mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-16 23:18:51 +09:00
![wdenk](/assets/img/avatar_default.png)
- Added I2C support for ML300. - Added support for ML300 to read out its environment information stored on the EEPROM. - Added support to use board specific parameters as part of U-Boot's environment information. - Updated MLD files to support configuration for new features above. * Patches by Travis Sawyer, 5 Aug 2004: - Remove incorrect bridge settings for eth group 6 - Add call to setup bridge in ppc_440x_eth_initialize - Fix ppc_440x_eth_init to reset the phy only if its the first time through, otherwise, just check the phy for the autonegotiated speed/duplex. This allows the use of netconsole - only print the speed/duplex the first time the phy is reset.
747 lines
28 KiB
C
747 lines
28 KiB
C
/* $Id: xipif_v1_23_b.h,v 1.1 2002/03/18 23:24:52 linnj Exp $ */
|
|
/******************************************************************************
|
|
*
|
|
* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
|
|
* AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
|
|
* SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
|
|
* OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
|
|
* APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
|
|
* THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
|
|
* AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
|
|
* FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
|
|
* WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
|
|
* IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
|
|
* REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
|
|
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE.
|
|
*
|
|
* (c) Copyright 2002 Xilinx Inc.
|
|
* All rights reserved.
|
|
*
|
|
******************************************************************************/
|
|
/******************************************************************************
|
|
*
|
|
* FILENAME:
|
|
*
|
|
* xipif.h
|
|
*
|
|
* DESCRIPTION:
|
|
*
|
|
* The XIpIf component encapsulates the IPIF, which is the standard interface
|
|
* that IP must adhere to when connecting to a bus. The purpose of this
|
|
* component is to encapsulate the IPIF processing such that maintainability
|
|
* is increased. This component does not provide a lot of abstraction from
|
|
* from the details of the IPIF as it is considered a building block for
|
|
* device drivers. A device driver designer must be familiar with the
|
|
* details of the IPIF hardware to use this component.
|
|
*
|
|
* The IPIF hardware provides a building block for all hardware devices such
|
|
* that each device does not need to reimplement these building blocks. The
|
|
* IPIF contains other building blocks, such as FIFOs and DMA channels, which
|
|
* are also common to many devices. These blocks are implemented as separate
|
|
* hardware blocks and instantiated within the IPIF. The primary hardware of
|
|
* the IPIF which is implemented by this software component is the interrupt
|
|
* architecture. Since there are many blocks of a device which may generate
|
|
* interrupts, all the interrupt processing is contained in the common part
|
|
* of the device, the IPIF. This interrupt processing is for the device level
|
|
* only and does not include any processing for the interrupt controller.
|
|
*
|
|
* A device is a mechanism such as an Ethernet MAC. The device is made
|
|
* up of several parts which include an IPIF and the IP. The IPIF contains most
|
|
* of the device infrastructure which is common to all devices, such as
|
|
* interrupt processing, DMA channels, and FIFOs. The infrastructure may also
|
|
* be referred to as IPIF internal blocks since they are part of the IPIF and
|
|
* are separate blocks that can be selected based upon the needs of the device.
|
|
* The IP of the device is the logic that is unique to the device and interfaces
|
|
* to the IPIF of the device.
|
|
*
|
|
* In general, there are two levels of registers within the IPIF. The first
|
|
* level, referred to as the device level, contains registers which are for the
|
|
* entire device. The second level, referred to as the IP level, contains
|
|
* registers which are specific to the IP of the device. The two levels of
|
|
* registers are designed to be hierarchical such that the device level is
|
|
* is a more general register set above the more specific registers of the IP.
|
|
* The IP level of registers provides functionality which is typically common
|
|
* across all devices and allows IP designers to focus on the unique aspects
|
|
* of the IP.
|
|
*
|
|
* Critical Sections
|
|
*
|
|
* It is the responsibility of the device driver designer to use critical
|
|
* sections as necessary when calling functions of the IPIF. This component
|
|
* does not use critical sections and it does access registers using
|
|
* read-modify-write operations. Calls to IPIF functions from a main thread
|
|
* and from an interrupt context could produce unpredictable behavior such that
|
|
* the caller must provide the appropriate critical sections.
