mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-16 23:18:51 +09:00
435 lines
12 KiB
C
435 lines
12 KiB
C
/*
|
|
* (C) Copyright 2001
|
|
* Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*************************************************************************
|
|
* adaption for the Marvell DB64460 Board
|
|
* Ingo Assmus (ingo.assmus@keymile.com)
|
|
*************************************************************************/
|
|
|
|
/* sdram_init.c - automatic memory sizing */
|
|
|
|
#include <common.h>
|
|
#include <74xx_7xx.h>
|
|
#include "../../Marvell/include/memory.h"
|
|
#include "../../Marvell/include/pci.h"
|
|
#include "../../Marvell/include/mv_gen_reg.h"
|
|
#include <net.h>
|
|
|
|
#include "eth.h"
|
|
#include "mpsc.h"
|
|
#include "../../Marvell/common/i2c.h"
|
|
#include "64460.h"
|
|
#include "mv_regs.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#undef DEBUG
|
|
#define MAP_PCI
|
|
|
|
#ifdef DEBUG
|
|
#define DP(x) x
|
|
#else
|
|
#define DP(x)
|
|
#endif
|
|
|
|
int set_dfcdlInit (void); /* setup delay line of Mv64460 */
|
|
int mvDmaIsChannelActive (int);
|
|
int mvDmaSetMemorySpace (ulong, ulong, ulong, ulong, ulong);
|
|
int mvDmaTransfer (int, ulong, ulong, ulong, ulong);
|
|
|
|
#define D_CACHE_FLUSH_LINE(addr, offset) \
|
|
{ \
|
|
__asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
|
|
}
|
|
|
|
int memory_map_bank (unsigned int bankNo,
|
|
unsigned int bankBase, unsigned int bankLength)
|
|
{
|
|
#if defined (MAP_PCI) && defined (CONFIG_PCI)
|
|
PCI_HOST host;
|
|
#endif
|
|
|
|
#ifdef DEBUG
|
|
if (bankLength > 0) {
|
|
printf ("mapping bank %d at %08x - %08x\n",
|
|
bankNo, bankBase, bankBase + bankLength - 1);
|
|
} else {
|
|
printf ("unmapping bank %d\n", bankNo);
|
|
}
|
|
#endif
|
|
|
|
memoryMapBank (bankNo, bankBase, bankLength);
|
|
|
|
#if defined (MAP_PCI) && defined (CONFIG_PCI)
|
|
for (host = PCI_HOST0; host <= PCI_HOST1; host++) {
|
|
const int features =
|
|
PREFETCH_ENABLE |
|
|
DELAYED_READ_ENABLE |
|
|
AGGRESSIVE_PREFETCH |
|
|
READ_LINE_AGGRESSIVE_PREFETCH |
|
|
READ_MULTI_AGGRESSIVE_PREFETCH |
|
|
MAX_BURST_4 | PCI_NO_SWAP;
|
|
|
|
pciMapMemoryBank (host, bankNo, bankBase, bankLength);
|
|
|
|
pciSetRegionSnoopMode (host, bankNo, PCI_SNOOP_WB, bankBase,
|
|
bankLength);
|
|
|
|
pciSetRegionFeatures (host, bankNo, features, bankBase,
|
|
bankLength);
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Check memory range for valid RAM. A simple memory test determines
|
|
* the actually available RAM size between addresses `base' and
|
|
* `base + maxsize'. Some (not all) hardware errors are detected:
|
|
* - short between address lines
|
|
* - short between data lines
|
|
*/
|
|
long int dram_size (long int *base, long int maxsize)
|
|
{
|
|
volatile long int *addr, *b = base;
|
|
long int cnt, val, save1, save2;
|
|
|
|
#define STARTVAL (1<<20) /* start test at 1M */
|
|
for (cnt = STARTVAL / sizeof (long); cnt < maxsize / sizeof (long);
|
|
cnt <<= 1) {
|
|
addr = base + cnt; /* pointer arith! */
|
|
|
|
save1 = *addr; /* save contents of addr */
|
|
save2 = *b; /* save contents of base */
|
|
|
|
*addr = cnt; /* write cnt to addr */
|
|
*b = 0; /* put null at base */
|
|
|
|
/* check at base address */
|
|
if ((*b) != 0) {
|
|
*addr = save1; /* restore *addr */
|
|
*b = save2; /* restore *b */
|
|
return (0);
|
|
}
|
|
