamgr_dclkcnt_set(0x5000))
|
|
return -7;
|
|
|
|
/* (5) wait until FPGA enter user mode */
|
|
for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
|
|
if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_USERMODE)
|
|
break;
|
|
}
|
|
/* If not in configuration state, return error */
|
|
if (i == FPGA_TIMEOUT_CNT)
|
|
return -8;
|
|
|
|
/* To release FPGA Manager drive over configuration line */
|
|
clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_EN_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* FPGA Manager to program the FPGA. This is the interface used by FPGA driver.
|
|
* Return 0 for sucess, non-zero for error.
|
|
*/
|
|
int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size)
|
|
{
|
|
unsigned long status;
|
|
|
|
if ((uint32_t)rbf_data & 0x3) {
|
|
puts("FPGA: Unaligned data, realign to 32bit boundary.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Prior programming the FPGA, all bridges need to be shut off */
|
|
|
|
/* Disable all signals from hps peripheral controller to fpga */
|
|
writel(0, &sysmgr_regs->fpgaintfgrp_module);
|
|
|
|
/* Disable all signals from FPGA to HPS SDRAM */
|
|
#define SDR_CTRLGRP_FPGAPORTRST_ADDRESS 0x5080
|
|
writel(0, SOCFPGA_SDR_ADDRESS + SDR_CTRLGRP_FPGAPORTRST_ADDRESS);
|
|
|
|
/* Disable all axi bridge (hps2fpga, lwhps2fpga & fpga2hps) */
|
|
socfpga_bridges_reset(1);
|
|
|
|
/* Unmap the bridges from NIC-301 */
|
|
writel(0x1, SOCFPGA_L3REGS_ADDRESS);
|
|
|
|
/* Initialize the FPGA Manager */
|
|
status = fpgamgr_program_init();
|
|
if (status)
|
|
return status;
|
|
|
|
/* Write the RBF data to FPGA Manager */
|
|
fpgamgr_program_write(rbf_data, rbf_size);
|
|
|
|
/* Ensure the FPGA entering config done */
|
|
status = fpgamgr_program_poll_cd();
|
|
if (status)
|
|
return status;
|
|
|
|
/* Ensure the FPGA entering init phase */
|
|
status = fpgamgr_program_poll_initphase();
|
|
if (status)
|
|
return status;
|
|
|
|
/* Ensure the FPGA entering user mode */
|
|
return fpgamgr_program_poll_usermode();
|
|
}
|