|
|
*
|
|
* Mutual Exclusion
|
|
*
|
|
* The functions of the IPIF are not thread safe such that the caller of all
|
|
* functions is responsible for ensuring mutual exclusion for an IPIF. Mutual
|
|
* exclusion across multiple IPIF components is not necessary.
|
|
*
|
|
* NOTES:
|
|
*
|
|
* None.
|
|
*
|
|
* MODIFICATION HISTORY:
|
|
*
|
|
* Ver Who Date Changes
|
|
* ----- ---- -------- -----------------------------------------------
|
|
* 1.23b jhl 02/27/01 Repartioned to minimize size
|
|
*
|
|
******************************************************************************/
|
|
|
|
#ifndef XIPIF_H /* prevent circular inclusions */
|
|
#define XIPIF_H /* by using protection macros */
|
|
|
|
/***************************** Include Files *********************************/
|
|
#include "xbasic_types.h"
|
|
#include "xstatus.h"
|
|
#include "xversion.h"
|
|
|
|
/************************** Constant Definitions *****************************/
|
|
|
|
/* the following constants define the register offsets for the registers of the
|
|
* IPIF, there are some holes in the memory map for reserved addresses to allow
|
|
* other registers to be added and still match the memory map of the interrupt
|
|
* controller registers
|
|
*/
|
|
#define XIIF_V123B_DISR_OFFSET 0UL /* device interrupt status register */
|
|
#define XIIF_V123B_DIPR_OFFSET 4UL /* device interrupt pending register */
|
|
#define XIIF_V123B_DIER_OFFSET 8UL /* device interrupt enable register */
|
|
#define XIIF_V123B_DIIR_OFFSET 24UL /* device interrupt ID register */
|
|
#define XIIF_V123B_DGIER_OFFSET 28UL /* device global interrupt enable reg */
|
|
#define XIIF_V123B_IISR_OFFSET 32UL /* IP interrupt status register */
|
|
#define XIIF_V123B_IIER_OFFSET 40UL /* IP interrupt enable register */
|
|
#define XIIF_V123B_RESETR_OFFSET 64UL /* reset register */
|
|
|
|
#define XIIF_V123B_RESET_MASK 0xAUL
|
|
|
|
/* the following constant is used for the device global interrupt enable
|
|
* register, to enable all interrupts for the device, this is the only bit
|
|
* in the register
|
|
*/
|
|
#define XIIF_V123B_GINTR_ENABLE_MASK 0x80000000UL
|
|
|
|
/* the following constants contain the masks to identify each internal IPIF
|
|
* condition in the device registers of the IPIF, interrupts are assigned
|
|
* in the register from LSB to the MSB
|
|
*/
|
|
#define XIIF_V123B_ERROR_MASK 1UL /* LSB of the register */
|
|
|
|
/* The following constants contain interrupt IDs which identify each internal
|
|
* IPIF condition, this value must correlate with the mask constant for the
|
|
* error
|
|
*/
|
|
#define XIIF_V123B_ERROR_INTERRUPT_ID 0 /* interrupt bit #, (LSB = 0) */
|
|
#define XIIF_V123B_NO_INTERRUPT_ID 128 /* no interrupts are pending */
|
|
|
|
/**************************** Type Definitions *******************************/
|
|
|
|
/***************** Macros (Inline Functions) Definitions *********************/
|
|
|
|
/******************************************************************************
|
|
*
|
|
* MACRO:
|
|
*
|
|
* XIIF_V123B_RESET
|
|
*
|
|
* DESCRIPTION:
|
|
*
|
|
* Reset the IPIF component and hardware. This is a destructive operation that
|
|
* could cause the loss of data since resetting the IPIF of a device also
|
|
* resets the device using the IPIF and any blocks, such as FIFOs or DMA
|
|
* channels, within the IPIF. All registers of the IPIF will contain their
|
|
* reset value when this function returns.