val = *addr; /* read *addr */
|
|
val = *addr; /* read *addr */
|
|
|
|
*addr = save1;
|
|
*b = save2;
|
|
|
|
if (val != cnt) {
|
|
DP (printf
|
|
("Found %08x at Address %08x (failure)\n",
|
|
(unsigned int) val, (unsigned int) addr));
|
|
/* fix boundary condition.. STARTVAL means zero */
|
|
if (cnt == STARTVAL / sizeof (long))
|
|
cnt = 0;
|
|
return (cnt * sizeof (long));
|
|
}
|
|
}
|
|
|
|
return maxsize;
|
|
}
|
|
|
|
#define SDRAM_NORMAL 0x0
|
|
#define SDRAM_PRECHARGE_ALL 0x1
|
|
#define SDRAM_REFRESH_ALL 0x2
|
|
#define SDRAM_MODE_REG_SETUP 0x3
|
|
#define SDRAM_XTEN_MODE_REG_SETUP 0x4
|
|
#define SDRAM_NOP 0x5
|
|
#define SDRAM_SELF_REFRESH 0x7
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
int tmp;
|
|
int start;
|
|
ulong size;
|
|
ulong memSpaceAttr;
|
|
ulong dest;
|
|
|
|
/* first disable all banks */
|
|
memory_map_bank(0, 0, 0);
|
|
memory_map_bank(1, 0, 0);
|
|
memory_map_bank(2, 0, 0);
|
|
memory_map_bank(3, 0, 0);
|
|
|
|
/* calibrate delay lines */
|
|
set_dfcdlInit();
|
|
|
|
GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_NOP); /* 0x1418 */
|
|
do {
|
|
tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
|
|
} while(tmp != 0x0);
|
|
|
|
/* SDRAM controller configuration */
|
|
#ifdef CONFIG_MV64460_ECC
|
|
GT_REG_WRITE(MV64460_SDRAM_CONFIG, 0x58201400); /* 0x1400 */
|
|
#else
|
|
GT_REG_WRITE(MV64460_SDRAM_CONFIG, 0x58200400); /* 0x1400 */
|
|
#endif
|
|
GT_REG_WRITE(MV64460_D_UNIT_CONTROL_LOW, 0xC3000540); /* 0x1404 */
|
|
GT_REG_WRITE(MV64460_D_UNIT_CONTROL_HIGH, 0x0300F777); /* 0x1424 */
|
|
GT_REG_WRITE(MV64460_SDRAM_TIMING_CONTROL_LOW, 0x01712220); /* 0x1408 */
|
|
GT_REG_WRITE(MV64460_SDRAM_TIMING_CONTROL_HIGH, 0x0000005D); /* 0x140C */
|
|
GT_REG_WRITE(MV64460_SDRAM_ADDR_CONTROL, 0x00000012); /* 0x1410 */
|
|
GT_REG_WRITE(MV64460_SDRAM_OPEN_PAGES_CONTROL, 0x00000001); /* 0x1414 */
|
|
|
|
/* SDRAM drive strength */
|
|
GT_REG_WRITE(MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x80000000); /* 0x14C0 */
|
|
GT_REG_WRITE(MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x80000008); /* 0x14C0 */
|
|
GT_REG_WRITE(MV64460_SDRAM_DATA_PADS_CALIBRATION, 0x80000000); /* 0x14C4 */
|
|
GT_REG_WRITE(MV64460_SDRAM_DATA_PADS_CALIBRATION, 0x80000008); /* 0x14C4 */
|
|
|
|
/* setup SDRAM device registers */
|
|
|
|
/* precharge all */
|
|
GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_PRECHARGE_ALL); /* 0x1418 */
|
|
do {
|
|
tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
|
|
} while(tmp != 0x0);
|
|
|
|
/* enable DLL */
|
|
GT_REG_WRITE(MV64460_EXTENDED_DRAM_MODE, 0x00000000); /* 0x1420 */
|
|
GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_XTEN_MODE_REG_SETUP); /* 0x1418 */
|
|
do {
|
|
tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
|
|
} while(tmp != 0x0);
|
|
|
|
/* reset DLL */
|
|
GT_REG_WRITE(MV64460_SDRAM_MODE, 0x00000132); /* 0x141C */
|
|
GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_MODE_REG_SETUP); /* 0x1418 */
|
|
do {
|
|
tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
|
|
} while(tmp != 0x0);
|
|
|
|
/* precharge all */
|
|
GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_PRECHARGE_ALL); /* 0x1418 */
|
|
do {
|
|
tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
|
|
} while(tmp != 0x0);
|
|
|
|
/* wait for 2 auto refresh commands */
|
|
udelay(20);
|
|
|
|
/* un-reset DLL */
|
|
GT_REG_WRITE(MV64460_SDRAM_MODE, 0x00000032); /* 0x141C */
|
|
GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_MODE_REG_SETUP); /* 0x1418 */
|
|
do {
|
|
tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
|
|
} while(tmp != 0x0);
|
|
|
|
/* wait 200 cycles */
|
|
udelay(2); /* FIXME make this dynamic for the system clock */
|
|
|
|
/* SDRAM init done */
|
|
memory_map_bank(0, CONFIG_SYS_SDRAM_BASE, (256 << 20));
|
|
#ifdef CONFIG_SYS_SDRAM1_BASE
|
|
memory_map_bank(1, CONFIG_SYS_SDRAM1_BASE, (256 << 20));
|
|
#endif
|
|
|
|
/* DUNIT_MMASK: enable SnoopHitEn bit to avoid errata CPU-#4
|
|
*/
|
|
tmp = GTREGREAD(MV64460_D_UNIT_MMASK); /* 0x14B0 */
|
|
GT_REG_WRITE(MV64460_D_UNIT_MMASK, tmp | 0x2);
|
|
|
|
start = (0 << 20);
|
|
#ifdef CONFIG_P3M750
|
|
size = (512 << 20);
|
|
#elif defined (CONFIG_P3M7448)
|
|
size = (128 << 20);
|
|
#endif
|
|
|
|
#ifdef CONFIG_MV64460_ECC
|
|
memSpaceAttr = ((~(BIT0 << 0)) & 0xf) << 8;
|
|
mvDmaSetMemorySpace (0, 0, memSpaceAttr, start, size);
|
|
for (dest = start; dest < start + size; dest += _8M) {
|
|
mvDmaTransfer (0, start, dest, _8M,
|
|
BIT8 /*DMA_DTL_128BYTES */ |
|
|
BIT3 /*DMA_HOLD_SOURCE_ADDR */ |
|
|
BIT11 /*DMA_BLOCK_TRANSFER_MODE */ );
|
|
while (mvDmaIsChannelActive (0));
|
|
}
|
|
#endif
|
|
|
|
return (size);
|
|
}
|
|
|
|
void board_add_ram_info(int use_default)
|
|
{
|
|
u32 val;
|
|
|
|
puts(" (CL=");
|
|
switch ((GTREGREAD(MV64460_SDRAM_MODE) >> 4) & 0x7) {
|
|
case 0x2:
|
|
puts("2");
|
|
break;
|
|
case 0x3:
|
|
puts("3");
|
|
break;
|
|
case 0x5:
|
|
puts("1.5");
|
|
break;
|
|
case 0x6:
|
|
puts("2.5");
|
|
break;
|
|
}
|
|
|
|
val = GTREGREAD(MV64460_SDRAM_CONFIG);
|
|
|
|
puts(", ECC ");
|
|
if (val & 0x00001000)
|
|
puts("enabled)");
|
|
else
|
|
puts("not enabled)");
|
|
}
|
|
|
|
/*
|
|
* mvDmaIsChannelActive - Check if IDMA channel is active
|
|
*
|
|
* channel = IDMA channel number from 0 to 7
|
|
*/
|
|
int mvDmaIsChannelActive (int channel)
|
|
{
|
|
ulong data;
|
|
|
|
data = GTREGREAD (MV64460_DMA_CHANNEL0_CONTROL + 4 * channel);
|
|
if (data & BIT14) /* activity status */
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* mvDmaSetMemorySpace - Set a DMA memory window for the DMA's address decoding
|
|
* map.
|
|
*
|
|
* memSpace = IDMA memory window number from 0 to 7
|
|
* trg_if = Target interface:
|
|
* 0x0 DRAM
|
|
* 0x1 Device Bus
|
|
* 0x2 Integrated SDRAM (or CPU bus 60x only)
|
|
* 0x3 PCI0
|
|
* 0x4 PCI1
|
|
* attr = IDMA attributes (see MV datasheet)
|
|
* base_addr = Sets up memory window for transfers
|
|
*
|
|
*/
|
|
int mvDmaSetMemorySpace (ulong memSpace,
|
|
ulong trg_if,
|
|
ulong attr, ulong base_addr, ulong size)
|
|
{
|
|
ulong temp;
|
|
|
|
/* The base address must be aligned to the size. */
|
|
if (base_addr % size != 0)
|
|
return 0;
|
|
|
|
if (size >= 0x10000) { /* 64K */
|
|
size &= 0xffff0000;
|
|
base_addr = (base_addr & 0xffff0000);
|
|
/* Set the new attributes */
|
|
GT_REG_WRITE (MV64460_DMA_BASE_ADDR_REG0 + memSpace * 8,
|
|
(base_addr | trg_if | attr));
|
|
GT_REG_WRITE ((MV64460_DMA_SIZE_REG0 + memSpace * 8),
|
|
(size - 1) & 0xffff0000);
|
|
temp = GTREGREAD (MV64460_DMA_BASE_ADDR_ENABLE_REG);
|
|
GT_REG_WRITE (DMA_BASE_ADDR_ENABLE_REG,
|
|
(temp & ~(BIT0 << memSpace)));
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* mvDmaTransfer - Transfer data from src_addr to dst_addr on one of the 4
|
|
* DMA channels.