|
|
*
|
|
* ARGUMENTS:
|
|
*
|
|
* RegBaseAddress contains the base address of the IPIF registers.
|
|
*
|
|
* RETURN VALUE:
|
|
*
|
|
* None.
|
|
*
|
|
* NOTES:
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
|
|
/* the following constant is used in the reset register to cause the IPIF to
|
|
* reset
|
|
*/
|
|
#define XIIF_V123B_RESET(RegBaseAddress) \
|
|
XIo_Out32(RegBaseAddress + XIIF_V123B_RESETR_OFFSET, XIIF_V123B_RESET_MASK)
|
|
|
|
/******************************************************************************
|
|
*
|
|
* MACRO:
|
|
*
|
|
* XIIF_V123B_WRITE_DISR
|
|
*
|
|
* DESCRIPTION:
|
|
*
|
|
* This function sets the device interrupt status register to the value.
|
|
* This register indicates the status of interrupt sources for a device
|
|
* which contains the IPIF. The status is independent of whether interrupts
|
|
* are enabled and could be used for polling a device at a higher level rather
|
|
* than a more detailed level.
|
|
*
|
|
* Each bit of the register correlates to a specific interrupt source within the
|
|
* device which contains the IPIF. With the exception of some internal IPIF
|
|
* conditions, the contents of this register are not latched but indicate
|
|
* the live status of the interrupt sources within the device. Writing any of
|
|
* the non-latched bits of the register will have no effect on the register.
|
|
*
|
|
* For the latched bits of this register only, setting a bit which is zero
|
|
* within this register causes an interrupt to generated. The device global
|
|
* interrupt enable register and the device interrupt enable register must be set
|
|
* appropriately to allow an interrupt to be passed out of the device. The
|
|
* interrupt is cleared by writing to this register with the bits to be
|
|
* cleared set to a one and all others to zero. This register implements a
|
|
* toggle on write functionality meaning any bits which are set in the value
|
|
* written cause the bits in the register to change to the opposite state.
|
|
*
|
|
* This function writes the specified value to the register such that
|
|
* some bits may be set and others cleared. It is the caller's responsibility
|
|
* to get the value of the register prior to setting the value to prevent a
|
|
* destructive behavior.
|
|
*
|
|
* ARGUMENTS:
|
|
*
|
|
* RegBaseAddress contains the base address of the IPIF registers.
|
|
*
|
|
* Status contains the value to be written to the interrupt status register of
|
|
* the device. The only bits which can be written are the latched bits which
|
|
* contain the internal IPIF conditions. The following values may be used to
|
|
* set the status register or clear an interrupt condition.
|
|
*
|
|
* XIIF_V123B_ERROR_MASK Indicates a device error in the IPIF
|
|
*
|
|
* RETURN VALUE:
|
|
*
|
|
* None.
|
|
*
|
|
* NOTES:
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
#define XIIF_V123B_WRITE_DISR(RegBaseAddress, Status) \
|
|
XIo_Out32((RegBaseAddress) + XIIF_V123B_DISR_OFFSET, (Status))
|
|
|
|
/******************************************************************************
|
|
*
|
|
* MACRO:
|
|
*
|
|
* XIIF_V123B_READ_DISR
|
|
*
|
|
* DESCRIPTION:
|
|
*
|
|
* This function gets the device interrupt status register contents.
|
|
* This register indicates the status of interrupt sources for a device
|
|
* which contains the IPIF. The status is independent of whether interrupts
|
|
* are enabled and could be used for polling a device at a higher level.
|
|
*
|
|
* Each bit of the register correlates to a specific interrupt source within the
|
|
* device which contains the IPIF. With the exception of some internal IPIF
|
|
* conditions, the contents of this register are not latched but indicate
|
|
* the live status of the interrupt sources within the device.
|
|
*
|
|
* For only the latched bits of this register, the interrupt may be cleared by
|
|
* writing to these bits in the status register.
|
|
*
|
|
* ARGUMENTS:
|
|
*
|
|
* RegBaseAddress contains the base address of the IPIF registers.
|
|
*
|
|
* RETURN VALUE:
|
|
*
|
|
* A status which contains the value read from the interrupt status register of
|
|
* the device. The bit definitions are specific to the device with
|
|
* the exception of the latched internal IPIF condition bits. The following
|
|
* values may be used to detect internal IPIF conditions in the status.
|
|
*
|
|
* XIIF_V123B_ERROR_MASK Indicates a device error in the IPIF
|
|
*
|
|
* NOTES:
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
#define XIIF_V123B_READ_DISR(RegBaseAddress) \
|
|
XIo_In32((RegBaseAddress) + XIIF_V123B_DISR_OFFSET)
|
|
|
|
/******************************************************************************
|
|
*
|
|
* MACRO:
|
|
*
|
|
* XIIF_V123B_WRITE_DIER
|
|
*
|
|
* DESCRIPTION:
|
|
*
|
|
* This function sets the device interrupt enable register contents.
|
|
* This register controls which interrupt sources of the device are allowed to
|
|
* generate an interrupt. The device global interrupt enable register must also
|
|
* be set appropriately for an interrupt to be passed out of the device.
|
|
*
|
|
* Each bit of the register correlates to a specific interrupt source within the
|
|
* device which contains the IPIF. Setting a bit in this register enables that
|
|
* interrupt source to generate an interrupt. Clearing a bit in this register
|
|
* disables interrupt generation for that interrupt source.
|
|
*
|
|
* This function writes only the specified value to the register such that
|
|
* some interrupts source may be enabled and others disabled. It is the
|
|
* caller's responsibility to get the value of the interrupt enable register
|
|
* prior to setting the value to prevent an destructive behavior.
|
|
*
|
|
* An interrupt source may not be enabled to generate an interrupt, but can
|
|
* still be polled in the interrupt status register.
|
|
*
|
|
* ARGUMENTS:
|
|
*
|
|
* RegBaseAddress contains the base address of the IPIF registers.
|
|
*
|
|
* Enable contains the value to be written to the interrupt enable register
|
|
* of the device. The bit definitions are specific to the device with
|
|
* the exception of the internal IPIF conditions. The following
|
|
* values may be used to enable the internal IPIF conditions interrupts.
|
|
*
|
|
* XIIF_V123B_ERROR_MASK Indicates a device error in the IPIF
|
|
*
|
|
* RETURN VALUE:
|
|
*
|
|
* None.
|
|
*
|
|
* NOTES:
|
|
*
|
|
* Signature: u32 XIIF_V123B_WRITE_DIER(u32 RegBaseAddress,
|
|
* u32 Enable)
|
|
*
|
|
******************************************************************************/
|
|
#define XIIF_V123B_WRITE_DIER(RegBaseAddress, Enable) \
|
|
XIo_Out32((RegBaseAddress) + XIIF_V123B_DIER_OFFSET, (Enable))
|
|
|
|
/******************************************************************************
|
|
*
|
|
* MACRO:
|
|
*
|
|
* XIIF_V123B_READ_DIER
|
|
*
|
|
* DESCRIPTION:
|
|
*
|
|
* This function gets the device interrupt enable register contents.
|
|
* This register controls which interrupt sources of the device
|
|
* are allowed to generate an interrupt. The device global interrupt enable
|
|
* register and the device interrupt enable register must also be set
|
|
* appropriately for an interrupt to be passed out of the device.
|
|
*
|
|
* Each bit of the register correlates to a specific interrupt source within the
|
|
* device which contains the IPIF. Setting a bit in this register enables that
|
|
* interrupt source to generate an interrupt if the global enable is set
|
|
* appropriately. Clearing a bit in this register disables interrupt generation
|
|
* for that interrupt source regardless of the global interrupt enable.
|
|
*
|
|
* ARGUMENTS:
|
|
*
|
|
* RegBaseAddress contains the base address of the IPIF registers.
|
|
*
|
|
* RETURN VALUE:
|
|
*
|
|
* The value read from the interrupt enable register of the device. The bit
|
|
* definitions are specific to the device with the exception of the internal
|
|
* IPIF conditions. The following values may be used to determine from the
|
|
* value if the internal IPIF conditions interrupts are enabled.