|
|
*
|
|
* channel = IDMA channel number from 0 to 3
|
|
* destAddr = Destination address
|
|
* sourceAddr = Source address
|
|
* size = Size in bytes
|
|
* command = See MV datasheet
|
|
*
|
|
*/
|
|
int mvDmaTransfer (int channel, ulong sourceAddr,
|
|
ulong destAddr, ulong size, ulong command)
|
|
{
|
|
ulong engOffReg = 0; /* Engine Offset Register */
|
|
|
|
if (size > 0xffff)
|
|
command = command | BIT31; /* DMA_16M_DESCRIPTOR_MODE */
|
|
command = command | ((command >> 6) & 0x7);
|
|
engOffReg = channel * 4;
|
|
GT_REG_WRITE (MV64460_DMA_CHANNEL0_BYTE_COUNT + engOffReg, size);
|
|
GT_REG_WRITE (MV64460_DMA_CHANNEL0_SOURCE_ADDR + engOffReg, sourceAddr);
|
|
GT_REG_WRITE (MV64460_DMA_CHANNEL0_DESTINATION_ADDR + engOffReg, destAddr);
|
|
command = command |
|
|
BIT12 | /* DMA_CHANNEL_ENABLE */
|
|
BIT9; /* DMA_NON_CHAIN_MODE */
|
|
/* Activate DMA channel By writting to mvDmaControlRegister */
|
|
GT_REG_WRITE (MV64460_DMA_CHANNEL0_CONTROL + engOffReg, command);
|
|
return 1;
|
|
}
|
|
|
|
/****************************************************************************************
|
|
* SDRAM INIT *
|
|
* This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb *
|
|
* This procedure fits only the Atlantis *
|
|
* *
|
|
***************************************************************************************/
|
|
|
|
/****************************************************************************************
|
|
* DFCDL initialize MV643xx Design Considerations *
|
|
* *
|
|
***************************************************************************************/
|
|
int set_dfcdlInit (void)
|
|
{
|
|
int i;
|
|
|
|
/* Values from MV64460 User Manual */
|
|
unsigned int dfcdl_tbl[] = { 0x00000000, 0x00000001, 0x00000042, 0x00000083,
|
|
0x000000c4, 0x00000105, 0x00000146, 0x00000187,
|
|
0x000001c8, 0x00000209, 0x0000024a, 0x0000028b,
|
|
0x000002cc, 0x0000030d, 0x0000034e, 0x0000038f,
|
|
0x000003d0, 0x00000411, 0x00000452, 0x00000493,
|
|
0x000004d4, 0x00000515, 0x00000556, 0x00000597,
|
|
0x000005d8, 0x00000619, 0x0000065a, 0x0000069b,
|
|
0x000006dc, 0x0000071d, 0x0000075e, 0x0000079f,
|
|
0x000007e0, 0x00000821, 0x00000862, 0x000008a3,
|
|
0x000008e4, 0x00000925, 0x00000966, 0x000009a7,
|
|
0x000009e8, 0x00000a29, 0x00000a6a, 0x00000aab,
|
|
0x00000aec, 0x00000b2d, 0x00000b6e, 0x00000baf,
|
|
0x00000bf0, 0x00000c31, 0x00000c72, 0x00000cb3,
|
|
0x00000cf4, 0x00000d35, 0x00000d76, 0x00000db7,
|
|
0x00000df8, 0x00000e39, 0x00000e7a, 0x00000ebb,
|
|
0x00000efc, 0x00000f3d, 0x00000f7e, 0x00000fbf };
|
|
|
|
for (i = 0; i < 64; i++)
|
|
GT_REG_WRITE (SRAM_DATA0, dfcdl_tbl[i]);
|
|
GT_REG_WRITE (DFCDL_CONFIG0, 0x00300000); /* enable dynamic delay line updating */
|
|
|
|
return (0);
|
|
}
|