|
|
*
|
|
* XIIF_V123B_ERROR_MASK Indicates a device error in the IPIF
|
|
*
|
|
* NOTES:
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
#define XIIF_V123B_READ_DIER(RegBaseAddress) \
|
|
XIo_In32((RegBaseAddress) + XIIF_V123B_DIER_OFFSET)
|
|
|
|
/******************************************************************************
|
|
*
|
|
* MACRO:
|
|
*
|
|
* XIIF_V123B_READ_DIPR
|
|
*
|
|
* DESCRIPTION:
|
|
*
|
|
* This function gets the device interrupt pending register contents.
|
|
* This register indicates the pending interrupt sources, those that are waiting
|
|
* to be serviced by the software, for a device which contains the IPIF.
|
|
* An interrupt must be enabled in the interrupt enable register of the IPIF to
|
|
* be pending.
|
|
*
|
|
* Each bit of the register correlates to a specific interrupt source within the
|
|
* the device which contains the IPIF. With the exception of some internal IPIF
|
|
* conditions, the contents of this register are not latched since the condition
|
|
* is latched in the IP interrupt status register, by an internal block of the
|
|
* IPIF such as a FIFO or DMA channel, or by the IP of the device. This register
|
|
* is read only and is not latched, but it is necessary to acknowledge (clear)
|
|
* the interrupt condition by performing the appropriate processing for the IP
|
|
* or block within the IPIF.
|
|
*
|
|
* This register can be thought of as the contents of the interrupt status
|
|
* register ANDed with the contents of the interrupt enable register.
|
|
*
|
|
* ARGUMENTS:
|
|
*
|
|
* RegBaseAddress contains the base address of the IPIF registers.
|
|
*
|
|
* RETURN VALUE:
|
|
*
|
|
* The value read from the interrupt pending register of the device. The bit
|
|
* definitions are specific to the device with the exception of the latched
|
|
* internal IPIF condition bits. The following values may be used to detect
|
|
* internal IPIF conditions in the value.
|
|
*
|
|
* XIIF_V123B_ERROR_MASK Indicates a device error in the IPIF
|
|
*
|
|
* NOTES:
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
#define XIIF_V123B_READ_DIPR(RegBaseAddress) \
|
|
XIo_In32((RegBaseAddress) + XIIF_V123B_DIPR_OFFSET)
|
|
|
|
/******************************************************************************
|
|
*
|
|
* MACRO:
|
|
*
|
|
* XIIF_V123B_READ_DIIR
|
|
*
|
|
* DESCRIPTION:
|
|
*
|
|
* This function gets the device interrupt ID for the highest priority interrupt
|
|
* which is pending from the interrupt ID register. This function provides
|
|
* priority resolution such that faster interrupt processing is possible.
|
|
* Without priority resolution, it is necessary for the software to read the
|
|
* interrupt pending register and then check each interrupt source to determine
|
|
* if an interrupt is pending. Priority resolution becomes more important as the
|
|
* number of interrupt sources becomes larger.
|
|
*
|
|
* Interrupt priorities are based upon the bit position of the interrupt in the
|
|
* interrupt pending register with bit 0 being the highest priority. The
|
|
* interrupt ID is the priority of the interrupt, 0 - 31, with 0 being the
|
|
* highest priority. The interrupt ID register is live rather than latched such
|
|
* that multiple calls to this function may not yield the same results. A
|
|
* special value, outside of the interrupt priority range of 0 - 31, is
|
|
* contained in the register which indicates that no interrupt is pending. This
|
|
* may be useful for allowing software to continue processing interrupts in a
|
|
* loop until there are no longer any interrupts pending.
|
|
*
|
|
* The interrupt ID is designed to allow a function pointer table to be used
|
|
* in the software such that the interrupt ID is used as an index into that
|
|
* table. The function pointer table could contain an instance pointer, such
|
|
* as to DMA channel, and a function pointer to the function which handles
|
|
* that interrupt. This design requires the interrupt processing of the device
|
|
* driver to be partitioned into smaller more granular pieces based upon
|
|
* hardware used by the device, such as DMA channels and FIFOs.
|
|
*
|
|
* It is not mandatory that this function be used by the device driver software.
|
|
* It may choose to read the pending register and resolve the pending interrupt
|
|
* priorities on it's own.
|
|
*
|
|
* ARGUMENTS:
|
|
*
|
|
* RegBaseAddress contains the base address of the IPIF registers.
|
|
*
|
|
* RETURN VALUE:
|
|
*
|
|
* An interrupt ID, 0 - 31, which identifies the highest priority interrupt
|
|
* which is pending. A value of XIIF_NO_INTERRUPT_ID indicates that there is
|
|
* no interrupt pending. The following values may be used to identify the
|
|
* interrupt ID for the internal IPIF interrupts.
|
|
*
|
|
* XIIF_V123B_ERROR_INTERRUPT_ID Indicates a device error in the IPIF
|
|
*
|
|
* NOTES:
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
#define XIIF_V123B_READ_DIIR(RegBaseAddress) \
|
|
XIo_In32((RegBaseAddress) + XIIF_V123B_DIIR_OFFSET)
|
|
|
|
/******************************************************************************
|
|
*
|
|
* MACRO:
|
|
*
|
|
* XIIF_V123B_GLOBAL_INTR_DISABLE
|
|
*
|
|
* DESCRIPTION:
|
|
*
|
|
* This function disables all interrupts for the device by writing to the global
|
|
* interrupt enable register. This register provides the ability to disable
|
|
* interrupts without any modifications to the interrupt enable register such
|
|
* that it is minimal effort to restore the interrupts to the previous enabled
|
|
* state. The corresponding function, XIpIf_GlobalIntrEnable, is provided to
|
|
* restore the interrupts to the previous enabled state. This function is
|
|
* designed to be used in critical sections of device drivers such that it is
|
|
* not necessary to disable other device interrupts.
|
|
*
|
|
* ARGUMENTS:
|
|
*
|
|
* RegBaseAddress contains the base address of the IPIF registers.
|
|
*
|
|
* RETURN VALUE:
|
|
*
|
|
* None.
|
|
*
|
|
* NOTES:
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
#define XIIF_V123B_GINTR_DISABLE(RegBaseAddress) \
|
|
XIo_Out32((RegBaseAddress) + XIIF_V123B_DGIER_OFFSET, 0)
|
|
|
|
/******************************************************************************
|
|
*
|
|
* MACRO:
|
|
*
|
|
* XIIF_V123B_GINTR_ENABLE
|
|
*
|
|
* DESCRIPTION:
|
|
*
|
|
* This function writes to the global interrupt enable register to enable
|
|
* interrupts from the device. This register provides the ability to enable
|
|
* interrupts without any modifications to the interrupt enable register such
|
|
* that it is minimal effort to restore the interrupts to the previous enabled
|
|
* state. This function does not enable individual interrupts as the interrupt
|
|
* enable register must be set appropriately. This function is designed to be
|
|
* used in critical sections of device drivers such that it is not necessary to
|
|
* disable other device interrupts.
|
|
*
|
|
* ARGUMENTS:
|
|
*
|
|
* RegBaseAddress contains the base address of the IPIF registers.
|
|
*
|
|
* RETURN VALUE:
|
|
*
|
|
* None.
|
|
*
|
|
* NOTES:
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
#define XIIF_V123B_GINTR_ENABLE(RegBaseAddress) \
|
|
XIo_Out32((RegBaseAddress) + XIIF_V123B_DGIER_OFFSET, \
|
|
XIIF_V123B_GINTR_ENABLE_MASK)
|
|
|
|
/******************************************************************************
|
|
*
|
|
* MACRO:
|
|
*
|
|
* XIIF_V123B_IS_GINTR_ENABLED
|
|
*
|
|
* DESCRIPTION:
|
|
*
|
|
* This function determines if interrupts are enabled at the global level by
|
|
* reading the gloabl interrupt register. This register provides the ability to
|
|
* disable interrupts without any modifications to the interrupt enable register
|
|
* such that it is minimal effort to restore the interrupts to the previous
|
|
* enabled state.
|
|
*
|
|
* ARGUMENTS:
|
|
*
|
|
* RegBaseAddress contains the base address of the IPIF registers.
|
|
*
|
|
* RETURN VALUE:
|
|
*
|
|
* XTRUE if interrupts are enabled for the IPIF, XFALSE otherwise.
|
|
*
|
|
* NOTES:
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
#define XIIF_V123B_IS_GINTR_ENABLED(RegBaseAddress) \
|
|
(XIo_In32((RegBaseAddress) + XIIF_V123B_DGIER_OFFSET) == \
|
|
XIIF_V123B_GINTR_ENABLE_MASK)
|
|
|
|
/******************************************************************************
|
|
*
|
|
* MACRO:
|
|
*
|
|
* XIIF_V123B_WRITE_IISR
|
|
*
|
|
* DESCRIPTION:
|
|
*
|
|
* This function sets the IP interrupt status register to the specified value.
|
|
* This register indicates the status of interrupt sources for the IP of the
|
|
* device. The IP is defined as the part of the device that connects to the
|
|
* IPIF. The status is independent of whether interrupts are enabled such that
|
|
* the status register may also be polled when interrupts are not enabled.
|
|
*
|
|
* Each bit of the register correlates to a specific interrupt source within the
|
|
* IP. All bits of this register are latched. Setting a bit which is zero
|
|
* within this register causes an interrupt to be generated. The device global
|
|
* interrupt enable register and the device interrupt enable register must be set
|
|
* appropriately to allow an interrupt to be passed out of the device. The
|
|
* interrupt is cleared by writing to this register with the bits to be
|
|
* cleared set to a one and all others to zero. This register implements a
|
|
* toggle on write functionality meaning any bits which are set in the value
|
|
* written cause the bits in the register to change to the opposite state.
|
|
*
|
|
* This function writes only the specified value to the register such that
|
|
* some status bits may be set and others cleared. It is the caller's
|
|
* responsibility to get the value of the register prior to setting the value
|
|
* to prevent an destructive behavior.
|
|
*
|
|
* ARGUMENTS:
|
|
*
|
|
* RegBaseAddress contains the base address of the IPIF registers.
|
|
*
|
|
* Status contains the value to be written to the IP interrupt status
|
|
* register. The bit definitions are specific to the device IP.
|
|
*
|
|
* RETURN VALUE:
|
|
*
|
|
* None.
|
|
*
|
|
* NOTES:
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
#define XIIF_V123B_WRITE_IISR(RegBaseAddress, Status) \
|
|
XIo_Out32((RegBaseAddress) + XIIF_V123B_IISR_OFFSET, (Status))
|
|
|
|
/******************************************************************************
|
|
*
|
|
* MACRO:
|
|
*
|
|
* XIIF_V123B_READ_IISR
|
|
*
|
|
* DESCRIPTION:
|
|
*
|
|
* This function gets the contents of the IP interrupt status register.
|
|
* This register indicates the status of interrupt sources for the IP of the
|
|
* device. The IP is defined as the part of the device that connects to the
|
|
* IPIF. The status is independent of whether interrupts are enabled such
|
|
* that the status register may also be polled when interrupts are not enabled.
|
|
*
|
|
* Each bit of the register correlates to a specific interrupt source within the
|
|
* device. All bits of this register are latched. Writing a 1 to a bit within
|
|
* this register causes an interrupt to be generated if enabled in the interrupt
|
|
* enable register and the global interrupt enable is set. Since the status is
|
|
* latched, each status bit must be acknowledged in order for the bit in the
|
|
* status register to be updated. Each bit can be acknowledged by writing a
|
|
* 0 to the bit in the status register.
|
|
|
|
* ARGUMENTS:
|
|
*
|
|
* RegBaseAddress contains the base address of the IPIF registers.
|
|
*
|
|
* RETURN VALUE:
|
|
*
|
|
* A status which contains the value read from the IP interrupt status register.
|
|
* The bit definitions are specific to the device IP.
|
|
*
|
|
* NOTES:
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
#define XIIF_V123B_READ_IISR(RegBaseAddress) \
|
|
XIo_In32((RegBaseAddress) + XIIF_V123B_IISR_OFFSET)
|
|
|
|
/******************************************************************************
|
|
*
|
|
* MACRO:
|
|
*
|
|
* XIIF_V123B_WRITE_IIER
|
|
*
|
|
* DESCRIPTION:
|
|
*
|
|
* This function sets the IP interrupt enable register contents. This register
|
|
* controls which interrupt sources of the IP are allowed to generate an
|
|
* interrupt. The global interrupt enable register and the device interrupt
|
|
* enable register must also be set appropriately for an interrupt to be
|
|
* passed out of the device containing the IPIF and the IP.
|
|
*
|
|
* Each bit of the register correlates to a specific interrupt source within the
|
|
* IP. Setting a bit in this register enables the interrupt source to generate
|
|
* an interrupt. Clearing a bit in this register disables interrupt generation
|
|
* for that interrupt source.
|
|
*
|
|
* This function writes only the specified value to the register such that
|
|
* some interrupt sources may be enabled and others disabled. It is the
|
|
* caller's responsibility to get the value of the interrupt enable register
|
|
* prior to setting the value to prevent an destructive behavior.
|
|
*
|
|
* ARGUMENTS:
|
|
*
|
|
* RegBaseAddress contains the base address of the IPIF registers.
|
|
*
|
|
* Enable contains the value to be written to the IP interrupt enable register.
|
|
* The bit definitions are specific to the device IP.
|
|
*
|
|
* RETURN VALUE:
|
|
*
|
|
* None.
|
|
*
|
|
* NOTES:
|
|
*
|
|
* None.
|
|
*
|
|
******************************************************************************/
|
|
#define XIIF_V123B_WRITE_IIER(RegBaseAddress, Enable) \
|
|
XIo_Out32((RegBaseAddress) + XIIF_V123B_IIER_OFFSET, (Enable))
|
|
|
|
/******************************************************************************
|
|
*
|
|
* MACRO:
|
|
*
|
|
* XIIF_V123B_READ_IIER
|
|
*
|
|
* DESCRIPTION:
|
|
*
|
|
*
|
|
* This function gets the IP interrupt enable register contents. This register
|
|
* controls which interrupt sources of the IP are allowed to generate an
|
|
* interrupt. The global interrupt enable register and the device interrupt
|
|
* enable register must also be set appropriately for an interrupt to be
|
|
* passed out of the device containing the IPIF and the IP.
|
|
*
|
|
* Each bit of the register correlates to a specific interrupt source within the
|
|
* IP. Setting a bit in this register enables the interrupt source to generate
|
|
* an interrupt. Clearing a bit in this register disables interrupt generation
|
|
* for that interrupt source.
|
|
*
|
|
* ARGUMENTS:
|
|
*
|
|
* RegBaseAddress contains the base address of the IPIF registers.
|
|
*
|
|
* RETURN VALUE:
|
|
*
|
|
* The contents read from the IP interrupt enable register. The bit definitions
|
|
* are specific to the device IP.
|
|
*
|
|
* NOTES:
|
|
*
|
|
* Signature: u32 XIIF_V123B_READ_IIER(u32 RegBaseAddress)
|
|
*
|
|
******************************************************************************/
|
|
#define XIIF_V123B_READ_IIER(RegBaseAddress) \
|
|
XIo_In32((RegBaseAddress) + XIIF_V123B_IIER_OFFSET)
|
|
|
|
/************************** Function Prototypes ******************************/
|
|
|
|
/*
|
|
* Initialization Functions
|
|
*/
|
|
XStatus XIpIfV123b_SelfTest(u32 RegBaseAddress, u8 IpRegistersWidth);
|
|
|
|
#endif /* end of protection macro */
|